95 Midland Rd Telephone (989) 799-6871Saginaw, MI 48638 FAX (989) 799-4524

CE Declaration of Conformity

This is to declare and certify that the products specified below, in the configuration marketed by us, are in due compliance with the requirements of the relevant EU Directives. The validity of this declaration will cease in case of any modification to the product without our prior consent.

Description: Filter fansModel Series: SCE-N12FA**, SCE-FA**, SCE-N3RFA**, SCE-N3RFA**, Serial No: See type plate

Directive / Regulation / Standard NumberMachinery directive 2006/42/ECEMC directive (Does not apply for versions up to 75V DC) 2014/30/EULow voltage directive (Does not apply for versions up to 75V DC) 2014/35/EUSafety of machinery - Electrical equipment of machines - Part 1: General requirements EN 60204-1:2006/A1:2009Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2012+A11:2014Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers EN 60335-2-40:2003+A13:2012

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans EN 60335-2-80Degrees of protection provided by enclosures (IP Code) EN 60529:1991/A2:2013Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current <= 16 A per phase) (Does not apply for versions up to 75V DC) EN 61000-3-2:2014

Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection (Does not apply for versions up to 75V DC)

EN 61000-3-3:2013

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments (Does not apply for versions up to 75V DC)

EN 61000-6-1:2007

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments (Does not apply for versions up to 75V DC) EN 6100-6-2:2005/AC:2005

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (Does not apply for versions up to 75V DC)

EN 6100-6-3:2001+A11:2004

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments (Does not apply for versions up to 75V DC) EN 6100-6-4:2007/A1:2011

Safety of machinery - General principles for design - Risk assessment and risk reduction EN ISO 12100:2010

Saginaw Control & Engineering

Ron Zeitler Quality Assurance Manager Date 1/28/2021