Embed Size (px)
Citation preview
FREE MATERIAL ANALYSIS Over 100 years of proven correlation between lab test results and actual field performance:
Experienced Lab Technicians and Application Engineers recommend machine size, settings and screen openings to ensure accurate, efficient separations
Comprehensive separation analysis
Summary report provides data to support ROI decisions
Over 6,000 Rotex® screeners are installed worldwide
Rotex® Screeners are designed and built to meet your specific requirements:
Low angle, Gyratory-Reciprocating Motion gently sifts the material
Multi deck Rotex screeners produce several grades of product in one machine
Totally enclosed with effective sealing for clean operation
Durable construction and wear-resistant impact areas for long life and continuous operation
Proven Performance, Ease of Maintenance, Industry Standard
“ Rotex screeners have proven themselves for years and years. They are the industry standard for many applications. They are cost-effective and give me the separations I want and need.”
Plant Manager - Recycling Industry
The following specifications are for Rotex General-Purpose Screeners of standard construction and range from one through five decks. Overall dimensions may vary depending on mounting and drive head.
* Indicates two deck independently fed. Total area is 2 x nominal area per surface.
Classic Rotex performance - quality separations, high yield, aggressive screen cleaning, long-lasting.
PR
OD
UC
T B
UL
LE
TIN
| RO
TE
X® S
CR
EE
NE
R
ROTEX® Automatic Tensioning Type-A Screener
1132013221321341
34213432*
81832*521581532*732*
12320232234282
84285252
522582
572272272
32332033438353
84352358373
32434454
704
55
6.612.515.623.333.335.023.350.033.360.080.050.080.05.1
12.515.623.333.335.041.750.060.072.080.080.0
100.011.312.523.333.333.335.050.072.080.08.9
20.033.350.0
33.3
0.61.21.42.23.13.32.24.63.15.67.44.67.40.51.21.42.23.13.33.94.65.66.77.47.49.31.01.22.23.13.13.34.66.77.40.81.93.14.6
3.1
0.522222233
7.57.57.5100.5222335
7.57.57.57.510102223
7.53
7.57.51022
7.510
7.5
0.371.51.51.51.51.51.52.22.25.55.55.57.5
0.371.51.51.52.22.23.75.55.55.55.57.57.51.51.51.52.25.52.25.55.57.51.51.55.57.5
5.5
8010810213616913413719317423122619221677
110108137174164179206227213222219275136117138174196175207213216121136211
210
20322743259134544293340434804902442058675740487754861956279427433480442041664547523257665410563955636985345429723505442049784445525854105486307334545359
5334
3638394042455154545651617333444447555655525660587272444852576161616074475262
60
910965991
1016106711431295137213721422129515491854838
111811181194139714221397132114221524147318291880111812191321144815491549154915241880119413211575
1524
303746464767527357779777
1023041515250767780778988
102893941525660627789
102315260
60
762940
11681168119417021321185414481956246419562591762
104112951321127019301956203219562261223525912261991
10411321142215241575195622612591787
13211524
1524
26394749547154786184
10485
1082942525561818183848988
108893942546165668489
109335564
64
660991
11941245137218031372198115492134264221592743737
106713211397154920572057210821342261223527432261991
10671372154916511676213422612769838
13971626
1626
60017001800190022002200230053004100670072007400
13500500
1800190022003200530045008600900092007400
117001240018001900220043006900560090009200
13100170022006800
8500
272771816862998998
1043240418593039326533566122227816862998
145124042041390040824172335653065624816862998
195031292540408241725941771998
3084
3855
1
2
3
45
No. of Screen
Surfaces
General purpose Model
No. ft2 m2 hp kW in mm in mm in mm in mm lb kg
Normal Area per Surface
MotorPrincipal Dimensions
A B C DShipping Weight
Contact Rotex for details
ScreenerROTEX®
PR
OD
UC
T B
UL
LE
TIN
| RO
TE
X® S
CR
EE
NE
R
ROTEX® Specifications
Fines Product Overs
IncomingMaterial
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
To find your local ROTEX representative visit www.rotex.com
PR
OD
UC
T S
HE
ET
|A
PE
X™
SC
RE
EN
ER
APEX™ Features
To find your local ROTEX representative visit www.rotex.com
Ergonomic and light-weight design reduces the needfor multi-person maintenance crews and overheadlifts to remove top cover for screen changes
Reduced down-time, increased screening flexibilitywith a pre-tension screen panels accessed throughside-mounted doors
Easy to access, quick to change discharge sleevesmounted in front of the unit
Unique Rotex Gyratory Reciprocating Motion forexceptional product recovery efficiency
APEX™ BenefitsGyratory Reciprocating motion
Add Aspiration for Additional Cleaning of your material
For additional cleaning functionality, add the new Aspiration Hood Unit to your APEX.This unit aids in de-dusting and removing additional light-weight material that may floatto the top as your product moves across the screening bed. Unlike other screeners withhoods that move over stationary beds of material, the APEX Aspiration Hood is part ofthe unit. As the Rotex Gyratory Reciprocating Motion agitates the material, light-weightelements and dust are encouraged to rise to the top where it is easily removed throughvacuum. The Airflow can be adjusted at two points to ensure maximum productivityand efficiency in further cleaning your material.
installation Options
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Floor Mounting
Because the ROTEX counterbalanced drive has low transmitted forces, the APEX canbe mounted directly on the floor or on an elevated structural steel framework.
Cable Suspension
APEX Screeners can be cable-suspended from the four corners of the machine,thereby isolating out-of-balance screening forces from the surrounding structure.Accurate counterbalancing of the APEX Screener makes this type of installation optionpossible. The APEX Screener can be suspended from a floor-mounted cable supportstand or existing overhead structure.
Contact your local ROTEX representative who will recommend a standfor any specific application.
The Gyratory Reciprocating Motion graduallydiminishes along the length of the machine toan elliptical path and finally to an approximatestraight line motion at the discharge end.
Circular motion at the feed end• Spreads the material across the full width
of the screen surface• Stratifies the material• Conveys material forward
Changing to elliptical motion at the centre• Long stroke elliptical action• Promotes stratification• Conveys material at high capacity
Straight line motion at thedischarge end• Near linear sifting motion• Removes near size particles• Higher screening efficiency• No vertical component ensures material is
in constant contact with the screen surface
ReducedMaintenanceEasy access to discharge sleeves for reducedmaintenance time
Positive Screen CleaningBouncing balls keep screenopenings clear, maintainingefficiency and capacity
Incoming Material
Fines Product Overs Ergonomic DesignLarge doors on the side of the machine allow easyaccess which results in screen changes of less than 2 minutes per panel with a 1 man operation
APEX™ BenefitsIncoming Material
Fines Product Overs
Installation Options
The Gyratory-Reciprocating Motion gradually changes along the length of the machine to an elliptical path and finally to an approximate straight line motion at the discharge end.
Circular motion at the feed end• Spreads the material across the full width of the screen surface • Stratifies the material• Conveys material forward
Changing to elliptical motion at the middle• Long stroke elliptical action• Enhances stratification• Conveys material at high capacity
Straight line motion at thedischarge end• Linear sifting motion• Removes near-size particles• Improves screening efficiency• No vertical component ensures material is in constant contact with the screen surface
Compensating ClampsPatented, self-adjusting clamps ensure uniform sealing of cover and screen decks
Long-life and trouble-free operation
Proven Rotex Gyratory-Reciprocating Motion for unmatched product recovery
Easy maintenance and access to OEM replacement parts and screens
Experienced application experts ensure your screen selection and machine settings produce maximum recovery
Quick Screen ChangesPatented Quick Snap tension clips mean rapid screen changes and less downtime
LongevityHeavy duty all metal construction to withstand harsh environments
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining efficiency and capacity.
ROTEX® Benefits
Gyratory-Reciprocating Motion Rotex® Benefits
Cable SuspendedFloor Mounted
Features
Wide range of sizes from 9 sq ft to 110 sq ft (0.5m2 to 10m2) of screen surface
Replaceable inner and outer seals to control dusting
Rotex reputation for quality, durability and ease of maintenance
Cost-effective construction and material options
Rotex Screeners produce the highest yields of consistent on-spec product
To find your local Rotex representative visit www.rotex.com
ROTEX® Features
