Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
S100
LUNACHASSIS
SIDE WINDOW
PSU SHROUD
RADIATOR SUPPORT
USB 3.0
SPECIFICATIONS• Model: G1• Case type: Middle tower ATX• Chassis size (LxWxH): 400x190x446• Weight: 4.3kg• Drive Bays: ODD Bay x 1
3.5” HDD x 2, 2.5” SSD x 2• Acrylic side: Acrylic left• I/O Ports: Headphones x 1, Mic x 1
USB 2.0 x 2, USB 3.0 x1, TF/SD card
SPECIFICATIONS• Expansion card slots: 7 slots• Motherboard compatibility:
ATX/M-ATX/Mini-ITX• Power Supply compatibility:
Standard ATX/ATX12V• PCI/AGP card compatibility: L = 350mm• CPU cooler compatibility: H = 153mm• PSU compatibility: L = 200mm
3.5” / 2.5” DEVICES INSTALLATIONHow to Install 3.5“ HDD
• Fix 3.5” HDD into the 3.5” converter bracket.
• Slide the bracket back to the 3.5” drive bay and lock it.
How to Install 2.5“ SSD
• Use the screw to fix 2.5” SSD on the tray.
• Then mount it on the 2.5’’ bay area.
INSTALL POWER SUPPLY• Use 4 pcs 6x6 hexagon screw to fix the power
supply.
INSTALL MAINBOARD• Lay down the case.
• Align the stand-off holes of the mainboard with the mainboard tray and screw in the stand-offs.
• Make sure the holes on the mainboard and chassis line up properly before securing the screws.
INSTALL PCI• Take off the PCI slot and insert the PCI device. Put back the PCI slot and fasten the screw.
ODD• Pull the CD cover and fix CD-ROM.
FAN/RADIATORCooling 120mmFront 2 x (optional)Top 2 x (optional)Rear 1 x (optional)
Liquid cooling (radiator thickness: up to 32mm) 120mm 240mmFront (optional)Top (optional)Rear (optional)
HD Audio connection
AC’97 Audio connection
USB 2.0 connector
USB 3.0 connection
AUD_GND
PRESENCE#
SENSE1_RETURN
SENCE2_RETURN
PORT1L
PORT1R
PORT2R
SENSE_SEND
PORT2L
KEY
AUD_GND
KEY
N/C
MIC
MIC_BIAS
FP_OUT_R
FP_OUT_L
N/C
FP_RET_R
FP_RET_L#6-32 screw for HDD and PSUM3 screw for SSD and Mainboard screw for HHDStand-off for mainboardCabletie for cable management
CABLE CONNECTION GUIDE
ACCESSORY KIT
Imported by Svive, Østre Kullerød 4, N-3241 Sandefjord, Norway Made in China www.svivelife.com