2
A2 SAFETY AND MAINTENANCE 1. The product is not waterproof so keep it from water, and do not immerse it in the water. 2. Do not pull, tangle, squeeze or trample the power cords, or hang heavy objects on power cords in case of any damage to the insulating layer or any fault such as short-circuit or poor contact. 3. Disconnect the power supply before putting the lampshade out of use or moving the lampshade to avoid scalding or accident. 4. Check if the power cord is damage; do not use the damaged one. 5. In case of any smoke or other abnormalities, promptly unplug the power supply to avoid accident; contact 6. This product shall not be used by persons (including children) of reduced physical, sensory or mental experienced adults to ensure their safety. The children shall be under close watch to ensure that they are not playing with the equipment. 7. All parts of this product are not intended for other uses. 8. T , or use it at the temperature below 0°C or above 30 °C. 9. To avoid accidents, before replacing the bulb, disconnect the plug from the power outlet. If the bulb in cool down before replacing it. 10. In normal use, take measures to prevent people or animals from touching the bulb or any part of the product in case of burn. No.59,Liantang Road,Sanzhongcun,Qingxi Town, Dongguan,Guangdong,China,523651 Tel: 86- 769- 87841199 Tmall: reptizoo.tmall.com Overseas Sales: [email protected] China Sales: [email protected] www.repti-zoo.com Dongguan ETAN Pet Supplies Co.,Ltd. CLAMP LAMP INSTRUCTION 6. Connect the power supply, and turn on the switch on the power cord to power the lighting lamp or heating lamp. st st st st st

SAFETY AND MAINTENANCE CLAMP LAMP INSTRUCTION

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SAFETY AND MAINTENANCE CLAMP LAMP INSTRUCTION

A2

SAFETY AND MAINTENANCE 1. The product is not waterproof so keep it from water, and do not immerse it in the water.2. Do not pull, tangle, squeeze or trample the power cords, or hang heavy objects on power cords in case of any damage to the insulating layer or any fault such as short-circuit or poor contact.3. Disconnect the power supply before putting the lampshade out of use or moving the lampshade to avoid scalding or accident.4. Check if the power cord is damage; do not use the damaged one.5. In case of any smoke or other abnormalities, promptly unplug the power supply to avoid accident; contact

6. This product shall not be used by persons (including children) of reduced physical, sensory or mental

experienced adults to ensure their safety. The children shall be under close watch to ensure that they are not playing with the equipment.7. All parts of this product are not intended for other uses.8. T , or use it at the temperature below 0°C or above 30 °C.9. To avoid accidents, before replacing the bulb, disconnect the plug from the power outlet. If the bulb in

cool down before replacing it.10. In normal use, take measures to prevent people or animals from touching the bulb or any part of the product in case of burn.

No.59,Liantang Road,Sanzhongcun,Qingxi Town,Dongguan,Guangdong,China,523651Tel: 86- 769- 87841199Tmall: reptizoo.tmall.comOverseas Sales: [email protected] Sales: [email protected]

www.repti-zoo.com

Dongguan ETAN Pet Supplies Co.,Ltd.

CLAMP LAMP INSTRUCTION

6. Connect the power supply, and turn on the switch on the power cord to power the lighting lamp or heating lamp.

st

st

st

st

st

Page 2: SAFETY AND MAINTENANCE CLAMP LAMP INSTRUCTION

USAGE METHOD 1. Take the dual dome out from the package, check whether the power cord is in good condition, do not use the damaged power cords.2. Fit the appropriate bulbs into the lamp holder in the lampshade before the plugs is plugged in the outlet.

damage to the bulb due to excessive torque.) 3. I • Put the Dual dome directly on the top metal mesh of REPTIZOO RK series reptile terrariums. Remove

• Fit the metal hook into the small hole in the upper part of the lampshade, and then hang the lamp on the reptile terrarium together with the REPTIZOO hanging bracket LH001/7 (purchased separately).

PRODUCT FEATURES1. Cool black vanished aluminum alloy shell.

3. Equipped with power cords with independent switches, easy and safe to operate.4. Provided with metal hooks, used for suspending REPTIZOO brand products (hanging bracket LH001/7 purchased separately).

TECHNICAL PARAMETERS1. Power: Max. 150W*2.2. Size: 285x145x200mm.

PRODUCT OVERVIEW

PACKING LIST1. Dual dome: 1 piece2. Metal hook: 2 pieces

1. Thank you for purchasing REPTIZOO products.

st st

3. Instructions: 1 copy

promptly.

st4. Sort out string: 1 piece

st

st st

Polished tinplate

WARNING1.

2.

3.

4.

5.

Check the power cable for damage, compression deformation

do not use the power cable, but send it to the manufacturer or replace it by its service agent or related professionals to avoid danger.Power supply failing to meet the parameters shall not be used for fear of damage of the heater.In case of unexpected smoke or other abnormity of this product,

send this product to the manufacturer or its agent or the related technicians for inspection and maintenance.To avoid accidents, before replacing the bulb, disconnect the plug from the power outlet. If the bulb in normal working

let the bulb completely cool down before replacing it.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have

-Children shall not play with the appliance.-Cleaning and user maintenance shall not be made by children without supervision.

stst

st