SAGAMA Pneumatico 500

Commercial offer

Sagama Pneumatico 500 Waste tire recycling production line.Recycling 500 kg of tires per hour.

Business "from scratch"!• Ready-made investment solution!• Quick startup!• Great service support!• Patented technical decisions for the quick pay-back.• The growing world demand for rubber crumb and coating is a

great time to start!• Russian currency inflation makes prices more attractive now!

Catch your chance!• USSR tires type is the hardest to recycle, that's why in case it

works with our tires it will certainly work with any other!!!

en.sagamagroup.com

Sagama LTD31, Primorsky ave., Tolyatti, Russia

Web-site: http://en.sagamagroup.com/http://sagama.trustpass.alibaba.com/

E-mail: [email protected]: vitali.bogdanovPhone: +37257675685

http://www.en.sagamagroup.com/

http://en.sagamagroup.com/

http://sagama.trustpass.alibaba.com/

en.sagamagroup.com

Sagama Pneumatico 500 is a tire-recycling factory. It includes a broad range of customized shredders and granulators, which have higher efficiency, toughness and consistency.

This production line was created to recycle waste tires (Diameter is up to 1.2 m). Productivity is 500 kg tires per hour (3000 tons a year).

Introduction Sagama Pneumatico 500 production line(500 kg of tires per hour)

SAGAMA Pneumatico 500Tire recycling line


Technical characteristics

Installed power 150 kW/hr

Average power consumption 100 kW/h

Input 500kg/hr

Output (depends on raw material) up to 350 kg/h

Max outer diameter of waste tires up to 1280mm

Recommendations to working conditions two 10-12 hours shifts

(considering technical rules)

Number of workers per shift 4 people

Tire recycling volumes per year (300 working days,

20 working hours)

up to 3000 tons

Requirements for premises

* Attention! To help you with process of service online monitoring it is necessary to have:

• At least 2Mbps high-speed Internet connection with static IP address• Great lighting , at least 200 lux

The end products of tire recycling can be roughly divided into 3 product groups:

1. Rubber crumb.Rubber crumb is used, for example, for the production of artificial turf, safety mats for playgrounds, anti-slip mats etc.2. Steel.The steel that is attained from the various size reduction steps can be reused as raw material in the

steel industry. The purity of the steel depends on the size and the design of the separation

technology.

3. Textile Fibers.

The textile fibers attained from the different size reduction steps are a valuable secondary fuel.

en.sagamagroup.com

5 m

10 m30 m

S=300m2



Equipment specification

NO.Device

Name

Specifics. Size, weight

(kg)

Power

consumption,

kW

Quantity Photo

1Control

console

Control console is intended to

control the line

1250х400х1800,100

- 1

2Steel wire

debeader

It removes bead wire from

landing ring. Output: bead

wire without permissions and

rubber component of tire.

Productivity: 15-40 tires per

hour. It is about 750 – 1000

kg/h.

4430х960х1500, 1200

11 1

3Hydraulic tire

cutter

It is intended to cut tires into

2 pieces (tire dimension is up

to 1.2m.) If tire bigger than

1.2m – need be cut into 3-4

pieces).

1850х2100х810, 1200

7,5 1

4 Сutter

Up to 700 kg / hour

The rotational speed of 7.1

rev / min

Power 1.5 kW

Blades – hardened tool steel

7,5 1

5Belt conveyer

№ 1

It is designed to transfer

massive chips (weight is about

2,5 kg and thickness is

maximum 40 mm) to the first

phase Crusher.

3400х1000х2350, 350

1,5 1

6Shredder №1

(first step of

crushing)

Shredder №1 (first step of

shredding). It is intended to

shred 100x100 chips to 30x30

chips.

Productivity: 700 kg/h.

Knives - hardened tool steel.

Rate speed:62rpm.

2000х910х1860,2000

37 1

en.sagamagroup.com



NO.Device

Name


(kg)

Power

consumption,

kW

Quantity Photo

7Belt conveyer

№ 2

Transferring 30x30 chips to

Shredder №2 (average level

of crushing).

Rotation velocity: 30 rpm.

Productivity: 1500kg/h.

3400х1000х2350,350

0,75 1

8Shredder №2

(average step

of crushing)

Shredding 30x30 chips to

12x12 chips.


Knives - Hardox steel.


2000х910х1795,1700

30 1

9Belt conveyer

№ 3

Transferring 30x30 chips to

magnetic filter.



3400х1000х2350,350

0,75 1

10Magnetic

filter

It is intended to separate

metal cord from 12x12 rubber

chips.


Productivity: 1500kg/h.

1200х600х1800,150

30 1

11 Chopper

It is intended to crush 12x12

rubber chips to rubber crumbs

up to 5-8mm.

Blades – Hardened tool steel

Rotation velocity of rotor: 600

rpm. Productivity: 350kg/h х

2 Belt gearing Netting size is

5 mm. 1850х870х1575,1500

18,5 1

en.sagamagroup.com



NO.Device

Name


(kg)

Power

consumption,

kW

Quantity Photo

12Rotary

chopper

It is intended to crush 12x12

rubber chips to rubber crumbs

up to 5mm.

1850х870х1575, 1500

37 1

13 Vibrating silo

Designed for mechanical

separation into fractions of bulk

materials,

by sieving them through a grid

with a given hole size, using

an oscillatory motion in a vertical

and horizontal planes generated

motor-vibrators.

Productivity - 500 kg / h;

The resulting fraction (base case)

1) more than 8 mm; 2) 5.8 mm; 3)

less

2,2 2

14Dust

collecting

system № 1

It is intended to remove textile

cord which is accumulate in

Crushers and Vibrating screens

№1 and №2.

Productivity: 1530-3300 m3/h.

Dust is collected into sleeve filter.

1300х1300х4500,500

4 1

15

Magnetic

filter of

vibrating

screen

Is for the metal cord

separation from 5 mm rubber

crumbs.

1400х600х2250, 230

0,75 1

16Vibrating

screen № 1

It is intended to clean 5 mm

rubber crumbs from textile.

2300х1100х1100, 350

0,52 1

en.sagamagroup.com



NO.Device

Name


(kg)

Power

consumption,

kW

Quantity Photo

17Vibrating

screen № 2

It is intended to clean 0,1-4,5

mm rubber crumbs from

textile. Then rubber crumbs

are divided in to two types of

fractions: 0,1-2 mm и 2-4,5

mm.

2300х1100х750, 350

0,52 1

18Exhaust

ventilation

system № 2

It is intended to clear air from

dust and for the heat

rejection. 1300х1300х4500,

500

5,5 1

19Conveyer

screw

It is intended for 5 mm rubber

crumbs transportation to the

magnetic filter.

3300х350х350, 200

1,5 3

20Aspiration

system

It is intended to transfer

rubber crumbs from magnetic

filter to Crushers №1, №2. It

also separates textile cord

from rubber crumbs.

2,86 м3б, 360

4 1

en.sagamagroup.com



Main product – Rubber crumb

The recycling line can be reconfigured quickly for the different size granules producing (from 1 to 5 mm).

So you will be able to produce the most popular product on the market!

0 – 0,65 mm 0,65 – 2 mm

en.sagamagroup.com

SAGAMA Pneumatico 500

2 – 5 mm


Where to use

en.sagamagroup.com



Ourservices

PRE – service

- Help with a project designing! Business planning.

MID – service

- We sent our engineers to set up the line and make trainings!

- By joining to the SAGAMA partner network, you get access to this market information and consultation!

AFTER SALE – service

- Remote monitoring complex through IP video surveillance!

- 1 year after-sale warranty!

- Marketing support: catalogues, booklets, boards layouts, website support!

- Online technical monitoring for the each equipment node using engines loads control system! It allows you to build the most effective line operation and prevents malfunction!

en.sagamagroup.com



en.sagamagroup.com

Ouradvantages

- Ready-made investment solution!

- 10 years producing experience!

- Great service support!

- Patented technical decisions for the quick pay-back.

- The growing world demand for rubber crumb and coating is a great time to start!

- Russian currency inflation makes prices more attractive now! Catch your chance!

- The production line quick reconfiguration for the differentstructure granules (fraction from 1 to 5 mm). So you will be able toproduce the most popular product on the market!

- The unique precision cleaning system and multistage crumbseparation from textile fibers and metal cord ensures the crumbpurity (without metal and textile inclusions)!

- USSR tires type is the hardest to recycle, that's why in case itworks with our tires it will certainly work with any other!!!

- Quick startup!



Certification

en.sagamagroup.com



Packing and shipment

en.sagamagroup.com

Our company



Success projects

en.sagamagroup.com

Video

Also you can view how it works via links:

Recycling process:https://www.youtube.com/watch?v=nF_mfZkyuF4

Company presentation:https://www.youtube.com/watch?v=Qw3gH0YE5qA



https://www.youtube.com/watch?v=nF_mfZkyuF4

https://www.youtube.com/watch?v=Qw3gH0YE5qA

We invite you to visit our company in Russia!

en.sagamagroup.com

You will be able to see our production, our clients companies and their SAGAMA systems in process!

So you will see by your own eyes how another companies use our product!

Vitaliy Bogdanov

E-mail: [email protected]: vitali.bogdanovPhone: +37257675685

Contacts



mailto:[email protected]

Documents

SAGAMA Pneumatico 500