Upload
g7552245
View
316
Download
36
Embed Size (px)
DESCRIPTION
Rymsa RF 2015
Citation preview
Since 1974, RYMSA RF has specialized in the implementation of complex broadcast radio and TV antenna systems providing turnkey services for customers on all five continents. Our expertise in this field has been strongly developed over the years leading us to todays market leadership position, with capabilities to manage each project from conceptual design to on-site installation and commissioning.
RYMSA RF has deployed broadcast antenna systems from the Equator to the Arctic Circle, providing reliable service in extreme environmental conditions such as high elevations, strong winds, heavy icing, intense solar radiation, dust from desert and high levels of humidity and salinity.
Customized radiating solutions of high complexity are one of our specialties. Multi-panel or skew panel arrays for large cross-section towers, embedded antenna systems and multi-pattern arrays have all been engineered by RYMSA RF to satisfy the most critical antenna pattern requirements.
Multi-channel service, high-power capability and analogue, analogue-digital or digital signals combinations are common requirements of todays modern broadcaster and RYMSA RF antenna systems have the strongest market reputation in terms of reliability when these needs arise.
BROADCAST ANTENNA SYSTEM SOLUTIONS
1
FILTERS AND CHANNEL COMBINERS FOR RADIO AND TVRYMSA RF has a successful history of supplying multi-channel
combiners to radio and TV broadcasters worldwide. Every possible channel-combining requirement can be achieved with RYMSA RF products, ranging from low power applications to very high power systems including large numbers of channels and very close channel spacing.
Depending on the needs of each site, RYMSA RF can supply different types of combiners such as constant impedance, manifold, star-point or commutating line (stretch-line). As per customer request, patch panel systems can be integrated in our channel combiners.
Our expertise includes the ability to provide emissions mask filters for digital TV signals of any standard and any power level. We offer a complete line of re-tunable channel combiners and mask filters that can be tuned to any channel, even for adjacent channel conditions.
In addition to filters and combiners, we supply great stand-alone components including power combiners and dividers, hybrids, switches and directional couplers and all kind of rigid lines and coaxial accesories.
2
RF DESIGN & ENGINEERING All key parameters of broadcast RF systems, such as radiation patterns, coverage
calculations and RMS and peak power handling are matter of close scrutiny by RYMSA RF engineers. Cutting-edge computer-aided design tools enable us to provide optimum results for a wide variety of technical requirements.
In addition to our in-house proprietary software, we have the best commercial design tools available to guarantee the best performance, including SUPERNEC, CST, FEKO and ICS Telecom. These powerful tools, together with the experience and expertise necessary to use them accurately, guarantee the best possible performance of our products and the best value for the broadcaster.
RYMSA RF is continuously investing in the maintenance and upgrade of in-house test equipment at the manufacturing facilities located in Spain and USA in order to ensure a high level of accuracy in the verification of our designs. All RF components and assemblies designed by RYMSA RF are put through stringent electrical, mechanical and environmental testing in our state-of-the-art facilities that include:
Several far-field antenna ranges and two indoor compact antenna ranges, working from 6 MHz to 40 GHz.
Network analyzers with a full range of calibration kits for all relevant transmission lines types and sizes.
RMS and peak power test sets. Vibration tables. Rain test set. Salt spray corrosion chambers. Temperature and humidity chambers.
The use of these state-of-the-art facilities, in strict accordance with our quality management system endorsed by the DIN EN ISO 9001 Certification, guarantees the highest possible quality of all our products.
TEST FACILITIES
3
TURNKEY PROJECTS RYMSA RF is a recognized global leader in the supply of turnkey solutions involving the entire scope of radiating and passive devices needed at any broadcast transmitting site. Our comprehensive range of antenna systems, channel combiners and other passive elements, as well as our outstanding project engineering resources, enable us to perform complex jobs which quality is ensured by a complete set of in-plant and on-site supervision protocols. The scope of work for the turnkey project is mainly composed of, though not limited to: SCOPE OF SUPPLY Supply of the antenna system, tailored to all
customer requirements and with an optimized coverage.
Design and supply of all the necessary mounting hardware to attach the antenna system to the tower, matching the details of the existing mast.
Design and supply of antenna supporting steelwork such as top-mounted spines and pipes and side-mounted structures, ensuring the proper interface with the existing mast and performing a mechanical analysis of the complete solution.
Supply of the feeder transmission lines, their connectors, accessories and dehydrator.
Supply of any indoor passive item needed from the transmitter outputs to the antenna system input, such as channel combiners, power combiners, filters, patch panels, motorized switches, N+1 switching systems, rigid lines and all types of coaxial accessories.
IN-PLANT ENGINEERING WORK Factory Acceptance Tests, including the measurement
of radiation patterns and the ground test of the complete assembly of any kind of antenna system.
Training courses.
ON-SITE ENGINEERING WORK Surveys. Installation supervision. Project commissioning. Training courses and road shows
LOGISTICS Transportation and insurance of the goods up to
their destination airport or seaport. Shipping documentation for customs clearance.
4
RYMSA RF PRESENCE
Headquarters
Clients
Sales office
RYMSA RF belongs to TRYO Technologies, a Spanish technology group of consolidated companies focused on providing completed solutions to our clients in a wide range of the professional telecommunications and radio frequency applications for broadcast, air traffic control, space, critical communications, scientific and defence.
RYMSA RF- SpainHeadquarters (Manufacturing & sales office)Ctra. Campo Real km 2,10028500 Arganda del Rey. Madrid (Spain)E-mail: [email protected]
RYMSA RF- MexicoSales officeAndrs Bello n10-708Col. Polanco, 11560Mexico DF (Mexico)E-mail: [email protected]
RYMSA RF-SingaporeSales officeE-mail: [email protected]
5
6
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected]:www.rymsarf.com
TABLEOFCONTENTS
TVUHFBandIV&V...................................................................................................................9Antennas..........................................................................................................................................13Filters...............................................................................................................................................19Combiners........................................................................................................................................28Liquidcoolingsystem.......................................................................................................................45
TVVHFBandI&III...................................................................................................................47BandI...............................................................................................................................................50 Antennas.....................................................................................................................................50 Combiners...................................................................................................................................54BandIII.............................................................................................................................................57 Antennas.....................................................................................................................................57 Combiners...................................................................................................................................69
RadioFMBandII&DAB..........................................................................................................73Antennas..........................................................................................................................................76Combiners........................................................................................................................................95
Passivecomponents..............................................................................................................103Powersplitters...............................................................................................................................104Interconectionlines.......................................................................................................................105Connectorsforcoaxialcables........................................................................................................106GasBarriers....................................................................................................................................107Flanged90elbows........................................................................................................................10815/8".............................................................................................................................................10931/8".............................................................................................................................................11141/2".............................................................................................................................................11361/8".............................................................................................................................................11593/16"...........................................................................................................................................117Finematchers................................................................................................................................119Adapters.........................................................................................................................................120Measurementdirectionalcouplers...............................................................................................1223dBhybrids...................................................................................................................................123Coaxialpatchpanels......................................................................................................................124Patchpaneldividers......................................................................................................................125Coaxialswitchdivider....................................................................................................................127Coaxialtransferswitches...............................................................................................................129
TVVH
F
(BAN
DII
II)
RADIO
(FM
BANDI
I)&
DAB
PASSIVEC
OMPO
NEN
TS
TVUH
F
(BAN
DIV
V)
7
8
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
TV UHF ANTENNA AND COMBINING SYSTEMS
(UHF Band IV & V)
RYMSA RF manufactures a broad range of antennas for the transmission of TV signals in UHF band. Antenna systems are currently formed by stacking single radiating elements properly disposed and fed with the adequate phase and amplitude. These unitary radiators can be either directional, as those based on panel solutions, or dipole-style providing omni or quasi-omnidirectional performances. RYMSA RF designs the single antenna elements succeeding in the challenge of displaying the necessary ruggedness minimizing wind load and weight, and ready to remain weatherproof for a long life withstanding any sort of extreme climatic conditions. Moreover, all our radiating elements include a fiberglass radome to prevent their components to a direct contact with environmental agents. This versatility allows using them also individually for low power needs such as relay sites. Power dividers and interconnecting lines (both flexible and rigid), are utilized to build the distribution network which transports the signals from the main transmission line up to each radiating element. The very assorted range of different models of these products manufactured by RYMSA RF ensures the capability of satisfying any possible request, from simple arrays to complex high power antenna systems. The antenna systems can be conceived either to be installed on the site mast element by element, and therefore supplied partially disassembled, or fully assembled in plant with all the elements pre-assembled on a spine or side-mounted or top-mounted pole structures, which also may be fully enclosed in a GRP cylinder and delivered as a unitized integrated product. Examples of the latter are the UHF panel spines and the superturnstile antennas.
RYMSA RF AT15 series are compiling several types of antennas for TV applications within the B-IV/V range.
Panel systems: UHF panel arrays are the most versatile solutions to implement radiation patterns customized to any particular coverage requirement. Ideal for situations involving multichannel needs and tailored patterns. UHF panel systems are frequently delivered as a full integrated antenna. All our panels are broadband operation and available with several input connector size options to achieve any possible power request. In terms of the polarization, several models are available:
Horizontal polarization panels: suitable for the implementation of square, pentagonal and multi-panel arrangements.
Vertical polarization panel: especially suitable for square arrangements.
Elliptical/Circular polarization panels: especially conceived
for assembling antenna systems meeting the new challenges of the market on non-linear polarization, the antenna can be supplied either with a power splitting hybrid neatly integrated on its frame, or with two connectors, one per polarization component.
Superturnstile antennas: there are several versions, all ready for
multichannel applications, and ranging from low to high power handling and from low to high antenna gains.
TV UHF B-IV/V multipanel antenna systems
TV UHF high power superturnstile antenna under factory tests
TVUH
F
(BAN
DIV
V)
9
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
The excellence in quality of the broadcast services strongly depends on the ellimination of the in-band and out-of-band spurious emissions generated by the proccess of amplification at the transmitters. Terrestrial digital TV (DTV) emissions of all the existing standards require to guarantee the spectral channel response by fulfiling the digital TV standard mask requests. This is achieved by the use of filters at the transmitter output. For DTV applications RYMSA RF offers a full range of coaxial (TEM) bandpass filters, FLDV series, composed by 6 or 8 poles, which cover a wide scope of power handling levels. RYMSA RF FLDV filters support channel bandwidths of 6, 7 and 8 MHz, and are tunable to any frequency within the UHF TV band. The use of the inter-cavity feedback technique by crossed couplings allows the compliance of the mask specifications required by DVB-T, ISDB-T and ATSC. This catalog offers a most typical mask response for each digital standard and every RYMSA RF filter model. Any other tuning shape not included is likely to be achieved on demand, do not hesitate to ask us. For high power applications, RYMSA RF FLDV models are supplied with a liquid cooled circuit, which helps dissipate the heat generated in the filter and avoids distortion in the mask response and thermal drift. Cooling system units, ready for use with several number of filters at once are available. However, the maximum power handling of any filter is ultimately limited by the decrease of the breakdown voltage with the altitude of the operating site. The nominal power levels displayed at this catalog are specified for 550m above sea level, thus a derating table is included at the end of this section for evaluating power handling at any other altitude. For very high power needs, RYMSA RF also makes available a range of waveguide dual-mode filters, with similar mask shape characteristics than their coaxial counterparts.
Digital TV scenarios not involving the need of providing both combination features and mask response at once, can make use of channel combiners composed by non-mask filters, as any application still required on analog TV. For those applications RYMSA RF offers a full range of coaxial (TEM) bandpass filters, FL15 series, composed by 3 or 4 poles, which cover a wide scope of power handling levels. RYMSA RF FLDV filters support channel bandwidths of 6, 7 and 8 MHz, and are tunable to any frequency within the UHF TV band. Iris-coupled, comb-line and interdigital are among the available design approaches. Other models such as lowpass, reject (notch type) and harmonic filters are also available. The FL15 series are natural air convention units. RYMSA RF develops the filters with the aid of several in-house and commercial software packages. First pre-serial units are submitted to stringent electrical and thermal tests in order to guarantee the response and stability of the series units.
A channel combiner is a passive RF device devoted to sum on a common output the signals produced from several different sources, keeping a high isolation between them, and minimizing ohmic and return loss. RYMSA RF manufactures channel combiners from low power to very high power applications, and displaying several different construction techniques, which are described at the following pages. These techniques are frequently involving the use of filters, which type and response are key factors of the combiner performances. Depending on the application and requested performances, the channel combiners will include mask filters or non-mask filters. RYMSA RF broadcast catalogue is compiling detailed information of a wide range of the most common standard products related to the field of channel combiners, though RYMSA RF 's capabilities are not limited to them but also extended to provide custom solutions to any possible particular request, either modifying well-proven designs or developing brand new ones.
Mask Filters
Non-mask Filters
Channel Combiners
TVUH
F
(BAN
DIV
V)
10
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
The filters are usually bandpass type, either coaxial (TEM) or waveguide, and their selectivity is the parameter that defines the combiner behaviour in terms of channel spacing. An additional bandpass filter is sometimes used at the WB input of the cell, in order to achieve greater isolation between inputs. Due to their expandable nature by the cascade connection of several cells, constant impedance combiners are the most versatile solution, offering the best performances, as getting the highest isolation and the minimum channel spacing, being the combiner inputs VSWR not very affected by the changes of antenna system VSWR . Generally speaking, almost any complex combining system for digital applications, is implemented using this technique. DTV needs of this type are currently covered by RYMSA RF by using constant impedance combiners as the preferred choice. The use of mask filters to build this type of combiners allows to provide adjacent channel combination by using 6 or 8 poles mask filters, achieving both channel combination features and mask shape characteristics to the signals at once, thus avoiding the use of a single filter at the transmitter outputs. These devices are known as Mask Combiners.
RYMSA RF DPDV constant impedance mask combiner series make good use of the previously described FLDV bandpass filters, and RYMSA RF DP15 constant impedance non-mask combiner series make good use of the previously described FL15 bandpass filters, to offer a very wide portfolio of standardized constant impedance models, ranging from low to high power requirements, and displaying the same kind of outstanding electrical versatility as their constituent filters. This electrical finesse is enhanced by a very compact mechanical design of each constant impedance cell aimed to save room in the transmitting facilities.
Constant Impedance Combiners
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BANDPASS FILTER
NBINPUT
WBINPUT
OUTPUT
BANDPASS FILTER
A constant impedance combiner, also known as balanced combiner or directional filter type, is composed by two identical filters, two 3 dB hybrids and a balancing load (equilibrium load), interconnected as shown in the figure. This single device is also known as diplexer "module" or "cell". Narrowband input (NB) corresponds to the filters resonant frequency, whilst the wideband input (WB) admits any other signal within the working bandwidth, provided it is enough spaced from the resonance.
Star Point Combiners
A star point combiner of N channels is built as the parallel connection of N bandpass filters to a common point where the output is located, each one tuned to one of the desired channel frequencies. The system is able to work provided that at each filter output, all the N-1 remaining filters present an open circuit impedance. This may lead to the use of transmission lines of different lenghts between the filters and the common output. This sort of combiner results in a cost-effective solution, displaying the advantage of room saving and keeping many of the performances related with the use of filters, though without the expandable nature of the constant impedance type. It can be selected mask filters or non-mask filters to build the star-point channel combiner, depending on the applications and radioelectrical parameters requested for the combiners.
OUTPUT
STAR POINT
BANDPASS FILTER
BANDPASS FILTER
BANDPASS FILTER
INPUT 1
INPUT 2
INPUT N
TVUH
F
(BAN
DIV
V)
11
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Environmental conditions
RYMSA RF mask combiners are making use of bandpass filters which power admission depends on the fact of the decrease of the RF voltage breakdown when the altitude increases. The attached derating table has to be used over the nominal power handling levels supplied at the catalog sheets for a proper evaluation of the admission capabilities of all FLDV filters and DPDV channel combiners for each particular need. 20%
30%
40%
50%
60%
70%
80%
90%
100%
0 500 1000 1500 2000 2500 3000 3500 4000 4500
POWER DERATING (%) vs. ALTITUDE ABOVE SEA LEVEL (m)
Manifold Combiners
In a manifold combiner of N channels, N filters are connected in parallel to a common transmission line, which displays one short circuit at one end and the system output at the other end. The overall performances depend on the position of the filters along the transmission line and on the distance to the short circuit. The manifold configuration is a lower cost solution than the constant impedance configuration, displaying the advantage of room saving, and retaining many of the performances related to the use of filters. It is expandable to a higher number of channels, but in a less easy way than constant impedance type, since the length of the transmission line and the filters allocation have to be recalculated. The number of channels able to be implemented is greater than that achieved with the star-point configuration. It can select mask filters or non-mask filters to build the manifold channel combiner, depending on the applications and radioelectrical parameters requested for the combiners.
Stretch Line Combiners
Stretch line combiners, also known as commutating line or loop-style, display a very simple approach built without the use of any filter. So, this solution must be displayed Digital TV scenarios not involving the need of providing mask response, as any application still required on analog TV. The elementary two channels combiner is composed by two 3 dB hybrid couplers and a balancing load, connected as shown at the attached sketch. One of the two transmission lines interconnecting the hybrids contains a loop that supplies the phase shift required to produce the signal additions and cancellations that make the system work. The isolation between inputs is directly related to that of the hybrids. With the advantage of neither showing group delay nor thermal drift, they are expandable only with limited versatility, since the spacing between contiguous channels must be constant. Additionally, their transmission performances are more distorted the closer the channels to be combined are.
STRETCH LINE CONFIGURATION
PHASING LOOP
OUTPUT
EQ LOAD
INPUT 2
INPUT 1
MANIFOLD MODULAR CONFIGURATION
SHORT CIRCUIT
OUTPUT
BANDPASS FILTER
BANDPASS FILTER
BANDPASS FILTER
INPUT N
INPUT 2
INPUT 1
TVUH
F
(BAN
DIV
V)
12
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V horizontal polarization panel Especially suitable for square masts
Frequency range 470-862 MHz Peak gain 11.35 dB (ref. /2 dipole) 3 dB beam width E-plane: 61 H-plane: 26 Polarization Horizontal Impedance 50 Ohm VSWR 1.1:1 typical (1.13:1 max) Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30 EIA
1 5/8
Pressurization Non pressurized Gas barrier on input connector
Materials
Reflector & radiating elements Radome Radome colour
Aluminium (Stainless steel available on request)
Fiberglass Red or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm Maximum wind speed 220 km/h Wind load (front) 743 N (@160 km/h) Wind load (lateral) 258 N (@160 km/h) Weight 10 Kg (model with DIN 7/16 connector)
Typical mounting Several combinations depending on the radiation pattern required (square typical) Vertical spacing 1000 mm Grounding DC grounded Temperature range -40C to +80C Humidity 100%
Number of Bays
Number ant. per bay
Peak gain (dBd)
Weight (kg)
Wind load (@160 km/h)
System height (mm)
1 2 8.4 20 1.1 kN
1000 3 6.6 30 1.6 kN4 5.3 40 1.5 kN
2 2 11.4 40 2.2 kN
2000 3 9.6 60 3.2 kN4 8.3 80 3.1 kN
4 2 14.4 80 4.4 kN
4000 3 12.6 120 6.4 kN4 11.4 160 6.2 kN
6 2 16.1 120 6.6 kN
6000 3 14.4 180 9.6 kN4 13.1 240 9.3 kN
8 2 17.4 160 8.8 kN
8000 3 15.6 240 12.8 kN4 14.4 320 12.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: - Table supplies data up to 8 bays only for simplification purposes; systems with more bays are available. - Null fill, beam tilt, harness & feeder losses NOT INCLUDED. - Wind load & weight figures without considering cables, splitters & hardware.
Antenna System Characteristics
E-plane Horizontal Pattern
H-plane Vertical Pattern
AT15-250
TVUH
F
(BAN
DIV
V)
13
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V vertical polarization panel Especially suitable for square masts
Frequency range 470-862 MHz Peak gain 11.05 dB (ref. /2 dipole) 3 dB beam width E-plane: 27 H-plane: 62 Polarization Vertical Impedance 50 Ohm VSWR 1.15:1 Maximum power handling peak sync 1.4 KW 3.5 KW 4.2 KW 6.5 KW Maximum power handling RMS 1 KW 2.5 KW 3 KW 4.5 KW
Connector type DIN 7/16 EIA 7/8 DIN 13/30 EIA
1 5/8
Pressurization Non pressurized Gas barrier on input connector
Materials Reflector & radiating elements Radome Radome colour
AluminiumFiberglass
Red or white on request Dimensions (W x D x H) 483 x 264 x 983 mm Maximum wind speed 220 Km/h Wind load (front) 743 N (@160 Km/h) Wind load (lateral) 258 N (@160 Km/h) Weight 9 Kg (model with DIN 7/16 connector)
Typical mounting Several combinations depending on the radiation pattern required (square typical) Vertical spacing 1000 mm Grounding DC grounded Temperature range -40C to +80C Humidity 100%
Number of Bays
Number ant. per bay
Peak gain (dBd)
Weight (Kg)
Wind load (@160 Km/h)
System height (mm)
1 2 8.1 18 1.1 kN
1000 3 6.3 27 1.6 kN 4 5.0 36 1.5 kN
2 2 11.1 36 2.2 kN
2000 3 9.3 54 3.2 kN 4 8.0 72 3.1 kN
4 2 14.1 96 4.4 kN
4000 3 12.3 108 6.4 kN 4 11.1 144 6.2 kN
6 2 15.8 108 6.6 KN
6000 3 14.1 162 9.6 kN 4 12.8 216 9.3 kN
8 2 17.1 144 8.8 kN
8000 3 15.3 216 12.8 kN 4 14.1 288 12.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: - Table supplies data up to 8 bays only for simplification purposes; systems with more bays are available. - Null fill, beam tilt, harness & feeder losses NOT INCLUDED. - Wind load & weight figures without considering cables, splitters & hardware
Antenna System Characteristics
H-planeHorizontal Pattern
E-planeVertical Pattern
AT15-251
TVUH
F
(BAN
DIV
V)
14
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V slant polarization panel Especially suitable for square masts
Frequency range 470-862 MHz Peak gain 11.50 dB (ref. /2 dipole) 3 dB beam width E-plane: 61 H-plane: 26 Polarization Slant (typical 80%H / 20%V) Impedance 50 Ohm VSWR 1.1:1 typical (1.13:1 max) Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW
Connector type DIN 7/16 EIA 7/8 DIN 13/30 EIA
1 5/8
Pressurization Non pressurizedGas barrier on input
connector
Specified gain must be understood for elliptical polarization (80%H / 20%V)
Materials
Reflector & radiating elements Radome Radome colour
Aluminium (Stainless steel available on request)
Fiberglass Red or white on request
Dimensions (W x D x H) 483 x 264 x 983 mm Maximum wind speed 220 km/h Wind load (front) 743 N (@160 km/h) Wind load (lateral) 215 N (@160 km/h) Weight 10 kg (model with DIN 7/16 connector) Typical mounting Square arrangement tower Vertical spacing 1100 mm Grounding DC grounded Temperature range -40C to +80C Humidity 100%
Number of Bays
Number ant. per bay
Peak gain (dBd)
Weight (kg)
Wind load (@160 km/h)
System height (mm)
1 2 8.5 20 1.0 kN
1094 3 6.8 30 1.2 kN 4 5.5 40 1.4 kN
2 2 11.5 40 1.9 kN
2194 3 9.8 60 2.3 kN 4 8.5 80 2.8 kN
4 2 14.5 80 3.8 kN
4394 3 12.8 120 4.7 kN 4 11.5 160 5.7 kN
6 2 16.3 120 5.8 kN
6594 3 14.5 180 7.0 kN 4 13.3 240 8.5 kN
8 2 17.6 160 7.7 kN
8794 3 15.8 240 9.4 kN 4 14.5 320 11.4 kN
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: - Table supplies data up to 8 bays only for simplification purposes; systems with more bays are available. - Null fill, beam tilt, harness & feeder losses NOT INCLUDED. - Wind load & weight figures without considering cables, splitters & hardware.
Antenna System Characteristics
E-plane Horizontal Pattern
H-plane Vertical Pattern
AT15-252
TVUH
F
(BAN
DIV
V)
15
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V circular/elliptical polarization panel Especially suitable for square masts
Frequency range 470-722 MHz Gain (Total field) 11.1 dB (ref. /2 dipole) Gain (linear component for circular polariz.) 8.1 dBd (H. Pol.) 8.1 dBd (V. Pol.) 3 dB beam width Horizontal: 61 Vertical: 27
Polarization Circular or Elliptical (supplied by an integrated hybrid coupler)
Polarization ratio options 50%H /50%V; 60%H /40%V; 70%H /30%V; 80%H /20%V Impedance 50 Ohm VSWR 1.13:1 Maximum power handling RMS 1 kW 2.5 kW Connector type DIN 7/16 EIA 7/8
Pressurization Non presurized Gas barrier on input connector
Materials Reflector & radiating elements Radome Radome colour
AluminiumFiberglass
Red or white on request Dimensions (W x D x H) 483 x 264 x 983 mm Maximum wind speed 220 km/h Wind load (front) 743 N (@160 km/h) Wind load (lateral) 258 N (@160 km/h) Weight 13 kg including hybrid
Typical mounting Several combinations depending on the radiation pattern required (square typical) Vertical spacing 1000 mm Grounding DC grounded Temperature range -40C to +80C Humidity 100%
Number of Bays
Number ant. per bay
Peak gain (dBd)
Weight (kg)
Wind load (@160 km/h)
System height (mm)
1 2 8.1 26 1.1 kN
1000 3 6.4 39 1.6 kN4 5.2 52 1.5 kN
2 2 11.1 52 2.2 kN
2000 3 9.4 78 3.2 kN4 8.2 104 3.1 kN
4 2 14.4 104 4.4 kN
4000 3 12.4 156 6.4 kN4 11.2 208 6.2 kN
6 2 15.9 156 6.6 kN
6000 3 14.1 234 9.6 kN4 13.0 312 9.3 kN
8 2 17.2 208 8.8 kN
8000 3 15.4 312 12.8 kN4 14.2 416 12.4 kN
The above specified gain must be understood for circular polarization
Electrical Specifications
Mechanical & Environmental Specifications
Antenna System Characteristics
NOTES: - Table supplies data up to 8 bays only for simplification purposes; systems with more bays are available. - Null fill, beam tilt, harness & feeder losses NOT INCLUDED. - Wind load & weight figures without considering cables, splitters & hardware.
Horizontal Pattern
Vertical Pattern
OptionalThe panel can be supplied without the input hybrid thus displaying two connectors (DIN 7/16 or EIA 7/8"), one feeding an HPOL array and one feeding a VPOL array.
AT15-245
TVUH
F
(BAN
DIV
V)
16
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V low power superturnstile antennas
UHF Superturnstile Antennas for TV applications offer a broadband omnidirectional radiation pattern with excellent circularity, combined with a minimum wind load impact on the supporting mast. These antenna systems are ideal for top-mounting, and they are supplied ready for installation, fully assembled and enclosed in a GRP cylinder.
AT15-801 AT15-802 Frequency range 470-860 MHz VSWR 1.15:1 Impedance 50 Ohm Polarization Horizontal
Peak gain (ref. /2 dipole) 1 Bay 2 Bays 5 dBd 8 dBd 3 dB vertical beam width (mid-band) 25 11 Maximum power handling RMS 2 kW 5 kW Connector type (1) EIA 7/8" male EIA 1 5/8" male Pressurization Not pressurized
Materials
Batwings Aluminium Connectors Aluminium and brass Isolators PTFE Radome Fiberglass
Radome dimensions ( X H) 323 x 1200 mm 323 x 2300 mm Weight 27 Kg 53 Kg Wind Load @ 160 Km/h 323 N 726 N Maximum wind speed 220 km/h Grounding DC grounded Temperature range -40C to +40C Humidity 100%
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: (1) Other connector types under request.
Others gain values and power handling can be supplied. Please, ask RYMSA RF.
AT15-801 Superturnstile antenna.
AT15-801/802
TVUH
F
(BAN
DIV
V)
17
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
Band IV/V slot antennas Suitable for top-mount or side-mount
Slot antennas for UHF TV applications are a neat way to provide broadcasting solutions minimizing the visual and mechanical impact over its supporting structure. These antennas are constructed fully enclosed in a cylindrical fiberglass radome, featuring very reduced weight and windload figures, while keeping optimum radioelectrical performances under most severe environmental conditions. They are ready for installation in top-mount and side-mount configurations, offering a very wide scope of radiating characteristics depending on the polarization (horizontal, circular, elliptical), on the shape of the horizontal radiation pattern, and on the vertical aperture. AT15-9XX series cover all the possible needs from low power/ low gain solutions up to 16 KW RMS and high gain.
Frequency range 470-806 MHz Multichannel versions available Yes VSWR 1.1:1 across a single channel Polarization Horizontal / Circular / Elliptical Beam tilt & Null Fill Customized under request Impedance 50 Ohm Number of bays From 4 to 24 bays Maximum power handling peak sync From 500 W to 25 KW Maximum power handling RMS From 350 W to 16 KW Connector type EIA 1 5/8 or EIA 3 1/8
Radome Fiberglass (included) Height (for 4 bays and 24 bays) From 2400 mm to 13060 mm Grounding DC grounded Temperature range -40C to +80C Humidity 100%
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: Note: Mechanical data supplied corresponds to channel 30 FCC. Ask RYMSA RF for others horizontal patterns
E-plane Horizontal Pattern 650 MHz
E-plane Horizontal Pattern 650 MHz
E-planeHorizontal Pattern 650 MHz
AT15-9XX
TVUH
F
(BAN
DIV
V)
18
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 50 W digital Bandpass filter
FLDV-006
Filter type Bandpass coaxial Order 6 with internal feedback Cavity size 50 mm Frequency range 470-862 MHz Mask type Non critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling 50 W RMS Connectors N (F) VSWR < 1.15:1 Frequency response (1) 474 MHz 858 MHz
f0 1.0 dB 1.1 dB f0 3.8 MHz 2.1 dB 2.8 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB
Group delay variation 150 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 109 x 198.2 x 178 mm
Materials
Outer conductor Aluminium Inner conductor Silver plated aluminium Tuning elements Silver plated Aluminium Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: (1): Typical specifications for non critical mask 8 MHz channels. Ask RYMSA RF for other cases.
FLDV-006 bandpass filter
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
Optional accesories Directional couplers at input and output
19
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 150 W digital Bandpass filter
FLDV-016
Filter type Bandpass coaxial Order 6 with internal feedback Cavity size 55 mm Frequency range 470-862 MHz Mask type Non critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1) 150 W RMS Connectors DIN 7/16 (F) VSWR 1.22:1 Frequency response (2) 474 MHz 858 MHz
f0 1.0 dB 1.2 dB f0 3.8 MHz 1.9 dB 2.3 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB
Group delay variation 350 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 121 x 290 x 200 mm
Materials
Outer conductor Copper Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
FLDV-016 bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
Optional accessories Directional couplers at inputs and output
20
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 150 W digital Bandpass filter
FLDV-018
Filter type Bandpass coaxial Order 8 with internal feedback Cavity size 55 mm Frequency range 470-862 MHz Mask type Critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1) 150 W RMS Connectors DIN 7/16 (F) VSWR 1.22:1 Frequency response (2) 474 MHz 858 MHz
f0 1.6 dB 1.9 dB f0 3.8 MHz 2.8 dB 4.0 dB f0 4.2 MHz > 8 dB > 8 dB f0 6 MHz > 40 dB > 40 dB f0 12 MHz > 55 dB > 50 dB
Group delay variation 400 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 121 x 345 x 200 mm
Materials
Outer conductor Copper Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Mechanical & Environmental Specifications
Electrical Specifications
FLDV-018 bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
Optional accessories Directional couplers at inputs and output
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
21
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 1.9 kW digital Bandpass filter
FLDV-116
Filter type Bandpass coaxial Order 6 with internal feedback Cavity size 100 mm Frequency range 470-862 MHz Mask type Non critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1) 1900 W RMS Connectors DIN 7/16 (F) or 1 5/8 unflanged VSWR 1.15:1 Group delay variation 175 ns Thermal stability 2 kHz / C
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHz f0 0.45 dB 0.6 dB f0 3.8 MHz 1.0 dB 1.6 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB Channel bandwidth 6 MHz (typical ATSC)
473 MHz 803 MHz f0 0.5 dB 0.7 dB f0 2.69 MHz 0.55 dB 0.8 dB f0 3 MHz 0.6 dB 0.85 dB f0 4 MHz > 5.5 dB > 5.5 dB f0 5 MHz > 18 dB > 18 dB f0 6 MHz > 30 dB > 30 dB f0 9 MHz > 64 dB > 64 dB
Dimensions (W x D x H) 214 x 355 x 430 mm Weight 15 kg
Materials
Outer conductor Copper Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
FLDV-116 bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
Optional accessories Directional couplers at inputs and output Unflanged to flanged adapters Rack mounted
The filter can be field retuned to any channel within specified band
TVUH
F
(BAN
DIV
V)
22
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 1.6 kW digital Bandpass filter
FLDV-118
Filter type Bandpass coaxial Order 8 with internal feedback Cavity size 100 mm Frequency range 470-862 MHz Mask type Critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1) 1600 W RMS Connectors DIN 7/16 (F) or 1 5/8 unflanged VSWR 1.15:1 Group delay variation 350 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 214 x 455 x 430 mm Weight 21 kg
Materials
Outer conductor Copper Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHz f0 0.55 dB 0.8 dB f0 3.8 MHz 2.10 dB 3.1 dB f0 4.2 MHz > 15 dB > 15 dB f0 6 MHz > 40 dB > 40 dB f0 12 MHz > 60 dB > 60 dB Channel bandwidth 6 MHz (typical ISDB-T)
473 MHz 803 MHz f0 0.65 dB 1.0 dB f0 2.79 MHz 2.10 dB 2.6 dB f0 3.15 MHz > 15 dB > 15 dB f0 4.5 MHz > 35 dB > 35 dB f0 9 MHz > 60 dB > 60 dB
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
FLDV-118 bandpass filter
Optional accessories Directional couplers at inputs and output Unflanged to flanged adapters Rack mounted
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
23
RYMSA RF will reserve the right to make any changes without notice. E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 3.5 kW digital Bandpass filter
FLDV-156
Filter type Bandpass coaxial Order 6 with internal feedback Cavity size 150 mm Frequency range 470-862 MHz Mask type Non critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1)
Without liquid cooling With optional liquid cooling
3500 W (8 MHz bandwidth) 3000 W (6 MHz bandwidth)
6000 W (8 MHz bandwidth) 4700 W (6 MHz bandwidth)
Connectors Unflanged 1 5/8 VSWR 1.15:1 Group delay variation 350 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 320 x 522 x 407 mm Weight 27 kg
Materials
Outer conductor Copper Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHz f0 0.3 dB 0.35 dB f0 3.8 MHz 0.7 dB 0.9 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB Channel bandwidth 6 MHz (typical ATSC)
473 MHz 803 MHz f0 0.35 dB 0.4 dB f0 2.69 MHz 0.50 dB 0.55 dB f0 3 MHz 0.55 dB 0.65 dB f0 4 MHz > 5.5 dB > 5.5 dB f0 5 MHz > 20 dB > 20 dB f0 6 MHz > 35 dB > 35 dB f0 9 MHz > 64 dB > 55 dB
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
FLDV-156 bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
Optional accessories Integrated stainless steel cold plate for liquid cooling Directional couplers at inputs and output Unflanged to flanged adapters Liquid cooling system, CS00-002 Rack mounted
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
24
RYMSA RF will reserve the right to make any changes without notice. E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 2.5 kW digital Bandpass filter
FLDV-158
Filter type Bandpass coaxial Order 8 with internal feedback Cavity size 150 mm Frequency range 470-862 MHz Mask type Critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz
Maximum power handling (1)
Without liquid cooling With optional liquid cooling
2500 W (8 MHz bandwidth) 2000 W (6 MHz bandwidth)
4700 W (8 MHz bandwidth) 3000 W (6 MHz bandwidth)
Connectors Unflanged 1 5/8 VSWR 1.15:1 Group delay variation 600 ns Thermal stability 2 kHz / C
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHz f0 0.5 dB 0.6 dB f0 3.8 MHz 1.4 dB 1.8 dB f0 4.2 MHz > 13 dB > 14 dB f0 6 MHz > 30 dB > 30 dB f0 12 MHz > 55 dB > 55 dB Channel bandwidth 6 MHz (typical ISDB-T) 473 MHz 803 MHz f0 0.55 dB 0.75 dB f0 2.79 MHz 1.6 dB 2.00 dB f0 3.15 MHz > 15 dB > 15 dB f0 4.5 MHz > 30 dB > 30 dB f0 9 MHz > 55 dB > 55 dB
Dimensions (W x D x H) 320 x 672 x 407 mm Weight 39 kg
Materials
Outer conductor Copper Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
FLDV-158 bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
Optional accessories Integrated stainless steel cold plate for liquid cooling Directional couplers at input and output Unflanged to flanged adapters Liquid cooling system CS00-002 Rack mounted
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
25
RYMSA RF will reserve the right to make any changes without notice. E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 9 kW digital Bandpass filter
FLDV-196
Filter type Bandpass coaxial Order 6 with internal feedback Cavity size 200 mm Frequency range 470-862 MHz Mask type Non critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1)
Without liquid cooling With liquid cooling
5000 W
9000 W
Connectors Unflanged 3 1/8 VSWR 1.15:1 Group delay variation 350 ns Thermal stability 2 kHz / C Cooling Liquid (glycol and water coolant) Flow 2 l/min
Dimensions (W x D x H) 426 x 678 x 385 mm Weight 42 kg
Materials
Outer conductor Copper (cold plate of stainless steel)Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHzf0 0.25 dB 0.35 dB f0 3.8 MHz 0.70 dB 1.0 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB Channel bandwidth 6 MHz (typical ATSC) 474 MHz 803 MHz f0 0.3 dB 0.5 dB f0 2.69 MHz 0.45 dB 0.65 dB f0 3 MHz 0.5 dB 0.75 dB f0 4 MHz > 7 dB > 7 dB f0 5 MHz > 20 dB > 20 dB f0 6 MHz > 35 dB > 35 dB f0 9 MHz > 64 dB > 64 dB
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
FLDV-196 bandpass filter
Optional accessories Directional couplers at input and output Unflanged to flanged adapters Liquid cooling system CS00-002 Rack mounted
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
26
RYMSA RF will reserve the right to make any changes without notice. E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask filter Typical power: 11 kW digital Bandpass filter
FLDV-198X
Filter type Bandpass coaxial Order 8 with internal feedback Cavity size 200 mm Frequency range 470-862 MHz Mask type Critical Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz Maximum power handling (1)
Without liquid cooling With liquid cooling
4000 W 11000 W
Connectors Unflanged 3 1/8 VSWR 1.15:1 Group delay variation 600 ns Thermal stability 2 kHz / C Cooling (for input power over 4 KW) Liquid (glycol and water coolant) Flow 2 l/min
Channel bandwidth 8 MHz (typical DVB-T) 474 MHz 858 MHz f0 0.35 dB 0.5 dB f0 3.8 MHz 1.1 dB 1.50 dB f0 4.2 MHz > 15 dB > 15 dB f0 6 MHz > 40 dB > 35 dB f0 12 MHz > 60 dB > 60 dB Channel bandwidth 6 MHz (typical ISDB-T) 473 MHz 803 MHz f0 0.4 dB 0.5 dB f0 2.79 MHz 1.1 dB 1.35 dB f0 3.15 MHz > 12 dB > 12 dB f0 4.5 MHz > 40 dB > 30 dB f0 9 MHz > 55 dB > 50 dB
Dimensions (W x D x H) 437 x 873 x 427 mm Weight 53 kg
Materials
Outer conductor Copper (cold plate of stainless steel)Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses (2)
FLDV-198X bandpass filter
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. (2): Other frequency responses can be supplied. Please, ask RYMSA RF.
Optional accessories Directional couplers at input and output Unflanged to flanged adapters Liquid cooling system CS00-002 Rack mounted
The filter can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
27
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 100 W digital NB input Constant impedance diplexer
DPDV-006
Filter type FLDV-006 (50 mm) Order of the bandpass filter 6 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output) 100 / 200 / 200 W RMS Connectors (NB/WB/Output) N (F) Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Frequency response (1) 474 MHz 858 MHz
f0 1.0 dB 1.1 dB f0 3.8 MHz 2.1 dB 2.8 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB
Isolation 30 dB Group delay variation 150 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 355 X 483 X 90 (2u) mm
Materials
Outer conductor Aluminium Inner conductor Silver plated aluminium Tuning elements Silver plated aluminium Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: (1): Typical specifications for non adjacent 8 MHz channel. Ask RYMSA RF for other cases.
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-006 6 poles constant impedance
channel combiner
Optional accessories Directional couplers and/or fine matcher at input and output Aluminium tray to install in a 19 rack
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
28
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 300 W digital NB input Constant impedance diplexer
DPDV-016
Filter type FLDV-016 (55 mm) Order of the bandpass filter 6 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output) (1) 0.3 / 1.1 / 1.1 kW RMS Connectors (NB/WB/Output) DIN 7/16 (F) Channel bandwidth 6, 7, 8 MHz VSWR 1.15:1 Frequency response (1) 474 MHz 858 MHz
f0 1.1 dB 1.25 dB f0 3.8 MHz 2.0 dB 2.4 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB
Isolation 30 dB Group delay variation 350 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 483 x 405 x 130 mm
Materials
Outer conductor Copper and brass Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE
Finishing Chromatized plating & long lasting black paintScrews Stainless steel
Temperature range -10C to +50C
The combiner can be field retuned to any frequency within specified band
Electrical Specifications
Mechanical & Environmental Specifications EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-016 6 poles constant impedance
channel combiner
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data.
(2): Typical specifications for adjacent channel. Ask RYMSA RF for other cases.
Optional accessories Directional couplers and/or fine matchers at inputs and output
TVUH
F
(BAN
DIV
V)
29
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 300 W digital NB input Constant impedance diplexer
DPDV-018
Filter type FLDV-018 (55 mm) Order of the bandpass filter 8 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output) (1) 0.3 / 1.1 / 1.1 kW RMS Connectors (NB/WB/Output) DIN 7/16 (F) Channel bandwidth 6, 7, 8 MHz VSWR 1.15:1 Frequency response (1) 474 MHz 858 MHz
f0 1.7 dB 2.0 dB f0 3.8 MHz 2.9 dB 4.1 dB f0 4.2 MHz > 8 dB > 8 dB f0 6 MHz > 40 dB > 30 dB f0 12 MHz >55 dB > 50 dB
Isolation 30 dB Group delay variation 400 ns Thermal stability 2 kHz / C
Dimensions (W x D x H) 483 x 460 x 130 mm
Materials
Outer conductor Copper and brass Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE
Finishing Chromatized plating & long lasting black paint
Screws Stainless steel Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental SpecificationsEQ
LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-018 8 poles constant impedance
channel combiner
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data.
(2): Typical specifications for adjacent channel. Ask RYMSA RF for other cases.
Optional accessories Directional couplers and/or fine matchers at inputs and output
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
30
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 1.2 kW, 2 kW digital NB input Constant impedance diplexer
DPDV-116, DPDV-146, DPDV-146HP, DPDV-1462EHP
Filter type FLDV-116 (100 mm)Order of the bandpass filter 6 with internal feedbackFrequency range 470-862 MHzType Constant impedance Impedance 50 OhmMinimum channel spacing 0Max. power handling (NB/WB/Output)(1) DPDV-116 1.2/1.2/1.2 kW RMS DPDV-146 1.2/2.3/3.5 kW RMS
DPDV-146HP DPDV-1462EHP 1.2/5/5 kW RMS 2/5/5 kW RMS
Connectors (NB/WB/Output)
DPDV-116 DIN 7/16(F) / DIN 7/16(F) / DIN 7/16(F) DPDV-146, DPDV-146HP DIN 7/16(F) / 1 5/8unflanged / 1 5/8unflanged DPDV-1462EHP EIA 7/8(M) / 1 5/8unflanged / 1 5/8unflanged
Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 200 ns Thermal stability 2 kHz / C
Channel bandwidth 8 MHz (typical DVB-T) (2) 474 MHz 858 MHzf0 0.5 dB 0.65 dB f0 3.8 MHz 1.1 dB 1.6 dB f0 4.2 MHz > 4 dB > 4 dB f0 6 MHz > 20 dB > 20 dB f0 12 MHz > 40 dB > 40 dB Channel bandwidth 6 MHz (typical ATSC) (2) 473 MHz 803 MHz f0 0.55 dB 0.75 dB f0 2.69 MHz 0.6 dB 0.85 dB f0 3 MHz 0.65 dB 0.9 dB f0 4 MHz > 5.5 dB > 5.5 dB f0 5 MHz > 18 dB > 18 dB f0 6 MHz > 30 dB > 30 dB f0 9 MHz > 64 dB > 64 dB
Directional couplers and/or fine matchers at inputs and output Unflanged to flanged adapters at output
Dimensions (W x D x H) 483 x 423 x 448 mm
Materials
Outer conductor Copper (filters), Aluminium (rest) Inner conductor Silver plated aluminium and brass Tuning elements Invar, silver plated aluminium and brassIsolators PTFE Finishing Chromatized plating & long lasting paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental SpecificationsEQ
LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NB INPUT
WBINPUT
OUTPUT
BAND PASS FILTER
Frequency Responses
Optional Accessories
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. Other narrowband input power handlings with the same filter type can be used. Please, ask RYMSA RF.
(2): Typical specifications for non adjacent channel. Ask RYMSA RF for other cases.
DPDV-1462EHP 6 poles constant impedance
channel combiner
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
31
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 1.2 kW, 2kW digital NB input Constant impedance diplexer
DPDV-118, DPDV-148, DPDV-148HP, DPDV-1482EHP
Filter type FLDV-118 (100 mm) Order of the bandpass filter 8 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output)(1) DPDV-118 1.2/1.2/1.2 kW RMS DPDV-148 1.2/2.3/3.5 kW RMS DPDV-148HP 1.2/5/5 kW RMS DPDV-1482EHP 2/5/5 kW RMS Connectors (NB/WB/Output)
DPDV-118 DIN 7/16(F) / DIN 7/16(F) / DIN 7/16(F) DPDV-148, DPDV-148HP DIN 7/16(F) / 1 5/8unflanged / 1 5/8unflanged DPDV-1482EHP EIA 7/8(M) / 1 5/8unflanged / 1 5/8unflanged
Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 450 ns Thermal stability 2 kHz / C
Channel bandwidth 8 MHz (typical DVB-T) (2) 474 MHz 858 MHz f0 0.60 dB 0.85 dB f0 3.8 MHz 2.15 dB 3.15 dB f0 4.2 MHz > 15 dB > 15 dB f0 6 MHz > 40 dB > 40 dB f0 12 MHz > 55 dB > 55 dB Channel bandwidth 6 MHz (typical ISDB-T) (2) 473 MHz 803 MHz f0 0.70 dB 1.05 dB f0 2.79 MHz 2.15 dB 2.65 dB f0 3.15 MHz > 15 dB > 15 dB f0 4.5 MHz > 35 dB > 35 dB f0 9 MHz > 60 dB > 60 dB
Dimensions (W x D x H) 610 x 575 x 900 mm
Materials
Outer conductor Copper (filters), Aluminium (rest) Inner conductor Silver plated aluminium and brass Tuning elements Invar, silver plated aluminium and brassIsolators PTFE Finishing Chromatized plating & long lasting paint Screws Stainless steel
Temperature range -10C to +50C
Directional couplers and/or fine matcher at inputs and output Unflanged to flanged adapters at output
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses
Optional Accessories
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NB INPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-148HP 8 poles constant impedance
channel combiner
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. Other narrowband input power handlings with the same filter type can be used. Please, ask RYMSA RF.
(2): Typical specifications for non adjacent channel. Ask RYMSA RF for other cases.
TVUH
F
(BAN
DIV
V)
The combiner can be field retuned to any frequency within specified band
32
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 5 kW digital NB input Constant impedance diplexer
DPDV-446, DPDV-456, DPDV-456HP, DPDV-466
Filter type FLDV-156 (150 mm) Order of the bandpass filter 6 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Recommended min. channel spacing 0Max. power handling (NB/WB/Output) (1) DPDV-446 5/5/5 kW RMS DPDV-456 5/5/10 kW RMS DPDV-456HP 5/15/15 kW RMS DPDV-466 5/25/25 kW RMS Connectors (NB/WB/Output)
DPDV-446 1 5/8 / 1 5/8 / 1 5/8 Unflanged DPDV-456, DPDV-456HP 1 5/8 / 3 1/8 / 3 1/8 Unflanged DPDV-466 1 5/8 / 4 1/2 / 4 1/2 Unflanged
Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 350 ns Thermal stability 2 kHz / C Thermoswitch at EQ load Yes
Channel bandwidth 8MHz
(typical DVB-T) (2) Channel bandwidth 6MHz
(typical ATSC) (2)
474 MHz 858 MHz 473 MHz 803 MHz f0 0.35 dB 0.40 dB f0 0.4 dB 0.45 dB f0 3.8 MHz 0.75 dB 1.0 dB f0 2.69 MHz 0.55 dB 0.60 dB f0 4.2 MHz > 4 dB > 4 dB f0 3 MHz 0.60 dB 0.70 dB f0 6 MHz > 20 dB > 20 dB f0 4 MHz > 5.5 dB > 5.5 dB f0 12 MHz > 40 dB > 40 dB f0 5 MHz > 20 dB > 20 dB f0 6 MHz > 35 dB > 35 dB f0 9 MHz > 64 dB > 55 dB
Dimensions (W x D x H) 428 x 980 x 850 mm Weight 88 kg
Materials
Outer conductor Copper (filters), aluminium (rest) Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE
Finishing Chromatized plating & long lasting paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Response
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-456HP 6 poles constant impedance
channel combiner with directional coupler and fine matcher as
accessories
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. Other narrowband input power handlings with the same filter type can be used. Please, ask RYMSA RF.
Specified power applies to filters working without liquid cooling system.
(2): Typical specifications for non adjacent channel. Ask RYMSA RF for other cases.
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
Optional accessories Directional couplers and/or fine matchers at inputs and output Unflanged to flanged adapters at inputs and output Liquid cooling system CS00-00X series
33
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Typical power: 5 kW digital NB input Constant impedance diplexer
DPDV-448, DPDV-458, DPDV-458HP, DPDV-468
Filter type FLDV-158 (150 mm) Order of the bandpass filter 8 poles with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum frequency spacing 0 Max. power handling (NB/WB/Output) (1)
DPDV-448 5(2) /5/5 KW RMS DPDV-458 5(2) /5/10 KW RMS DPDV-458HP 5(2) /15/15 KW RMS DPDV-468 5(2)/25/25 KW RMS
Input connectors (NB/WB/Output) DPDV-448 1 5/8 / 1 5/8 / 1 5/8 Unflanged DPDV-458, DPDV-458HP 1 5/8 / 3 1/8 / 3 1/8 Unflanged DPDV-468 1 5/8 / 4 1/2 / 4 1/2 Unflanged
Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 600 ns Thermal stability 2 kHz / C Thermoswitch at EQ load Yes
Dimensions (W x D x H) 428 x 980 x 1000 mm Weight 100 kg
Materials
Outer conductor Copper (filters), Aluminium (rest) Inner conductor Silver plated aluminium and brass
Tuning elements Invar, silver plated aluminium and brass Isolators PTFE
Finishing Chromatized plating & long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Channel bandwidth 8 MHz (typical DVB-T) (3)
Channel bandwidth 6 MHz (typical ISDBT) (3)
474 MHz 858 MHz 473 MHz 803 MHz f0 0.55 dB 0.65 dB f0 0.6dB 0.80 dB f0 3.8 MHz 1.45 dB 1.85 dB f0 2.79 MHz 1.65 dB 2.10 dB f0 4.2 MHz > 13 dB > 14 dB f0 3.15 MHz > 15 dB > 15 dB f0 6 MHz > 30 dB > 30 dB f0 4.5 MHz > 30 dB > 30 dB f0 12 MHz > 55 dB > 55 dB f0 12 MHz > 55 dB > 55 dB
The combiner can be field retuned to any frequency within specified band
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Response
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-458 8 poles constant impedance
channel combiner with directional coupler and fine matcher as
accesories
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. Other narrowband input power handlings with the same filter type can be used. Please, ask RYMSA RF.
Specified power applies to filters working without liquid cooling system
(2): 4 kW RMS for 6 MHz channel bandwidth tuning
(3): Typical specifications for non adjacent channel. Ask RYMSA RF for other cases.
Optional accessories Directional couplers and/or fine matchers at inputs and output Unflanged to flanged adapters at inputs and output Liquid cooling system CS00-00X series
TVUH
F
(BAN
DIV
V)
34
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Maximum power: 15 kW digital NB input Constant impedance diplexer
DPDV-656EHP, DPDV-666EHP4, DPDV-676EHP4/6
Filter type FLDV-196 (200 mm) Order of the bandpass filter 6 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output) (1) DPDV-656EHP 15/15/15 kW RMS
DPDV-666EHP4 DPDV-676EHP4 15/25/25 kW RMS 15/25/50 kW RMS
DPDV-676EHP6 15/40/50 kW RMS Connectors (NB/WB/Output)
DPDV-656EHP 3 1/8 / 3 1/8 / 3 1/8 Unflanged
DPDV-666EHP4 DPDV-676EHP4
3 1/8 / 4 1/2 / 4 1/2 Unflanged 3 1/8Unflanged /4 1/2Unflanged/EIA 6 1/8
DPDV-676EHP6 3 1/8 Unflanged / EIA 6 1/8/ EIA 6 1/8 Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 350 ns Thermal stability 2 kHz / C Thermoswitch at EQ load Yes Cooling (for NB power over 9-10 kW) Liquid (glycol and water coolant) Flow 2 l/min
Channel bandwidth 8 MHz
(typical DVB-T) (2) Channel bandwidth 6MHz
(typical ATSC) (2) 474 MHz 858 MHz 473 MHz 703 MHz f0 0.30 dB 0.40 dB f0 0.35 dB 0.55 dB f0 3.8 MHz 0.75 dB 1.10 dB f0 2.69 MHz 0.50 dB 0.7 dB f0 4.2 MHz > 4 dB > 4 dB f0 3 MHz 0.55 dB 0.8 dB f0 6 MHz > 20 dB > 20 dB f0 4 MHz > 7 dB > 7 dB f0 12 MHz > 40 dB > 40 dB f0 5 MHz > 20 dB > 20 dB f0 6 MHz > 35 dB > 35 dB f0 9 MHz > 64 dB > 64 dB
Dimensions (W x D x H) DPDV-656EHP, 666EHP4 500 x 980 x 1054 mm DPDV-676EHP4, DPDV-676EHP6 580 x 1330 x 1490 mm Weight 195 kg (DPDV-676EHP4/6), 128 kg (rest)
Materials
Outer conductor Copper (filters), aluminium (rest) Inner conductor Silver plated aluminium and brass Tuning elements Invar and silver plated aluminium and brass Isolators PTFE
Finishing Chromatized plating & long lasting paintScrews Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications EQ
LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
Frequency Responses
DPDV-676EHP4 6 poles constant impedance
channel combiner
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data. Other narrowband input power handlings with the same filter type can be used. Please, ask RYMSA RF.
Specified power applies to filters working without liquid cooling system.
(2): Typical specifications for non adjacent channel. Ask RYMSA RF for other cases.
Optional accessories Directional couplers and/or fine matchers at inputs and output Unflanged to flanged adapters at output Liquid cooling system CS00-00X series
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
35
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V DTV mask channel combiner Maximum power: 15 kW digital NB input Constant impedance diplexer
DPDV-658EHPX, DPDV-668EHP4X, DPDV-678EHP4X/6X
Filter type FLDV-198X (200 mm) Order of the bandpass filter 8 with internal feedback Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum channel spacing 0 Max. power handling (NB/WB/Output) (1) DPDV-658EHPX 15/15/15 kW RMS
DPDV-668EHP4X DPDV-678EHP4X 15/25/25 kW RMS 15/25/50 kW RMS
DPDV-678EHP6X 15/40/50 kW RMS Connectors (NB/WB/Output)
DPDV-658EHPX 3 1/8 / 3 1/8 / 3 1/8 Unflanged
DPDV-668EHP4X DPDV-678EHP4X 3 1/8 / 4 1/2 / 4 1/2 Unflanged 3 1/8Unflanged/ 4 1/2 / EIA 6 1/8
DPDV-678EHP6X 3 1/8unflanged/EIA 6 1/8/EIA 6 1/8 Channel bandwidth 6, 7, 8 MHz VSWR 1.10:1 Isolation 35 dB Group delay variation 700 ns Thermal stability 2 kHz / C Thermoswitch at EQ load Yes Cooling (for NB power over 8 KW) Liquid (glycol and water coolant) Flow 2 l/min
Channel bandwidth 8 MHz
(typical DVB-T) (2) Channel bandwidth 6 MHz
(typical ISDB-T) (2) 474 MHz 858 MHz 474 MHz 803 MHzf0 0.40 dB 0.55 dB f0 0.45 dB 0.55 dBf0 3.8 MHz 1.15 dB 1.55 dB f0 2.79 MHz 1.15 dB 1.40 dBf0 4.2 MHz > 15 dB > 15 dB f0 3.15 MHz > 12 dB > 12 dB f0 6 MHz > 40 dB > 35 dB f0 4.5 MHz > 40 dB > 30 dB f0 12 MHz > 60 dB > 60 dB f0 12 MHz > 55 dB > 50 dB
Dimensions (W x D x H) DPDV-658EHPX, 668EHP4X 500 x 980 x 1300 mm DPDV-678EHP4X DPDV-678EHP6X 580 x 1330 x 1730 mm Weight 236 Kg (DPDV-678EHP4X/6X), 169 Kg (rest)
Materials
Outer conductor Copper (filters), aluminium (rest) Inner conductor Silver plated aluminium and brass
Tuning elements Invar and silver plated aluminium and brass Isolators PTFE
Finishing Chromatized plating & long lasting paintScrews Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Responses
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data.
Specified power applies to filters working without liquid cooling system
(2): Typical specifications for adjacent channel. Ask RYMSA RF for other cases.
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DPDV-678EHP4X 8 poles constant impedance
channel combiner
Optional accessories Directional couplers and/or fine matchers at inputs and output Unflanged to flanged adapters at inputs and output Liquid cooling system CS00-00X series
The combiner can be field retuned to any frequency within specified band
TVUH
F
(BAN
DIV
V)
36
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V channel combiner Typical power: 10, 20, 30 kW digital NB input Constant impedance diplexer
41200-dual mode series
Frequency Range (MHz)
Filter Orders
Connectors (EIA)
Max. Power Handling (kW) RMS
NB WB Output NB WB Output 470-862 4, 6, 8 3 1/8 4 1/16 4 1/16 10 20 30 470-700 4, 6, 8 3 1/8 6 1/8 6 1/8 10 50 60 470-862 4, 6, 8 3 1/8 6 1/8 6 1/8 10 50 60 470-700 4, 6, 8 4 1/16 6 1/8 6 1/8 20 40 60 470-862 4, 6, 8 4 1/16 6 1/8 6 1/8 20 40 60 470-700 4, 6, 8 6 1/8 6 1/8 6 1/8 30 30 60 470-862 4, 6, 8 6 1/8 6 1/8 6 1/8 30 30 60
Critical Mask (3) Non Critical Mask (3) 470 MHz 862 MHz 470 MHz 862 MHz
f0 0.15 dB 0.3 dB 0.1 dB 0.25 dB f03.8 MHz 0.78 dB 0.92 dB 0.51 dB 0.65 dB f04.2 MHz > 8 dB > 8 dB > 4 dB > 4 dB f06 MHz > 40 dB > 40 dB > 20 dB > 20 dB f012 MHz > 60 dB > 60 dB > 30 dB > 30 dB
Filter type Bandpass waveguide (dual-mode) Type Constant Impedance Impedance 50 Ohm Channel bandwidth 6, 7, 8 MHz
VSWR Narrowband Input (1) Wideband Input 1:08:1
1.10:1 Multiple Channels Isolation > 30 dB
Dimensions Width x Depth 1325 x 1220 mm
Height (2) From 1775 mm to 3050 mm
Materials
Outer conductor Aluminium
Inner conductor Aluminium and silver plated Aluminium Tuning elements Copper and brass Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
Frequency Response NOTES: (1): Typical specifications for 8 MHz channels. Ask RYMSA RF for other cases.
(2): Dimensions given for the position shown in the picture. The frame allows the installation in a different orientation. (3): Mask for a typical 8 MHz channel with a 6th order dual mode filter.
Models
41200 Series 6 poles constant impedance
channel combiner
TVUH
F
(BAN
DIV
V)
37
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V non mask channel combiner Typical power: 70 + 300 W Constant impedance diplexer
DP15-02A
Order of the band-pass filter 4 Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Recommended min. frequency spacing 1 guard channel
Max. power handling (NB/WB/Output) (1) 70/300/300 W peak sync 50/200/200 W RMS Input connectors N (F) Output connector N (F) Channel bandwidth 6, 7, 8 MHz
VSWR Narrowband input 1.06 Wideband input 1.10:1
Insertion loss Narrowband input (2) 0.9 dB Wideband input 0.05 dB
Isolation Narrowband input 30 dB Wideband input 30 dB
Dimensions (W x D x H) 252 x 43 x 152 mm
Materials
Outer conductor Aluminium Inner conductor Silver plated aluminium Tuning elements Silver plated aluminium Isolators PTFE Finishing Long lasting black paint Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: (1): See section Environmental Conditions for an accurate application of power handling data.
(2): Typical specifications for 8 MHz channels. Ask RYMSA RF for other cases.
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
4 poles constant impedance tetraplexer (including structure to install in a 19 " rack and measurement coupler at the output)
Optional accessories Directional couplers at inputs and output Structure to install in a 19 rack
TVUH
F
(BAN
DIV
V)
38
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
The combiner can be field retuned to any frequency within specified band
UHF band IV-V non mask channel combiner Typical power: 400 + 800 W Constant impedance diplexer
DP15-12A
Order of the bandpass filter 4 Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum frequency spacing (1) 2 guard channels
Max. power handling (NB/WB/Output) (2) 400/800/1200 W peak sync 280/560/840 W RMS Input connectors (3) DIN 7/16 (F) Output connector (3) DIN 7/16 (F) Channel bandwidth 6, 7, 8 MHz
VSWR Narrowband input 1.07:1 Wideband input 1.20:1 (typical 1.1:1)
Insertion loss Narrowband input (4) 1.2 dB (typical 0.7 dB) Wideband input 0.2 dB
Isolation Narrowband input 26 dB Wideband input 35 dB
Dimensions (W x D x H) 220 x 352 x 315 mm
Materials
Outer conductor Aluminium and brass Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE Finishing Chromatized plating Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications
NOTES: (1): Less than two channels frequency spacing can be achieved by sacrifying the transmission response figures.
(2): See section Environmental Conditions for an accurate application of power handling data.
(3): N (F) connector available.
(4): Typical specifications for 8 MHz channels. Ask RYMSA RF for other cases.
EQ LOAD
CONSTANT IMPEDANCE CONFIGURATION
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DP15-12A 4 poles constant impedance
channel combiner
Optional accessories Directional couplers at inputs and output
TVUH
F
(BAN
DIV
V)
39
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
The combiner can be field retuned to any frequency within specified band
UHF band IV-V non mask channel combiner Typical power: 2 + 5 kW, 2 + 12 kW Constant impedance diplexer
DP15-340, DP15-350
Order of the bandpass filters 3 4 Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum frequency spacing 2 guard channels 1 guard channel
Max. power handling (NB/WB/Output) DP15-340 DP15-350
2/7/7 kW peak sync,1.4/4.9/4.9 kW RMS
2/12/12 kW peak sync,1.4/9/9 kW RMS
Input connectors (NB/WB) (1) DP15-340 DP15-350
Unflanged 1 5/8/Unflanged 1 5/8 Unflanged 1 5/8/Unflanged 3 1/8
Output connector (1) DP15-340 DP15-350
Unflanged 1 5/8 Unflanged 3 1/8
Channel bandwidth 6, 7, 8 MHz
VSWR Narrowband input 1.07:1 Wideband input 1.10:1
Insertion loss Narrowband input (2) 0.5 dB 0.6 dB Wideband input 0.2 dB
Isolation NB input to WB input 30 dB WB input to NB input 40 dB
Dimensions DP15-340 (W x D x H) 329 x 790 x 570 329 x 790 x 680 DP15-350 (W x D x H) 379 x 717 x 552 379 x 717 x 662
Materials
Outer conductor Aluminium Inner conductor Silver plated brass Tuning elements Silver plated brass Isolators PTFE Finishing Chromatized plating Screws Stainless steel
Temperature range -10C to +50C
Electrical Specifications
Mechanical & Environmental Specifications OUTPUT
BANDPASS FILTER
NBINPUT
WBINPUT
EQ LOAD
BANDPASS FILTER
CONSTANT IMPEDANCE CONFG.
EQ LOAD
CONSTANT IMPEDANCE CONFG.
BAND PASS FILTER
NBINPUT
WBINPUT
OUTPUT
BAND PASS FILTER
DP15-340 4 poles constant impedance
channel combiner
Optional accessories Directional couplers at inputs and output Unflanged to flanged adapters at inputs and output Band pass filter on wideband input (3) Thermoswitch in EQ load
TVUH
F
(BAN
DIV
V)
NOTES: (1): Other connectors on request
(2): Typical specifications for 8 MHz channels. Ask RYMSA RF for other cases.
(3): The use of an extra filter connected to the wideband input enhances isolation between inputs, thus reducing the possible generation of inter-mod products.
40
RYMSA RF will reserve the right to make any changes without notice.
E-mail: [email protected] Web: www.rymsarf.com
UHF band IV-V non mask channel combiner Typical power: 5+5 kW, 10+10 kW Constant impedance diplexer
DP15-440, DP15-540
Order of the bandpass filter 3 Frequency range 470-862 MHz Type Constant impedance Impedance 50 Ohm Minimum frequency spacing (1) 2 guard channels Max. power handling (NB/WB/Output)
(2) DP15-440 5/10/10 kW peak sync, 3.5/7/7 kW RMS DP15-540 10/20/20 kW peak sync, 7