SANKHLA ENGINEERS & CONTRACTORS2.imimg.com/data2/RR/PV/MY-/sankhla-engineers-comp… · · 2014-06-01SANKHLA ENGINEERS & CONTRACTORS ( Electrical Enginers & Contrctors) G-127,Riico

SANKHLA ENGINEERS & CONTRACTORS ( Electrical Enginers & Contrctors)

G-127,Riico indl Area,P-II,Neemrana,Raj ,India(301705)

P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]

www.sankhlaengineers.com

----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------

We are providing a complete Electrical Solution for Industry

Sankhla Engineers & Contractors

( Electrical Engineers & Contactors)

H.K.Sankhla Electrical Engineer

[email protected] [email protected]

[email protected] (09214312270)



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


RESUME OF OUR COMPANY

NAME OF ORGANISATION : SANKHLA ENGINEERS & CONTRACTORS

WORKS/FACTORY : G-127,RIICO Indl Area,Neemrana,Raj (301705)

Mobile No : 9214312270

REG.OFFICE : Opposite yadav Dharamshala,Near Bus

Stand,Behror,Alwar,Raj(301701)

YEAR OF ESTABLISHMENT : 2006.

TECHNICAL QUALIFICATON : Engineers, Contractors & Consultants in

desingning, erection and commissioning of

electrical projects.

E. S. I. NO. : 15 00 033608 000 1001/2011/REV I

RST/CST/TIN NO. : 08300702619

SERVICE TAX NO. : AMBPD5963AST001

PAN NO. : AMBPD5963A

Electrical Licence No. : 5429A valid upto 2031

(RAJ)

BANKERS : STATE BANK OF INDIA,

ICICI BANK,

AUDITORS GROUP : Rakesh Kailash & Associates,Alwar

Maximum Turn Over (Amount) : Rs. 2.0 Cores

NUMBER OF EMPLOYEE : Engineers Admin Staff Skilled/Unskilled

4 5 25

Supervoisor/Tech Staff Design/Dwg

4 1



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


Work Profile We are dealing in plant Errection, commissioning , Wiring of all Electrical Equipments . We have a good & sound team for all type of LT, HT and Cabling Works & Fabrication i.e. A sound Engineer, Supervisor, Forman & wire mans. In our team we have a good cable jointer termination, Cable laying, earthing job, Perforated cable tray laying jobs etc. A good working experience of LT & HT Commissioning.

List of Our Few Clients :- 1.Dura Line India Pvt Ltd,Neemrana,Raj 2.Otsuka Chemicals Ltd,,Keswana,Raj 3.Havells India Ltd,EPIP,Neemrana,Raj 4.Mercury Fabrics (P)Ltd,Bawal,HR 5.Medalon InfoTech (P) Ltd,Bawal,HR 6.Fiesta Automobiles (P) Ltd,Bawal,HR 7.Goindi Engineering Works (P) Ltd,Bawal,HR 8.Alchem International Ltd,Neemrana,RAJ 9.Talbros Automotive Ltd,Bawal,HR 10.SAKA India (P) Ltd,Bawal,HR 11.Harvel Agua India Pvt Ltd,Bawal,HR 12.AMD Industries Ltd,Neemrana,Raj 13.Tenneco RC India Pvt Ltd,Bawal,HR 14.MKJ Fashion (P)Ltd,Bawal,HR 15.SONA Fuji Kiko Automotive Ltd,Bawal,HR 16.Kehin Fie India (P)Ltd,Bawal,HR



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


17.Lapro Harbals (P)Ltd,Panipat,HR 18.Nissin India Pvt Ltd,Neemrana,Raj 19.Asahi India Safety Glass Ltd,Bawal,Hr 20.Ahresty India Pvt Ltd,Bawal,Hr 21.E&H Precission India Pvt Ltd,Neemrana,Raj 22.Nihon Parkerizing india Pvt Ltd,Neemrana,Raj 23.Nippn Steel India Pvt Ltd,Neemrana,Raj 24.Dainichi India Pvt Ltd,Neemrana,Raj 25.Takhata Precission India Pvt Ltd,Neemrana,Raj For Sankhla Engineers & Contractors (H.K.Sankhla)



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


Content:-

1. Introduction and vision statement.

2. Profile of promoters and Management.

3. Areas of activity.

4. Company Organization Chart.

5. Site safety

6. Safety Rules

7. Environmental Policy

8. Safety & security

9. Our Bankers

The SEC Vision To become a service provider of choice to clients through competent and efficient

practices, by achieving the highest of quality standards, to help clients meet business

goals.

People Power

A strong thread of quality that runs through the very fabric of SEC is its people strength -the Company’s single most prominent asset. Premium workmanship is a deliverable assured at every level of job process. SEC’s dynamic40 strong team of managers, engineers, supervisors and technicians, led by a techno-savvy management with over years of rich experience, is large enough to deliver excellence, while remaining compact enough to be responsive to the needs of individual customers, in today’s changing business environment.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


2. Profile of Promoters and Management SEC is promoted by young and ambitious Engineers. These are qualified Electrical Engineer. He decided to realize his entrepreneurial vision. This led him to set up a small company –Sankhla Engineers & Contractors in the year 2006. Every effort has been made to develop the business of SEC to secure its place in Delhi and other parts of Haryana, Rajasthan as an electrical contractor with a difference.

3. AREAS OF ACTIVITY

SEC SEC is engaged in turnkey electrical & Instrumentation contracts for large

industrial buildings .

i)LT/HT Panels,DBs

ii)Industrial Luminary Solutions/LED Lighting

iii)LT/HT Cables, Termination Kits & Wires

iv)Earthing Solutions(GI/CU Earthing,GEL Earthing)

v)DGs/Motors/Drives

vi)Transformers /Servo Stabilizers/CT,PT Units

vii)Transformer Oil Testing & Dehydration.

viii)LT/HT Rubber Mats

ix)Tubular/Octagonal Poles



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


x)Energy Audit

xi)Industrial UPS

Xii)Fire Alarm Systems

Highlights:-

1.MEDALLION INFOTECH PVT LTD,BAWAL,HR 2.HARVEL AGUA INDIA PVT LTD,BAWAL,HR 3.AMD INDUSTRIES PVT LTD,NEEMRANA,RAJ 4.ALCHEM INTERNATIONAL LTD,NEEMRANA,RAJ 5.OTSUKA CHEMICALS INDUSTRIES PVT LTD,KESWANA RAJPUT,RAJ 6.ASAHI INDIA GLASS LTD,BAWAL,HR Project Completed:- 1.M/S Medallion InfoTech Pvt Ltd,HSIDC,Bawal,HR( COMPLETED)(Project Cost Rs.65 Lak) * Installation & Commissioning OF 1000KVA ,11KV Transformer/HT Panel/RTCC Panel/2 Pole structures /HT CABLE/HT CT /PT CUBICAL PANEL/HT TERMINATION in HT Side. **INSTALLATION & COMMISSIONING OF LT PANELS ***SUPPLY & INSTALLATION COMMISSIONING OF INTERNAL LIGHTING/LIGHTING PROTECTION SYSTEM/EXTERNAL LIGHTING POLES & LIGHTING/POWDER COATED CABLE TRAYS ****SUPPLY & INSTALLATION COMMISSIONING OF WIRE LESS FIRE ALARM SYSTEMS .(90 ZONE PANEL) *****INSTALLATION & COMMISSIONING OF 1X380KVA & 1X500KVA CUMMINS MAKE DGS . ******SUPPLY & INSTALLATION COMMISSIONING OF TELEPHONE & DATA SYSTEM. *******SUPPLY & INSTALLATION COMMISSIONING OF EARTHING SYSTEMS/GEL EARTHINGS.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


2.M/S Harvel Agua India Pvt Ltd,HSIDC,Bawal,Hr (Completed) (Project Cost 56 Lak) * Installation & Commissioning OF 1000KVA ,11KV Transformer/HT panel/RTCC Panel/ **SUPPLY INSTALLATION & COMMISSIONING OF 2X2 Pole structures /HT CABLE/HT TERMINATION in HT Side. **SUPPLY INSTALLATION & COMMISSIONING OF 300KVAR CAPACITOR PANEL/LT PANELS/CABLE TRAYS/INTERNAL LIGHTING/LIGHTING PROTECTION SYSTEM/EXTERNAL LIGHTING POLES & LIGHTING/ *****INSTALLATION & COMMISSIONING OF 1X380KVA & 1X45KVA CUMMINS MAKE DGS . ******SUPPLY & INSTALLATION COMMISSIONING OF TELEPHONE & DATA SYSTEM.* *******SUPPLY & INSTALLATION COMMISSIONING OG EARTHING SYSTEMS. 3.M/S AMD Industries Pvt Ltd,RIICO ,Neemrama,Raj(Completed) (Project Cost Rs.30Lak)2nd Revised order Running * INSTALLATION & COMMISSIONING OF 1X2000KVA ,33KV TRANSFORMER/HT PANEL/RTCC PANEL/HT CABLE/ **SUPPLY INSTALLATION & COMMISSIONING OF 4 POLE STRUCTURES /HT TERMINATION IN HT SIDE. **INSTALLATION & COMMISSIONING OF 300KVAR CAPACITOR PANEL/LT PANELS *****INSTALLATION & COMMISSIONING OF 1X1000KVA & 1X500KVA CAT MAKE DGS WITH SYNCHRONISATION PANEL. *******SUPPLY & INSTALLATION COMMISSIONING OG EARTHING SYSTEMS/POWDER COATED CABLE TRAY.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


4.M/S Alchem International Ltd,Neemrana,Raj(Completed)2nd Revised Order(Project Order Cost Rs.150 Laks)Completed. *Supply Installation Testing & Commissioning of HT as well as LT part with Design & Electrical Consultancy with Drawings. *Supply of HT and LT Panels with Design Installation Testing & Commissioning . *Supply Installation Testing & commissioning of Cables ie HT Cables /LT cables /Wiring etc. 5.M/S Otsuka Chemicals Ltd,Keswana Rajput,Raj (Project Cost Rs.20Laks)Third Revised Order 6. M/S Asahi India Glass Ltd,Bawal,HR (Project Cost Rs.150laks)Running ** INSTALLATION & COMMISSIONING OF 1X250KVA TRF, 2X2500KVA,1X1000KVA 3.3KV TRANSFORMER **3.3KV HT PANEL 2NOS IC ,1BUS COUPLER AND 2NOS EACH O/G FEEDERS **SUPPLY AND INSTALLATION COMMISSIONING OF HT CABLE **INSTALLATION OF 4000AMP BUS DUCTS. **SUPPLY INSTALLATION & COMMISSIONING OF HT TERMINATION . **INSTALLATION & COMMISSIONING OF LT PANELS. **SUPPLY & INSTALLATION COMMISSIONING OF EARTHING SYSTEMS **SUPPLY & INSTALLATION COMMISSIONING CABLE TRAYS. **SUPPLY AND COMISSIONING OF LIGHTING FIXTURES, DB’S AND WIRINGS.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


4.Company Organization Chart- Sr. No.

Name Age Qualification Experience Nature of works handled

Year

1 Harish Kumar 31 Electrical Engineers 13

Project-Internal/External

Electrification,LT/HT Jobs 2006

2 Arun Kr pandey 38 Electrical Engineer 21



3 Yogesh Kumar 25 B.Tech in

Electx 3



4 Iswar Singh 30 ITI in Elect 7



5 Rangnath Mishra 28 ITI in Elect 5



6 Sanjay 28 ITI in Elect 8



7 Jitender 30 Dip in Elect

Engg 5



8 Manoj Yadav 31 Dip in Elect

Engg 10



9 Anil 25 B.Tech in

Instrumentation 2 Project Engineers 2010

10 Rishab Jain 24 B.Tech in Electrical 1 Project Engineer 2011

11 Kamal 22 12th Pass 1 Draftsman 2011

12 Rajender 28 B.COM 3 Accountant 2010

13 MukeshChaturvedi 31 BA 10 Marketing executive 2011



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


5.SITE SAFETY AND SECURITY PLAN-

1). After securing the contract with any client, we check out a safety plan, suitable for the construction site depending upon the nature of Industry / Establishment and our work scope involved. 2). In the event of occurrence of any unfortunate incident resulting in a minor / major injury to any of the workman, even after taking all the relevant precautions, we ensure that the required medical aid is given to the concerned worker in the quickest and shortest possible duration and thereafter his physical condition is observed very closely by our higher management and all corrective measures are taken at the earliest. 3). It is imperative for all of our site engineers to observe all the Safety and Security regulations in their respective working areas and nobody is allowed to dilute these norms in any way. 4). Safety awareness in all of our employees, workmen is one of our foremost and important objective. We conduct Safety training sessions quite regularly for the benefit our workers. These training sessions are documented also in Soft and hard copies duly indicating the names of the participating employees, topics covered, dates of imparting the training, instructor's name and venue of the training etc. In general, it is recognized by us that the Site safety is a team effort and every

individual's participation and awareness to these requirements is a MUST to ensure the Safety and well-being of all the workers, Supervisors and engineers etc. Our commitment will help ensure that all of our Project sites are 100% accident (major or minor) free and no site operations cause of any kind of loss or damage to the properties or human lives which are so much precious.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


6.Safety Rules-

SAFETY RULES FOR ALL THE EMPLOYEES, IRRESPECTIVE OF ANY LEVEL AND CADRES.

1). It is mandatory for all the employees to participate actively in all the safety programmes, training sessions etc, which are being organized by the company quite regularly. 2). Every employee should insist on the observance of all the safety rules by fellow employees / workers, besides of himself, observing these rules very strictly. 3). On all routine days, before starting any job, ensure that they have secured the necessary permit verbally and in writing also, for working in the specified area. The time duration, location of the site and date etc. should be clearly indicated in the Work Permit. This work Permit is normally issued by the concerned Safety engineer of the Client. This regulation is observed more strictly in Chemical Plants, Refineries, functional distilleries and Pharmaceutical Plants etc. In residential, Commercial, Industrial complexes etc., normally, this regulation is observed only verbally, since the Client's installations are not likely to get damaged because of any on going construction activities. 4). Report immediately to the concerned safety engineer of our company / Client also, if you come across any hazardous and dangerous situation in any of the location at the site. 5). White closing the work in the evening/ night, clean up all the adjoining areas and remove all the waste items, which are generated during the course of working. 6). Whenever standing or working near the construction machineries, such as Cranes, Excavators etc. ensure that you are not very close to these machineries and are away from the suspended loads etc. 7). Never use defective tools / tackles or any construction implements / equipments. This may prove dangerous. Handling of the defective tools may cause injuries. 8). Fire extinguishers, hand gloves, safety goggles, aprons etc. should be readily available at the site and they should be kept and stored at the nearest location from the working area.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


7.Safety & Security-

S - Safety is foremost and very important. No compromise can be considered on this account. A - Awareness of potential hazards in the entire work force of the company at all the levels. F - Forethought for prevention of all kinds of accidents, which may prove very costly in terms of human life and the property. E - Ever vigilant and Cautious. T - Think before carrying out any work at elevated levels, or at any hazardous location. Take all the precautions and all the necessary steps to avoid any untoward incident.

Y - ‘Yes' should be our forceful and emphatitic answer to the question whether, we have taken all the steps, measures to avoid any kind of minor / major accident.

Our company is fully committed to its policy of prevention / reduction and altogether complete elimination of all kinds of accidents at the sites, which otherwise may result in financial or human life loss either directly to us or our Clients / Consultants. Minor or Major accidents, normally bring all site construction work to complete halt and our Customers / Clients may loose precious workers man-days along with loss / damage to the property / installations. This, in turn, may buildup further pressure in our as well as our Client's working system and efforts to complete the project on time.

We have chalked out a Safety Plan duly approved by our management team and all the Sites are asked to adhere to this programme fully in letter and sprit. All the sites engineers are asked to plan out all their site activities accordingly. The specific objectives of this plan are as below:-

1). No Compromise or dilution of any steps to prevent any kind of minor / major accident.

2). Even if takes place remotely, follow up actions are taken in the quickest possible time. Immediate steps are taken to mitigate the effects of the accidents and reporting is done immediately to all the concerned. Medical aid is made available in the shortest possible duration and if hospitalization is required, the same is being attended with no loss of time.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


3). Establishment and maintenance of a Safe, healthy and productive atmosphere for all the staff and workers at the sites.

4). Regular and random checking of the Site operations by Senior Managers from the view of all the relevant aspects, which may affect Security and Safety measures and take immediate actions to rectify the situation.

Following Safety tools / implements are mandatory for all the workers / foremen to wear at the sites: -

SAFETY GOGGLES: For all workers engaged in Drilling, Chipping, Welding, Gas brazing etc. FACE SHIELDS:

While undertaking some works in certain peculiar situations, workers may get exposed to some hazards and risk etc. In such cases, Face Shields, made out of heat resistant plastics are used by the workers in our company.

HEAD PROTECTION:

This is achieved by providing Safety helmets to all the workers and making it compulsory for them to wear at the site.

HAND PROTECTION: Cotton or Canvas gloves are used by the workers, while handling the materials / equipments etc. PVC or Rubber Hand gloves are used for handling any chemical liquid like electrolyte of the batteries, handling the batteries of UPS Units, Battery banks etc. BODY PROTECTION: This is achieved by wearing PVC / Cotton or leather aprons as per the required situation.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


SAFETY BELTS: These are normally used while working at elevated levels, when the slightest carelessness on the part of the worker can result in a serious and fatal accident. No worker is allowed to work at any elevated and hazardous location without tying the Safety Belt. LADDERS AND THE SCAFFOLDING: These are maintained properly at all the time and at all the sites. Ladders should be of adequate strength to take the load of the workers. All the foot step brackets should be sturdy and securely attached to avoid any malfunction, which otherwise, may result in the fall of a worker. Before the usage of Scaffolding or Ladders, they are properly tested for their mechanical strength by our workers. TEST LAMPS / TESTERS: Test Lamps / Testers are used to ensure that the installations are fully dead electrically and earthed and it is safe to work on these installations. These are required while availing shutdown / outages on the equipments, which are normally always LIVE and remain in service on routine days. VEHICLE AT THE SITE: If the works are going on at elevated levels, we invariably ensure that a transport Vehicle is always available at the site in case of any contingency. If the location at some elevated level / height, is very tricky and hazardous, we provide Safety nets also to prevent any untoward incident. FIRE EXTINGUISHERS:

Fire Extinguishers of adequate type and the capacities are employed and are kept closeby at the work locations, taking into consideration the type of fire risk involved. Extinguishers are periodically tested and charged / refilled back whenever they get emptied after the use.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


CAUSE OF ACCIDENT: Many accidents take place because of either overconfidence or carelessness on the part of the workers. On many occasions, the workers tend to deviate from the established and set rules of the Safety and whenever it happens, an accident may happen. Our workers are regularly being warned by our management team on the above matter and close supervision is exercised by our engineers on all the workers to avoid any untoward incident. ALL EMPLOYEES SHOULD ENSURE THAT THEY: - Follow rigorously all Safety regulations and established rules, while carrying out all site works.

i. Use correct tools / tackles and also ensure that these tools / tackles are properly maintained.

ii. Use all personal protective equipments, wherever provided and also to ensure that they are appropriate for the risks involved.

iii. Carry out only properly earmarked and authorized work. iv. Use common sense and presence of mind while working at all the locations of

the site. v. Ensure that the First Aid Box is containing all the required medical items and

these items are being replenished properly as and when, these are exhausted.

Normally at large sites, one engineer (both from Client and the Contractor side) is made fully responsible for looking into all the related safety aspects and they conduct a weekly / fortnightlymeeting with all the concerned officials, in which their seniors also participate. These safety engineers are authorized to stop the work as and when they come across any unsafe method of carrying out the work. To make the workers / Supervisors more vigilant on safety aspects, sign - ages / signboards / hoardings etc, are put up at all the important locations of the site, displaying the WARNINGS on respective hazards, to which these workers are likely to be exposed.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


8. Environmental policy

We, M/s. SANKHLA ENGINEERS. are committed to preventing any damage to the environment. All environmental issues are addressed regularly in our company and due compliance is observed in all our activities and interaction with the Client. We communicate with all our site engineers and supervisors very effectively on these environmental issues and convey to them the due importance of these matters. These site engineers, in turn communicate these issues to all the workers, who follow the instructions very religiously. Our standards for running of the sites are as below:-

We ensure that there is no wastage of electricity, water or other resources while carrying out the installation works.

We carry out regular servicing / maintenance of all construction tools / tackles, so that no harm is implicated to any of the workers, while using them.

We organize special training sessions for most of our skilled workers to sharpen their skills as and when required and with this, they learn all modified and updated methods of working.

Whatever waste items are generated during the course of working at the site, they are either, recycled or removed and disposed off safely without causing any harm or damage to the surrounding.

M/s. SANKHLA ENGINEERS. is committed to ensure that the environmental standards are achieved fully and all management controls are in place by taking the following measures-

Inspecting the work Sites at regular intervals. Ensuring that all employees are involved in the process. The Company’s

management is fully responsible for all environmental issues and all the employees have to follow the policy fully in letter and spirit.

This policy is continuously monitored to ensure that all the objectives are achieved. These issues are reviewed and amended periodically.

All the employees are fully made aware of environmental concerns covering a wide variety of issues concerning air, water, soil, noise pollution etc. which in turn may affect human health and their daily activities.



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


9.Our Bankers

*State Bank of India , Neemrana Branch,Neemrana,Raj

(301705)

& * ICICI BANK LTD

Behrod,Raj



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


LIST OF EQUIPMENTS Testing Equipments

Insulation Tester (Megger) -500 V

Insulation Tester (Megger) -2500 V

Phase Sequence Meter

Earth Testers

MultiMate’s

Tongue Testers

Continuity Tester

Socket Tester ,etc

Machinery

Hand Drilling Machine -20 mm

Chipper Machine -25 mm

Drilling Machine with Stand

Welding Machines

Hydraulic & Manually Crimping Tools -1000 sqmm

Grinding Machine

Gas Cutter

Brazing Tools

Hand Tools

Bench Grinder

Pipe Cutter,etc

DG Set 10KVA Single phase

Big Jack for Cable drum

HIPOT Testing Equipments.

Aluminium Ladder



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


11. REFERENCE LIST OF PROJECTS

Dura Line India (P) Ltd ,Neemrana,Raj Otsuka Chemicals Ltd,,Keswana,Raj Havells India Ltd,EPIP,Neemrana,Raj Medallion InfoTech (P) Ltd,Bawal ,HR Alchem International ,Neemrana,Raj Goindi Engineering works (P) Ltd,Bawal, HR Harvel Agua India Pvt Ltd,Bawal ,HR Saka India Pvt Ltd,Bawal ,HR AMD Industries Ltd,Neemrana,Raj KehinFie (P)Ltd,Bawal,HR Lapro harbals (P)Ltd,Panipat,HR Takhata Precission India Pvt Ltd,Neemrana,Raj Dainichi Colour india Pvt Ltd,Neemrana,Raj Asahi india Glass Ltd,Bawal,Hr and more…..



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


Service Tax registration Copy-



P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------




P.No-01494-246525,M-09214312270,9950542655

[email protected],

[email protected]


----------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------


Documents

SANKHLA ENGINEERS & CONTRACTORS2.imimg.com/data2/RR/PV/MY-/sankhla-engineers-comp… · · 2014-06-01SANKHLA ENGINEERS & CONTRACTORS ( Electrical Enginers & Contrctors) G-127,Riico