Things to Download Before You Start Entire Process:

+ Samsung NC10 DVD/ISO (Jas+NC10 PPF) : This is needed for fixing and installing drivers and updatesOr + Samsung NC10 10.5.5 DVD/ISO (Jas+NC10 PPF) : This is needed for fixing and installing drivers and updates

+ Official Combo 10.5.6: For upgrade DVD/ISO/DDMAC purposes

(All the links are in the BIKE TOWN website)

STAGE – 1A : PARTITIONING

• In this process, you will do some partitioning, and this may be harmful, if you don't follow the process correctly!!!

• Make sure you follow the slides as it is shown (partition sizes can be different depending on your needs, so discuss/ask questions in the topic regarding the sizes.

35000

Format has to be done again, because windows automatically adds system volume information which makes it unusable for ddmac!!! Make sure to format! else ddmacwill give error saying “drive is not empty“

STAGE – 1B : DUAL BOOT PROCESS/DDMAC PREPARATION

• Dual boot process means you can boot two OS-s (Operating System-s) from one bootloader.

• DDMAC is a handy program to insert (in a special way- think of it as emulater) DVD-ROM – ISO image to a HDD partition, and allows booting from this partition as if it is DVD-ROM. As you would guess by now why it is handy and what it does? No? Means you do not need USB DVDROM or Internal DVDROM to install your favourite OS-s . Instead you can clone the iso to a partition and boot from it, which is quite fast process for starting up installer and installation process!

Name your isowhatever you want and place it here

Place your ddmac folder here

1

2

3

1

2

3Whatever your iso name is

Your iso name can be anything you like to name it... In this example i named it nc10.iso when i copied to C:

1

3

Choose the ddmac named partition for cloning

2

This clone process will take about 3-5 mins, so while doing its job, DO NOT INTERRUPT THE PROCESS and DO NOT TOUCH ANYTHING! Until you see “ALL DONE, HAVE FUN” message

“ALL DONE, HAVE FUN” indicates that process finished successfully, and if you check your system, D:DDMAC partition should have disappeared!

STAGE – 1c : SETTING YOUR BIOS TO BOOT FROM USB DVD-ROM

• This process is for people who really want to do it the hard way!!! I highly suggest using DDMAC method.• In this process, you will enter into the bios, and change settings that are crucial for the installation to start!

IF you did DDMAC process, skip the USB DVD Stage!!!

• Partitioning, Dual Boot Process, Bios Settings are completed if you followed everything correctly.

• You can proceed to Next STAGE: INSTALLATION

• If you set the USB CD to boot as 1st in the list correctly, now you can connect your USB DVDROM, and place the Jas DVD in it and start your Samsung.• Connect your USB Keyboard and Mouse as well

• No need to press anything wait for countdown to finish (5 sec)

• Just Press “Enter”, and let it boot to the “Installer Screen

• If you are using DDMAC process instead of USB DVD in the boot, you will see• Windows XP Home• Mac Os X System• If you choose Mac OS X System, OSX bootscreen (OSX bootloader’s boot screen)• What you need to do NEXT is to choose Smasung NC10 and press ENTER

Now it will boot into installation process

• This slide and following slide gives you idea about what to do in disk utility.• Current slide is from older screen cap, so you should see and apply things to only disk0s3 and disk0s5•You may have different size and amount of partitions depending on your choice of course, my example is made on 1-main 2-time machine/data partition 3rd one is already used for ddmac purpose.•Hope you got the idea! And not stuck with numbers etc...

• Do the exact same process for disk0s5 And once you do it all, you will see the following screen

OSX1 is for Main installation

OSX2 is for TimeMachine or Data purposes

As I said in previous slides, you can have different size and amount of partitions for your own liking and reasons. Example given is only for basic needs with stock device.

• In the previous slide, you see all 3 drives are highlighted dark black colours, meaning they are MOUNTED. In case they are not highlighted (meaning not Mounted), you can right click on each of the drive (any of the OSX1, OSX2, OSX3, whichever is not mounted). And choose MOUNT option as seen in next slide.

• Once you are finished and mounted all three drives (osx1, osx2, osx3), close the current window, and it will return to installation screen.

• In next window is “Customize” for you to choose the options for your system.• From “Samsung NC10” options, select “Samsung NC10 Package” and “Cleanup” .•Once finished customizing, click on “INSTALL” button , and press “Skip” button on the DVD check .

IF YOU HAVE “SAMSUNG NC10 – 10.5.4 OR 10.5.5 OR 10.5.6 ISO/DVD” JUST SELECT THE OPTIONS MENTIONED BELOW IN THE CUSTOMIZE WINDOW

IF YOU HAVE ONLY JAS 10.5.4 ISO/DVD FOLLOW THE NEXT SLIDES!!! 73-74 ONLY FOR JAS 10.5.4 DVD/ISO

• In case people are not able to see the options.

• Now grab some Orange Juice? Beer? Vodka Soda? Whisky? Or watch some episode of Heroes... This process of installation will take approximately 27mins.

• Once the installation finished, it will ask you to Restart. Do it.

• Now it is time to use some USB Keyboard and Mouse, because your internal keyboard and track pad will not work.

• When you first restart your PC, It may start with blinking cursor, or boot error with some messages this is due to bootloaderprocess to accidently changing active partitions. To fix this, restart the machine and press F4 to go to rescue menu, and dontdo anything, just press ESC (escape button) and you will see following screen.• By default, now OSX will take over boot process, however if you like to keep XP bootloader follow 78-79-80 (now it should have dual boot option as well made by ddmac)

• Choose the windows NTFS, using arrow keys, and press “Enter”. It should boot Windows XP

•Right click on the ( C: ) drive and choose “Mark Partition as Active” and accept the pop up message

• Once you reboot again, this time it will show XP bootloadeoptions as• Windows XP Home• Mac Os X System• If you choose Mac OS X System, you will see the same previous bootscreen (OSX bootloader’s boot screen)• What you need to do NEXT is to choose OSX1 and press ENTER

• Choose OSX1 and press enter

• Now it is time to get inside OSX!!!• You shall now see the welcome screen, (note that there should be normally sound however because of the default output set to HP, which doesn’t work at the moment, you will not hear anything until you set the output to internal speaker from sound menu in System Preferences!• Continue with the registration and other settings process...

• If you have chosen USA as your country, this is the registration screen you will see.

If you have chosen any country apart from USA this is the registration screen you will see.

• In the next slide it will ask you to choose picture for your account either through camera ☺ or you can choose from built in pictures similar to XP account logos.

• Now if you followed all the instructions carefully, you should be at the Desktop...

• OK, one last task! Setting screen brightness control using quicksilver!

• Open Finder/Applications/Quicksilver., and follow the guide

Choose1- Keep in Dock2- Open at Login

Add Hotkey(2 Hotkeys:for Brightness Increase / Decrease

Add Hotkey(2 Hotkeys:for Brightness Increase / Decrease

In the next slides you will be doing lots of tasks. So better to read now and understand what you are going to be doing within next slides, and do not get confused with things you seeWhat will you do in ORDER:

1- Hotkey Creation2- Hotkey Assigning (short cut keys for controlling brightness like windows key + up arrow key will increase brightness and windows key + down arrow key will decrease brightness3- Assigning Actions for those shortcuts (after you assign shortcut keys above, you need to assign the actions such as increase/decrease brightness function with scripts.4- Once you set up actions, next task is to start using it.5- First time you use one of the functions (windows+up arrow key to increase brightness) it will ask you to enter your password so that your password can be added to Keychain for secure storage!6- Once password is set up, system will ask whether to allow adding quicksilver to access keychain (which you will ALWAYS ALLOW ☺)7- System will ask you to allow once again (you will ALLOW once more) and from that point on, everything is automated! You can control brightness manually from now on!

1

23

4

1- Double click on the designated area2- Side menu opens up3- (Increase) Click edit button, and press Windows Key ( )+ Up Arrow Key ( )4- Show Window option selected5- Same process for the second line (Decrease) button with Windows Key+DownArrow key

5

1- Double click on the designated area (under the command title) and following screen will pop up, you need to set up this for each action (1st for increase, 2nd for decrease brightness control

1- In the next slide you will see finder to locate the brightness control scripts, which are located in /Library/Scripts/Brightness/ Once in the folder, you will drag and drop each one of the scripts to type to search area (increase for the top one, decrease for the bottom one

OSX1 > Library > Scripts > Brightness

1

23

- Same process will be done for the decrease function in the second line command (See the next slide)

Drag and Drop

4

1

23 Drag and Drop

4

Now the FIRST TIME usage of the controls!

1) Press : Windows Key + Up Arrow Key2) When it asks, enter your password (don’t worry about seeing clean text of your password, it will be encrypted after you type!!!)3) Quicksilver needs permission to access to Keychain (ALWAYS ALLOW)4) Keychain needs to permit quicksilver’s requests (ALLOW)

All set and you are good to go...

When I finished everything I had some ugly icons built into scripts, but Realrooster provided new brightness icons to use in the system, I will make a new package for these icons, and once installed it will show near original icons every time you use the brightness controls....