MONTHLY OFFERS AND NEWS

1

AUG/SEPT EDITION / VALID:31 /09/2016CONNECTWITH US

MONTHLY OFFERS AND NEWS

2

6-piece Impact E-Type & 12-point Socket Set; 3/4”

• Suitable for impact wrenches, length 110 mm• 6-piece set includes E18-20-22-24 as well as• 17 and 19 mm 12-point sockets; additional sizes available• (see table)• Fits truck cylinder head screws, • e.g. MB 300-400-420-500-900;• MAN M 2000, F90, F8, D20, D25, D28

5250-BGS

+VAT

ONLY

£62.99

Groove Nut Socket; MB Atego; 80 - 95 mm• Suitable for Mercedes Benz Atego rear axle, • Vitaro 814, MAN, etc.• Made to DIN 3121 / ISO 1174• High accuracy• Extremely robust execution• Suitable for high tightening and loosening torque• Inner diameter: 80 mm• Outer diameter: 95 mm• Locating tube diameter: 49 mm• Height: 185 mm• Stud diameter: 87 mm• Stud: 6 pcs.• Stud width: 10 mm• Weight: 2.6 kg

8269-BGS

+VAT

ONLY

£104.95

Groove Nut Socket; MB Actros; 105 - 125 mm• Suitable for Mercedes Benz Atego rear axle, • Vitaro 814, MAN, etc.• Made to DIN 3121 / ISO 1174• High accuracy• Extremely robust execution• Suitable for high tightening and loosening torque• Inner diameter: 80 mm• Outer diameter: 95 mm• Locating tube diameter: 49 mm• Height: 185 mm• Stud diameter: 87 mm

8268-BGS

+VAT

ONLY

£104.95

Truck Socket Tool; 8 points; 100 mm; SCANIA

• Suitable for SCANIA rear axles nut• Size: 100 mm• 8-pt.• 3/4” drive• For professional truck repair

5417-BGS

+VAT

ONLY

£95.95

Truck Socket Tool; Rear Wheel; 111 mm; BPW 12t

• Suitable for BPW 12t axle nuts • 111mm Socket• 8-pt• 41 mm hex drive• For professional truck repair

5410-BGS

+VAT

ONLY

£95.95

Truck Socket Tool; 8 points; 115 mm; Volvo

• Suitable for Volvo axle nuts and dust caps• 115 mm• 8-pt.• 3/4” drive• For professional truck repair

5416-BGS

+VAT

ONLY

£95.95

Torque Multiplier

• For loosening stuck wheel nut sockets on trucks and vans• Maximum torque 3200 Nm• Gear ratio 1:56• For 1” sockets

1230-1-BGS

+VAT

ONLY

£85.99

HGV TOOLS

MUST HAVE ITEM

MONTHLY OFFERS AND NEWS

3

Vacuum / Pressure Pump Set

• Suitable for checking pressure and vacuum systems• Like boost pressure, vacuum solenoid valves,• Tank vents, map sensors, etc.• Also suitable for brake bleeding• 63.5 Mm pressure / vacuum gauge• Pressure indicator range: +0 to +3 bar• Vacuum indicator range: -0 to -1 bar• Max. Vacuum: -0.7 Bar• Max. Pressure: 3 bar

8038-BGS

+VAT

ONLY

£59.99Oil Drain Tool For VAG• Allows for a professional and clean change of the oil filter. • For use on: Golf Jetta, Pollo Passat, A3, A4, A5, Q5 etc.

1110-WW

+VAT

ONLY

£12.99

Testing Tool For Dual Mass Flywheel

• Suitable for testing of free-play angle and the • Clearance on dual mass flywheel (dmf)• A checking of the flywheel is recommend • Because a worn or defective dmf can • Damage the new clutch• Test can be performed directly on the vehicles• If the clutch has been removed• Includes: 2 Different claws for locking the flywheel• Angular disc with holder• Dial indicator with holder• Assembly / measuring bolt• Twist lever

8681-BGSTie Rod Spanner 4-Link Suspension On VAG Models

• For adjusting the toe-in quickly & precisely• This tool prevents the rubber connection from damage with its special bridged design.• Cost and time effective • Application: Audi A4 from `94, A6 from `00, A8 from `02, Seat Exeo from `10• Can also be used on many other VAG Group vehicles. • The only tool that will fit perfectly to the tie-rod

4194-WW

+VAT

ONLY

£41.95

VAG Pump Injector Puller

• Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. • Also for engines with Pump-injector units• Should be used as OEM T10133 and T10163. • Included for dismantling FSI injectors(T10133/1)Puller claw for dismantling FSI injectors T10133/2Sliding hammer T10133/3• Cone for mounting-the combustion chamber rings (T10133/5• 3 calibration-tools for mounting the combustion chamber rings T10133/6,T10133/7,T10133/8• Built-in pin for mounting the FSI injectors T10133/9• Extractor for dismantling pump-injector units

1047-WW

+VAT

ONLY

£84.95

MUST HAVE ITEM

MUST HAVE ITEM

SPECIAL PRICE

£170

NEWITEM

MONTHLY OFFERS AND NEWS

4

18-Piece Brake Piston Wind Back Kit

• 18-piece comprehensive set for setting back brake pistons• Right and left threaded wind back tool kit• Suitable for many car models• Includes list of matching car models

800015-UTC

HDI Injector Extractor

• Allows for the extraction of Bosch & Siemens HDI injectors• Disassembly of the cylinder head is not necessary• Suitable for use on: PSA 2.0 HDI DW10, DW12 Engines used in• TOYOTA, MAZDA, HYUNDAI, RENAULT

1116-WW

+VAT

ONLY

£68.95

Wishbone Off-Set Lever Bar Pat*

• The design of this tool allows you to push down on the wishbone and other suspension parts during the disassembly of the drive shaft when replacing the wheel bearing.

1128-WW

+VAT

ONLY

£69.99

Tyre Inflating Device

• To inflate push chunk onto valve. Fully depress lever and then release lever to display pressure• To deflate depress lever half way to release air, then release lever to display pressure

801-UTC

+VAT

ONLY

£29.99

Common Rail Diesel Injector Repair Sockets

• Must have when working on Common Rail engines• This kit includes special tools to remove the injectors internal fixings. • Includes: • 3 x injector ball valve lapping tools• 10 x 7.6 mm hex bit • Denso CR injector valve seat removal tool• 8 side socket for Bosch Common Rail engines • Internal fixing removal tool for Common Rail injectors • Suitable for use on Bosch, Denso and Siemens injectors

4197-WW

+VAT

ONLY

£49.99

Inter Link Coil Spring Compressor• Universal spring compressor for wishbone/multi-link suspension with angled jaws• Makes it easier ,safer and more convenient to position the tool correctly inside the spring• Prevents overload and improves safely• Handles 95% of all cars with wishbone/multi-link suspension rear example • VW Touran, Citroen C3,Skoda Octavia, Peugeot 107

810008-UTC

UNIVERSAL

Low Profile Oil Filter Sockets

• For removing oil filters• Six sided for superior grip• CRV steel construction• Sizes:24mm,27mm,• 32mm,36mm,38mm

802-UTC

+VAT

ONLY

£28.95

MUST HAVE ITEM

MUST HAVE ITEM

SPECIAL PRICE

£135

SPECIAL PRICE

£30

MONTHLY OFFERS AND NEWS

5

Wheel Bearing Removal & Installing Kit

• Reduce the chance of damage to hub and bearing• Suitable for removing and installing large industrial bearing• Drift Sizes ∅55,59,63,66.5,70,71.5,73,73.5,75,77.5,81.5,83.5,88.5 mm• Sleeve∅External:76,86,92,101 mm• Hub screw length:210mm• Hub screw drive:32,38mm

800061-UTC

+VAT

ONLY

£85.95

Swivel Head Oil Filter Pliers 805-UTC

+VAT

ONLY

£14.00

• Be inclined up to 90°in both directions• For easy removal of oil and fuel filters• Ideal for loosening filters in hard-to-reach areas• Swivel head oil filter pliers • Dimensions 57mm to 120mm• Jaws adjust in 4 positions every 45°

Aluminium LED Light

• Aluminium housing • 9 Ultra bright led • With clip • Magnet at the swivel clip • Dimensions: 158 x 22 x 25 mm • Battery: 1.5V AAA 3 pieces

8493-BGS

+VAT

ONLY

£9.99

Colour Borescope

• 5.9 Mm super slim camera head • 8.9 Cm (3.5 “) Colour LCD display • 100 Cm flexible goose-neck • Camera probe with 3 leds for lighting • Display resolution: 320 x 240 pixels • Resolution camera: 640 x 480 pixels • Fps: real-time display (30 fbs)

63245-BGS

13-piece Tool Set for Tire Pressure Sensors• Allows professional installing of tire pressure sensors• Includes the following tools:• 1X 1/4” torque wrench, 1 - 6 nm,accuracy: +/- 3%• 1X universal joint, 6,3 (1/4)• 3X 1/4” bit sockets, t-star, t10-t15-t20• 1X 1/4” extension bar, 100 mm• 2X 1/4“ 6-pt. “Pro torque®” sockets, 11 and 12 mm• 1X torque wrench for sensors• 1X valve torque tool• 1X valve thread cutter• 1X combination spanner, 10 mm• 1X parallel pin punch

8919-BGS

MUST HAVE ITEM

MUST HAVE ITEM

SPECIAL PRICE

£135

SPECIAL PRICE

£170

NEWITEM

NEWITEM

MONTHLY OFFERS AND NEWS

6

5-Piece Ratchet Brake Pipe Spanners

• Brake lines, fuel lines etc. can be awkward and hard to reach. • This set allows fast and easy access. • Fine 72 tooth ratchet. • Sizes: 8,9,10,11,12 mm

1188-WW

+VAT

ONLY

£69.99

Combination Spanner Set; 6-32 mm; DIN 3113A

• Hardened, chrome plated• Polished jaws• 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-30-32 mm• In tetron wallet

1196-BGS

+VAT

ONLY

£45.00

1/4”dr Socket & Bit Set• Must have set. • Contains all common sizes and profiles required when working in the automotive industry • 1/4” drive• Super lock sockets: 4 - 14 mm

4172-WW

+VAT

ONLY

£28.95

+VAT

ONLY

£14.99

Socket Assortment Sets; Spline/T-star/Hex

Item No. Profile Drive Size

5187-WW Spline 3/8” M4, 5, 6, 7, 8, 9, 10

5188-WW Torx 3/8” T25, 30, 40, 45, 50, 55, 60

5189-WW Hex (6pt) 3/8” 3, 4, 5, 6, 7, 8, 10 mm

34-piece T STAR Bit / Socket Set

• Satin chrome plated• 11 bit-sockets T 10-T60 not tamper-proof• 10 bits (5/16“ drive) T10-T55 tamper-proof• 1 bit-holder• 12 E-Type sockets E 4-E 20• All sockets spiral-knurled and with ball bearing • For secure socket holding

1658-BGS

+VAT

ONLY

£32.95

Socket Bit Sets

Item No. Profile Size

1212-WW Hex (6pt) 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 mm

1213-WW Torx T8, 10, 15, 20, 25, 27, 30, 45, 50, 55, 60

• Made from high quality hardened steel to increase longevity.

+VAT

ONLY

£19.99

Each

Each

+VAT

ONLY

1/4”dr Bit Socket Set Torx,Hex,Spline,PZ,SL,PH

• Sizes Included:• H3,H4,H5,H6,H7,H8 • PH1,PH2,PH3• M4,M5,M6,M8,M10, PZ1,PZ2,PZ3,SL7• T10,T15,T20,T25,T27,T30,T40,SL4,SL6.5

4218-WW

£22.95

MONTHLY OFFERS AND NEWS

7

12-piece Pin Driver Set, including Chisel + Punch

• 6 different flat chisels: 14.5 mm x 145 mm to 19 mm x 250 mm• 3 4.5 x 250, 6.5 x 180 and 8 x 250 mm• 1 drift punch 9.7 x 200 mm• 2 punch 150 mm and 200 mm long

1657-BGS

+VAT

ONLY

£27.95

6-piece Centre Punch Set

• Hardened, tips polished, shaft lacquered• Length 150 mm• Sizes: 3-4-5-6-7-8 mm

1656-BGS

6-piece Parallel Pin Punch Set

• 3 - 4 - 5 - 6 - 7 - 8 mm• Hardened, coloured shaft• 150mm length

1651-BGS

8-piece Pin Punch and Chisel Set

• Hardened hexagonal shaft• Pin punches: 3-4-5-6-8 mm• 1 Flat chisel 15mm• 1 Cross-cut chisel 4mm• 1 Centre punch• Length 150 mm

1658-BGS

+VAT

ONLY

£14.95

+VAT

ONLY

£16.95

+VAT

ONLY

£14.95

Heavy Duty Water Pump Plier 20”Inch

• Double pvc dipped handle• Precision polished• Groove joints• Adjustable head

800003-UTC

+VAT

ONLY

£28.50

Waterpump Pliers with Box-Joint

Item No. Size Aperture Cost

7510-BGS 175 mm 27 mm £9.99

7511-BGS 240 mm 36 mm £10.99

7512-BGS 300 mm 44 mm £13.99

7513-BGS 400 mm 80 mm £24.99

3-piece Water pump Pliers Set; DIN 5231; Box-Joint

• Professional quality• High quality lacquered black finish • Forged • Hardened• Polished jaws and joint • Blue pvc dipped handles• 175-240-300 Mm• Aperture max. 27-38-44 MM

457-BGS

+VAT

ONLY

£19.99

ALL 4 FOR

£45

MONTHLY OFFERS AND NEWS

8

“Dynamic Wall Drive” Deep Impact Sockets 10-32 mm4162-WW

+VAT

ONLY

£39.99

Sizes10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm1/2” drive The special design of the socket reduce the chance of damaging the socket.

+VAT

ONLY

1/4dr Deep & Shallow Impact Sockets 4-15 mm4147-WW

£28.99

Socket sizes 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm,10mm, 11mm, 12mm, 13mm, 14mm, 15mmPerfect for use in the automotive industry.

Deep E-Torxs Impact Sockets E10-E249101-WW

Socket Sizes E10, E11, E12, E14, E16, E18, E20, E22, E241/2” drive

Extra Long E-Torxs 72Th Ratchet Spanners-Flexi Head

• Sizes:• E6 x E8• E10 x E12• E14 x E18• E20 x E24

1001-WW

+VAT

ONLY

£69.99

72FINE TOOTH

6-Piece Impact Adaptor Set

• Sizes• 1/4” int to 3/8” ex• 3/8” int to 1/4” ex• 3/8” int to 1/2” ex• 1/2” int to 3/8” ex• 1/2” int to 3/4” ex• 3/4” int to 1/2” ex

4116-WW

+VAT

ONLY

£18.95

Each

5-piece 1/2” Manual Impact Wrench Set

• Very robust • Satin chrome plated • With 2 cross and 2 slotted bits. • Useful when working for short periods of time.

710-BGS

+VAT

ONLY

£19.99

HGV-Track Rod End Removal Tool

• Specially designed to remove track rod ends found on HGVs. • Particularly useful when the tapper is separated. • Can be used with an impact wrench and 36 mm socket.• Simple solution to an awkward problem. • Because of the scale of the track rod and the build up of dirt the task can prove tricky. This simple solution allows you to use pneumatic tools to aid in the removal of the track rod saving time and unwanted effort. Must have!!!

4091-WW

NEWITEM

MUST HAVE ITEM

SPECIAL PRICE

£90

+VAT

ONLY

£33.95

1084-WW6-Piece Adaptor Set

MONTHLY OFFERS AND NEWS

9

+VAT

ONLY

3/8”dr Reversible Composite Air Drill + Keyless Chuck

• Lightweight design with noise reduction technology.• Features one handed forward and reverse switch with a variable speed trigger.• Free speed: 1800 rpm • Chuck capacity:10 mm• Spindle capacity:3/8 • Length: 184mm• Weight 1100g• Air consumption:4 cfm• Air inlet: 1/4• Sound level:83dB

2115-WW

£55.00

1/2”DR Composite Impact Wrench 1360NM

• 1/2” Square Drive• Power out put of 1360NM• Comes with Twin Hammer Function

3115-WW

1/2”Dr Impact Wrench 1600NM

• 1/2” Square Drive.• With a Maximum Torque of 1600nm.• Convenient one-handed operation with quick reverse level at trigger for left or right handed user.• TWIN-HAMMER mechanism provides more power and smooth balanced blows.

2114-WW

+VAT

ONLY

£148.95

+VAT

ONLY3”Inch Mini Surface Sander

• Free Speed Position 1 (15000 RPM)• Free Speed Position 2 (10000 RPM)• Rated Power 0.15 kW• Spindle Thread 1/4”• Pad Diameter 75 & 50 mm• Weight 0.45 Kg• Tool Dimensions 125 x 45 x 130mm• Air Consumption 59 l/min• Sound Pressure: 84.9 dBA• Sound Power 95.9dBA• Vibration 3.2 m/s2

3001-WW £34.95

Air Metal Shear

• Precisely Cuts up 18 gauge sheet metal• Precision Hardened gearing increases life of the air shear• Ball bearing mounted motor• Designed for smooth operation• Aluminium Trigger• Cutting capacity:• 1.2mm Steel• 1.6mm Aluminium• The head design allows for contour cuts and straight cuts

3007-WW

Air Nibbler

• Fingertip operated throttle for feathering control• Equipped with quick connectors• Cutting capacity:• 1.4mm on Steel• 1.8mm on Aluminium

3006-WW

+VAT

ONLY

£34.95+VAT

ONLY

£34.95

18 Volt Compact Impact Wrench Lion Battery 540 NM

• High capacity 18V lithium battery for long running time.• High efficiency 2-brush, motor for maximum durability.• The 2116-WW can remove 380 bolts tightened at• 200 ft. lb. on one battery charge• Cold-formed, alloy steel anvil for maximum durability.• Provides an incredibly powerful 540-NMMore• Torque and greater mobility that you’ve ever experienced in a1/2 Mini Impact Wrench.• The digital fuel gauge and micro-controller in the lithium battery monitors temperature and amperage to prevent motor overheating.• Ergonomically designed to allows continued use without fatigue.

2116-WW

18 VOLTS

SPECIAL PRICE

£99

SPECIAL PRICE

£220

MONTHLY OFFERS AND NEWS

10

Mechanics Work Gloves

ITEM NO. SIZES PRICE 35102-WW M £7.5035100-WW L £7.50 35101-WW XL £7.50

Sizes Available

Mechanics Working Kneel Mat With EVA Technology & LED Lighting

• Made from EVA oil and acid resistant foam. • Fitted with super bright LED strips. • Ideal for working under vehi-cles where light can be an issue.• Dimensions: 460x270x30 mm

4046-WW

+VAT

ONLY

£28.99 NEWITEM

Flexible Hose Clamp Pliers Clip Type

• Long reach thanks to the cable• For replacing fuel oil and water hose clips• Ideal for confined spaces• Hose clamp range: 18-54mm• 630mm wire flex

600022-WW

+VAT

ONLY

£39.99

Flexible Hose Clamp Pliers

• Designed for removal and locking of clamps in the open position.• Can be used on plastic, metal self-tightening hose clamps with diameters of 18 to 54 mm

600021-WW

+VAT

ONLY

£29.99

Long Reach Hose Clamp Pliers VAG

• Suitable for new style hose clamps, as built into VAG 2.0 TDI engine• Also suitable for tight spaces because of bowden cable operation• Hose clamp has a locking function and release button

800042-UTC

+VAT

ONLY

£28.99

12-Piece Circlip Pliers Set

• Included• 0º x 1 mm 45º x 1mm 90º x 1mm• 0º x 1.2mm 45º x 1.2mm 90º x 1.2mm• 0º x 1.8mm 45º x 1.8mm 90º x 1.8mm• 0º 2.3mm 45º x 2.3mm 90º x 2.3mm• Coated non-slip ergonomic handles

1079-WW

Universal Oil Filter Wrenches ITEM NO. SIZES PRICE 821-ww 60-80mm 19.99822-ww 80-98mm 26.99823-ww 100-140-mm 38.99

Brake Line Bending Pliers

• Designed to be used on brake systems especially when a 2 handed tool wont fit.• Allows for sharp bends to be created quickly and easily.• Easy access to difficult places.

9102-WW

+VAT

ONLY

£24.99

SPECIAL PRICE

£70

MONTHLY OFFERS AND NEWS

11

12-Piece Universal Puller Set

• Off-pull between 105 - 210 and 265 mm • Suitable for 2- & 3-arm traverses • Internal plug-arms used and puller

4117-WW

2-Piece Universal Oil Funnel Set

• Designed to fit the majority of oil intakes. • The specially designed clamp can be adjusted to fit. • Minimise spilling and mess.• Stable and secure fitting.

4013-WW

+VAT

ONLY

£32.99

Ignition Coil Puller Tool - VAG

• Designed for dismantling of ignition coils, which are mounted directly on the spark plug.• Applications: VW Golf from 2013, Audi A3 from 2013, SEAT Leon from 2013, Skoda Octavia from 2013 fitted with 1.2, 1.4 and 2.0L FSI chain engines.

4032-WW

+VAT

ONLY

£26.99

NEWITEM

Universal Adjustable Bearing Race and Seal Driver

• Durable and tough aluminium construction with rubberised striking tip. • Can be used on seat races, bearing and seals. • Jaw opening range: 18.5 to 89 mm

4203-WW

+VAT

ONLY

£69.95

T-handle Universal Joint Socket Set

• Sliding bar and universal joint• Sizes: 8 - 10 - 11 - 12 - 13 - 14• 15 - 16 - 17 - 18 - 19 mm• Length: 340 mm• T-bar width: 200 mm• In a robust zipper wallet

8880-BGS

MUST HAVE ITEM

SPECIAL PRICE

£70

SPECIAL PRICE

£99

MUST HAVE ITEM

+VAT

ONLY

2-Piece Special Screwdriver Set

• Special profile for loosening cross and • Slotted screws with damaged heads• With striking cap• Hexagon shaft• Length: 195 mm

7952-BGS

£9.99

64-Piece Oil Plug Thread Repair Set

• Included• 4 HSS taps: M13, 15, 17, 20 x 1.5 • 20 x Oil drain plugs / sump plugs made from 45CR• 40 x Aluminium washers / sealing ring

800008-UTC

SPECIAL PRICE

£30

Silent Block Tool For BMW11142-WW

+VAT

ONLY

£120.95

Suitable for installation and removal of rear ball joints and bushes in a variety of BMW models.1 series E81-E873 series E36-E46-E83-E90-E91-E92-E935 series models E60-E616 series E63-E647 series E38-E65-E66-E678 series E31Z4 series E85-E86 Mini Cooper S R53

18-Piece Silent Block Tool For VAG Group

• For the replacement of bushes on wishbone / trailing arms,• Wheel bearing housing, lower wishbone downside / inside• Allows renewing of bushes on the vehicle, when installing• VW Golf 5 Plus / Variant / 4-Motion Year 2005-2012,• Jetta / Syncro Year 2006-2012, • Scirocco / 2009-2012,• Beetle / Year 2012 -, Eos Year 2006-2012

1135-WW

+VAT

ONLY

£120.95

Renault Laguna Silent Block Tool

• Remove & install front mounting bushes in rear sub-frame• Can be used in-situ, with no need to remove the sub-frame from the vehicle

1097-WW

+VAT

ONLY

£49.95

Compact Wheel Bearing Kit: 62,66,72 MM800002-UTC

Limited offers on bushing and bearing kits.

The audio, video, text, images or other material available on this website “the Site” by the Welzh Werkzeug Ltd to you (collectively, the “Content”) is either: protected by third-party rights such as copyright or trademarks (for which Welzh Werkzeug Ltd is permitted to make available to you), is copyright to Welzh Werkzeug Ltd, or are materials which are in the public domain or made available under a Creative Commons licence.

AUTHORISED DISTRIBUTOR:Welzh Werkzeug Ltd

1-6 The Green | Eastriggs | Annan Dumfries and Galloway | Scotland

DG12 6NH

Contact your local dealer for more info.

Tel: 01461 700120 | Fax: 01461 700181E: info@welzhwerkzeug.com

www.welzhwerkzeug.com

• Can be used in situ with the vehicle.• Can be used on 62, 66, 72 mm bearing units. • Applications: Audi A2, VW Lupo, Polo, Fox, SEAT Ibiza, Skoda Fabia• Gen2 bearing are able to work with driven or non driven hubs. • Gen2 bearing kits have been designed to extract bearing with out removing the ABS sensor. • This tool ensures that any load will only be applied to the outer race of the bearing.

PSG Glow Plug Insert Socket Set 6pcs

• Designed for the safe removal of PSG glow plugs.• Can be used on normal glow plugs also.• Supplied with 5 insulating caps. • Special-inner bearings allow safe gripping of the glow-plugs.

4004-WW

+VAT

ONLY

£9.99

MUST HAVE ITEM

MUST HAVE ITEM

Limited Stock Available

+VAT

ONLY

£114.95