Upload
anirban687
View
287
Download
0
Embed Size (px)
Citation preview
The rotary tippler designed for unloading broad-guage open railway by inverting thewagon by inverting on its own centre of gravity through an angle of 1700, therebydischarging its contents into hopper below rail. (The tippler is designed to handle wag-ons having a gross load up to 110 tonnes, height from 2,250 mm (min) to 3,735 mm(max) and a maximum overall width of 3,500 mm. The tippler ensures handling ofwagons, without any damage.
The tippler consists of two circular rings, a platform with travel rails, support rollers,two girders as well as clamping device, which retains the wagon from the top as well asfrom the side during tippling.
The tippler is driven by a dirve unit located on one side of the tippler. The driver unitconsists of motor - with flexible coupling, thruster operated brake, helical gearbox,pinion and toothed rings. The type of drive is decided on the number of tips/hour re-quired.
The complete hydraulic equipment, including the motor and the oil tank are located onthe tippler itself and rotate along with the tippler. Top clamps and side beam are hydrau-lically operated. Wagon is clamped before tippling operation. The top clamps and sidebeam are lined with rubber pads throughout the length of the tippler which reduces thepressure on wagon walls.
A loaded wagon is placed on the tippler platform by an in-haul beetle or other means.after correct placement is achieved, the in-haul beetle returns and clears the tipplertable. The hydraulic system is now actuated, and the upper and lateral beams rest onthe wagon coping and side walls. The hydraulic system incorposrates a pressure reliefwhich balances the pressure of the wagon springs, thus avoiding any damage to thewagon.
The tipping rate can be varied to suit particular plant requirements, up to maximum ofabout 60 wagons per hour, To achieve a throughput of more than 12 wagons per hour, itis necessary to incorporate integrated wagons handling equipment in the form of abeetle charger.
Dust Suppression
The dust suppression systems can also be embodied in the rotary wagon tippler toreduce dust nuisance during tipping.
Weighing
An integrated electronic weighbridge records the gross and tare weights of wagons.The weighbridge includes a printer and a recorder.
A load cell weighbridge can be incorporated with the tippler to print gross, tare and nettweights as well as other information.
Vibrators
Electrically or pneumatically operated vibrators can be fitted to the top clamps toassist in the complete discharge to sticky materials from wagon.
WEST ZONE
AHMEDABAD
Ph. No. : +91-79-6406683,84,85,86
Fax No. : +91-79-6401363
E-mail : [email protected]
MUMBAI
Phone : +91-22-2821315, 2820725,
2821365, 2870792, 2815693
Fax : +91-22-2870791
E-Mail : [email protected]
PUNE
Phone : +91-20-4330646
Fax: +91-20-4330646
Email : [email protected]
VALLABH VIDYANAGAR
Phone : +91-2692-30168, 31082,
31419, 31125
Fax : +91-2692-36508
E-Mail : [email protected]
EAST ZONE
CALCUTTA
Phone : +91-33-4761861, 4760876,
4760904, 4760926
Fax : +91-33-4761831
E-Mail : [email protected]
ASANSOL
Phone : +91-341-205901, 202038, 211726
Fax : +91-341-202038
E-Mail : [email protected]
DHANBAD
Phone : +91-326-306283, 302320
Fax : +91-326-302320
E-Mail : [email protected]
JAMSHEDPUR
Phone : +91-657-428138, 435382
Fax : +91-657-428015
E-Mail : [email protected]
BILASPUR
Phone : +91-7752-47347, 28922, 24122
Fax : +91-7752-23188
E-Mail : [email protected]
CENTRAL ZONE
NAGPUR
Phone : +91-712-540771, 531601
Fax : +91-712-531450
E-Mail : [email protected]
SOUTH ZONE
CHENNAI
Phone : +91-44-4349237, 4349497,
4349643, 4322455
Fax : +91-44-4349643
E-mail : [email protected]
BANGALORE
Phone : +91-80-2260219, 2281834, 2250082
Fax : +91-80-2281834
E-Mail : [email protected]
SECUNDERABAD
Phone : +91-40-7844748, 7845250, 7846984
Fax : +91-40-7848317
E-Mail : [email protected]
NORTH ZONE
NEW DELHI
Phone : +91-11-3414339,
3414341, 3414069, 3414634
Fax : +91-11-3709046
E-Mail : [email protected]
CORPORATE OFFICE
Elecon Engineering Company Ltd.Anand Sojitra Road, Vallabh Vidyanagar - 388120, Gujarat, India.
Phone : 91-2692-31170, 31070, 31120, Fax : 91-2692-36559E-mail: Gear division : [email protected]
MHE division : [email protected]
INTERNATIONAL BUSINESS DIVISION
Elecon Engineering Company Ltd.418, 4th floor, World Trade Centre,
Babbar Road, New Delhi - 110 001.Phone : 11-341-4339, 341-4341, 341-4069, 341-4634,
Fax : 11-370-9046 E-mail: [email protected].
SINGAPORE OFFICE
Elecon Singapore Pte. Ltd.10 Anson Road, #19-13 International Plaza,
Singapore - 079903.Phone : 65-227-8258, 65-227-8425, Fax : 65-227-8942
E-mail: [email protected]
SELLING AGENT
EMTICI Engineering Ltd.,Phone : +91-2692-30168, 31082, 31419, 31125
Fax : +91-2692-36508E-Mail : [email protected]