Saf-Tech catalog

SAF-TECH, Inc.12440 Highway 3

Houston, TX 77598

WWW.SAFTECHINC.COM . 1.800.388.6308

Quality . Service . Excellence .

CATALOG

3116SAFTECH CATALOG CVR.indd 1 12/21/09 1:51 PM

MADE IN THE U.S.A.

WORKMANSHIP

“Our garments are sold throughout North America, solely through our distribution partnerships.

We believe this is the most effective way to achieve consistent growth and unparalleled service; while

staying true to our commitment as being a leading flame-resistant clothing manufacturer.

Saf-Tech is dedicated to being the best FR clothing manufacturer in the marketplace by utilizing years of

experience in the safety industry and in the apparel manufacturing sector. We will continue to take the high

ground in every situation, and will not cut corners when it comes to our reputation in the marketplace.”

Steve McCroryPresident

Saf-Tech is known for the quality, versatility and consistency expected from a protective apparel manufacturer. Our garment production experts have an average of twenty plus years experience in the design and construction of superior Flame-Resistant work wear.

We proudly stand behind every piece we manufacture. Saf-Tech is committed to a 100% satisfaction guaranteed policy. If there is ever a problem with the construction or durability of our garments we will gladly replace it under normal wearing conditions, within the first 12 months.

POLICIES

STANDARD TERMS AND CONDITIONS OF SALE - Please refer to our website at www.saftechinc.com for more information on standard terms and conditions, or contact us at: 1-800-388-6308

RETURNS and EXCHANGES - Refer to the current pricing guideline, visit our website at www.saftechinc.com,or contact us at: 1-800-388-6308


Look for the American Flag next to each of our productsthat are available to be made in the U.S.A.

“We know what matters most to those who are on the job everyday.”

Saf-Tech Inc., is a leading innovator in the flame resistant work wear industry. With over 30 years of manufacturing experience on our side, we know what matters most to those who are on the job every day. Headquartered in Houston, TX where the need for protective apparel began, we constantly stay ahead of the curve in an industry that continuously evolves. Utilizing state of the art technology, and

employing the best manufacturing professionals available; we’re ready for the unexpected.

We pride ourselves on delivering nothing less than the best in every piece we manufacture. It’sspelled out in three simple words: Quality . Service . Excellence.



Oil & Gas

Petro-Chemical

Electrical

Construction

Manufacturing

Utility

Welding

QUALITY

Our garments are made to last. We ensure the selection and cut of our garments will be constructed to meet the highest industry specifications; allowing zero room for error, and providing the wearer comfort while being assured the garment will last under the most strenuous of conditions.

SERVICE

We understand delivery is not the only expectation of our customers. We have highly trained sales and customer service teams committed to supporting your every need. Whether it is helping to customize an FR program, developing specialized products or processing orders in a timely and efficient manner, we are ready to meet your expectations.

EXCELLENCE

Our management is committed to providing the absolute best products and services to our customers everyday! We continually strive to optimize our business in order to meet end-user needs. With over 100 years of combined experience, the Team at Saf-Tech has the tools necessary to provide the industry’s best products to save lives. It’s just that simple!

3116SAFTECH CATALOG TXT.indd 1 12/22/09 3:38 PM

2

Understanding FR Basics

This section was written in an effort to provide the reader some basic working knowledge of the flame resistant industry and to learn more about what standards and specifications drive the decision making process. Keep in mind there are several organizations that have specific criteria in which they test, certify and issue standards for the flame-resistant community. Most of them are separate entities, but ultimately working for the same goals: Overall awareness to the public, determining thresholds for safe work practices and enforcement as a preventative for non-compliance. These consensus organizations have the largest impact in helping OSHA (Occupational Safety and Health Administration, division of U.S. Dept. of Labor) evaluate best industry practices to determine what will be governed under the law.

FR (Flame-Resistant) clothing is designed as a means for protection against potentially fatal flash fire and arc flash environments. They provide the wearer a few seconds of necessary escape time, while preventing clothing ignition. Remember that the majority of severe and fatal burn injuries are due to the individual’s clothing igniting and continuing to burn, not by the exposure itself. The goal for any FR manufacturer or wearer is to ultimately increase the probability of survival. No garment or fabric is available in primary protection as fail-safe insurance. In other words, if an accident does take place it is most likely that some injury will occur; however, the design of both fabrics and apparel is to lower the risk of injury and possible death.

Given the staggering costs of insurance and hospital related claims due to burn victims, it’s always more feasible to institute an FR apparel program where there is possible exposure to such injuries. With the average cost of a burn injury victim in the hundreds of thousands, and sometimes millions of dollars, not to mention the long term care needed, it seems like a small price for $40 shirt. FR clothing, in most cases, is more expensive than regular work clothing; however, many FR fabrics are designed to last much longer than regular work clothes while at the same time providing protection against potential hazards. So the actual cost of ownership in many cases is lower. Knowing you spent a little more to save a life will no doubt provide the piece of mind which no amount of money can give.

Many times industry veterans find it difficult to believe that wearing such protection is valuable and even necessary after working 30+ years in an environment where they personally have never experienced an accident or even known someone who has. Our response is simple: No one calls it an accident because it was expected to happen.

So what is the best FR fabric for me?

Unfortunately there is no magic answer to this seemingly difficult and often scrutinized question. A point to remember is that FR fabrics share a similar trait in which they are designed to allow the wearer a few seconds of necessary escape time during an arc flash or flash fire situation. They can never calculate variables such as working distance from an energized part, humidity levels, body temperature, ambient temperature, job application or any conceivable factor which could contribute to a different result outside of a testing lab. To help keep it simple, our response is in line with the expectations of OSHA; and that is to use common sense in evaluating fabric choices and follow the industry’s history of proven protection.

DO I HAVE TO COMPLY WITH NFPA 70E?

Remember that NFPA (National Fire and Protection Agency) is a third party standards organization which provides the template for decision makers to more easily comply with the terms set forth by OSHA 29 CFR 1910.269. NFPA 70e voluntary consensus standard requiring employees to wear flame resistant (FR) clothing and or clothing systems that meets the requirements of ASTM F1506 wherever there is possible exposure to an electric arc flash. It requires employers to conduct a flash hazard analysis to determine the flash protection boundary distance as well as protecting employees working inside these flash protection boundaries by requiring protective clothing for the corresponding Hazard Risk Category with an arc thermal performance value (ATPV) of at least the value listed in the “Protective Clothing Characteristics” section of the standard.


3

Product Inform

ation & Evaluation

So what are the keys to evaluating the aspects of an FR program?

With dozens of blends and choices available, you should evaluate every aspect of your program and decide which particular fabric provides you with the best overall VALUE.

A simple formula will go a long way… Value = Protection + Comfort + Cost.

Keys to Evaluating Protection

1. The first step in evaluating a protective clothing program is to identify the potential hazard. Exposures suchas a flash fire and electric arc flash are unique hazards with vastly different characteristics. It is important to

note that test results from flash fire and electric arc exposures do not directly correlate to each other and results should not be substituted when evaluating performance to these specific hazards.

2. The second step is to identify industry consensus standards for the exposure. Fortunately, new industry standards have recently been developed to standardized methods for flash fire and electric arc testing and some also provide minimum performance requirements.

3. Finally, testing should be performed at independent laboratories to ensure unbiased and scientificallyvalid results.

4. Saf-Tech only selects fabrics for manufacturing which have met the above criteria.

Keys to Evaluating Comfort

1. Comfort is inherently subjective; cannot currently be quantified-too many variables; fit, style, fiber, fabric, hand, drape, breathability, moisture management, weight, color, personal psychology, etc.

2. Weight does not directly equal comfort except within a fiber/fabric type

3. Never make comfort decisions from graphs, data, office samples or appearance.

4. There is no substitution for a wear trial. A wear trial is the only real way to evaluate the comfort between the flame resistant fabrics that meet the protective requirements established. A wear trial also allows for employeeinvolvement and buy-in on a protective clothing program.

Keys to Evaluating Cost

• Value expresses the cost to own over the life cycle (initial cost x durability)

• Also should involve wearer acceptance, protection & out-of-service replacement cost

• Can involve direct sale, lease, rental and services

• The target: relatively low initial cost, good durability, wearer acceptance, excellent protection & multiple threat (if relevant)

Is there a difference between Inherent and treated Flame-Resistant Fibers/Fabrics?

• Inherently flame-resistant fibers/fabrics retain this characteristic as a result of the manufacturing process of

synthetic fibers, such as Nomex IIIA® and PBI Gold®.

• Treated fibers/fabrics undergo an application process which a retardant chemical is applied to the fabric, altering

the molecular structure of the fibers thus making it flame-resistant.

Both “styles” of FR fabrics should be able to maintain their FR properties for the life of the garment. There are FR fabrics available which have limited wear life and must be monitored to ensure they have not exceeded their specified intent, whether it be shelf life, laundry cycles, or have not been processed consistent with the fabric manufacturers laundry instructions.

Saf-Tech only uses UL certified fabrics and components, which are guaranteed to be flame-resistant for the life of the product. If you have additional questions regarding these or any other subjects related to this matter, please visit our website or contact your local Saf-Tech Representative.


4

Daily Wear Index

Coveralls ...................................... 6-7

Bib / Lab Coat ............................... 8-9

Trousers .................................... 10-12

Shirts ........................................ 13-15

Outer Wear Index

Jackets / Coats ........................... 16-18

Bib Overalls ............................... 19-20

Insulated Coveralls ........................... 21

Reference Guide Index

Measuring Charts ............................ 22

Style number’s, colors ...................... 23

Indura®, Indura Ultra Soft® and Moda-Quilt® are registered trademarks of Westex Inc. Nomex® and Kevlar® are registered trademarks of DuPont. Firewear® is a trademark of Springfield Industries. PBI Gold® is a registered trademark of Performance Products Inc.

...................................................................................... 8 cal/cm2

Hazard Risk Category Minimum Performance

............................................................................................. 4 cal/cm2

.......................................................................... 25 cal/cm2

................................................................ 40 cal/cm2

We make choosing garments for NFPA 70E hazards a snap! Look for the HRC tagssewn on the outside of every Saf-Tech garment for easy compliance assessment.

3HRC

2HRC

1HRC

4HRC


5

Available in our new Arctic Line

HRC


6

Cove

ralls

Zippered Front Oil Field Coverall

Deluxe Coverall

7oz Indura® (JSZP07)

ATPV SIZE GROUP

8.4 cal/m2 A

9oz Indura® (JSZP16)

ATPV SIZE GROUP

11.5 cal/m2 A

4.5oz Nomex® IIIA (JSZP15)

ATPV SIZE GROUP

4.8 cal/cm2 A

The same design as our popular JS work style coverall, but designed to withstand the harshest conditions of day-to-day oil field work. Complete with two front and one rear zippered style pockets, two-way Nomex® brass break-away zipper.

80

80

80

90

90

90

7oz Ultra Soft® (SPJS32)

ATPV SIZE GROUP

8.7 cal/m2 A

6oz Nomex® IIIA (SPJS14)

ATPV SIZE GROUP

5.7 cal/ A 00

00

25

25 75

4.5oz Nomex® IIIA (SPJS15)

ATPV SIZE GROUP

4.8 cal/ A

Six pocket design, stand up collar with flaps on both chest pockets, double needle reinforcements, bi-swing back, two-way Nomex® brass break-away zipper, bar-tacked at all stress points, side vent openings, ruler and pencil pocket, finished cuffs and elastic waist inserts.

00 25

1HRC

1HRC

1HRC

2HRC

2HRC

2HRC


7

Coveralls

Work Style Coverall

Contractor Coverall

7oz Ultra Soft® (JS32)

ATPV SIZE GROUP

8.7cal/m2 A 00 25 75

9oz Indura® (JS16)

ATPV SIZE GROUP

11.5 cal/m2 A

4.5oz Nomex® IIIA (JS15)

ATPV SIZE GROUP

4.8 cal/cm2 A 00 25 50 75 80 90

Six pocket design, two chest pockets, double needle reinforcements, bi-swing back, two-way Nomex® brass break-away zipper, bar-tacked reinforcements at all stress points, side vent openings, ruler and pencil pocket, finished cuffs with snaps, elastic waist inserts.

7oz Ultra Soft® (CJS32)

ATPV SIZE GROUP

8.7 cal/m2 A

9oz Indura® (CJS16)

ATPV SIZE GROUP

11.5 cal/m2 A 00 25 50 75 80 9085

4.5oz Nomex® IIIA (CJS15)

ATPV SIZE GROUP

4.8 cal/cm2 A 00 25 50 75 80 90

Lay down collar, six-pockets, bar-tacked reinforcements at stress points, sewn bi-swing back, two-way Nomex® brass break-away zipper, elastic waist inserts, hemmed sleeve with snap closure.

00 25 75

1HRC

2HRC

2HRC

1HRC

2HRC

2HRC

00 25 50 75 80 9085


8

Un

lined

Bib

Ove

rall

Unlined Bib Overall

9oz Indura® (BO16)

ATPV SIZE GROUP

11.5 cal/m2 A

6oz Nomex® IIIA (BO14)

ATPV SIZE GROUP

5.7 cal/cm2 A

Two front side pockets, two reinforced rear pockets, snaps on pass through pockets, sewn with Nomex® thread, bar tacked reinforcements and double needle stitching, non conductive closure on shoulder straps, elastic waistband, bar tacked reinforcements, three front chest pockets.

00

00

25

25 75

1HRC

2HRC


9

Lab Coat

Three Pocket Lab Coat

9oz Indura® (LAB16)

ATPV SIZE GROUP

11.5 cal/m2 A

6oz Nomex® IIIA (LAB14)

ATPV SIZE GROUP

5.7 cal/cm2 A

Two large front pockets, left chest pocket with pencil slot, lapel style front, 42” length, finished dress cuffs with snap closure, bar tacked reinforcements, sewn throughout with Nomex® thread.

00

00

25

25

75

1HRC

2HRC


10

Trou

sers

Relaxed Fit Denim Jean

Carpenter Pant

12oz Indura® Relaxed Fit (RXDJ37)

ATPV SIZE GROUP

14.4 cal/cm2 B

14oz Indura® Relaxed Fit (RXDJ34)

HRC 2 ATPV SIZE GROUP

18.3cal/cm2 B

Made for comfort and ease, five-pocket style-sewn throughout with Nomex® thread, Nomex® brass zipper, one-piece waist band, bar-tacked reinforcements.

11oz Carpenter Work Pant (CARPNT25)

ATPV SIZE GROUP

12.7cal/cm2 B

14oz Carpenter Work Pant (CARPNT34)

ATPV SIZE GROUP

18.3 cal/cm2 B

Built for extra comfort and flexibility, several utility pockets, including hammer loop and tool pocket, Nomex® zipper, reinforced front and rear pockets, with a generous cut for work boots. Also available in 14oz denim.

45

20

20

20

2HRC

2HRC

2HRC

2HRC


11

Trousers

Flat Front Work Pant

Jean Style Work Pant

9oz Ultra Soft® (PNT30)

ATPV SIZE GROUP

12.4 cal/m2 B

6oz Nomex® IIIA (PNT14)

ATPV SIZE GROUP

5.7 cal/cm2 B

9oz Indura® (PNT16)

ATPV SIZE GROUP

11.5 cal/m2 B

Flat front design, button-closure, two side angled front pockets, tworear inset pockets, Nomex® brass zipper.

9oz Ultra Soft® (JPNT30)

ATPV SIZE GROUP

12.4 cal/m2 B

6oz Nomex® IIIA (JPNT14)

ATPV SIZE GROUP

5.7 cal/cm2 B

9oz Indura® (JPNT16)

ATPV SIZE GROUP

11.5 cal/m2 B

Styled after our popular relaxed fit jean for ease and comfort, one-piece waistband with button closure, five jean-style pockets

00

00

00

25

25

25

00

00

00

25

25

25

1HRC

2HRC

2HRC

1HRC

2HRC

2HRC


12

Cargo Work Pant9oz Ultra Soft® (CRG3025)

ATPV SIZE GROUP

12.4 cal/m2 B

6oz Nomex® IIIA (CRG1425)

ATPV SIZE GROUP

5.7 cal/cm2 B

Flat front design, relaxed fit, two big cargo pockets with flap closure, Nomex® brass zipper, Velcro adjustable waist band and ankles.

25

25

Trou

sers

1HRC

2HRC


13

Shirts

Work Shirt

Industrial Work Shirt

7oz Ultra Soft® (WSHRT32)

ATPV SIZE GROUP

8.7 cal/m2 C

7oz Indura® (WSHRT07)

ATPV SIZE GROUP

7.7 cal/m2 C

4.5oz Nomex® IIIA (WSHRT15)

ATPV SIZE GROUP

4.8 cal/cm2 C

Sewn bi-swing back, button front closure, sewn with Nomex® thread, pencil slot on chest pocket, bar tacked reinforcements, finished cuffs, two chest pockets with button flaps, pin-point collar. Also available with snaps.

7oz Ultra Soft® (ISHRT32)


8.7 cal/m2 C

7oz Indura® (ISHRT07)


7.7 cal/m2 C

Button front closure, sewn with Nomex® thread, bar tacked reinforcements, finished cuffs, two button closure chest pockets, pin-point collar.

00 25 50 75 80

00 25

25

75

8075

00

00

25

25

1HRC

1HRC

2HRC

1HRC

2HRC


14

Button Front Henley

Deluxe Dress Shirt

Shir

ts

7oz Ultra Soft® (DSHRT32)

ATPV SIZE GROUP

8.7 cal/m2 C

4.5oz Nomex® IIIA (DSHRT15)

ATPV SIZE GROUP

4.8 cal/cm2 C

5.5oz Ultra Soft® (DSHRT31)

ATPV SIZE GROUP

6.1 cal/cm2 C

Two front chest pockets with button closure, full front placket with button closure, pencil slot in left pocket, button down collar, top stitched finished cuffs.

00 25

25

22

75 80

75

75

1HRC

1HRC

2HRC

Three button placket design, rib-knit cuffs and collar, single left chest pocket.

6.5oz FR Cotton Henley (HENL38)

EBT SIZE GROUP

16.3 cal/cm2 C 2HRC

6.25oz Ultra Soft® (HENL33)

ATPV SIZE GROUP

10.9 cal/m2 C 2HRC

25 50 8075

25 50 8075


15

Cotton Hoodie Sweatshirt

Long Sleeve T-Shirt

Shirts

10.5oz FR Cotton Hoodie (HSW38)

EBT SIZE GROUP

18.5 cal/cm2 C

10.5 oz Fleece, Hood with drawstring closure, one largefront pocket for hand warmth, ribbed knit cuffs and waist.

25 50 802HRC

6.25oz Ultra Soft® (LST33)

ATPV SIZE GROUP

10.9 cal/m2 C

Classic long sleeve t-shirt design, rib knit collar and cuffs.

2HRC

6.5oz FR Cotton Long Sleeve T-Shirt (LST38)

EBT SIZE GROUP

16.3 cal/cm2 C 2HRC

25 50 8075

25 50 8075


16

Out

erw

ear

Bomber Jacket

Work Jacket

11oz Ultra Soft® Duck (BOMB25)

ATPV SIZE GROUP

44.4 cal/m2 C

7oz Ultra Soft® (BOMB32)

ATPV SIZE GROUP

35.8 cal/m2 C

Available in either the 11oz Duck or 7oz outer shell, with 10oz Moda-Quilt® sewn in liner, Nomex® brass zipper with storm flap, finished cuffs with snap closure, pleated action back for ease and movement,two large front patch style pockets with snap closure, full elastic waistband

45

00 253HRC

4HRC

9oz Indura® (JACL16)

ATPV SIZE GROUP

49.8 cal/m2 C

9oz Indura® (JACS16)

ATPV SIZE GROUP

35.6 cal/m2 C

7oz Ultra Soft® (JACS32)

ATPV SIZE GROUP

35.8 cal/m2 C

6oz Nomex® IIIA (JACS14 / JACL14)

SIZE GROUP

C

Available in both a sewn in (JACS) or zip in/out liner (JACL) stand up collar with Velcro closure, Nomex® brass zipper covered by storm flap with snap closures, hemmed sleeve with Velcro adjustments, two hidden side pockets, elastic waistband.

00

00

00

00

25

25

25

25

75

75

75

80

80

80

3HRC

3HRC

3HRC

4HRC


17

Outerw

ear

Parka

Lined Work Vest

7oz Ultra Soft® (VEST3225)

ATPV SIZE GROUP

35.8 cal/m2 C

7oz Ultra Soft outer shell with 10oz Moda-Quilt® sewn in liner, hidden Nomex® brass zipper with snap closures, two front slash cut pockets, Ultra Soft ribbed knit collar.

253HRC

9oz Indura® (IPARKL16)

ATPV SIZE GROUP

49.8 cal/m2 C

9oz Indura® (IPARK16)

ATPV SIZE GROUP

35.6 cal/m2 C

7oz Ultra Soft® (IPARK32)

ATPV SIZE GROUP

35.8 cal/m2 C

6oz Nomex® IIIA (IPARK14 / IPARKL14)

SIZE GROUP

C

Available in both a sewn in (IPARK) or zip in/out liner (IPARKL) stand up collar with Velcro closure, Nomex® brass zipper covered by storm flap with snap closures, hemmed sleeve with Velcro adjustments, two large front Patch pockets with Velcro closure covering two hidden pockets. Both parkas come with snap on hood, with draw string closure.

00

00

25

25

75

75

80

80

90

90

4HRC

3HRC

3HRC

3HRC

00 25 90

00 25 80


18

Deluxe Arctic Parka

Out

erw

ear

9oz Ultra Soft® (HBPARK30)

ATPV SIZE GROUP

40.6 cal/cm2 C

6oz Nomex® IIIA (HBPARK14)

SIZE GROUP

C

Sewn in 10oz Moda-Quilt® insulation, two-way separating heavy duty Nomex® brass zipper, reinforced storm flap with snap closure, two large front pleated pockets with snap closure, fully insulated stand-up collar with Velcro adjustments, hemmed sleeves with Velcro adjustments, pencil pocket on left sleeve.

**Comes standard with detachable snap hood with Velcro adjustable face covering and draw-string closure

00

00

25

25

90

903HRC

4HRC


19

9oz Indura® (IBO16)

ATPV SIZE GROUP

35.6 cal/m2 A

Insulated Bib/Overall

Outerw

ear

9oz Ultra Soft® (IBO30)

ATPV SIZE GROUP

40.6 cal/cm2 A

6oz Nomex® IIIA (IBO14)

SIZE GROUP

A

Same design as our regular bib overall with Moda-Quilt® insulation for cold weather, zippered legs for easy on/off.

00

00

00

25

25

25

3HRC

3HRC

4HRC


20

Out

erw

ear

Arctic Deluxe Insulated Bib

9oz Ultra Soft® (HBIBO30)

ATPV SIZE GROUP

40.6 cal/cm2 C

6oz Nomex® IIIA (HBIBO14)

SIZE GROUP

C

00

00

25

25

90

90

Heavy duty Nomex® Brass Zipper front closure, high bib front for added warmth, two chest pockets, two side slash pockets at hips, two back patch pockets, two-way high leg zippers, reinforced double knees, elastic waist inserts, adjustable elastic non-conductive shoulder straps.

3HRC

4HRC


21

9oz Indura® (IJS16)

ATPV SIZE GROUP

35.6 cal/m2 A

Outerw

ear

Insulated Coverall

7oz Ultra Soft® (IJS32)

ATPV SIZE GROUP

35.8 cal/m2 A

6oz Nomex® IIIA (IJS14)

SIZE GROUP

A

Our premier insulated coverall, permanently lined Moda-Quilt®

insulation, two large front chest pockets, sewn with Nomex® thread, lay down collar, finished cuffs with snap closure, two-way high leg zippers.

00

00

25

25

00 25 50 75 80

3HRC

3HRC

3HRC


22

Alpha Size Chest Size Reg Inseam Short Tall

S 34-36 30 28.5 31.5

M 38-40 30 28.5 31.5

L 42-44 30 28.5 31.5

XL 46-48 30 28.5 31.5

2XL 50-52 30 28.5 31.5

3XL 54-56 30 28.5 31.5

4XL 58-60 30 28.5 31.5

5XL 62-64 30 28.5 31.5

Size Chart A

Waist Sizes Inseam

28 29 30 32 33 34 Up to 34”

35 36 38 40 42 44 46 48 50 52 54 Up to 36”

Size Chart B

Alpha Size Neck Sleeve Chest

SST

14-14.514-14.5

33.535

34-3634-36

MMT

15-15.515-15.5

3435.5

38-4038-40

LLT

16-16.516-16.5

34.536

42-4442-44

XLXLT

17-17.517-17.5

3536.5

46-4846-48

2XL2XLT

18-18.518-18.5

35.537

50-5250-52

3XL3XLT

19-19.519-19.5

3637.5

54-5654-56

4XL4XLT

20-20.520-20.5

36.538

58-6058-60

5XL5XLT

21-21.521-21.5

3738.5

62-6462-64

Size Chart C

CHEST

WAIST

HIPS

SLEEVE

INSEAM

Chest: Measurement should be taken around the fullest part of the chest, just under the arms and across the shoulder blades.

Waist: Measure around waist (not pulling tightly) at the height you prefer to wear the waistband.

Inseam: Measure from the crotch to the bottom.

Sleeve: With the arms hangingdown by the side, measure from the center of the back, across the shoulder, down the outside of the arm to the bottom of the wrist.

Ch

arts


07 7oz 100% Cotton Indura®

12 PBI Kevlar Blend

14 6 oz Nomex® IIIA

15 4.5oz Nomex® IIIA

16 9oz 100% Cotton Indura®

25 11oz Indura Ultra Soft® Duck

30 9oz Indura® Ultra Soft®

31 5.5oz Indura® Ultra Soft®

32 7oz Indura® Ultra Soft®

33 6oz Ultra Soft® knit

34 14oz Indura® Denim

37 14oz 100% Indura® Denim

38 6.5oz interlock cotton knit

Fabrics

23

Product Codes Colors

00 Royal Blue

20 Denim

22 Chambray

25 Navy

45 Duck

50 Orange

61 Light Blue

75 Khaki

80 Gray

85 Spruce Green

90 Red

95 Yellow

70 Black

JS3225

JS Deluxe Grade Coverall

32 7oz Indura Ultra Soft® Fabric

25 Navy Blue Color Fabric

BO Unlined Bib Overall

BOMB Bomber Jacket

CARPNT Carpenter Pant

CJS Contractor Coverall

CRG Cargo Pant

DSHRT Deluxe Dress Shirt

HBHOOD Insulated Hood for HBPARK

HBIBO Arctic Deluxe Bib Overall

HBPARK Arctic Deluxe Parka

HENL Three Button Henley

HSW Cotton Hoodie Sweatshirt

IBO Insulated Bib Overall

IHOOD Insulated hood for IPARK

IJS Insulated Coverall

IPARK Parka

IPARL Zip in/out liner Parka

ISHRT Industrial Work Shirt

JACL Zip in/out liner Work Jacket

JACS Work Jacket

JPNT Jean Style Work Pant

JS Work Coverall

JSZP Oil Field Coverall

LAB Lab Coat

LST Long Sleeve T-Shirt

PNT Flat Front Work Pant

RXDJ Relaxed Fit Denim Jean

SPJS Deluxe Coverall

VEST Zipper front Vest

WSHRT Work Shirt

Styles & Colors


24

Saf-Tech Inc., offers several options for personal customization of any FR garment. We pride ourselves as the most established versatile customized FR manufacturer in the country. With countless options available, our design experts can create fully mocked garments, complete with several different styles of reflective tape; design, produce and sew external patches as well as direct embroidery. Additional Products, Fabrics and Colors are available for purchase.

Customization options may include:Reflective Tape, Tool Pockets, Radio Mic Clips, Pencil Pockets, Cell Phone Pockets, Cargo and Zipper Pockets, Velcro, Embroidery, Silk Screen and Patches.

Reflective Tape

Reflective Tape

Logo Patch

Embroidery

Embroidery

Sewn Patch

Customization


MADE IN THE U.S.A.

WORKMANSHIP

“Our garments are sold throughout North America, solely through our distribution partnerships.

We believe this is the most effective way to achieve consistent growth and unparalleled service; while

staying true to our commitment as being a leading flame-resistant clothing manufacturer.

Saf-Tech is dedicated to being the best FR clothing manufacturer in the marketplace by utilizing years of

experience in the safety industry and in the apparel manufacturing sector. We will continue to take the high

ground in every situation, and will not cut corners when it comes to our reputation in the marketplace.”

Steve McCroryPresident

Saf-Tech is known for the quality, versatility and consistency expected from a protective apparel manufacturer. Our garment production experts have an average of twenty plus years experience in the design and construction of superior Flame-Resistant work wear.

We proudly stand behind every piece we manufacture. Saf-Tech is committed to a 100% satisfaction guaranteed policy. If there is ever a problem with the construction or durability of our garments we will gladly replace it under normal wearing conditions, within the first 12 months.

POLICIES

STANDARD TERMS AND CONDITIONS OF SALE - Please refer to our website at www.saftechinc.com for more information on standard terms and conditions, or contact us at: 1-800-388-6308

RETURNS and EXCHANGES - Refer to the current pricing guideline, visit our website at www.saftechinc.com,or contact us at: 1-800-388-6308


Look for the American Flag next to each of our productsthat are available to be made in the U.S.A.

“We know what matters most to those who are on the job everyday.”

Saf-Tech Inc., is a leading innovator in the flame resistant work wear industry. With over 30 years of manufacturing experience on our side, we know what matters most to those who are on the job every day. Headquartered in Houston, TX where the need for protective apparel began, we constantly stay ahead of the curve in an industry that continuously evolves. Utilizing state of the art technology, and

employing the best manufacturing professionals available; we’re ready for the unexpected.

We pride ourselves on delivering nothing less than the best in every piece we manufacture. It’sspelled out in three simple words: Quality . Service . Excellence.



SAF-TECH, Inc.12440 Highway 3

Houston, TX 77598


Quality . Service . Excellence .

CATALOG


Documents

Saf-Tech catalog