Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Products Used
Bisque
MB-1117 - Casualware Charger Plate
Color
FN-001 - White
SC-2 - Melon-Choly
SC-15 - Tuxedo
SC-16 - Cotton Tail
SC-20 - Birthday SuitSC-27 - Sour Apple
SC-36 - Irish Luck
SC-55 - Yella Bout It
SC-60 - Silver Lining
SC-65 - Peri-TwinkleSC-73 - Candy Apple Red
SC-74 - Hot Tamale
Decorating Accessories
AC-230 - Clay Carbon PaperBT-910 - Synthetic Sponges
CB-106 - #6 Script Liner
CB-110 - #10/0 LinerCB-604 - #4 Soft Fan
CB-618 - #8 Soft Fan
Additional Materials
Pencil
Stiff ToothbrushDownload Pattern: Santa
Project Info
Designer: Staff Artist
Skill Level: IntermediateTime: 3 hours
Santa Cookie Plate
Some Pepperidge Farm Milanos would be nice . . .
Instructions
1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any
dust.
2. Using a CB-618 #8 Soft Fan, apply 1 coat of FN-001 White to the entire front of plate and 3 coats to
back. Allow to dry.
3. With a pencil and AC-230 Clay Carbon Paper, trace the Santa Pattern on the plate.
4. Using a CB-604 #4 Soft Fan, apply 2 coats of SC-36 Irish Luck to sky area.
5. Using a CB-106 #6 Script Liner, apply 1 coat of SC-27 Sour Apple and SC-73 Candy Apple Red to
the stripes on the hat.
6. Using a CB-106 #6 Script Liner, apply 1 more coat of SC-27 Sour Apple to the hat stripes. Then while
wet, blend in SC-36 Irish Luck, 1 stripe at a time. Also on edges of the hat near the sky, brush in the SC-
36 Irish Luck and pull out into sky creating a rough edge.7. Using a CB-106 #6 Script Liner, apply 1 more coat of SC-73 Candy Apple Red. Then while wet blend
in SC-74 Hot Tamale 1 stripe at a time. Also on edges of the hat near the sky, brush SC-36 Irish Luck
into the SC-73 Candy Apple Red and pull into sky creating a rough edge.
8. Using a CB-106 #6 Script Liner, apply some SC-36 Irish Luck to the bottom edge of hat, strokingupwards by the white band. Let dry. Water down SC-36 Irish Luck and paint a line over the bottom edgeof hat.
9. Using a CB-106 #6 Script Liner, apply 2 coats of SC-20 Birthday Suit to the face area. Overlap someinto what will be white areas of the hat, beard, and mustache. While second coat is still wet brush watered
down SC-2 Melon Choly into the cheek and lip areas.10. Using a CB-604 #4 Soft Fan, apply 1 coat of SC-16 Cotton Tail to the ball and rim of hat, eyebrows,
mustache and beard.11. Glazing one area at a time, use a CB-604 #4 Soft Fan and apply 1 coat of SC-16 Cotton Tail to the ball
and rim of hat, eyebrows, mustache and beard. While it is wet, using a CB-106 #6 Script Liner, applywatered down SC-55 Yella Bout It, SC-65 Peri-Twinkle and SC-60 Silver Lining to create a little color,
toning and shadow in white areas.12. Using a CB-106 #6 Script Liner, apply a thin line of SC-36 Irish Luck between the stripes of colors of
the hat. Using a CB-110 #10/0 Liner apply some smaller, not continuous, lines with slightly watered down
SC-15 Tuxedo to same area.13. Using a CB-110 #10/0 Liner apply slightly watered down SC-15 Tuxedo in thin wispy lines around all
white areas, nose and mouth. Use full strength SC-15 Tuxedo and paint in eyes.14. Use a toothbrush to splatter SC-16 Cotton Tail onto the plate, primarily to the sky and hat
15. Using a CB-106 #6 Script Liner, apply 1 coat of SC-16 Cotton Tail to make stars and snowflakes. Letdry and apply a second coat.
16. Using a CB-106 #6 Script Liner, apply 1 coat of SC-16 Cotton Tail in dots around the stars. Use fullstrength SC-16 Cotton Tail close to the stars and water down white as you go out farther.
17. Allow to dry.18. Stilt and fire to shelf cone 06.
MB-1117Santa PatternPage 1 of 2
MB-1117Santa PatternPage 2 of 2