4G KiOSK The 4G KiOSK is a Standalone Independent and complete “self contained” mobile BWA System. It is designed to provide communication solutions in places without electricity, struck zone disasters. The site can be rapid establishment and include WiMAX Infrastructure, NOC, Satellite Backhaul or Microwave, Wind/Solar Hybrid Power System (or Other Power Generator). The system supply to the subscribers Triple play mobile and fixed services as Internet Services, Voice over IP services, Video streaming Services and Value added Services (Surveillance, Distant Learning, VOD, etc).

RNF2001 IEEE802.16e-2005 PHY/MAC SiliconThe RNA2001 mobile WiMAX Silicon for MACRO and PICO Base Stations is an advanced implementation of the IEEE802.16e-2005 standard modem and low level MAC layer. The device is fully compliant with the WiMAX Forum “System Profile” and Wave-2 functionalities. The device supports advanced features beyond the WiMAX Forum recommendations such as receive beam forming, transmit beam forming, uplink sounding, close Loop MIMO and Multicast/Broadcast Services . The RNF2001 is a perfect solution for flexible implementations for a variety of applications including:

Micro/Macro BS: Supports both Single SC (Sector Card) and Multi-SC, with advanced networking capabilities and the

ability to support a large numbers of concurrent users, within a wide coverage range.

PICO BS: A small and inexpensive mobile WiMAX solution, targeted for short to medium range coverage in indoor or outdoor deployment

RNA300 IEEE802.16e Rev 2 PHY/MAC SoCThe RNA300 is a high performance and highly – integrated Soc that provides an optional solution for Mobile Subscriber Systems (MSS) that want to employ IEEE802.16e Rev 2 WiMAX functionality. THE RNA 300 is self-contained and only requires a handful of external components to create a wireless endto- end Mobile WiMAX solution for interfacing between WiMAX base stations (BSs) and MSS. The RNA300 utilizes state-of-the art System-on-Chip (SoC) technology. It contains analog and digital mixed-signals cores and an embedded ARM 11 CPU. This provides a highly-integrated, single-chip solution in addition to integration support for a single chip RF, Base-Band, WI-Fi and VoIP at a very low-cost. The chip incorporates both PHY and MAC layers for implementation of OFDMA terminals that comply with the IEEE 802.16e standard. It contains advanced features, such as: MIMO Matrix B, collaborative MIMO, closed-loop MIMO (Matrix 4X2), beam-forming support, higher throughput (50Mbps), low power consumption, HARQ type 4, as well as application processor functions.

Reference Design KitsRuncom’s base station and CPE products are available for OEM-s and ODM-s in a form of a reference design kit. A complete production database is available with a variety of RF solutions including 1.4–1.8 GHz band, 2.4–2.7 GHz band and 3.3–3.8 GHz band.

Founded in 1997, Runcom Technologies develops, manufactures and markets superior End-to-End 4G Solutions including fixed and mobile terminals, base stations, ASN gateways, Network operating Centers (NOC) and Value Added Services that target the emerging 4G market, enabling the delivery of enhanced communications services to cellular phones and other mobile and fixed devices. Runcom also provides state of the art silicon solutions to OEM’s and ODM’s worldwide.A privately owned company headquartered in Rishon Lezion, Israel, Runcom is the recognized pioneer of OFDMA® (Orthogonal Frequency Division Multiple Access) NLOS (Non-Line of Sight) technology, which has been adopted by ETSI for wireless telecom applications and by the WiMAX Forum® for its IEEE 802.16e standard.Runcom’s seasoned management team and high standards of excellence together with its talented and highly committed engineering workforce are cultivating the leading standing of the company in the OFDMA solutions arena and its prominent involvement in the WiMAX Forum – all position it competitively to lead the way in providing 4G solutions for lucrative, mobile Wireless MAN applications in a variety of markets.

Please contact us:Runcom Technologies Ltd.info@runcom.com Tel: +972-3-9428888

For more information on Runcom’s products see our website: www.runcom.com

RNU4000BS Base stationRuncom’s RNU4000BS Base Station is compliant with IEEE 802.16e Wave 2 profile and WiMAX forum requirements for mobile, broadband wireless and metropolitan access networks. The Base Station performs all the required capabilities of the Mobile BS next generation such as: WiMAX Modem PHY and MAC functions, SNMP based management protocol with advanced alarm and events system with full support of latest R6

End-to-End 4G Solutions for Mobile BWA WiMAX & LTE

Silicon Solutions

by

End-to-End 4G Solutions for Mobile BWA WiMAX & LTE

nfrastructure

interface over GRE tunneling towards the ASN-GW. RNU4000BS unit supports 4x4 MIMO antennas and can cover either one, two or four sectors using a single unit with 4X1watt antenna output. Using these options, the operator can choose between having a coverage based or a capacity based deployment. As a result, a significant OPEX and CAPEX saving is achieved by reducing the required number of sites requisition to provide high-quality tailored performance for a given area.

RNU2000RS Fully Outdoor Relay StationRuncom’s full outdoor Relay Station is a perfect device for enhancing your WiMAX network coverage. The device utilizes a F1/F2 regenerating relay scheme over a wave 2 compliant IEEE802.16e standard. The unit features transmission power of (2x1W) on a 2x2 MIMO configuration in the access radio link (RS to MS) and 1x1W transmission power in the backhaul radio link (RS to BS). The unit supports the 2.3–2.7 GHz and the 3.4–3.6GHz bands and provides fast, flexible, cost-effective WiMAX network deployment solutions where increased capacity and coverage is required.

RN-ASN-SG-X Runcom ASN GatewayRN-ASN-SG, Runcom ASN gateway, is a key component in Runcom’s end-to-end solution, which provides a feature rich, cost effective and modular solution specifically for public nationwide wireless 802.16e networks. The ASN gateway includes a set of core technology modules that have been developed by Runcom as part of an integrated solution, or a standalone product. RN-ASN-SG

terminates the network interfaces from the base stations via the standard WiMAX R6 interface, controls users sessions (authentication, authorization accounting and security), and handles routing and mobility. The ASN gateway provides a value added service layer on top of its standard WiMAX support. It provides a unique and cost effective provisioning with user interactive communications through existing portals. It manages users sessions with dynamic service profiles implemented on an individual user basis and it includes a wide service portfolio to be offered by the wireless operators to their subscribers.

RN-NOC-XXX Runcom Network Operating Center RN-NOC-XXX Runcom NOC (Network Operation Center) solution addresses the interface between the Access Service Network (ASN) and a wide array of Internet services offered by the Mobile WiMAX operator. This NOC solution provides a flexible connectivity for residential, mobile subscribers, secure and safe service for SOHO, SME and corporate customers. The Operator NOC provides a variety of services including VoIP, VOD, IPTV, email, anti-spam, anti-virus, Web browsing, location based service and so on. The NOC solution provides various sizing and scalability. Runcom NOC proven solution is fully compliant with existing related Standards (such as 802.16e) and related RFCs. Runcom NOC includes all required elements such as: AAA Radius Server, Billing system, Management (CRM, NMS), Value- Added Services (VAS), ASN-GW, Firewall, Operator Portal, DHCP Server , DNS Server and Backbone switches & Core routers.

RN-CP-NOC Runcom Compact Network Operating Center RN-CP-NOC, Runcom Compact NOC is a cost effective system that provides a full network solution within one box for wireless cells. It is based on Runcom distributed ASN service gateway hardware and provides a feature rich, cost effective and modular solution specifically for small 802.16e wireless networks. The Compact NOC includes ASN gateway functionality, IP allocation service, CPE authentication capabilities and WiMAX service configuration to allow full network operation without additional NOC entities (servers). The RN-CP-NOC is a unique offer for early deployment phases. As the network grows, with a minimum effort, migration to

Runcom’s RN-NOC-XXX may be performed.

NMS Network Management System Runcom Network Management System (NMS) provides a robust set of tools for end-to-end maintenance, monitoring, and troubleshooting of Runcom BS and CPE network elements. The

PWS Portable WiWi SolutionRuncom’s PWS is a perfect solution for a quick and cost affective deployment of a portable WiWI (WiMAX/WiFI) network. The system comprises of Runcom’s end-to-end 802.16e network infrastructure (including Runcom’s base stations and NOC equipment) with an uniquely offered device: RNU-PW, A portable battery operated CPE device which serves as both a 802.16e-Wave 2 user terminal. This solution empowered by Runcom’s unique NOC architecture that supports multiple 802.11 users behind CPE. This enables low cost VOIP solution for both residential and business environments.

RNU300CAM EyeMAX WiMAX based Video Surveillance SystemRuncom’s RNU300CAM EyeMAX WiMAX based Video Surveillance System is a high quality state of the art video surveillance over WiMAX Fixed or Mobile infrastructure. The main applications of EyeMAX are remote transfer of high quality video and audio signals for applications such as: Mobile Video Surveillance, CCTV, Traffic Control, Video Monitoring, Home Land Security, Undercover Camera, Public Safety, Disaster Recovery, Military solutions. Various cameras are available such as: High Speed Dome Camera, IR Waterproof Camera, Indoor/Outdoor, PTZ and Buttons camera for spy and Special Forces. The EyeMAX system provides high performance video monitoring solution. It can support any video encoding formats as well as a wide array of algorithms such as motion detection, automatic object tracking, automatic zoom, and objects entering secured zone sensors and alarms. An integrated hard disk allows local storage of hundreds of hours of video together with DVR functionality for fast retrieval and analysis and multiple channel monitoring and playback. Content of interest can be immediately distributed to the ground troops for immediate action, per preconfigured distribution lists, priorities, and engagement protocols. Through its robust and friendly user interface, the system enables an easy to use WEB based remote control, maintenance, and configuration.

solution is based on Client/Server architecture and it enables network operators to efficiently and effectively manage the Runcom network through an intuitive and informative GUI based application. The NMS can be accessed from any computer on the network with an installed client. The NMS if rich with features like auto-discovery of network elements, graphical displays of user selected statistics, database back up and restore and many other.

RNU303-USB USB DongleRuncom’s RNU303-USB USB dongle enables nomadic or mobile connectivity to the internet with a simple and intuitive user experience. This device is compliant with IEEE802.16e Wave 2 profile. The device implements low-power consumption techniques that minimize the battery draining in laptop or mini-laptops. The unit supports the 2.3–2.7GHz and 3.4–3.7GHz frequency bands.

RNU300ETH-MIMO Residential Indoor CPERuncom’s RNU300ETH-SI / MI Residential indoor CPE is customer premises equipment for indoor deployment. It is designed for rapid and simple deployments, to be fitted by a residential user. The Runcom Residential indoor CPE ensures high service availability at enhanced ranges. The unit includes high gain MIMO antennas and demonstrates superior indoor coverage. This unit complies with IEEE802.16e Wave 2 profile and supports the 2.3–2.7GHz and 3.3–3.8GHz frequency bands.

RNU300ODU Residential Outdoor CPERuncom’s RNU300PoE Residential outdoor CPE is a customer premises equipment for outdoor deployment. It is designed for rapid and simple external deployment, to be fitted by trained personnel in relatively short period to save OPEX. The operator will deploy

the Runcom Residential outdoor CPE when specific service levels need to be guaranteed to the end customer. The unit is available in two form factors with 7 dBi or 15 dBi integrated antenna. The unit can operate in enhanced ranges in both LOS and NLOS conditions. This unit complies with IEEE802.16e Wave 2 profile and supports the 2.3–2.7GHz and 3.3–3.8GHz frequency bands.

RNU300WV 4G–TV Runcom’s RNU300WV 4G–TV is an innovative and featurerich set-top-box, designed for deployment in IPTV and Videoon- Demand infrastructure, using the WiMAX technologies provided by Runcom instead of wired and others wireless infrastructure. The product features MPEG–1/2, H.264, WMV9 and MPEG4 compression, which allows it to deliver high quality video streams over IP networks with low bandwidth utilization. The RNU300WV 4G–TV supports High-Definition video up to 1080p resolution which offers a more exciting viewing experience, especially on large format. This unit complies with IEEE802.16e-Wave 2 profile, and supports 2.3–2.7GHz & 3.3–3.8GHz bands.

RNU300WF 4G VoIP PhoneRuncom’s RNU300WF is a VoIP Phone enabling over WiMAX SIP phone functionalities. As an Integrated Access Device, the IP Phone can be directly connected to the IP network to provide basic accesses for POTS users. At the same time, this IP Phone is capable of Internet gateway and can access data stream, such as Email or internet browsing (with host PC). The IP Phone includes Speaker, Redial, Dial plan, Mute, Call duration display, Call history list and SIP features: Call hold/Retrieve, Call waiting, and Call transfer, 3-way calling MWI, Do Not Disturb, Call forwarding: Busy, No answer, Unconditional. This unit complies with IEEE802.16e – Wave 2 profile, and supports 2.3–2.7GHz & 3.3–3.8GHz bands.

RNU304MP Sting Dual WiMAX/WiFiRuncom’s RNU304MP is Dual mode WiMAX/WiFi handset that operates on WiMAX and conventional WiFi networks providing the best of breed. It is combining the latest and the fastest wireless mobile solutions, ensuring high throughput over WiMAX networks while delivering robust voice coverage on both WiMAX and WiFi networks. This unit complies with IEEE802.16e-Wave, and supports 2.3–2.4GHz, 2.49–2.69GHz & 3.4–3.6GHz bands.

Access

Vertical Solutions

Outdoor Camera

Internet

Monitor Control and Storage

WiMAX IP NetworkIndoor Camera

Runcom NMS Server

Real Time

Monitoring

Resource

Management

Network

Elements

Upgrde Tools

Device Fault

Management

Network

Performance

Tools

terminates the network interfaces from the base stations via the standard WiMAX R6 interface, controls users sessions (authentication, authorization accounting and security), and handles routing and mobility. The ASN gateway provides a value added service layer on top of its standard WiMAX support. It provides a unique and cost effective provisioning with user interactive communications through existing portals. It manages users sessions with dynamic service profiles implemented on an individual user basis and it includes a wide service portfolio to be offered by the wireless operators to their subscribers.

RN-NOC-XXX Runcom Network Operating Center RN-NOC-XXX Runcom NOC (Network Operation Center) solution addresses the interface between the Access Service Network (ASN) and a wide array of Internet services offered by the Mobile WiMAX operator. This NOC solution provides a flexible connectivity for residential, mobile subscribers, secure and safe service for SOHO, SME and corporate customers. The Operator NOC provides a variety of services including VoIP, VOD, IPTV, email, anti-spam, anti-virus, Web browsing, location based service and so on. The NOC solution provides various sizing and scalability. Runcom NOC proven solution is fully compliant with existing related Standards (such as 802.16e) and related RFCs. Runcom NOC includes all required elements such as: AAA Radius Server, Billing system, Management (CRM, NMS), Value- Added Services (VAS), ASN-GW, Firewall, Operator Portal, DHCP Server , DNS Server and Backbone switches & Core routers.

RN-CP-NOC Runcom Compact Network Operating Center RN-CP-NOC, Runcom Compact NOC is a cost effective system that provides a full network solution within one box for wireless cells. It is based on Runcom distributed ASN service gateway hardware and provides a feature rich, cost effective and modular solution specifically for small 802.16e wireless networks. The Compact NOC includes ASN gateway functionality, IP allocation service, CPE authentication capabilities and WiMAX service configuration to allow full network operation without additional NOC entities (servers). The RN-CP-NOC is a unique offer for early deployment phases. As the network grows, with a minimum effort, migration to

Runcom’s RN-NOC-XXX may be performed.

NMS Network Management System Runcom Network Management System (NMS) provides a robust set of tools for end-to-end maintenance, monitoring, and troubleshooting of Runcom BS and CPE network elements. The

PWS Portable WiWi SolutionRuncom’s PWS is a perfect solution for a quick and cost affective deployment of a portable WiWI (WiMAX/WiFI) network. The system comprises of Runcom’s end-to-end 802.16e network infrastructure (including Runcom’s base stations and NOC equipment) with an uniquely offered device: RNU-PW, A portable battery operated CPE device which serves as both a 802.16e-Wave 2 user terminal. This solution empowered by Runcom’s unique NOC architecture that supports multiple 802.11 users behind CPE. This enables low cost VOIP solution for both residential and business environments.

RNU300CAM EyeMAX WiMAX based Video Surveillance SystemRuncom’s RNU300CAM EyeMAX WiMAX based Video Surveillance System is a high quality state of the art video surveillance over WiMAX Fixed or Mobile infrastructure. The main applications of EyeMAX are remote transfer of high quality video and audio signals for applications such as: Mobile Video Surveillance, CCTV, Traffic Control, Video Monitoring, Home Land Security, Undercover Camera, Public Safety, Disaster Recovery, Military solutions. Various cameras are available such as: High Speed Dome Camera, IR Waterproof Camera, Indoor/Outdoor, PTZ and Buttons camera for spy and Special Forces. The EyeMAX system provides high performance video monitoring solution. It can support any video encoding formats as well as a wide array of algorithms such as motion detection, automatic object tracking, automatic zoom, and objects entering secured zone sensors and alarms. An integrated hard disk allows local storage of hundreds of hours of video together with DVR functionality for fast retrieval and analysis and multiple channel monitoring and playback. Content of interest can be immediately distributed to the ground troops for immediate action, per preconfigured distribution lists, priorities, and engagement protocols. Through its robust and friendly user interface, the system enables an easy to use WEB based remote control, maintenance, and configuration.

solution is based on Client/Server architecture and it enables network operators to efficiently and effectively manage the Runcom network through an intuitive and informative GUI based application. The NMS can be accessed from any computer on the network with an installed client. The NMS if rich with features like auto-discovery of network elements, graphical displays of user selected statistics, database back up and restore and many other.

RNU303-USB USB DongleRuncom’s RNU303-USB USB dongle enables nomadic or mobile connectivity to the internet with a simple and intuitive user experience. This device is compliant with IEEE802.16e Wave 2 profile. The device implements low-power consumption techniques that minimize the battery draining in laptop or mini-laptops. The unit supports the 2.3–2.7GHz and 3.4–3.7GHz frequency bands.

RNU300ETH-MIMO Residential Indoor CPERuncom’s RNU300ETH-SI / MI Residential indoor CPE is customer premises equipment for indoor deployment. It is designed for rapid and simple deployments, to be fitted by a residential user. The Runcom Residential indoor CPE ensures high service availability at enhanced ranges. The unit includes high gain MIMO antennas and demonstrates superior indoor coverage. This unit complies with IEEE802.16e Wave 2 profile and supports the 2.3–2.7GHz and 3.3–3.8GHz frequency bands.

RNU300ODU Residential Outdoor CPERuncom’s RNU300PoE Residential outdoor CPE is a customer premises equipment for outdoor deployment. It is designed for rapid and simple external deployment, to be fitted by trained personnel in relatively short period to save OPEX. The operator will deploy

the Runcom Residential outdoor CPE when specific service levels need to be guaranteed to the end customer. The unit is available in two form factors with 7 dBi or 15 dBi integrated antenna. The unit can operate in enhanced ranges in both LOS and NLOS conditions. This unit complies with IEEE802.16e Wave 2 profile and supports the 2.3–2.7GHz and 3.3–3.8GHz frequency bands.

RNU300WV 4G–TV Runcom’s RNU300WV 4G–TV is an innovative and featurerich set-top-box, designed for deployment in IPTV and Videoon- Demand infrastructure, using the WiMAX technologies provided by Runcom instead of wired and others wireless infrastructure. The product features MPEG–1/2, H.264, WMV9 and MPEG4 compression, which allows it to deliver high quality video streams over IP networks with low bandwidth utilization. The RNU300WV 4G–TV supports High-Definition video up to 1080p resolution which offers a more exciting viewing experience, especially on large format. This unit complies with IEEE802.16e-Wave 2 profile, and supports 2.3–2.7GHz & 3.3–3.8GHz bands.

RNU300WF 4G VoIP PhoneRuncom’s RNU300WF is a VoIP Phone enabling over WiMAX SIP phone functionalities. As an Integrated Access Device, the IP Phone can be directly connected to the IP network to provide basic accesses for POTS users. At the same time, this IP Phone is capable of Internet gateway and can access data stream, such as Email or internet browsing (with host PC). The IP Phone includes Speaker, Redial, Dial plan, Mute, Call duration display, Call history list and SIP features: Call hold/Retrieve, Call waiting, and Call transfer, 3-way calling MWI, Do Not Disturb, Call forwarding: Busy, No answer, Unconditional. This unit complies with IEEE802.16e – Wave 2 profile, and supports 2.3–2.7GHz & 3.3–3.8GHz bands.

RNU304MP Sting Dual WiMAX/WiFiRuncom’s RNU304MP is Dual mode WiMAX/WiFi handset that operates on WiMAX and conventional WiFi networks providing the best of breed. It is combining the latest and the fastest wireless mobile solutions, ensuring high throughput over WiMAX networks while delivering robust voice coverage on both WiMAX and WiFi networks. This unit complies with IEEE802.16e-Wave, and supports 2.3–2.4GHz, 2.49–2.69GHz & 3.4–3.6GHz bands.

Access

Vertical Solutions

Outdoor Camera

Internet

Monitor Control and Storage

WiMAX IP NetworkIndoor Camera

Runcom NMS Server

Real Time

Monitoring

Resource

Management

Network

Elements

Upgrde Tools

Device Fault

Management

Network

Performance

Tools

4G KiOSK The 4G KiOSK is a Standalone Independent and complete “self contained” mobile BWA System. It is designed to provide communication solutions in places without electricity, struck zone disasters. The site can be rapid establishment and include WiMAX Infrastructure, NOC, Satellite Backhaul or Microwave, Wind/Solar Hybrid Power System (or Other Power Generator). The system supply to the subscribers Triple play mobile and fixed services as Internet Services, Voice over IP services, Video streaming Services and Value added Services (Surveillance, Distant Learning, VOD, etc).

RNF2001 IEEE802.16e-2005 PHY/MAC SiliconThe RNA2001 mobile WiMAX Silicon for MACRO and PICO Base Stations is an advanced implementation of the IEEE802.16e-2005 standard modem and low level MAC layer. The device is fully compliant with the WiMAX Forum “System Profile” and Wave-2 functionalities. The device supports advanced features beyond the WiMAX Forum recommendations such as receive beam forming, transmit beam forming, uplink sounding, close Loop MIMO and Multicast/Broadcast Services . The RNF2001 is a perfect solution for flexible implementations for a variety of applications including:

Micro/Macro BS: Supports both Single SC (Sector Card) and Multi-SC, with advanced networking capabilities and the

ability to support a large numbers of concurrent users, within a wide coverage range.

PICO BS: A small and inexpensive mobile WiMAX solution, targeted for short to medium range coverage in indoor or outdoor deployment

RNA300 IEEE802.16e Rev 2 PHY/MAC SoCThe RNA300 is a high performance and highly – integrated Soc that provides an optional solution for Mobile Subscriber Systems (MSS) that want to employ IEEE802.16e Rev 2 WiMAX functionality. THE RNA 300 is self-contained and only requires a handful of external components to create a wireless endto- end Mobile WiMAX solution for interfacing between WiMAX base stations (BSs) and MSS. The RNA300 utilizes state-of-the art System-on-Chip (SoC) technology. It contains analog and digital mixed-signals cores and an embedded ARM 11 CPU. This provides a highly-integrated, single-chip solution in addition to integration support for a single chip RF, Base-Band, WI-Fi and VoIP at a very low-cost. The chip incorporates both PHY and MAC layers for implementation of OFDMA terminals that comply with the IEEE 802.16e standard. It contains advanced features, such as: MIMO Matrix B, collaborative MIMO, closed-loop MIMO (Matrix 4X2), beam-forming support, higher throughput (50Mbps), low power consumption, HARQ type 4, as well as application processor functions.

Reference Design KitsRuncom’s base station and CPE products are available for OEM-s and ODM-s in a form of a reference design kit. A complete production database is available with a variety of RF solutions including 1.4–1.8 GHz band, 2.4–2.7 GHz band and 3.3–3.8 GHz band.

Founded in 1997, Runcom Technologies develops, manufactures and markets superior End-to-End 4G Solutions including fixed and mobile terminals, base stations, ASN gateways, Network operating Centers (NOC) and Value Added Services that target the emerging 4G market, enabling the delivery of enhanced communications services to cellular phones and other mobile and fixed devices. Runcom also provides state of the art silicon solutions to OEM’s and ODM’s worldwide.A privately owned company headquartered in Rishon Lezion, Israel, Runcom is the recognized pioneer of OFDMA® (Orthogonal Frequency Division Multiple Access) NLOS (Non-Line of Sight) technology, which has been adopted by ETSI for wireless telecom applications and by the WiMAX Forum® for its IEEE 802.16e standard.Runcom’s seasoned management team and high standards of excellence together with its talented and highly committed engineering workforce are cultivating the leading standing of the company in the OFDMA solutions arena and its prominent involvement in the WiMAX Forum – all position it competitively to lead the way in providing 4G solutions for lucrative, mobile Wireless MAN applications in a variety of markets.

Please contact us:Runcom Technologies Ltd.info@runcom.com Tel: +972-3-9428888

For more information on Runcom’s products see our website: www.runcom.com

RNU4000BS Base stationRuncom’s RNU4000BS Base Station is compliant with IEEE 802.16e Wave 2 profile and WiMAX forum requirements for mobile, broadband wireless and metropolitan access networks. The Base Station performs all the required capabilities of the Mobile BS next generation such as: WiMAX Modem PHY and MAC functions, SNMP based management protocol with advanced alarm and events system with full support of latest R6

End-to-End 4G Solutions for Mobile BWA WiMAX & LTE

Silicon Solutions

by

End-to-End 4G Solutions for Mobile BWA WiMAX & LTE

nfrastructure

interface over GRE tunneling towards the ASN-GW. RNU4000BS unit supports 4x4 MIMO antennas and can cover either one, two or four sectors using a single unit with 4X1watt antenna output. Using these options, the operator can choose between having a coverage based or a capacity based deployment. As a result, a significant OPEX and CAPEX saving is achieved by reducing the required number of sites requisition to provide high-quality tailored performance for a given area.

RNU2000RS Fully Outdoor Relay StationRuncom’s full outdoor Relay Station is a perfect device for enhancing your WiMAX network coverage. The device utilizes a F1/F2 regenerating relay scheme over a wave 2 compliant IEEE802.16e standard. The unit features transmission power of (2x1W) on a 2x2 MIMO configuration in the access radio link (RS to MS) and 1x1W transmission power in the backhaul radio link (RS to BS). The unit supports the 2.3–2.7 GHz and the 3.4–3.6GHz bands and provides fast, flexible, cost-effective WiMAX network deployment solutions where increased capacity and coverage is required.

RN-ASN-SG-X Runcom ASN GatewayRN-ASN-SG, Runcom ASN gateway, is a key component in Runcom’s end-to-end solution, which provides a feature rich, cost effective and modular solution specifically for public nationwide wireless 802.16e networks. The ASN gateway includes a set of core technology modules that have been developed by Runcom as part of an integrated solution, or a standalone product. RN-ASN-SG