SAFETY STANDARDS JEOPARDYGAME RULES

1ST TEAM MUST HAVE THE ANSWER WHEN CALLED UPON, 2ND TEAM MAY HAVE A CHANCE TO ANSWER & MUST

HAVE THE ANSWER WHEN CALLED UPON

ANSWER MUST BE IN THE FORM OF A QUESTION

CORRECT ANSWER RECEIVES ONE POINT

INCORRECT ANSWER RECEIVES ONE NEGATIVE POINT

SCORES TABULATED THROUGHOUT THE DAY AND COUNT TOWARD FINAL JEOPARDY

TEAMS CAN WAGER ANY AMOUNT OF ACCUMULATED POINTS DURING FINAL JEOPARDY

CONFINED SPACE

NAME THE REQUIREMENT FOR A PERSON TO PERFORM ATMOSPHERIC TESTING:

WHAT IS MSHA CERTIFIED?

NAME THE REQUIREMENTS FOR CRM PERSONEL TO WORK IN A CONFINED SPACE OR BE AN ATTENDANT:

WHAT IS TRAINED, TESTED, & COMPETENT?

NAME THE REQUIREMENTS FOR CONTRACTOR PERSONEL TO WORK IN A CONFINED SPACE OR BE AN ATTENDANT:

WHAT IS TRAINED, TESTED, & COMPETENT?

VEHICLES & DRIVING

EACH MINE EMPLOYEE’S SITE DRIVER’S CERTIFICATE IS KEPT IN THIS LOCATION:

WHAT IS A PERSONAL TRAINING FILE IN THE TRAINING ROOM?

LEVEL OF DRIVER’S CERTIFICATION REQUIRED TO DRIVE IN THE PIT:

WHAT IS A LEVEL 1?

ISOLATION

NAME 3 EXAMPLES OF HAZARDOUS ENERGY:

WHAT ARE ELECTRICAL, PNEUMATIC, HYDRAULIC, STORED POTENTIAL, HEAT, OR RADIATION ENERGY?

NAME 3 OF THE DUTIES OF THE ISOLATION OFFICER:

WHAT ARE PLACING OR REMOVING ISOLATION LOCK AND D.N.O. TAG, ENSURE ALL OTHER LOCKS IN PLACE AND NAMES ON TAG, PERFORM TRY STEP, ENSURE MACHINE READY TO BE PUT INTO SERVICE?

WORKING @ HEIGHTS

NAME THE TYPE OF MOTORIZED EQUIPMENT THAT REQUIRES FALL PROTECTION AT ALL TIMES DURING TRANSPORT & OPERATION:

WHAT IS A MANLIFT, SIZZORLIFT, OR ELEVATING PLATFORM?

A FULL BODY HARNESS, SHOCK ABSORBING LANYARD, & SELF-LOCKING SNAP HOOKS OR CARABINERS ARE 3 COMPONENTS OF A FALL PROTECTION SYSTEM. NAME THE 4TH:

WHAT ARE SECURE ANCHORAGE POINTS?

CONFINED SPACE

THERE MUST BE CONTINUOUS VENTILATION OR APPROPRIATE BREATHING APPARATUS WHEN PERFORMING THIS KIND OF WORK:

WHAT IS WELDING, CUTTING, OR BURNING?

NAME TWO POTENTIAL HAZARDS OR HAZARDOUS CONDITIONS WITHIN A CONFINED SPACE:

WHAT ARE HEAT CAUSING FATIGUE, NOISE INTENSITY, FAILING EQUIPMENT, OR UNSTABLE MATERIALS IN THE ATMOSPHERE, WITHIN THE CONFINED SPACE?

GENERAL SAFETY SYSTEMSNAME 2 OF 3 TYPES OF INFORMAL RISK ASSESSMENTS:

WHAT ARE A PRE-SHIFT INSPECTION OF WORK AREA OR EQUIPMENT, WALK AROUND INSPECTION OF WORK AREA OR EQUIPMENT, & A “GOT A MINUTE” SAFETY VISIT?

A FORMAL RISK ASSESSMENT WILL IDENTIFY JOB TASKS OR ACTIVITIES AND ASSOCIATED HAZARDS. CONTROLS CAN THEN BE PUT IN PLACE TO _______OR ________ THE RISKS TO PERFORM THE JOB SAFELY.

WHAT ARE MINIMIZE OR ELIMINATE?

NAME 2 TYPES OF CONDITIONS THAT MAY REQUIRE A FORMAL RISK ASSESSMENT.

WHAT ARE CHANGING A WORK PROCEDURE, MOBILE EQUIPMENT, CONTRACTOR SAFETY MANAGEMENT, CREATING A NEW JOB POSITION, CONFINED SPACE ENTRY, ETC.?

VEHICLES & DRIVING

THE MINIMUM FOLLOWING DISTANCE IS 150’. NAME 1 OF 2 REASONS THIS DISTANCE MAY INCREASE.

WHAT IS SPEED OR WEATHER/ROAD CONDITIONS?

NAME THE 2 STIPULATIONS THAT MUST BE FOLLOWED WHEN TOWING ANOTHER VEHICLE.

WHAT ARE EQUIPMENT MUST BE DESIGNED FOR TOWING & ALL TOWING IS DONE WITH APPROVED DEVICES?

WE DO NOT PARK ON THE BLIND SIDE OF EQUIPMENT & WE PARK ONLY IN DESIGNATED AREAS. NAME THE 3RD ELEMENT OF THE PARKING RULE, AS IT APPLIES TO LIGHT VEHICLES (PLEASE BE SPECIFIC).

WHAT IS APPLYING THE PARK BRAKE WHEN LEAVING THE CAB, AND BLOCKING THE WHEEL ON A DOWN SLOPE?

GENERAL SAFETY SYSTEMS

TWO PLANT HANDS ARE GETTING READY TO DO SOME WELDING IN THE ROJO TRUCK DUMP AREA. THEY HAVE ISOLATED THE SYSTEM AND PERFORMED A “TRY” STEP, AND HAVE THE NECESSARY PPE, TOOLS, AND EQUIPMENT THAT THEY NEED TO SAFELY COMPLETE THE JOB. NAME 1 MORE PROCEDURE THAT MUST BE COMPLETED:

WHAT IS FILL OUT A HOT WORK PERMIT AND/OR BARRICADE?

THIS TYPE OF WORK AREA ALWAYS REQUIRES A HOT WORK PERMIT WHEN PERFORMING WELDING, CUTTING, OR GRINDING:

WHAT IS THE PLANT AND/OR A CONFINED SPACE?

NAME 4 REQUIREMENTS LISTED ON THE HOT WORK PERMIT:

WHAT ARE WASH AREA/REMOVE DUST, NO COMBUSTIBLES, PROTECT CONVEYOR BELTS, FIRE EXT., VENTILATE, PURGE GASES/SUBSTANCES, BARRICADE, INSPECT EQUIPMENT?

CHANGE MANAGEMENT

NAME 2 OF 3 QUESTIONS YOU SHOULD ASK REGARDING A CHANGE:

WHAT ARE WILL CHANGE POSSIBLY CAUSE 1) INJURY, 2) DAMAGE, OR REQUIRE SIGNIFICANT TRAINING?

NAME 2 ITEMS THAT MUST BE IDENTIFIED DURING A RISK ASSESSMENT:

WHAT ARE HAZARDS ASSOCIATED WITH CHANGE, HOW TO MINIMIZE RISKS, STANDARDS TO BE USED, CONTROLS REQUIRED, FURTHER STUDIES NEEDED, REQULATORY REQUIREMENTS, OR MEASURES IF TRIAL PERIOD USED?

WORKING @ HEIGHTS

FALL PREVENTION OR FALL PROTECTION IS REQUIRED WHEN THERE IS __________:

WHAT IS A DANGER OF FALLING?

NAME TWO EXAMPLES OF FALL PREVENTION:

WHAT ARE LADDER CAGES, SCAFFOLDS, OR PLATFORMS WITH COMPLETE FLOORS, HANDRAILS AND TOE BOARDS?

ISOLATION

TYPE OF LOCK USED BY ONE PERSON WHEN PERFORMING SERVICE OR REPAIRS:

WHAT IS A PERSONAL LOCK?

CRM REQUIRED METHOD FOR IDENTIFICATION OF A PERSONAL LOCK:

WHAT IS A BLUE WRAP AROUND NAME TAG?

CONFINED SPACES

WHEN PRACTICAL, THIS MUST BE PROVIDED AT ALL TIMES IN A CONFINED SPACE WITH A HAZARDOUS ATMOSPHERE:

WHAT IS VENTILATION?

NAME ONE OF 3 BODY POSITIONS THAT ARE CONSIDERED ENTRY INTO A CONFINED SPACE:

WHAT ARE A PERSON’S WHOLE BODY; UPPER BODY; OR HEAD WITHIN THE CONFINED SPACE?

ISOLATION

NAME 2 STEPS OF THE ISOLATION PROCEDURE THAT MUST BE PERFORMED BEFORE EQUIPMENT IS PUT BACK INTO SERVICE:

WHAT ARE CLEARING ALL PERSONNEL, MAKING SURE ALL GUARDS ARE IN PLACE, TOOLS REMOVED, LOCKS AND TAGS REMOVED?

THE FIRST LOCK TO BE APPLIED AND THE LAST REMOVED:

WHAT IS THE ISOLATION LOCK?

ELECTRICAL SAFETY

NAME 2 “CONTROLLED AREAS”, I.E. AREAS THAT SHOULD BE INACCESSIBLE TO UNAUTHORIZED PERSONNEL:

WHAT ARE ELECTRICAL PANELS, ENCLOSURES, CONTROL CENTERS, AND SUBSTATIONS?

EMPLOYEES AND CONTRACTORS RECEIVE ELECTRICAL HAZARD TRAINING PRIOR TO COMING TO WORK ON THE MINE SITE, AS WELL AS THIS OTHER TIME:

WHAT IS ANNUAL REFRESHER TRAINING?

VEHICLES & DRIVING

THIS SAFETY EQUIPMENT MUST BE WORN AT ALL TIMES:

WHAT IS A SEAT BELT?

BESIDES PASSING ANOTHER VEHICLE, NAME ANOTHER SITUATION WHERE POSITIVE RADIO READBACK MUST TAKE PLACE :

WHAT IS ISSUING INSTRUCTIONS TO THE OPERATOR OF ANY PIECE OF EQUIPMENT, APPROACHING A DRAGLINE OR SHOVEL (WITHIN 150’), WORKING NEAR/WITHIN THE SWING RADIUS OF A DRAGLINE OR SHOVEL?

ELECTRICAL SAFETY

MSHA REQUIRES ELECTRICIANS TO BE _________ ON A YEARLY BASIS:

WHAT IS RE-CERTIFIED?

WRITTEN WRITTEN SAFE WORK PROCEDURES ARE REQUIRED ARE REQUIRED WHEN IT IS NECESSARY TO WHEN IT IS NECESSARY TO WORK ON LIVE WORK ON LIVE EQUIPMENT FOR THE PURPOSES OF EQUIPMENT FOR THE PURPOSES OF __________________________ :

WHAT ARE TROUBLESHOOTING OR TESTINGTROUBLESHOOTING OR TESTING?

ISOLATION

NAME THE PERSON WHO APPLIES THE ISOLATION LOCK & TAG AND COMPLETES THE “TRY” STEP FOR A CONTRACTOR WHO IS WORKING ON CRM EQUIPMENT:

WHO IS A CRM EMPLOYEE TRAINED AS AN I. O.?

EXPLAIN HOW A “DO NOT OPERATE” TAG OUT PROCEDURE IS DIFFERENT FROM AN ISOLATION PROCEDURE:

WHAT IS REMOVING EQUIPMENT FROM SERVICE UP TO THE POINT THAT REPAIR OR SERVICE WORK IS TO BEGIN, PREVENTING A PERSON FROM OPERATING THE EQUIPMENT?

VEHICLES & DRIVING

THIS MUST BE WORN IN ALL VEHICLES ON THE MINE SITE & IN ALL COMPANY VEHICLES THAT LEAVE THE MINE SITE:

WHAT IS A SEAT BELT?

DO NOT APPROACH OR PARK ON THIS SIDE OF ANY EQUIPMENT:

WHAT IS THE BLIND SIDE?

GENERAL SAFETY SYSTEMS

PERSON, ALONG WITH CREW TRAINERS, THAT IS RESPONSIBLE FOR ENSURING THAT ALL EMPLOYEES ARE TRAINED AND EQUIPPED TO DO THEIR WORK ACCORDING TO SAFE WORK PROCEDURES:

WHO IS THE TRAINING COORDINATOR?

AN INFORMAL FIRST PARTY SAFETY AUDITING SYSTEM THAT HELPS RAISE SAFETY & HAZARD AWARENESS:

WHAT ARE “GOT A MINUTE” SAFETY VISITS?

WORKING @ HEIGHTS

WHERE PRACTICAL, ANCHORAGE POINTS MUST BE ABOVE THE HEAD OF THE WORKER AND PREVENT THIS FROM HAPPENING IF A FALL OCCURS:

WHAT IS SWING OR TOUCH THE GROUND?

IN ADDITION TO INSPECTION PRIOR TO USE, ANCHORAGE POINTS ARE TO HAVE A VISUAL INSPECTION ON WHAT TYPE OF BASIS :

WHAT IS YEARLY?

GENERAL SAFETY SYSTEMS

MSHA REQUIRES NEW HIRES TO ATTEND 40 HOURS OF NEW MINER TRAINING. NAME 3 OF THE AREAS OF SITE SPECIFIC TRAINING WE COMPLETE ON SITE:

WHAT ARE INTRO. TO WORK ENVIRONMENT, TRAFFIC PATTERNS, COMMUNICATIONS, HEALTH AND SAFETY ISSUES, HAZARD RECOGNITION, EMERGENCY PLANS, AND GROUND CONTROL?

GIVE 4 EXAMPLES OF SAFETY SYSTEMS HERE AT CRM:

WHAT ARE MINE S. I. A. P., IND. S. I. A. P., CRM SAFETY STANDARDS, RISK ASSESSMENTS, EMERGENCY PLANS, ENVIRON. EMERGENCY PROCEDURES, TASK TRAINING PROGRAM & GENERAL SOPs, EMERGENCY SQUAD, ACCIDENT/INCIDENT INVESTIGATION, SAFETY TASK FORCE?

VEHICLES & DRIVING

POSITIVE CONTACT MUST BE MADE AT THIS MINIMUM DISTANCE WHEN APPROACHING BOOM RADIUS OF SHOVEL OR DRAGLINE :

WHAT IS 150 FEET?

SPEED LIMIT IN THE SHOP AREAS:

WHAT IS A 10 MPH?

CONTRACTOR SAFETY MANAGEMENT

2 SKV HANDS HAVE ARRIVED AT 1 AM TO WORK ON 153. THE LEAD MUST ENSURE THAT ALL PAPERWORK IS CURRENT BEFORE WORK COMMENCES. NAME 3 OF 6 ITEMS THAT MUST BE CHECKED:

WHAT ARE AR/NEW MINER TRAINING, SITE-SPECIFIC TRAINING, WORK AREA TOUR FOR HAZARDS, WORK PERMIT REVIEW, CURRENT TASK TRAINING ON CRC EQUIP., REVIEW OF SAFETY STANDARDS?

NAME THE PROCESS TO DETERMINE WHICH SKV HAND WILL BE THE I. O.:

WHAT IS NONE? ONLY CRM PERSONNEL TRAINED AS AN I.O. CAN BE AN I. O.

ELECTRICAL SAFETY

ELECTRICAL DEPARTMENT SHALL ______________ TO ELECTRICAL DEPARTMENT SHALL ______________ TO AREAS CONTAINING ELECTRICAL EQUIPMENT:AREAS CONTAINING ELECTRICAL EQUIPMENT:

WHAT IS CONTROL ACCESS?

_____________________ WILL SHOW: SYSTEM FAULT _____________________ WILL SHOW: SYSTEM FAULT CALCULATIONS; EQUIPMENT DETAILS; ELECTRICAL CALCULATIONS; EQUIPMENT DETAILS; ELECTRICAL PROTECTION DISCRIMINATION CURVES; AND CABLE PROTECTION DISCRIMINATION CURVES; AND CABLE RATINGSRATINGS:

WHAT ARE SINGLE LINE DIAGRAMS OR SCHEMATICS?

CONFINED SPACE

A CONFINED SPACE IS IDENTIFIED BY A STICKER, A SIGN OR _________:

WHAT IS A MAP LOCATION?

PERIOD OF TIME WHEN A CONFINED SPACE PERMIT IS FIRST REVIEWED WITH ALL ENTRANTS AND ATTENDANTS:

WHAT IS BEFORE ENTRY?

ISOLATION

NAME THREE CONDITIONS OF THE ISOLATION SYSTEM THAT MUST BE IN PLACE WHEN THREE ELECTRICIANS ARE WORKING TOGETHER :

WHAT IS AN ISOLATION LOCK, “DO NOT OPERATE” TAG, AND A PERSONAL LOCK FOR EACH PERSON?

WHAT IS AN ISOLATION LOCK AND “DO NOT OPERATE” TAG FOR EACH CRAFT, PERSONAL LOCK FOR EACH PERSON IN EACH CRAFT?

DESCRIBE A MULTIPLE ISOLATION PROCEDURE:

WORKING @ HEIGHTS

IT MUST BE TIED OFF OR SUPPORTED BELOW, REQUIRES FALL PROTECTION WHEN WORKING OFF IT, MUST MAINTAIN 3 POINTS OF CONTACT WHEN CLIMBING UP OR DOWN IT:

WHAT IS A LADDER?

THIS IS DONE TO PROTECT OR WARN PERSONNEL OF OVERHEAD WORK AREAS:

WHAT IS BARRICADING?

CHANGE MANAGEMENT

WHAT IS CHANGES TO PLANT OR EQUIPMENT; PROCESSES; OPERATING PROCEDURES; DESIGN AND CONSTRUCTION; MAINTENANCE PROCEDURES; GROUND CONTROL; MINE LAYOUT, BLASTING PROCEDURES?

TYPE OF ASSESSMENT THAT IDENTIFIES ALL HAZARDS ASSOCIATED WITH THE CHANGE:

WHAT IS A RISK ASSESSMENT?

NAME TWO TYPES OF CHANGES THAT MAY CREATE A HIGH POTENTIAL RISK AREA WITH THE POTENTIAL TO CAUSE INJURY, DAMAGE TO PHYSICAL ASSETS, OR REQUIRE SIGNIFICANT TRAINING TO THOSE AFFECTED BY THE CHANGE:

ISOLATION

A STEP-BY-STEP DIAGRAM THAT HELPS A PERSON DETERMINE AN ISOLATION SITUATION:

WHAT IS AN ISOLATION FLOWCHART OR MATRIX?

TYPE OF TAG THAT MUST BE IDENTIFIABLE, NO INITIALS, FEDERAL OFFENSE TO RUN EQUIPMENT WITH THIS TAG ATTACHED:

WHAT IS A “DO NOT OPERATE” TAG?

GENERAL SAFETY SYSTEMS

NAME TWO RESOURCES WHERE SAFE WORK PROCEDURES FOR ALL HAZARDOUS ACTIVITES CAN BE FOUND:

WHAT ARE CRM SAFETY STANDARDS, EMERGENCY DISASTER MANAGEMENT RESPONSE PLAN, ENVIRONMENTAL EMERGENCY PROCEDURES, OR GENERAL SOPs?

BESIDES THE ENJOYMENT AND FELLOWSHIP, WE ATTEND 8 HOURS OF ANNUAL REFRESHER EACH YEAR FOR THIS REASON:

WHAT IS REQUIRED BY FEDERAL LAW (MSHA)?

FIELD SERVICE ISOLATION

THIS STEP IS TAKEN TO ENSURE THE MACHINE CANNOT MOVE FORWARD OR BACKWARD:

WHAT IS A “TRY” FOR MOVEMENT OR “TRY” STEP?

THIS IS THE MACHINE OPERATOR’S LOCATION DURING FIELD SERVICE:

WHAT IS ON THE GROUND?

CONTRACTOR SAFETY MANAGEMENT

NAME THE CATEGORY FOR COMPANIES OR INDIVIDUALS ENGAGED IN A DISCRETE PROJECT AWAY FROM OPERATION AREAS. EXAMPLES MAY INCLUDE DRAGLINE ERECTION, EXPLORATION DRILLING :

WHAT IS A CATEGORY 2 CONTRACTOR?

SLS IS A CAT. 3 CONTRACTOR THAT REQUIRES A WORK PERMIT. THE PERMIT MUST BE __________ BY KEC PERSONNEL WITH A SLS REP BEFORE EACH SHIFT:

WHAT IS REVIEWED?

GENERAL SAFETY SYSTEMS

WHEN SAFETY INCIDENTS MUST BE REPORTED:

WHAT IS IMMEDIATELY?

BRIEF MEETING CONDUCTED AT THE START OF EACH SHIFT FOR ALL OPERATING DEPARTMENTS:

WHAT IS A SAFETY HUDDLE?

CONTRACTORSAFETY MANAGEMENT

NAME THE CATEGORY FOR CONTRACTORS ENGAGED IN TEMPORARY WORK DIRECTED BY SITE’S SUPERVISION. (E.G. ADDECO TEMPORARIES IN THE WAREHOUSE, TONY HAYDEN AS A TRUCK DRIVER

WHAT IS A CATEGORY 1?

A CATEGORY 2 CONTRACTOR REQUIRES ___ WORK PERMIT :

WHAT IS NO?

ISOLATION

THIS STEP ENSURES THAT THE PLANT OR EQUIPMENT HAS REACHED A “ZERO” ENERGY STATE:

WHAT IS A “TRY” STEP?

THIS ENSURES AN ABSENCE OF VOLTAGE:

WHAT IS A “TEST” FOR VOLTAGE?

FIELD SERVICE ISOLATION

A MOTOR GRADER IS SERVICED BY THE LUBEMAN. DESCRIBE 3 0F THE 6 STEPS FOR FIELD SERVICE ISOLATION:

WHAT IS:

HAVE MACHINE AT A COMPLETE STOP, GEAR SELECTOR IN NEUTRAL,

ENGAGE PARK BRAKE AND/OR SERVICE BRAKES,

LOWER IMPLEMENTS TO THE GROUND,

OPERATOR ON THE GROUND,

PLACE FIELD SERVICE ISOLATION SYSTEM IN PLACE; ISOLATION AND/OR PERSONAL LOCKS AS NECESSARY, “DO NOT OPERATE” TAG IN PLACE, NAMES ON TAG,

“TRY” FOR FORWARD OR BACKWARD MOVEMENT PERFORMED BY DESIGNATED ISOLATION OFFICER?

GENERAL SAFETY SYSTEMS

AN INDIVIDUAL’S PLAN FOR ELIMINATING ALL INJURIES:

WHAT IS A SAFETY IMPROVEMENT ACTION PLAN?

INDIVIDUAL SAFETY IMPROVMENT ACTION PLANS ARE DISCUSSED AND AGREED UPON HOW FREQUENTLY:

WHAT IS YEARLY, DURING PERFORMANCE REVIEW?

CONFINED SPACE

WMS IS ON SITE TO WELD INSIDE EACH SHOE ON 150. NAME THE NUMBER OF ATTENDANTS NEEDED:

WHAT IS 2, ONE FOR EACH ENTRANCE?

NAME 3 OF 6 THINGS THAT MUST TAKE PLACE BEFORE THE ENTRANTS GO INSIDE:

WHAT ARE DISCUSSION OF HAZARDS, DISCUSSION OF EMERGENCY PROCEDURES, TESTING OF ATMOSPHERE, ATTENDANT STATIONED OUTSIDE ENTRANCE, SIGN IN OF ENTRANTS ON CS PERMIT, VENTILATION PROCEDURE IN PLACE?

CHANGE MANAGEMENT

THE HIGHWALL HAS FALLEN AT RAMP 10 & CREATED ONE-LANE TRAFFIC. THIS DOCUMENT ENSURES THAT ALL PERSONNEL AFFECTED HAVE BEEN NOTIFIED OF THE CHANGE & ADDED SAFETY PRECAUTIONS ARE IN PLACE:

WHAT IS THE UMOC?

UMOC IS AN ACRONYM FOR THIS:

WHAT IS AN UNPLANNED MANAGEMENT OF CHANGE?

FIELD SERVICE ISOLATION

TYPE OF ASSESSMENT THAT IDENTIFIES HAZARDS THAT MAY PRESENT THEMSELVES PRIOR TO FIELD SERVICE:

WHAT IS AN INFORMAL RISK ASSESSMENT OR WALK AROUND INSPECTION OF THE WORK AREA?

IF THE FIELD SERVICE SWITCH IS NOT WORKING PROPERLY, NAME THE COURSE OF ACTION :

WHAT IS PERFORMING A COMPLETE MACHINE ISOLATION PROCEDURE, OBTAINING “ZERO” ENERGY STATE?

WORKING @ HEIGHTS

REGARDING FALL PROTECTION, THIS MUST BE DONE FOLLOWING A FALL, WHEN MECHANICAL MALFUNCTION IS EVIDENT, OR WHERE INSPECTION BEFORE USE SHOWS EXCESSIVE WEAR:

WHAT IS TAKEN OUT OF SERVICE?

FREQUENCY THAT WORKING AT HEIGHTS KITS FOUND ON DRAGLINES, DRILLS AND SHOVELS SHOULD BE INSPECTED BY PERSONNEL:

WHAT IS ONCE A SHIFT?

GENERAL SAFETY SYSTEMS

NAME 2 OF THE 4 METHODS OF ENCOURAGING, COLLECTING, EVALUATING, AND IMPLEMENTING SAFETY SUGGESTIONS :

WHAT ARE SAFETY MEETINGS, COMMUNICATION MONITORS, SAFETY TASK FORCE, AND “GOT A MINUTE” SAFETY VISITS?

CRM EMPLOYEES ARE REQUIRED BY MSHA TO DEMONSTRATE THIS IN A 12 MONTH PERIOD TO MAINTAIN CERTIFICATION ON EQUIPMENT & JOB TASKS:

WHAT IS SAFE OPERATION OF EQUIPMENT OR SAFE PERFORMANCE OF WORK DUTIES?

CONTRACTOR SAFETY MANAGEMENT

NAME THE PEOPLE RESPONSIBLE FOR ENSURING THAT CONTRACTOR EMPLOYEES FOLLOW CRM SAFETY RULES & REGULATIONS:

WHO IS ALL CORDERO ROJO PERSONNEL?

NAME THE CRM PERSON WHO IS RESPONSIBLE FOR ENSURING THAT ALL CONTRACTOR EMPLOYEES TRAINING IS CURRENT:

WHO IS THE PROJECT COORDINATOR?

CONFINED SPACE

NAME THE TYPE OF PPE UTILIZED WHEN THERE IS NO AUDIO OR VISUAL CONTACT AND RESPIRATORY EQUIPMENT IS TO BE WORN BY ENTRANTS:

WHAT IS A HARNESS AND/OR LIFELINE, OR PERSONAL ALERT SAFETY SYSTEM (P.A.S.S.)?

NAME THE TIME LIMIT FOR NATURAL VENTILATION BEFORE RE-TESTING THE ATMOSPHERE AFTER ENTRANTS HAVE BEEN EVACUATED DUE TO A HAZARDOUS ATMOSPHERE:

WHAT IS 30 MINUTES?

CONFINED SPACE

DEPARTMENT TO RECEIVE ENTRY FORM UPON JOB COMPLETION:

WHAT IS THE SAFETY DEPARTMENT?

WHERE TO TEST FOR TOXIC MATERIALS:

WHAT IS THE “BREATHING” ZONE OR IMMEDIATE WORK AREA?

ISOLATION

NAME THREE TYPES OF HAZARDOUS SUBSTANCES THAT COULD HAVE THE POTENTIAL TO CAUSE INJURY OR ILLNESS :

WHAT ARE SOLIDS, GASES, VAPORS, LIQUIDS, OR DUSTS?

NAME THE COLOR OF AN PERSONAL LOCK:

WHAT IS NO COLOR?

CONFINED SPACE

NAME TWO WORK ACTIVITIES THAT ARE MORE HAZARDOUS IN A CONFINED SPACE:

WHAT IS HOT WORK, CHEMICAL CLEANING, STEAM CLEANING, OR ABRASIVE BLASTING?

NAME THREE REQUIREMENTS OF THE ATTENDANT:

WHAT ARE TRAINED, HAS NO OTHER DUTIES, ACCOUNT FOR PERSONNEL, STATIONED AT THE ENTRANCE, HAVE ACCESS TO PERMIT, COMMUNICATION WITH ENTRANTS, IMMEDIATELY ACQUIRE RESCUE ASSISTANCE?