TECHNICAL SPECIFICATIONS

PERFORMANCE PARAMETERS PHYSICAL PROPERTIES

S15Product Group: Multipurpose Stage System Type: Two-way Full Range

• Coaxial Design for seamless coverage• Easy Grip Handles and Integrated Pole Mount• Multiple Stage Monitor Cuts• Low Distortion Touring Class Components• Switchable Bi-Amp and Passive Amplification• Flush Mount Wrap-Around Grill• Additional Side Mounted NL4 Connectors

FEATURES AND ADVANCES

The enclosure is constructed of 18mm 13-ply void-free birch plywood and is coated with a weather and wear resistant ProCoat™ polyurea hybrid finish. Loudspeaker components are protected by a perforated steel grill lined with acoustically transparent foam. The grill and rigging components are weather protected with a heat cured epoxy powder coat finish.

CONSTRUCTIONAPPLICATIONS

• Live Sound• Auditoriums• Sports Venues

• Portable Sound Reinforcement• Club Sound Systems• Performing Arts Centers• Houses of Worship

System Type

Frequency Response-10dB

+/- 3dB

Sensitivity Passive

LFHF

Maximum SPLPassive

LFHF

Crossover Data

129dB / 135dB 129dB / 135dB 129dB / 135dB

50Hz - 20kHz60Hz - 18kHz

98dB @ 2.83V 1 m 98dB @ 2.83V 1 m 107dB @ 4.0V 1 m

1200Hz @ 24dB per octave

70° x 55°, 2-Way Coax, Full Range

(cont. / peak)

Weight

Dimensionsinches

centimeters

Enclosure Material

Suspension

Finish

Transducers

Connectors

Compatible Array Frames(for building clusters)

Compatible U-Brackets

(for deploying individually)

14.1 h x 22.3 w x 20.0 d 35.8 h x 56.6 w x 50.8 d

58lbs / 26.3kgs

18mm 13 ply Birch Laminate

Procoat™ Polyurea-Hybrid Weatherproofing (Black is standard, White and Custom Colors Available)

(8) 3/8-16 reinforced hang points (3) U-Bracket mounting locations(3) Monitor Angles 30°, 35° and 75° (1) Pole Mount location

(4) NL4 - (2) Jackpanel, (1) Left, (1) Right

N/A

S15HU Horizontal U-Bracket

(1) 15” LF Transducer(1) 3.0" Diaphragm, 1.4" Exit Compression Driver

PRODUCT DESCRIPTIONThe S15 is a two-way, full range, multipurpose stage monitor featuring a coaxial 15” loudspeaker with 1.4” exit compression driver mounted to a proprietary 70° x 55° waveguide. The coupling of the cone loudspeaker and high frequency waveguide has been specially engineered to produce a rich vocal presence with a nearly flat response from 60Hz – 18kHz. The S15 can be powered in either a bi-amplified or passive mode selectable from a jack panel switch. To simplify stage cable layout, an additional two NL4 connectors are available on the right and left side of the enclosure. Each S-series coaxial product has a versatile rigging system, a 30°, 35° and 75° stage monitor cut, and pole mount.

The McCauley Sound S series is a family of full bandwidth multipurpose loudspeakers engineered specifically for professional touring, staging and commercial applications. Each loudspeaker enclosure is optimized for superior sound quality and power handling while maintaining a very small footprint and low stage profile. Flush mounted, wrap-around grills are used on all S series products to reduce cabinet reflections. Each full range product offers switchable bi-amp and passive modes, a pole mount and various stage monitor cuts. Two sub-woofer systems, with integrated pole mounts, are available for applications which demand increased low frequency.

(AES / Program / Peak)1000W / 2000W / 4000W @ 8Ω900W / 1800W / 3600W @ 8Ω75W / 150W/ 300W @ 16Ω

Power Handling Passive

LF HF

DIMENSIONAL ILLUSTRATIONS

ARCHITECTS AND ENGINEERS SPECIFICATIONSThe two-way full range loudspeaker shall incorporate a coaxial driver with a 4” voice coil, 15” diameter LF transducer and one 1.4” exit, 3” diaphragm HF compression driver.

The high frequency transducer shall be mounted to a true constant directivity acoustic waveguide with a nominal 70° H x 55° V coverage pattern.

The low frequency transducer shall be mounted in an optimally vented enclosure tuned for a flat low frequency response with -3dB point at 60Hz.

The processed system frequency response shall vary no more than ±3 dB from 60 Hz to 18 kHz measured on axis. The low frequency transducer shall produce a Sound Pressure Level (SPL) of 98 dBSPL at a distance of 1 meter with an electrical input of 2.83V, and shall be capable of producing a maximum peak output of 135 dBSPL on axis at 1 meter. The high frequency transducer shall produce an SPL of 107 dBSPL on axis at 1 meter with an electrical input of 4V, and shall be capable of producing a maximum peak output of 135 dBSPL on axis at 1 meter.

The low frequency transducer shall handle up to 900 W of amplifier power (per AES Standard AES2-1984-r2003) and shall have a nominal impedance of 8 Ω. The high frequency transducer shall handle 75 W of amplifier power (per AES Standard AES2-1984-r2003) and shall have a nominal impedance of 16 Ω.

The loudspeaker enclosure shall have a maximum weight of 58.0 lbs. (26.3 kg) and shall measure 14.1 in. (358.14mm) in height at the back, 22.3 in. (566.42mm) in width, and 20.0 in. (508.0mm) in depth from front to back. The enclosure shall have angled sides for use as a stage monitor that shall be 30°, 35° and 75° as measured from the baffle board. The enclosure shall be constructed of 18mm 13-ply void-free birch plywood and shall have a weather and wear resistant ProCoat™ polyuria hybrid finish.

Components in the front of the enclosure shall be protected by a grill made from perforated steel that is coated with heat cured epoxy powder, and lined with acoustically transparent foam.

Electrical input connectors shall be four, 30 A, 250 V rated, Neutrik NL4 connectors wired in parallel. There shall be two parallel connectors on the rear jack panel and a parallel connector on the left and right sides on the enclosure. Pins 1+, 1- shall be wired to the LF transducers, while pins 2+, 2- shall be wired to the HF transducers. Parallel pass-through connections between NL4 connectors shall be made with 12 AWG wire.

The two-way full range loudspeaker shall be the McCauley Sound S15.

22.30566.42

14.10358.14 35.00°

75.00°30.00°

30.00°

20.00508