safety systems - Reflex Safety · Type 3 Genius Bus Belt safety systems Conceived by us some 14 years ago, the Genius Belt gives full inertia reel comfort together with adjustment

safety systems

Total Safety Guaranteed!

Welcome to a brand new catalogue from Reflex Safety Systems, the UK’s

leading manufacturer and distributor of passenger safety equipment.

Established nearly 40 years ago, Reflex offers all the equipment you need

to ensure the total safety of your passengers from seat belts and wheelchair

restraints to a wide range of safety related products such as child seats, fire

extinguishers, first aid kits, safety hammers and high visibility clothing.

Each and every product has been carefully designed with the needs of

vehicle operators, occupational therapists, people with special needs and

their carers. But the products contained in this catalogue are only half the

story. We also develop one-off products and solutions to meet individual

needs. So, if you can’t find exactly what you are looking for, just ask.

New, easy to use catalogue

Our new catalogue has been designed with easy of use in mind and it covers

many new areas of passenger safety. With this loose leaf format, as new

products become available we will keep you updated. Should you have any

comments or suggestions for improvements, please let us know.

safety systems

Fireflex

Hand Held FireExtinguishers

Child and Special Needs Safety

Wheel ChairRestraint Systems

Stair Lift Restraints

Seat Belts

Harnesses

Passive Restraints

Replacement Parts

First Aid Kits

Emergency Hammers

Seat Belt Cutters

Road Side Emergency Kits

High Visibility Jackets

safety systems

CONTENTS

SEAT BELTS & HARNESSES3 Point Automatic Belt 1.14 Point Automatic Belt 1.2Type 3 Genius Bus Belt 1.3Type 4 Genius Bus Belt 1.4Adult 3 & 4 Point Harness 1.5Genius Belt with Body Brace System 1.6Static Lap Straps 1.7Automatic Lap Retractors 1.8Miscellaneous Restraining Straps 1.9Tongue Types 1.10Anchor Plates 1.11Buckle Types 1.12

FIRE EXTINGUISHERSFireflex 4.1Hand Held 4.2

SPECIAL NEEDS & CHILD RESTRAINTSChoosing a Child Seat 3.1Special Needs Child Seats 1 3.2Special Needs Child Seats 2 3.3Childrens Restraints 3.4Hyperactive Restraints 3.5

FIRST AID AND EMERGENCYFirst Aid Kits 5.1Body Spill Kits 5.2Emergency Kits 5.3High Visibility Clothing 5.4Seat Belt Cutters and Window Hammers 5.5

WHEEL CHAIR RESTRAINT SYSTEMWheel Chair Restraints 2.1Wheel Chair Passenger Restraints 2.2

SECTION 1

SECTION 2

SECTION 4

SECTION 3

SECTION 5

A N C H O R P L AT E O P T I O N S B U C K L E T Y P E O P TI O N S

Inertia House, Lowther Road, Stanmore, Middlesex HA7 1EP Telephone: 020 8204 0200 Fax: 020 8204 1100 Email [email protected] www.reflexsafety.co.uk

3 Po i n t A u to m at i c B e lt

safety systems

For use in front and rear seats incars, vans, trucks and some typesof multi-passenger vehicles. Alsofor non-automotive applications.

Standard Reverse Wound Inverted Parcel Shelf

15º swivel

For further options please refer to page 1.11

Flat swivel Long15º fixed Blade


WebbingCable

8º18º

27º

90º

Retractors supplied in variousangles to suit your specification

SEAT BELTS & HARNESSES 1.1



4 Po i n t A u to m at i c B e lt with top loop

safety systems

For use in front and rear seats incars, vans, trucks and some typesof multi-passenger vehicles. Alsofor non-automotive applications.

8º18º

27º

90º



Standard Reverse Wound Inverted Parcel Shelf

15º swivel




WebbingCable



Ty p e 3 G e n i u s B u s B e lt

safety systems

Conceived by us some 14 years ago,the Genius Belt gives full inertia reelcomfort together with adjustment forshoulder height making it suitable forchildren through to adults. The Type 3Genius Bus Belt has the same featuresas the Type 4 belt, but has beendesigned to be fitted to seats withoutany upper anchor point. Available asstandard or tailor made.

Standard Reverse Wound

8º18º

27º

90º



15º swivel




WebbingCable



Ty p e 4 G e n i u s B u s B e lt

safety systems

The Type 4 Genius Belt is designed for seatswith a top anchor point. As with all our seatbelts it is available as standard design ortailor made.

Standard Reverse Wound

8º18º

27º

90º



15º swivel




WebbingCable

A N C H O R P L AT E O P T I O N S


A d u lt 3 & 4 Po i n t H a r n e s sStat i c a n d A u to m at i c

safety systems

3 and 4 point harnesses can be universally fittedand provide the highest degree of safety. With a variety of applications from full FIA approval formotor racing, to use in cars, off road vehicles andspecial harnesses for wheel chair passengers.

Harnesses can be manufactured to suit your particular application with a variety of lengths,anchor plates and buckles.

Further information on harnesses and wheel chair restraints see section 2.

3 point harness can have aninertia reel fitted to the tailstrap for increased mobility.

Alternative 4 point fixing

3 point harness with flat anchor plates


15º swivel


Flat swivel Long15º fixed Track Foot



G e n i u s B e lt w i t h B o dy B r ac e Syst e m

safety systems

Also available as a twin system to give a diagonal seat belt across both shoulders.

The Body Brace System provides superiorupper body support for the elderly andspecial needs passengers.

The Genius Body Brace System is available as a single or twin system. They can be used in the normal way aswith any inertia reel seat belt, but for elderly or specialneeds passengers who need extra upper body support, theBody Brace System comes into its own. When the seat beltis pulled all the way out a ratchet mechanism is activated.This means that once the passenger is wearing the seatbelt it is locked, no more webbing can be extracted fromthe reel until the seat belt has been fully retracted, thusgiving upper body support similar to that of a full harness.


15º swivel




WebbingCable



Stat i c L a p St r a p s

safety systems

Lap straps are probably the most versatile seat belt/restraint. They can be madeto suit your requirements with a virtually unlimited range of lengths for the lapbelt and a vast array of buckle types and anchor plates. They can be made to suitmost applications.

Standard static lap strap with flat anchor plates and fixed length webbing buckle.

Static lap strap with 90º anchor plates with adjustor built into webbing buckle allowing both

ends to be adjusted to suit your application.

These are just two of the lap belts available. Lap belts can be manufactured to suitmany applications, we also have available all steel buckles.


15º swivel




WebbingCable

A N C H O R P L AT E O P T I O N S B U C K L E T Y P E O P TI O N S R E TR AC TO R COV E R


A u to L a p R e t r ac to r s

safety systems

Auto Lap Retractors (ALR’s) have many applications. Suitable for cars, minibusesand coaches as well as forklift trucks, amusement park rides and stair lifts theyhave many industrial applications.

ALR’s are available in two basic formats as shown above. Type A with a webbing tail and

Type B with a rigid blade fitting. The webbing tail (x) is available from 120mm upwards

to suit your requirements. The standard belt length ( y ) for both Type A and B retractors

is 1 metre, though specials can be made longer if required.

As with all our belts ALR’s can be tailored to suit your requirements.

Ty p e A Ty p e B

x y x y

B u c k l e L e n g t hRe e l Ty p e L e n g t h ( x ) L e n g t h ( y ) B u c k l e Ty p e

For buckle optionsplease refer to page 1.12A F r o m

1 2 0 m m1 0 0 0 m m

We b b i n gB l a d eC a b l e

We b b i n gB l a d eC a b l e

For buckle optionsplease refer to page 1.12B 2 5 m m 1 0 0 0 m m


ALR Retractor Cover15º swivel




WebbingCable

M i s c e l l a n e o u s R e st r a i n i n g St r a p s

safety systems

Simple to use simple to fit they can be tailored to suit your specific requirements.

PASSIVE RESTRAINTmax. 2400mm

STRETCHER STRAPmax. 1860mm

M R S 0 2 1 Co n t i n u o u s St r a pFor use with stretchers, spinal boards, wheel chairs etc, with push button release, fully

adjustable. Can be supplied with lightweight plastic buckles.

M R S 0 2 2 St r e tc h e r St r a pDesigned to attach to stretcher poles, fully adjustable, both ends. Can be supplied with

lightweight plastic buckles.


B U C K L E T Y P E O P TI O N S


SS1960 SR50 SIS 1MCF Aircraft Type Buckle

PRES

S PRESSPRESS


To n g u e Ty p e s

safety systems

ES1 MCF - Adjustable

K12 - Lay Flat

K12 - Adjustable

SIS - 38mm Adjustable

SIS - 38mm Standard

SIS - 38mm DoubleMCF - Standard

K12Arrow Head



A n c h o r P l at e s

safety systems

Belt Guide

Long

15º Swivel Track Foot

90º Fixed15º FixedFlat Swivel

ShackleA80 HookPillar Loop



B u c k l e Ty p e s

safety systems

PRESSPRESS

Webbing Covers

180mm200mm250mm

Webbing - AdjustableWebbing

SIS 1 MCF

Aircraft Type Buckle

Cable

Buckle Head Buckle Blade


116mm136mm185mm136mmcranked

C h o o s i n g A Wh e e lc h a i r R e st r a i n t

WHEELCHAIR RESTRAINTS 2.1


4 Point Webbing Wheelchair RestraintsSimple but very effective way of restraining wheelchairs, bothmanual and powered. Consisting of four tie down straps in total,2 of fixed length for front fitting and 2 adjustable straps for the rearfitting, with easy to use over centre buckles to allow tensioning of the whole system ensuring the chair is securely tied down.Designs available for both removable track fitting or permanentbolt down fitting.

Available in Standard (up to 90kgs) or Heavy Duty (up to 130kgs)

Part No WCT002 or Heavy Duty WCT/HD 002A four point system with buckle and tongue fittings for the frontand karabiner fittings for the rear.

Part No WCT001A four point system with buckle and tongue fittings for both thefront and rear mounting points

Short Reach 4 Point Tie Down SystemPart No WCT003Designed to fit within the length of the wheelchair. Taking up lessroom than the conventional method when space is at a premium,with the possibility of getting more chairs into a vehicle or allowingfor better access for seated passengers than previously possible.This is an unconventional system that is easy to use.

Unoccupied Wheelchair Tie DownPart No WCT005Designed to restrain an un-occupied wheelchair either open or folded away. A simple pull to tighten / pressto release cam buckle operation combined with two track fittings, make it quick and easy to use.

We offer a design to fit service where an existing product will not suit individualrequirements for a passenger or their wheelchair.

Wh e e lc h a i r Pa s s e n g e r R e st r a i n t s

WHEELCHAIR RESTRAINTS 2.2.1


Combined 4 PointWheelchair andPassenger RestraintPart No WCTPR004This combined passenger and wheel-chair restraint system, means simplyfitting one set of fittings into thetracking, taking up less time andspace, than independent systems.

Dual Inertia ReelSeat BeltPart No WCPR001Designed for ease of use and comfortto the occupant the dual inertia reelprovides a lap and diagonal seat beltfor the wheelchair passenger

Wh e e lc h a i r Pa s s e n g e r R e st r a i n t s

WHEELCHAIR RESTRAINTS 2.2.2


Dual Inertia with Body-BraceSingle System Part No WCPR003Twin System Part No WCPR004This is ideal for operators who do not know who they may be carrying.It can work in the same way as the standard Dual Inertia or if requiredyou can extend the seat belt webbing past a set point, once this has been done the webbing can be set to fit the occupant, it will then lockallowing no forward body movement. This is available as a single or twinrestraint system.

The single system gives a lap and diagonal belt in the same way as theDual Inertia system. The twin offers a full harness, utilising two sets ofInertia Reel body-Brace units.

Full harnesses give superb upper body restraint withfull adjustment to both lap and shoulder straps.

4 Point Full Body HarnessPart No WCPR005This is a four point adult wheelchair passenger harnesswith 4 track fitting point.

Part No WCPRJ005A junior version of the WCPR005 adult harness.Manufactured using 38mm webbing, buckles and adjusters.Suitable for children from 4 to approx 13 years of age.

2 Point Full Body HarnessPart No WCPR006Basically the same adult harness as the 4 point but onlyutilises two track fittings.

Part No WCPRJ006A junior version of the WCPR006 adult harness.Manufactured using 38mm webbing, buckles and adjusters.Suitable for children from 4 to approx 13 years of age.

For passengers with poor upper body control we offer either a Dual Inertia Systemwith a Body-Brace Retractor or 2 and 4 point full body harnesses.

Up to 13kg (29lbs)A rearward-facing seat

which can be used in the

front or rear of the car.

Never use a rearward

facing infant carrier or

child seat on a passenger

seat fitted with an airbag.

C h o o s i n g A C h i l d S e at

safety systems

To assist you in selecting the correct child seat, our range is divided into several categories or groups by the weight range for which they are suitable. These groups correspond broadly to approximate age groups, but remember that it is the weight ofthe child which is the critical factor in choosing a suitable child car seat. We do notrecommend that you use a forward-facing seat until a child is above the minimumweight (9kg) and able to sit unaided.

CHILD RESTRAINTS 3.1


Group 0

Up to 10kg (22lbs)A rearward-facing seat



Never use a rearward

facing infant carrier or

child seat on a passenger

seat fitted with an airbag.

Group 0 + Group 1

9 - 18kg (20 - 40lbs)A forward-facing seat



Generally these have

a choice of upright and

reclined positions.

Group 2

15 - 25kg (33 - 55lbs)A forward-facing seat

or booster which can be

used in the front or rear

of the car. The booster

seat lifts the child and

positions adult lap and

diagonal seat-belt

correctly.

N.B. A booster seat lifts

the child, allowing the

use of adult lap and

diagonal seat-belts. Some

may have shoulder-belt

guides for added comfort.

Group 3

22 - 36kg (48 - 79lbs)A forward-facing seat or

booster which can be

used in the front or rear

of the car.

With over 34 years experience in child restraints for all modes of transport we will find the right solution for your seating requirements.

Please call our child seat hotline; 020 8204 0200 for further information and expert advice.

The groups listed correspond to the weight ranges in EuropeanStandard applying to child car seats.

WHEN GROUPS OVERLAP - Some overlap between Groups/weight-rangesdoes occur. As car seats are designed with versatility in mind, you

will notice that certain of our child seats are approved in two groups or more.

Just remember the child’s weight is the determining factor in selectingthe right seat.

S p e c i a l N e e d s C h i l d S e at s 1

safety systems



J u n i o r Trave l l e rG r o u p 1 a n d 2

An extremely versatile car seat offering comfortand security for the child from 9kg to 25kg withspecial needs. Easily installed using a lap anddiagonal seat belt. Removable foam pads androlls under the cover give support where required.

Trave l l e r P l u sG r o u p 2 a n d 3

An extremely adaptable car seat offering comfortand security for children from 15kg to 36kg withspecial needs. Easily installed using a lap anddiagonal seat belt. A wide range of optionalaccessories is available to suit each child.

Various accessories to aid support are available for these seats


S p e c i a l N e e d s C h i l d S e at s 2

safety systems



B e S a fe S e a tG r o u p 0 - 1

E u r o s e a t *

G r o u p 1 - 2

Re c a r o *

G r o u p 1 - 3

* Available as standard without harnesses.

Fully Adjustable

A rearward facing seat which is suitable forchildren up to 4 years of age (0 - 18kg) and forward facing 9 months to approximately 4 years of age (9 - 18kg).

Ideal for a young child with poor upper bodysupport.

A seat suitable for children from 8 months to 7years of age (9 - 25kg ) and for use on front orrear seats with adult 3 point seat belts.


This seat is fully adjustableand suitable for children aged approximately9 months to 12 years (9 - 36kg). It is variablein height, width and seat length,guaranteeing a correct posture.

H y p e r ac t i v e R e st r a i n t s

safety systems

This harness has been designed for hyperactive passengers, being one piece with nobuckle at the front. They have a release mechanism each side. Harness is availabledetachable or permanently fitted.

SPECIAL NEEDS 3.4

ACC E S S O R I E S


Available in two sizes: Age 4 - TeenageAdult

Shoulder Pads Shoulder Strap 201 Shoulder Strap 202 Crotch Strap

Please call our hotline; 020 8204 0200 for further information and expert advice.

A crotch strap is available

C h i l d r e n s R e st r a i n t s

safety systems

This harness has been designed for ease of use and is available as removable or a permanent fitting. A crotch strap is available as an optional extra with or withouta booster cushion. Ideal for children and adults that require superior upper body support and restraint.

PRESS

SPECIAL NEEDS 3.5

ACC E S S O R I E S


Shoulder Pads Shoulder Strap 201 Shoulder Strap 202 Booster Cushion Buckle Guard

Crotch Strap (optional)

Available in two sizes: SQQR ( Age 4 - Teenage )SQQRA ( Adult )

Please call our hotline; 020 8204 0200 for further information and expert advice.

H a n d H e l d F i r e E x t i n g u i s h e r s

All manufactured and tested to BSEN3 the current standard by which hand heldfire extinguishers must meet.

FIRE EXTINGUISHERS 4.2


2 Litre AFFFCode FEX001Replaces the commonly used 0.9 litre units that no longer meet withBritish and European standards. Use only on 12 and 24 volt systems,or non electrical applications.

Rating: 5A 55B

2kg ABC PowderCode FEX002Not recommended for PCV (passenger carrying vehicles), but can be usedon service/maintenance vehicles and many other applications includingelectrical systems.

Rating: 8A 55B C

1kg ABC PowderCode FEX003Not recommended for PCV (passenger carrying vehicles), but can be usedon service/maintenance vehicles and many other applications includingelectrical systems.

Rating: 5A 34B C

Fire Extinguisher Protective CaseCode FEX101Plastic weatherproof container suitable for fire extinguishers up to 2kgor 2 litre. Can be fitted into position or used as a carrying case.

C h o o s i n g a F i r st A i d K i t

All come in durable plastic case with hinged lid and carry handle. Contents suitablefor dealing with minor incidents. Every mini bus must have one, required by lawunder the Road Traffic Act 1986.

FIRST AID KITS 5.1


Economy PCV KitCode FAK001Complies with C&U regulations 1986.

Standard PCV KitCode FAK002Complies with C&U regulations 1986.Comes complete with mounting bracket.

Resuscitation KitCode RSC001In an emergency time is of the essence. This kit includes the necessaryequipment for the safe administration of CPR.

Premier Kit 1Code FAK0031 Para Medic Shears1 Survival Blanket1 Vent Aid7 Re-sealable Plastic Bags2 No. 16 Eye dressings2 Bandages w.o.w

(2.5cm x 5m)2 Triangular Bandages

1 Whistle3 Pairs Latex Gloves1 Roll of Plaster Strip10 Antiseptic Wipes24 Assorted Plasters1 CPR Advice Card1 Pair of Tweezers2 No. 8 Wound Dressing

1 Bandage w.o.w(7.5cm x 5m)

3 No. 1 Bp Ambulance Dressing

1 Penlight Torch12 Assorted Safety pins

Premier Kit 2Code FAK00430 Sterile Adhesive Plasters2 Sterile Triangular Bandages3 Large Sterile Dressings10 Moist Wipes1 Conforming Bandage

2 Sterile Eye Pads12 Safety Pins3 Pairs of Latex Gloves1 Vehicle Sticker1 Tuff Cut Scissors

2 Antiseptic Wipes1 Emergency Foil Blanket2 Pairs of Latex Gloves

1 Mask Resuscitator1 Plastic Apron1 First Aid Guidance Leaflet

Premier KitsDesigned to be functional and useable by someone with little or no firstaid training. Conforming with C&U regulations 1986 and containingadditional items as listed for each kit.

B o dy F lu i d D i s p o sa l K i t s

Available in 2, 6 and 12 application kits. Contains and deodorises fluid spills whilsteffectively cleaning and disinfecting the soiled area. Reduces the risk of cross-infection. Each kit contains soak up granules, cleaning liquid, rubber gloves, moistwipes, a scoop and aprons according to the number of applications for the kit.

BODY SPILL KITS 5.2


Biohazard KitCode BFD004This is a 2 application kit as per BFD001 and comes completewith a wall or vehicle mounting bracket.

Clean Up KitCode BFD005Contains rubber gloves, moist wipes a scoop and an apron,for a single application.

2 Application KitCode BFD001



D r i v e r E m e r g e n c y Pac ks

The standard kit includes a disposable camera to capture the scene of an accident, as well as a handy torch and disposable gloves. Enablingyou to deal effectively with punctures, break-downs, accidents, first aid and insurance claims.Housed in a nylon bag with velcro closure.

EMERGENCY KITS 5.3


Standard KitCode DEP0011 Disposable Overall1 Emergency Foil Blanket1 Basic First Aid Kit

1 Vent Aid Mouth to Mouth Tube1 Whistle1 Disposable Torch

1 Snap Light2 Pairs of Disposable Gloves10 Moist Wipes

Standard Kit with Hi-Vis Waist Coat. Code DEP001a

PCV KitCode DEP0021 Disposable Overall1 Emergency Foil Blanket1 PCV First Aid Kit

1 Vent Aid Mouth to Mouth Tube1 Whistle1 Disposable Torch

1 Snap Light2 Pairs of Disposable Gloves10 Moist Wipes

PCV Kit with Hi-Vis Waist Coat. Code DEP002a

HTA Spec KitCode DEP0031 Disposable Overall1 Emergency Foil Blanket1 Single Use Clean Up Kit1 Seat Belt Cutter1 Safety Hammer / Cutter1 Whistle

1 Disposable Torch1 Snap Light2 Pairs of Disposable Gloves10 Moist Wipes1 Hi-Visibility Waistcoat toEN471 Class 2

Drivers emergency packs can be tailored to meet with your requirements,for minimum quantity orders of 50 plus.

Emergency Warning TriangleCode EMT101Complies with EU regulations

H i g h Vi s i b i l i t y C l ot h i n g

HIGH VISIBILITY CLOTHING 5.4


Hi-Vis WaistcoatCode HVW001EN471 Class 2 Hi-Vis waistcoat in breathable warp knitted polyester.Single body band and braces.

Hi-Vis WaistcoatCode HVW002EN471 Class 2 Hi-Vis waistcoat in breathable warp knitted polyester.Double body bands and braces.

Hi-Vis JacketCode HVJ001EN471 Class 3 Hi-Vis jacket in breathable warp knitted polyester.Double arm bands, double body bands and braces.

Hi-Vis AnorakCode HVA001EN471 Class 3 Hi-Vis anorak. 4oz quilt with fixed 2oz lining, heavy duty 2 wayzip with studded storm flap, storm cuffs and concealed hood. 2 externalpockets with storm flaps and an internal chest pocket.

Hi-Vis TrousersCode HVT001EN471 Class 1 Hi-Vis waterproof over trousers in PU coated polyester. Doublebands on each leg. Used in conjunction with Class 2 or Class 3 garments

Class Guide: Class 2: Minimum requirementfor roadside use (for road speeds under 50mph).

Class 3: for use on motorways andother high speed roads (over 50mph).

* This is a simplistic guide, for more information refer to EN471.


S e at B e lt C u t t e r s a n d Sa f e t y H a m m e r s

SAFETY HAMMERS & CUTTERS 5.5

An essential piece of equipment designed for rescue, freeing passengers fromsafety restraints when the release mechanism is out of reach, or to enable escaperoutes through windows. We stock a range of cutters and hammers combinedwith cutters to suit your budget.

GuardianHammer/CutterCode HCT001

Martor SlavexHammer/CutterCode HCT003

Martor RuckHammer/CutterCode HCT004

Martor SOS CutterCode HCT005

Life Hammer/CutterCode HCT002

Documents

safety systems - Reflex Safety · Type 3 Genius Bus Belt safety systems Conceived by us some 14 years ago, the Genius Belt gives full inertia reel comfort together with adjustment