Sanitergent™ Cleaner/Sanitizer

Specialized sanitizer and cleaner for: Milkshake and soft serve machines, tanks, vats, and food processing equipment, dishes, glasses, and utensils, tabletops, floors, and walls

• Sanitergent™ cleans and sanitizes in one procedure. • Sanitergent™ saves labor and reduces the need for multiple cleaning

products. • Sanitergent™ will clean and sanitize equipment in accordance with

local, state, and federal standards. • Sanitergent™ does not leave a toxic residue. • Sanitergent™ is FDA approved and EPA-registered as a no-rinse

sanitizer. •Machinery properly cleaned with Sanitergent™ will consistently deliver

a high-quality product.

Chemical CharacteristicsAbrasive .....................................................noAppearance ...............white, granular powderBiodegradable ......................................... yesCorrosive ..................................................noFragrance ..................................chlorine odorNon-Acid .................................................. yesNon-Butyl ................................................. yesNon-Flammable ....................................... yesNon-Toxic ...................................................nopH (concentrate) ........................................n/a (1% dilution) ............................... 10.2-10.9Phosphate-Free ........................................noSara 313 notification required ..................noVOC Compliant ........................................ yes

Sanitergent™Cleaner/SanitizerST-762, 50 x 1 wt. oz. case

762tek 05/13STEARNS PACKAGING CORPORATION 4200 SYCAMORE AVENUE (53714) • P.O. Box 3216, MADISON, WISCONSIN 53704-0216

Telephone: (800) 655-5008 • (608) 246-5150 • Fax: (608) 246-5149E-mail: stearns@stearnspkg.com • http://www.stearnspkg.com

Sanitergent™Cleaner/Sanitizer can be used in dairies, hospitals, breweries, restaurants, and food processing plants. It is particularly effective on surfaces which contact food. It is recommended for use on hard (nonporous) surfaces or on dishes, glasses, food processing equipment, or utensils including dairy and brewery equipment or utensils that need a strong sanitizer treatment. This material is very effective on table tops, tanks, vats, floors, walls, dishes, glasses, metallic utensils, and milkshake and soft serve machines.

Directions For UseClean object to be sanitized with 1 to 2 ounces Sanitergent™

Cleaner/Sanitizer per 2-1/2 gallons of water and rinse well with potable water. It may be necessary to remove gross filth and heavy soil from surface by a pre-scrape, pre-flush and where necessary, a pre-soak treatment. Dissolve 1 oz. of Sanitergent™ Cleaner/Sanitizer per 2-1/2 gallons of water to give a solution containing 100 ppm available chlorine. Apply the sanitizing solution to the surface to be sanitized by immersion or flooding, to wet all surfaces thoroughly. Let stand at least one minute. Drain and air dry. The same solution may be used in the feed tanks of immersion type machines providing at least one minute contact time to sanitize dishes, glasses, food processing equipment and utensils.

The sanitizing solution should be used promptly after mixing. It should be prepared daily or more often if it becomes dilute or soiled. If the solution is allowed to stand and/or continued use shows the level of chlorine has not been maintained, add more Sanitergent™Cleaner/Sanitizer to maintain a use solution of 100 ppm available chlorine.

For mechanical operations, the prepared and spent use solutions may not be reused for sanitizing but may be used for other purposes such as cleaning.

IngredientsACTIVE INGREDIENTSodium dichloro-s-triazinetrione dihydrate ....6%INERT INGREDIENTS ................................... 94%TOTAL ...........................................................100%Provides 3.3% available chlorineEPA Reg. No. 10634-27-3640 EPA Est. No. 10634-MA-01

SANITIZER

ST-No. UPC No.Mfg. No. 071206 Case Size Case Weight Cases/Pallet

ST-762 007629 50 x 1 wt. oz. packs 4 pounds 240

Dilutions

MATERIAL SAFETY DATA SHEETSECTION 1 – PRODUCT/MANUFACTURER’S IDENTITY

Product Name: Sanitergent Formula ID Number: .GOOD-ST-0762MSDS File Name: SANITERGENT

Synonyms: ST-762EPA Reg #: 10634-27-3640

Concentrate In Dilution

DOT Hazard Class: None 0 Flammability 0

3 Health 1DOT Shipping Name: Cleaning Compounds, NOI,powder. Item 48581, Class 55 1 Reactivity 1

None Special Hazard None

HAZARD RATING

4 = Extreme3 = High2 = Moderate1 = Slight0 = InsignificantFDA Regulated: Yes

Company: Stearns Packaging Corporation4200 Sycamore Avenue (53714)PO Box 3216Madison, WI 53704-0216

Phone: 800-655-5008Fax: 608-246-5149Email: stearns@stearnspkg.comWebsite: www.stearnspkg.com Emergency Contact: CHEM-TEL, 800-255-3924 Abbreviation Key:

N.A.=Not Applicable, N.D.=Not Determined

SECTION 2 – HAZARDOUS INGREDIENTS / IDENTITY INFORMATIONCHEMICAL IDENTIFICATION CAS NO. HAZARD PEL(ppm) TLV(ppm) %(Optional)Sodium metasilicateSodium dichloro-s-triazinetrione dihydrate

6834-92-051580-86-0

Corrosive/OxidizerCorrosive

Not establishedNot established

Not establishedNot established

85.0

SARA Section 313 Title III Notification Required: NoSECTION 3 – PHYSICAL DATA

Solubility in water: Approx. 25% by weight Vapor Pressure (mm Hg): N.A. pH (Concentrate): N.D.Boiling Point: N.A. Vapor Density (Air=1): N.A. pH (1% Solution): 10.2 – 10.9

Appearance and Odor:White granules;bland odor Melting Point: N.A. Evaporation Rate (Water=0.3): N.A. Specific Gravity: N.A.

SECTION 4 – FIRE AND EXPLOSION HAZARD DATAFlash Point and Method: None

Flammable LimitsLEL: N.A.UEL: N.A.

Special Fire Fighting Procedures: If possible, isolate container in open air or well-ventilated area. Flood with large volume of water. Use self-containedbreathing apparatus where this material is involved in a fire.

Extinguishing Media: If involved in a fire, foam, carbon dioxide, dry chemicalor water.

Unusual Fire & Explosion Hazards: Strong oxidizing agent. Material will burn withthe evolution of chlorine and equally toxic gases. Contact with waterslowly liberates chlorine-containing gases. Decomposes at 460 to 480deg F with liberation of harmful gases.

SECTION 5 – REACTIVITY DATAChemical Stability: Stable: X Unstable: Incompatibility (Materials to Avoid): Contact with acids and ammoniated

detergents will release hazardous chlorine containing vapors. Mix only withwater.

Conditions to Avoid: Do not mix with anything but water. Do not add todispensing device containing remnants of any other product. Do notmix with solutions containing ammonia. Hazardous Polymerization: May Occur Will Not Occur X

Hazardous Decomposition or By-Products: High temperatures e.g. in a fire willrelease carbon dioxide, nitrogen, chlorine, cyanogen chloride.

SECTION 6 – HEALTH HAZARD DATA/FIRST AID PROCEDURESEmergency and First Aid Procedures:Health Hazards (Acute and Chronic): Corrosive; causes burns to eyes. Causes

irreversible eye damage. Harmful if swallowed. Ingestion: Call poison control center or doctor immediately for treatment advice.Have person sip a glass of water if able to swallow. Do not inducevomiting unless told to do so by the poison control center or doctor. Donot give anything by mouth to an unconscious person.

Signs and Symptoms of Exposure: Ingestion: Can cause chemical burns ofmouth, throat, stomach, and mucous membranes. Inhalation:Inhalation of dust causes toxic effects. Eyes: Corrosive to the eyes;may cause severe and permanent damage. Skin: Severely irritating toskin; can cause chemical burns, especially to broken skin.

Medical Conditions Aggravated by Exposure: No data availableCarcinogenicity: IARC Monographs? Yes No X _

Inhalation: If exposed to excessive levels of dust, remove to fresh air and getmedical attention. If person is not breathing, call 911 or an ambulance,then give artificial respiration, preferably by mouth-to-mouth, if possible.Call a poison control center or doctor for further treatment advice.

NOTE TO PHYSICIAN: Probable mucosal damage may contraindicatethe use of gastric lavage.

Eyes: Immediately flush eye with plenty of cool, running water. Removecontact lenses if applicable, and continue flushing for at least 15 minutes.Get medical attention immediately.

Skin: Take off contaminated clothing. Rinse skin immediately with plenty ofwater for 15-20 minutes. Call a poison control center or doctor fortreatment advice.

SECTION 7 – PREVENTATIVE AND CONTROL MEASURESVentilation: Good general ventilation requirements.Skin Protection: Use neoprene, PVC, or nitrile chemical resistant gloves.

Rubber boots are recommended when cleaning spills.

Steps to be Taken if Material is Spilled or Released: Sweep up and place in adisposal container. Mop up or flush residue to drain with water. Note: Thisproduct is toxic to fish. Do not discharge into lakes, streams, ponds, orpublic waters unless in accordance with NPDES permit.

Eye Protection: Recommended; goggles should be chemical splash type.Facilities using this product must be equipped with an eyewashstation.

Respiratory Protection: In general, respirators are not needed if the product isused in a well-ventilated area.

Waste Disposal: Small amounts of unused product may be flushed safely to thesanitary sewer with plenty of water. Contact local water board beforeflushing large amounts. Large amounts may be disposed of in a sanitarylandfill. Check with state and local authorities for restrictions and toensure of proper disposal of product.

Other Precautions: Keep out of the reach of children. Handling and Storage: Do not get in eyes or on clothing. Wear goggles andrubber gloves when handling. Wash thoroughly with soap and water afterhandling. Store in a cool dry place. Avoid hot, humid storage areas; thiscan cause delaminating of film or discoloration of packet. Store away fromfood, feed, combustible materials, and other chemicals.

SECTION 8 – OTHER REGULATORY INFORMATIONThis product does not contain any known or anticipated carcinogens according to the criteria of the NTP Annual Report on Carcinogens and

OSHA 29 CFR 1910, Z.Ecological information: Considered biodegradable

rev 7/25/13This MSDS data relates only to the material designated and does not relate to its use with any other material or process. The data is believed to be accurate. However, since use conditionsvary and are outside our control, Stearns Packaging Corporation makes no warranties, expressed or implied, and assumes no liability for failure to follow directions and safety precautions.