Rolleri scule abkant - press brake tooling catalogue SM.pdf

ww

w.s

m-te

ch.ro

PRESS BRAKE TOOLSFAST CLAMPING SYSTEMS, ADAPTERS,

SERVICE/MODIFICATION, SHEAR BLADES, ACCESSORIES

www.sm-tech.ro

2 3

ROLLERI

www.rolleritools.com · Tel.: +39 05 23 87 09 05 · [email protected]

… to the new Rolleri catalogue!

Rolleri is one of the few real manufacturers of press brake tools – not a reseller and not a dealer. Therefore we emphasize great importance as being producer of press brake tools to bring you further advantages.

• no margin division

• direct access to the production

• direct communication, not only by specifi c and special bending tools.

• Competent and truthful statement about prices and delivery times – without tedious queries!

Convince yourself of our service and quality of tools!

We at Rolleri, have a wide stock ranging over more than 20,000 press brake tools. Therefore, we hold one of the largest in house stocks in all of Europe. For you this means a vast amount of tools to choose from ready to be ship-

ped all around the world.

Look for this symbol in the catalogue!

The Rolleri team is made up of all ages. We are innovative, dynamic and experienced, with consistency and harmony. Our mission is to bring you the best results in tool produc-tion. At Rolleri teamwork is the key to achieve outstand-ing customer service, research and development, great warehouse effi ciency, and vast productivty.

The exceptional atmosphere in our facilities always has a positive impact on our products.

We understand that fi nding the right tool for the right application is of your importance. Thus, we have invested hard work into our quality service:

• Consulting,

• Technical assistance,

• Training for your bending specialists,

this is our daily business bringing you great support!

Call us under: +39 05 23 87 09 05,send us an e-mail at: [email protected] or check out our website: www.rolleritools.com

All production phases are certifi ed and up to quality check standards and safety regulations. Thereby we guarantee you consistent high quality with modern CNC-machines.

All tools are laser marked with a serial number. Thus, al-lowing every single tool to be identi-fi ed and easily tracked for reproduc-tion.

This is what we call accurate repitition.

THE COMPANY

WELCOME …

THE WAREHOUSE

THE TEAM THE SERVICE

THE PRODUCTION

Since 1987 we have been producing standard and special tooling. The family owned company (Francesco and Marco Rolleri) can nowadays be considered one of the largest press brake tooling manufacturers in Europe. We are internationally available with our branches Rolleri Bra-sil, Rolleri USA, Rolleri India, Rolleri Deutschland GmbH, Rolleri China, Rolleri Ukraine and Rolleri Benelux, for you to utilize our global experiance and footprints.

We o� er fast and reliable service through our partners in all of Europe. In 2012, we have completely restructured our facilities internally. The focus of direct sales structures in the individual countries has greatly improved. We present to you, a new expanded portfolio, a signifi cantly enlarged stock, new corporate design, and a completely new catalog that you now hold in your hands. Our prom-ise to an alternative for you Worlwide.

… also this is customer service: Rolleri provides you with immediate production after a purchase has been made to ensure the fastest delivery time!

Company Presentationwww.rolleritools.com/videos/company-rolleri

Rolleri Videos

www.sm-tech.ro

4 5

ROLLERI

QuickLock

ROL100


Rolleri manufactures all tools in their own production fa-cilities. We put great importance into our precision grind-ing, guaranteeing accurate reproduction of tools, exact concurrency. We induction harden all tools at 54-60 HRc to get the best results for your punches and dies. Each tool is subjected to quality control and then provided with a serial number to simplify and guarantee tracking.

THE PRESS BRAKE TOOLS

Rolleri produces for many press brake manufacturers the clamping systems - whether they are hydraulic, pneu-matic, or manual.

Our new QuickLock-System, compatible for our Rolleri Type R2 or our new ROL 100 for Rolleri Type R1, are all new developments from Rolleri which are manufactured in our production facilities.

INNOVATIONS

The raw material is obtained from qualifi ed suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength.

THE RAW MATERIAL

Besides constructing many special tools, our research and development team also innovates special clamping sys-tems which increases your productivity. Technicians and Engineers develop for you solutions which are economic and practical.

We work with highly complex 3D simulation models and are capable to create bending examples of various profi les.

Inquire with us today!

THE CONSTRUCTION

An extra quatlity control department reviews and tests every single tool after a complete production cycle.

Every tool is given a serial number and batch number, after being carefully examed. This process guarantees a 100% retracing possibility of the tool.

Of course Rolleri also guarantees accurate reproduction, high-quality material, induction hardening, and precision grinding.

THE QUALITY CONTROL

Rolleri ISO 9001:2008 certifi ed.

To be your choice supplier means much more to us; together we can fi nd the best and most economic tool and develop a vast number of bending solutions.

We also o� er training for your employees in the bending department. These are qualities, where we are glad to assist you along with our extravagant number of bending

products.

THE QUALITY

Professional Bending

www.sm-tech.ro

Compatibility

With Adapter-Systems the tools Rolleri Type R1-RX are also applicable on all other press brake machines.

Tools Rolleri Type R1are compatible with press brake machines from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

Tools Rolleri Type R2are compatible with press brake machines from:Hämmerle-Bystronic, LVD, Trumpf or onpress brakes with System NSCL(New Standard Clamping)

Tools Rolleri Type R3are compatible with press brake machines from:- Bystronic-Beyeler RFA- Bystronic-Beyeler RF- Bystronic-Beyeler R- Bystronic-Beyeler S

Tools Rolleri Type RXare compatible with press brake machines from:EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc.

PUNCHES ROLLERI TYPE R1

DIES ROLLERI TYPE R1


ROLLERI MARK FREE BENDING

ROLLERI SPECIAL AND HEAVY DUTY TOOLS


TOOLS ROLLERI TYPE RX

ROLLERI DIES ROLLA-V

ROLLERI CLAMPING SYSTEMS

ROLLERI SERVICE / MODIFICATIONS


ROLLERI ADAPTERS

ROLLERI SHEAR BLADES / ACCESSORIES


www.sm-tech.ro

1R1

Content Explanation 10 - 11

90° Punches 12 - 13

90° Segmented Punches with Mobile Horns 13

88° Punches 14 - 18

88° Segmented Punches with Mobile Horns 18

88° Punches for closed pro� les 19

85° Punches 20 - 21

75° Punches 22

70° Punches 22

60° Punches 23 - 24

45° Punches 25

35° Punches 26

30° Punches 26

26° Punches 27

28°/24° Hemming tools 28

Z-Pro� le Tools 29

Radius tools 30 - 33

Hemming tools 33

Punch extensions / Intermediates 34 - 35

Intermediates, Heavy duty 35

Punch adapters 35


Punches Rolleri Type R1 are compatible with press brake machines from:ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

With Adapter-Systems the punches Rolleri Type R1 are also applicable on all other press brake machines.

Compatibility

www.sm-tech.ro

10 11

R1 R11

R1

A6

A41

A7

A42

A1

A9

A813

13

7

8,4

3,5

30H

R

α

13

10

7

2,5

30°

3,5

3022

13 8,4

13

14

7

43,5

630

13 8,4

13

14

7

43,5

6

30

13 8,4 25

13

14

74

6

30

13

14

74

6

302530

13 7

13 7

45°

430

105

15

805

100 100

50402015

10100

370

800

100

100300

16550402015

10

795

100250

100100

50454035302520

BR

H

20R 25

9

30R 20

120°

13

35R 5

1035

25

R 10

1020

20

R 8

12 18

30R 5

1235

1 2 3 4 5 6

495

170100 50 45 40 35 30 25

500

100300

100

835 mm

525 mm

415 mm

900 mm

ROLLERI TYPE R1ROLLERI TYPE R1

Please ask for delivery time!

1 kg = 2.20 Pounds (lb) = 35.27 Ounzes (oz)100 mm = 3.94 Inch (in) = 0.33 Feet (ft)

Articles on stock – Please note that delivery time depends on your location.

Article on stock www.rolleritools.com · Tel.: +39 05 23 87 09 05 · [email protected]

Punches Rolleri Type R1 are:• compatible with press brake machines from:

ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hin-dustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

• also applicable on all other press brake machines with adapter-systems (see pages 212-217).

The raw material is obtained from quali� ed suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength.

• Specifi cations for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

• own production facilities (no reseller or dealer)• tracking of every tool possible, with a unique serial number on every article after the quality control check. • precision grinding (tolerance of +/-0.01 mm)• guaranteed tool reproduction • exact parallelism • precise, consistent working height• tang retrofi tting and modifi cations possible (see pages 248-249) • very large stock availability

Material TypeMechanical resistance of the material

and the tool bodyHardness of the material and the tool body

Hardness of the operating surfaces after induction hardening

42CrMo4 900-1150 N/mm2 29.1 - 36.9 HRC 54 - 60 HRCC45 560-710 N/mm2 12 - 15.5 HRC 54 - 60 HRC

All punches Rolleri Type R1:• are standardized with a 8.4 x 3.5 mm safety groove,

that keeps the tool from falling out.• depending on the clamping system: horizontal or

vertical, tool exchange is possible (see pages 198-205)

Groove in addition to 8.4 x 3.5 mm groove for: • Rolleri Type R3• Bystronic-

Beyeler Euro• Safan

Modi� ed groove for: • Rolleri Type R3

Groove in addition to 8.4 x 3.5 mmgroove and shortened tang for:• Rolleri Type R3• Bystronic-

Beyeler Euro• Safan


Groove for: • hydraulic

clamping Gasparini

Groove in addition to 8.4 x 3.5 mmGroove for: • Pneumatic clamping


More modi� cations pos-sible upon your request!

Give us a call or send us an inquiry!

Standard

495 mm segmented

(8 segments)

500 mm segmented

(3 segments)

Segmented tools are delivered in complete sets. Single pieces are also available!

More lengths and sectionings are possible upon request.

Horn 1Standard for all segm. Punches Rolleri Type R1

Horn 2TOPfor all segm. TOP Punches Rolleri Type R1

Horn 3for punches:00402004301170004702

Horn 4for punches:20000202001090010906

Horn 5for punches:10300

Horn 6for punches:00300

Horn individualproduced according to your speci� cations

805 mm segmented (9 segments)



Content Explanation Punches

Compatibility

Material

Tang Modi� cations from Safety Grooves

Our Advantages – Your Convenience

Indications of precision ground surfaces:


Tool lengths and sectioning

Rolleri TOP-System

Horn Types

HORN HORN HORN HORN HORN HORN

Safety groove

Press force surface

Press force line

Horn

Horn

Horn

Horn

Horn

Horn

Horn

Horn

www.sm-tech.ro

12 13

R1 R11

R1PK.97.90.R06 / P.97.90.R025 PK.97.90.R08 / R025

PK.114.90.R06

PK.120.90.R08 / R025

PK.135.90.R08 / R025P.130.90.R06 / R025

PK.116.90.R08

DK.116.90.R08

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

40

20

0

20

40

0

H

A

90°R

4

40

20

0

20

40

0

H

A

90°R

9

40

20

0

20

40

60

0

83,9

5

114

90°R 0,6

7

40

20

0

20

40

60

0

85,9

5

116

90°R 0,8

9

40

20

0

20

40

60

0

86

116

90°R 0,8

9,8

40

20

0

20

40

60

0

H

A

90°R

9,9

40

20

0

0

20

40

60

60

H

A

90°R

10,4

350 kN/m max. 1000 kN/m max.

400 kN/m max.

600 kN/m max.500 kN/m max.

200 kN/m max.


40

20

0

0

20

40

60

60

HA

90°R

8

SCA.M.90.R08

SCA.M.90.R025

150 kN/m max.

150 kN/m max.

66,3

510

20

150 90°R 0,8

35

R 25

66,6

010

20

150 90°R 0,25

35

R 25

1 1 1

1

1

1 1

1






90° Punches 90° Punches

� nd updated and helpful videos at:www.rolleritools.com/videos/overview

Rolleri Videos Articles on stock – Please note that delivery time varies according to your location.

90° Segmented Punches with Mobile Horns

• for easy bending of special box profi les

per pair € 850.- 3.5 kg

per pair € 850.- 3.5 kg

1 Pair left/right compatible with PK.97.90.R08


PK.1

35.9

0.R0

8

H=104.35 / A=134.35 / R=0.8

835 mm € 333.- 23.0 kg

415 mm € 185.- 11.5 kg795 mmsegmented € 485.- 21.9 kg805 mmsegmented € 485.- 22.2 kg

P.130

.90.

R06

H=100.00 / A=130.00 / R=0.6

835 mm € 288.- 11.5 kg


PK.1

35.9

0.R0

25

H=104.60 / A=134.60 / R=0.25

835 mm € 333.- 23.0 kg


P.130

.90.

R025

H=100.00 / A=130.00 / R=0.25

835 mm € 288.- 11.5 kg


835 mm € 426.- 14.0 kg


835 mm € 243.- 13.0 kg


835 mm € 209.- 13.0 kg


PK.9

7.90

.R06

H=66.80 / A=96.80 / R=0.6

835 mm € 190.- 10.5 kg


PK.9

7.90

.R08

H=66.35 / A=96.35/ R=0.8

835 mm € 112.- 11.0 kg


PK.1

20.9

0.R0

8

H=89.35 / A=119.35 / R=0.8

835 mm € 252.- 21.0 kg


P.97.

90.R

025

H=66.80 / A=96.80 / R=0.25

835 mm € 190.- 10.5 kg


PK.9

7.90

.R02

5

H=66.60 / A=96.60/ R=0.25

835 mm € 134.- 11.0 kg


PK.1

20.9

0.R0

25

H=89.60 / A=119.60 / R=0.25

835 mm € 252.- 21.0 kg


mobile horn demonstration at: www.rolleritools.com/videos/mobile-horns

Rolleri Videos

NEW NEW

NEW

NEW

HORN HORN HORN

HORN

HORN

HORN HORN

HORN

Area of Application

www.sm-tech.ro

14 15

R1 R11

R1

P.97.88.R08 / PK.97.88.R025

D.116.88.R08 / R3

P.116.88.R08

P.115.88.R06P.95.88.R3

P.97.88.R06 / R025

P.114.88.R06

1000 kN/m max.

500 kN/m max.

400 kN/m max.


350 kN/m max.

200 kN/m max.

C45: 560-710 N/mm2

40

20

0

20

40

60

0

H

A

88°R

9,8

40

20

0

20

40

0

65,3

595,3

5

88°R 3

9,4

40

20

0

20

40

0

H

A

88°R

4

40

20

0

20

40

0

H

A

88°R

8,9

40

20

0

20

40

60

0

84,2

0

114

88°R 0,6

7

40

20

0

20

40

60

0

86

116

88°R 0,8

9

40

20

0

20

40

60

0

85

115

88°R 0,6

00402 / 00430 1000 kN/m max.

40

20

0

20

40

0

H

A

88°R

9

11700

40

20

0

20

40

0

66,9

196,9

1

88°R 0,2

4

200 kN/m max.

20000 300 kN/m max. 10900 / 10906 500 kN/m max.

40

20

0

0

20

40

60

60

HA

88°R

6

PS.120.88.R08 450 kN/m max.

40

20

0

20

40

60

0

89,7

0119,

70

88°R 0,8

6

40

20

0

0

20

40

60

60

95

125

6

88°R 0,25

P.125.88.R025 500 kN/m max.

P.120.88.R08 / P.120.88. R3 / PK.120.88.R025 600 kN/m max.

40

20

0

20

40

60

0

H

A

88°R

10

40

20

0

20

40

0

69,9

199,9

1

88°R 0,2

8

C45: 560-710 N/mm2

1

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

3

1

1

1

C45: 560-710 N/mm2 3

C45: 560-710 N/mm2 C45: 560-710 N/mm2

1

11

C45: 560-710 N/mm2 1

C45: 560-710 N/mm2 1

42Cr: 900-1150 N/mm2

1

42Cr: 900-1150 N/mm2 4

4






835 mm € 422.- 15.6 kg


P.97.

88.R

08

H=66.65 / A=96.65 / R=0.8835 mm € 112.- 11.1 kg415 mm € 64.- 5.5 kg795 mmsegmented € 213.- 10.6 kg805 mmsegmented € 213.- 10.7 kg900 mm € 203.- 11.9 kg

P.97.

88.R

06


PK.9

7.88

.R02

5


P.97.

88.R

025


0040

2H=66.90 / A=96.90 / R=0.2

835 mm € 134.- 11.0 kg


0043

0

H=65.68 / A=95.68 / R=3

835 mm € 134.- 11.0 kg


835 mm € 207.- 7.9 kg


835 mm € 129.- 11.0 kg


835 mm € 190.- 10.7 kg


NEW

NEW

NEW

NEW

NEW

NEW

NEW

835 mm € 501.- 6.0 kg


835 mm € 194.- 12.0 kg


835 mm € 345.- 17.0 kg


835 mm € 224.- 9.0 kg


D.11

6.88

.R08

H=86.00 / A=116.00 / R=0.8

835 mm € 226.- 11.9 kg


D.11

6.88

.R3

H=85.00 / A=115.00 / R=3.0

835 mm € 360.- 11.9 kg


1090

0

H=94.91 / A=124.91 / R=0.2

835 mm € 224.- 9.0 kg


1090

6

H=94.74 / A=124.74 / R=0.6

835 mm € 224.- 9.0 kg


P.120

.88.

R08

H=89.65 / A=120.00 / R=0.8

835 mm € 252.- 21.0 kg


P.120

.88.

R3

H=88.50 / A=118.50 / R=3.0

835 mm € 252.- 21.0 kg


PK.1

20.8

8.R0

25

H=89.60 / A=120.00 / R=0.25

835 mm € 252.- 21.0 kg



HORN

HORNHORN

HORN

HORN

HORN

HORN

HORN

HORN

HORN

HORN

HORN

HORN

HORN

www.sm-tech.ro

16 17

R1 R11

R1

40

20

0

20

40

60

60

80

0

HA

88°R

8,5

PR.135.88.R08 450 kN/m max.

40

20

0

0

20

40

60

60

H

A

88°R

10,6

40

20

0

20

40

60

60

80

0

120

150

6

88°R 0,25

40

20

0

20

40

60

60

80

0

120

150

88°R 0,6

8

40

20

0

0

20

40

60

60

100

130

88°R

8,5

40

20

0

0

20

40

60

60

104,

65134,

50

88°R 0,8

610

40

20

0

0

20

40

60

60

104,

65 134,

50

88°R 0,8

1010

P.135.88.R08 / R3 / PK.135.88.R025P.130.88.R08 / R025

P.150.88.R08 / R3

P.150.88.R025

P.150.88.R06

PS.135.88.R08

400 kN/m max.

450 kN/m max.

500 kN/m max.

500 kN/m max.

350 kN/m max.20200 300 kN/m max.

40

20

0

0

20

40

60

60

99,9

1

129,

91

88°R 0,2

8

40

20

0

0

20

40

60

60

HA

88°R

8

P.130.88.R06 / PK.130.88.R025 350 kN/m max.

04702 500 kN/m max.

40

20

0

20

40

60

60

80

0

120

150

88°R 0,2

9

40

20

0

20

40

60

80

60

80

100

0

145

10,7

175

88°R 0,8

P.175.88.R08 500 kN/m max.

42Cr: 900-1150 N/mm2

4

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm21 1

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

1

1

C45: 560-710 N/mm2 C45: 560-710 N/mm2

1 1

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

1

1

1

3

500 kN/m max.






P.135

.88.

R08

H=104.65 / A=134.50 / R=0.8835 mm € 301.- 22.5 kg415 mm € 167.- 11.2 kg795 mmsegmented € 417.- 21.4 kg805 mmsegmented € 417.- 21.7 kg

P.135

.88.

R3

H=103.40 / A=133.40 / R=3.0835 mm € 301.- 22.5 kg415 mm € 167.- 11.2 kg795 mmsegmented € 417.- 21.4 kg805 mmsegmented € 417.- 21.7 kg

PK.1

35.8

8.R0

25 H=104.60 / A=134.50 / R=0.25835 mm € 306.- 22.7 kg415 mm € 167.- 11.5 kg795 mmsegmented € 413.- 21.6 kg805 mmsegmented € 413.- 21.8 kg

P.130

.88.

R08

H=100.00 / A=130.00 / R=0.8

835 mm € 233.- 14.0 kg


P.130

.88.

R025

H=100.00 / A=130.00 / R=0.25

835 mm € 218.- 13.7 kg


835 mm € 280.- 10.0 kg

415 mm € 163.- 5.0 kg795 mmsegmented € 435.- 9.5 kg800 mmsegmented € 435.- 9.6 kg P.1

30.8

8.R0

6


PK.1

30.8

8.R0

25


NEW

835 mm € 355.- 22.0 kg


835 mm € 680.- 25.0 kg


P.150

.88.

R08


P.150

.88.

R3


900 mm € 551.- 12.9 kg


900 mm € 597.- 10.0 kg


835 mm € 790.- 35.0 kg

415 mm € 452.- 17.5 kg795 mmsegmented € 1,020.- 33.3 kg805 mmsegmented € 1,020.- 33.7 kg

835 mm € 547.- 26.0 kg


NEW


HORN

HORN HORN

HORN

HORN

HORN HORN

HORN

HORN

HORN

HORN

www.sm-tech.ro

18 19

R1 R11

R1

40

20

0

20

40

60

80

100

60

80

100

166,

60

196,

6088°R 0,6

09

P.196.88.R06P.195.88.R08 300 kN/m max.600 kN/m max.

40

20

0

20

40

60

80

100

60

80

100

165

195

88°R 0,8

013

SCA.M.88.R08

SPE.11

SCA.M.88.R025

150 kN/m max.

150 kN/m max.

150 kN/m max.

66,6

510

20

150 88°R 0,8

35

R 25

66,6

010

20

150 88°R 0,25

35

R 25

300 7070

110

>38

88°R 0,8 >38

C45: 560-710 N/mm2

C45: 560-710 N/mm2

1

C45: 560-710 N/mm2

C45: 560-710 N/mm2

1

42Cr: 900-1150 N/mm2






88° Segmented Punches with Mobile Horns

835 mm € 999.- 41.0 kg


835 mm € 1,043.- 41.8 kg


900 mm € 1,043.- 45.0 kg

NEW

mobile horn demonstration at: www.rolleritools.com/videos/mobile-horns

Rolleri Videos

• for easy bending of special box profi les

Articles on stock – Please note that delivery time varies according to your location

88° Punches 88° Punches for closed pro� les

per piece upon request 7.0 kg

per pair € 850.- 3.5 kg

per pair € 850.- 3.5 kg

1 Pair left/right compatible with P.97.88.R08


NEW

NEW

Area of Application

HORN

HORN

www.sm-tech.ro

20 21

R1 R11

R1

40

20

0

0

20

40

60

60

115

145

685°R 0,8

40

20

0

20

40

0

H

A

85°R

8,940

20

0

20

40

60

0

89,6

0119,

6

85°R 0,8

10,1

40

20

0

0

20

40

60

60

104,

6013

4,60

10,685°R 0,8

40

20

0

0

20

40

60

60

105

135

8,585°R 0,8

40

20

0

0

20

40

60

60

105

135

9,185°R 0,8

PK.135.85.R08 P.135.85.R08500 kN/m max. 800 kN/m max.

P.97.85.R08 / PK.95.85.R3 PK.120.85.R08

P.130.85.R025


350 kN/m max.

P.145.85.R08

P.120.85.R1

PS.135.85.R08 600 kN/m max.

800 kN/m max.

1000 kN/m max.

40

20

0

20

40

60

0

90

120

85°R 1

6

40

20

0

20

40

60

80

60

80

100

0

H

10,7

A

45

85°R

40

20

0

20

40

60

80

60

80

100

0

144,

50

5,3

174,

50

85°R 0.8

40

20

0

20

40

60

80

100

60

80

100

120

0

H

9,5

A

46

85°R

TOP.175.85.R08.STOP.175.85.R08 / R2 200 kN/m max.900 kN/m max.

TOP.205.85.R08 / R2 700 kN/m max.

40

20

0

0

20

40

60

60

99,9

5

129,

95

85°R 0,25

8

C45: 560-710 N/mm2 1

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

1 1

1

1

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1

1

2

2

2

1






P.97.

85.R

08

H=66.60 / A=96.50 / R=0.8

835 mm € 112.- 11.0 kg


PK.9

5.85

.R3

H=65.45 / A=95.45 / R=3.0

835 mm € 132.- 11.0 kg


835 mm € 317.- 21.0 kg


835 mm € 295.- 11.5 kg


835 mm € 306.- 22.2 kg


835 mm € 270.- 13.5 kg


835 mm € 513.- 20.9 kg


NEW

NEW

NEW


835 mm € 186.- 17.7 kg


835 mm € 633.- 22.6 kg


TOP.1

75.8

5.R0

8 H=145.00 / A=175.00 / R=0.8


TOP.2

05.8

5.R0

8 H=175.00 / A=205.00 / R=0.8


TOP.1

75.8

5.R2 H=144.30 / A=174.30 / R=2.0


TOP.2

05.8

5.R2 H=174.30 / A=204.30 / R=2.0



For a rapid vertical tool exchange, punches Rolleri R1 Type can be equipped with the spring-loaded ROL1-System (20% Surcharge). Retro� tted or new! See pages 204-205

vertical

HORN

HORN HORN

HORN

HORN HORN

HORN

HORN

HORN

HORN

HORN

www.sm-tech.ro

22 23

R1 R11

R1

40

20

0

20

40

0

67,6

097,6

0

75°R 0,8

940

20

0

0

20

40

60

60

105

135

975°R 0,8

P.135.75.R08P.97.75.R08 1000 kN/m max.1000 kN/m max.

40

20

0

20

40

60

80

60

80

100

0

H

12

A

42

75°R

TOP.175.75.R08 / R2 750 kN/m max.

40

20

0

20

40

60

60

80

0

13016

0

70°R

P.160.70.R08 / R3 450 kN/m max.

40

20

0

20

40

0

67

97

60°R

12,4

40

20

0

20

40

60

0

85

115

9,860°R 0,8

40

20

0

0

20

40

60

60

105

135

7,960°R 0,8

40

20

0

0

20

40

60

60

105

135

9,860°R 0,8

40

20

0

20

40

60

60

80

0

115

145

10,260°R 0,8

P.115.60.R08

P.97.60.R08 / R2

400 kN/m max.

600 kN/m max.

PG.135.60.R08

P.135.60.R08

700 kN/m max.

800 kN/m max.

P.145.60.R08 700 kN/m max.

00300 1000 kN/m max.

40

20

0

20

0

65

95

60°R 6

C45: 560-710 N/mm2

1

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1

1

1 1

1

2

C45: 560-710 N/mm2 1

42Cr: 900-1150 N/mm2 1

6






TOP.1

75.7

5.R0

8 H=145.00 / A=175.00 / R=0.8


TOP.1

75.7

5.R2 H=144.20 / A=174.20 / R=2.0


P.160

.70.

R08

R=0.8

835 mm € 419.- 18.0 kg


P.160

.70.

R3

R=3.0

835 mm € 419.- 18.0 kg


60° Punches

835 mm € 237.- 17.5 kg


835 mm € 180.- 11.0 kg


Modi� cations of Standard Tools: rapid and precise, directly from the manufacturer! See pages 248-253

P.97.

60.R

08

R=0.8

835 mm € 147.- 9.0 kg


P.97.

60.R

2

R=2.0

835 mm € 147.- 9.0 kg


835 mm € 198.- 15.0 kg


835 mm € 371.- 11.9 kg


835 mm € 542.- 16.5 kg


835 mm € 409.- 15.0 kg


835 mm € 362.- 14.0 kg


NEW

70° Punches

75° Punches

HORNHORN

HORN

HORN HORN

HORN

HORN

HORN

HORN

HORN

www.sm-tech.ro

24 25

R1 R11

R1

40

20

0

20

40

60

80

60

80

100

0

160

7,5

190

60°R 0,8

40

20

0

20

40

60

80

60

80

100

120

0

145

175

60°R 5

40

20

0

20

40

60

80

60

80

100

0

H

7,8

A

60°R

TOP.175.60.R08 / R2 800 kN/m max. TOP.175.60.R5 1600 kN/m max.

P.190.60.R08 400 kN/m max.

40

20

0

0

20

40

60

60

100

130

45°R 6

40

20

0

20

40

0

65,1

095,1

0

45°R

40

20

0

20

40

0

66,4

096,4

0

45°R 0,5

P.97.45.R05P.95.45.R08 / R15 800 kN/m max.800 kN/m max.

P.130.45.R6 1000 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

2

2

C45: 800-850 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

1 1

1

C45: 560-710 N/mm2 1







TOP.1

75.6

0.R0

8 H=145.00 / A=175.00 / R=0.8


TOP.1

75.6

0.R2 H=143.80 / A=173.80 / R=2.0



835 mm € 870.- 41.8 kg


Take advantage of the wide range of Rolleri R1 Type punches by using our extensive number of adapters. See pages 212-217

P.95.

45.R

08

R=0.8

835 mm € 158.- 9.5 kg


P.95.

45.R

15

R=1.5

835 mm € 141.- 9.5 kg


835 mm € 192.- 19.5 kg


835 mm € 141.- 10.2 kg


900 mm € 325.- 10.9 kg

Faster vertical tool exchange with ROL100See pages 202-203

vertical

HORN

HORN

HORN HORN

HORN

HORN

www.sm-tech.ro

26 27

R1 R11

R1

40

20

0

20

40

60

0

90

120

35°R

40

20

0

20

40

60

80

100

60

80

100

120

175

205

26°R 0,8

40

20

0

0

20

40

60

60

104

134

30°R 0,8

P.110.30.R06

PS.134.30.R08

500 kN/m max.

700 kN/m max.

40

20

0

20

0

65

95

35°R 5

40

20

0

20

40

60

0

85

115

35°R 0,8

40

20

0

20

40

60

0

86

116

35°R

P.95.35.R5 1000 kN/m max. PU.85.35.R08 1000 kN/m max.

P.116.35.R08 / R15 700 kN/m max. P.120.35.R08 / R15 / R3 700 kN/m max.

40

20

0

20

40

60

0

80

110

30°R 0,6

40

20

0

0

20

40

60

60

HA

26°R

14

40

20

0

0

20

40

60

60

117

147

26°R 0,8

6

40

20

0

0

20

40

60

60

120

150

26°R 0,8

14

P.147.26.R08 PU.117.26.R08 / R3500 kN/m max. 1000 kN/m max.

PU.150.26.R08.L 1000 kN/m max.

40

20

0

20

40

60

80

60

80

100

0

145

175

26°R 0,8

TOP.175.26.R08 950 kN/m max. TOP.205.26.R08 950 kN/m max.

10300 1000 kN/m max.

40

20

0

20

40

0

67

97

30°R 0,52

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

1 1

1

1

C45: 560-710 N/mm2 1

C45: 560-710 N/mm2

1

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

2 2

42Cr: 900-1150 N/mm2

1

C45: 560-710 N/mm2 1

5

1






35° Punches

P.116

.35.

R08

R=0.8

835 mm € 160.- 10.5 kg


P.116

.35.

R15

R=1.5

835 mm € 160.- 11.0 kg


P.120

.35.

R08

R=0.8835 mm € 163.- 12.3 kg415 mm € 91.- 6.0 kg795 mmsegmented € 262.- 11.7 kg805 mmsegmented € 262.- 11.9 kg

P.120

.35.

R15


P.120

.35.

R3


835 mm € 198.- 13.5 kg


835 mm € 153.- 11.0 kg


835 mm € 260.- 13.3 kg


835 mm € 260.- 10.5 kg


835 mm € 207.- 11.0 kg


NEW

NEW

26° Punches

PU.1

17.2

6.R0

8

H=117.00 / A=147.00 / R=0.8

835 mm € 165.- 13.5 kg


PU.1

17.2

6.R3

H=109.00 / A=139.00 / R=3.0

835 mm € 326.- 13.5 kg




900 mm € 375.- 15.0 kg


835 mm € 385.- 9.8 kg


30° Punches

HORN

HORN HORN

HORN

HORN

HORN HORN

HORN

HORNHORN

HORN

HORN

www.sm-tech.ro

28 29

R1 R11

R1TOP.SP.134.28.8 TOP.SP.134.24.8

TOP.SP.134.24.12TOP.SP.134.24.10

40

20

0

20

40

60

80

60

80

0

128

58

158

24°R 0,6

8

40

20

0

20

40

60

80

60

80

0

128

58

158

24°R 0,6

10

40

20

0

20

40

60

80

60

80

0

128

58

158

24°R 0,6

12

A

2XS

S S

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

CPZ 1000 kN/m max.

60

6064

2222

1000 kN/m max.

1000 kN/m max.

* Fe Rmax = 42 Kg/mm2


23

4525

Z

Sα

23

37

Z

Sα

Z

Sα

40

20

0

20

40

60

80

60

80

0

128

58

158

28°R 0,6

8

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2







28°/24° Hemming tools Z-Profile Tools

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

525 mm € 383.- 11.0 kg495 mmsegmented € 586.- 10.3 kg




835 mm € 683.- 37.5 kg

415 mm € 416.- 18.7 kg

Example of application

Only for thin material! Hemming DiesSee page 75

NEW

Model Z (mm) α S*

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 1.0 1.0 160° 1.2 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5 1.5 160° 1.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0 2.0 150° 1.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5 2.5 140° 1.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.0/90 1.0 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5/90 1.5 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0/90 2.0 90° 0.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5/90 2.5 90° 0.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 3.0 3.0 90° 1.0 € 350.- 10.3 kg € 214.- 5.1 kg

CEZ 3.5 3.5 90° 1.0 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.0 4.0 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.5 4.5 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.0 5.0 90° 1.3 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.5 5.5 90° 1.4 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.0 6.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.5 6.5 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.0 7.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.5 7.5 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 8.0 8.0 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg

Z-Tool Inserts 160° / 150° / 140° / 90°

Model Z (mm) α S*

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 9.0 9 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 10.0 10 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 11.0 11 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 12.0 12 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 13.0 13 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 14.0 14 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 15.0 15 90° 2.3 € 389.- 13.5 kg € 237.- 6.5 kg

Z-Tool Inserts 90°

www.sm-tech.ro

30 31

R1 R11

R1TOP.PC.120-08

TOP.PC.120-20

C3 - C7.5

1000 kN/m max.

1000 kN/m max.


C45: 560-710 N/mm2

PU.67.14-S 400 kN/m max.

67

14

M4

R

120

9030

R 8

R 20

120

9030

R 20

R 40

M6

HRC 60-62

R

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

C53: 610-760 N/mm2 C45: 560-710 N/mm2

TOP.C08

C3

TOP.C20

TOP.C20

C7.5

TOP.C40






Model R (mm)

525 m

m

Price Weight

495 m

m se

gmen

ted

Price Weight

TOP.C08 8 € 36.- 0.8 kg € 151.- 1.9 kg

TOP.C10 10 € 40.- 1.3 kg € 154.- 2.7 kg

TOP.C12.5 12.5 € 42.- 2.0 kg € 207.- 2.8 kg

TOP.C15 15 € 48.- 3.0 kg € 237.- 3.8 kg

TOP.C17.5 17.5 € 53.- 4.0 kg € 244.- 4.7 kg

TOP.C20 20 € 60.- 5.2 kg € 287.- 6.6 kg

TOP.C25 25 € 89.- 8.1 kg € 386.- 7.5 kg

TOP.C30 30 € 116.- 11.7 kg € 488.- 11.3 kg

TOP.C35 35 € 176.- 16.0 kg € 605.- 15.1 kg

TOP.C40 40 € 227.- 20.7 kg € 662.- 19.5 kg

Radius Tools

TOP-Radius Tools: R8-40



for Radius tools with R8-R20(TOP.C08-TOP.C20) see below

for Radius tools with R20-R40(TOP.C20-TOP.C40) see below

Radius Punches by Rolleri also sectioned on stock! Take advan-tage of this � exibility!

Material: C53 induction hard-ened 60-62 HRc

Radius Tools

Model R (mm)

835 m

m

Price Weight

415 m

m

Price Weight

C3 3.0 € 54.- 0.20 kg € 33.- 0.10 kg

C3.5 3.5 € 56.- 0.20 kg € 34.- 0.10 kg

C4 4.0 € 58.- 0.35 kg € 35.- 0.17 kg

C4.5 4.5 € 62.- 0.50 kg € 38.- 0.25 kg

C5 5.0 € 65.- 0.60 kg € 40.- 0.30 kg

C5.5 5.5 € 69.- 0.70 kg € 41.- 0.35 kg

C6 6.0 € 71.- 0.80 kg € 42.- 0.40 kg

C6.5 6.5 € 73.- 1.00 kg € 45.- 0.50 kg

C7 7.0 € 71.- 0.80 kg € 42.- 0.40 kg

C7.5 7.5 € 73.- 1.00 kg € 45.- 0.50 kg

830 mm € 269.- 9.7 kg

410 mm € 162.- 5.0 kg

Mark-free bending with PU-Upholstery

See pages 226-227

for Radius tools with R3-R7.5(C3-C7.5) see below

www.sm-tech.ro

32 33

R1 R11

R1PU.67.14

PU.105.14

PU.87.14

PU.115.14

800 kN/m max.

800 kN/m max.

500 kN/m max.


800 kN/m max.

AH

Ø

14

M8

67

14 87 14

105

14

115

14

Ø

H

M8

E30.22 800 kN/m max.

30

22 17

14M8

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

E 30.22

E 30.22E 30.22

E 30.22C13.08

C13.08C13.08

C13.08C70.50

C70.50C70.50

C70.50






830 mm € 131.- 9.0 kg

410 mm € 74.- 5.0 kg

830 mm € 209.- 12.0 kg

410 mm € 114.- 6.0 kg

830 mm € 408.- 9.0 kg

412 mm € 232.- 4.5 kg

830 mm € 541.- 26.0 kg

410 mm € 302.- 13.0 kg

Radius Tools

for Radius tools with R8-R50(C13.08-C70.50) and hemming tool(E 30.22) see page 33




Articles on stock – Please note that delivery time varies according to your location.

Model Ø (mm) H (mm) A (mm)

835 m

m

Price Weight

415 m

m

Price Weight

C17.12 25 17 22 € 82.- 2.5 kg € 50.- 1.2 kg

C20.15 30 20 27 € 72.- 3.7 kg € 43.- 1.8 kg

C22.17 35 22 32 € 104.- 5.0 kg € 59.- 2.4 kg

C24.20 40 24 34 € 88.- 7.0 kg € 54.- 3.5 kg

C29.25 50 29 39 € 96.- 10.0kg € 55.- 4.7 kg

C34.30 60 34 44 € 116.- 13.5 kg € 71.- 6.7 kg

C45.35 70 45 55 € 234.- 20.3 kg € 128.- 10.0 kg

C45.40 80 45 55 € 268.- 23.0 kg € 144.- 11.5 kg

C60.45 90 60 70 € 325.- 34.0 kg € 175.- 17.0 kg

C70.50 100 70 80 € 342.- 43.5 kg € 195.- 21.7 kg

Model Ø (mm) H (mm)

835 m

m

Price Weight

415 m

m

Price Weight

C13.08 16 13 € 59.- 2.00 kg € 36.- 1.00 kg

C13.09 18 16 € 59.- 2.00 kg € 36.- 1.00 kg

C16.10 20 16 € 50.- 2.00 kg € 30.- 1.00 kg

Radius Tools

Radius Tools: Ø 25-100


835 mm € 89.- 3.5 kg

415 mm € 50.- 1.7 kg

Hemming Tool

www.sm-tech.ro

34 35

R1 R11

R1

INT100

INT120-40

INT150-40 INT150

INT120

INT100 FISSO 1600 kN/m max. 1600 kN/m max.

100

40

14

13 7

40

120

40

40

14

13 7

120

40

53

14

13 20

L=150 mm

L=150 mm

L=150 mm

L=150 mm L=150 mm

L=150 mm

L=150 mm

L=150 mm

L=150 mm

100

40

14

13 7

40

150

40

40

14

13 7

AD4 1000 kN/m max.

9060

3031

13

13 7

6

AD20 1000 kN/m max. 1000 kN/m max.

13

8,413

30

30

67

73,5

60

L=150 mm L=150 mm

AD19-A

10

13

8,413

3090

216

73,5

4

150

40

53

14

13 20

1000 kN/m max.

1000 kN/m max.


1000 kN/m max.

1000 kN/m max.

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

120

40

53

27

13 20

120

40

40

27

13 7

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






per piece € 71.- 3.5 kg

per piece € 87.- 5.2 kg per piece € 77.- 4.5 kg



Punch extensions / Intermediates

Punch extension without wedge crowning

Punch extension without wedge crowning

• Wedge crowning prevents de� ection

• Increase in leg length

• for special increase in leg length see SPE-p4 in the area of special tools on page 237

Compatibletensionersee page 200

Wedge crown

Wedge crown Wedge crown

Intermediates also available in L=70 mmupon request.




INT120-40-HD (Heavy Duty) INT120-HD (Heavy Duty)

Intermediates

Rolleri Clamping Systems

See pages 198-205

Wedge crown

Wedge crown

Wedge crown

Wedge crown

NEW

NEW NEW


Rolleri Type R1 Rolleri Type R2

head-bearing

Punches Rolleri Type R2 see pages 85-90

PunchesRolleri Type RX LVD see page 162

Punch Adapters

Rolleri Type R1 Rolleri Type RX LVD


www.sm-tech.ro

2R1

Content Explanation 38 - 392-V Dies 90° 402-V Dies 88° 40 - 412-V Dies 60° 422-V Dies 35° 422-V Dies 30° 42Die Holders for 2-V Dies 43Self Centering 2-V Dies 90° 44Self Centering 2-V Dies 88° 44 - 45Self Centering 2-V Dies 85° 45Self Centering 2-V Dies 30° 45Die Holder for Self Centering 2-V Dies 46Clamping Piece for Self Centering 2-V Dies 46Self Centering 1-V Dies 90° 47Self Centering 1-V Dies 88° 47 - 49Self Centering 1-V Dies 85° 50Self Centering 1-V Dies 30° 51Die Holder for Self Centering 1-V Dies 52T-Dies 90°, H=80 mm, H=120 mm 53T-Dies 88°, H=80 mm 54T-Dies 88°, H=120 mm 55T-Dies 85°, H=80 mm 56T-Dies 85°, H=120 mm 57T-Dies 80°, H=80 mm 58T-Dies 80°, H=120 mm 59T-Dies 60°, H=80 mm 60T-Dies 60°, H=120 mm 61T-Dies 45°, H=80 mm / H=120 mm 62T-Dies 35°, H=80 mm / H=120 mm 63T-Dies 30°, H=80 mm 64T-Dies 30°, H=120 mm 65T-Dies 26°, H=80 mm 66T-Dies 26°, H=120 mm 671-V Dies, 85° 681-V Dies, 80° 69

1-V Dies, 70° 701-V Dies, 60° 711-V Dies, 45° 71Multi-V Dies 72 - 73Synthetic Dies 74Hemming Dies 75Spring-Loaded Hemming Dies 76Pneumatic Hemming Dies 77Adapter Rails for Dies 78Die Adapters 79Die Extensions 79


Dies Rolleri Type R1 are compatible with press brake machines from:ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

With Adapter-Systems the dies Rolleri Type R1 are also applicable on all other press brake machines.

Compatibility

www.sm-tech.ro

38 39

R1 R1

2R1

805

2005040201510

100

370

795

20 25 30 35 40 45 50200

100250

495

253035404550100170

835 mm

415 mm

900 mm

525 mm

60

60

60 60

60






Content Explanation Dies

Dies Rolleri Type R1 are:• compatible with press brake machines

(60 mm clamping-width) from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

• also applicable on all other press brake machines with Adapter-Systems and Adapter Rails(see pages 218-221)

• own production facilities (no reseller or dealer)• tracking of every tool possible, with a unique serial number on every article after the quality control check• precision grinding (tolerance of +/-0.01 mm)• guaranteed tool reproduction• exact parallelism• precise, consistent working height• modifi cations possible (see pages 250-253) • very large stock availability

All dies Rolleri Type R1 are standardized with a60 mm tang. (Di� ering data see each tool.)


To use the dies Rolleri Type R1 on other press brake machines a 10 mm groove is milled and a grounded wedge bar /tail is needed in the correct size.

Standard






Groove

Die Rolleri Type R1

Wedge Bar / Tail

W

Mounting example

Specifi c information and prizes are found in the Rolleri Service / Modifi cations Chapter (see page 252)

Wedge Bar / Tail (W x H) System

13 x 30 mmRolleri Type R2 and R3

(Bystronic-Beyeler/Safan/Trumpf etc.)55 x 55 mm Rolleri Type RX EHT

12.7 x 29 mm Rolleri Type RX LVD35 x 55 mm Rolleri Type RX Weinbrenner

Rolleri TOP-System

Compatibility Our Advantages – Your Convenience

Tang

Modi� cation: Wedge Bar / Tail



inner radius54-60 HRC




Press force line

Press force lines

Press force line

Press force line







Material

H

www.sm-tech.ro

40 41

R1 R1

2R1

M26.90.03 M26.90.01

M26.88.01

M26.88.03

M26.88.05

M26.90.02

M26.88.02

M26.88.04


1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

55

6

6

10

1039

26

R 0,6R 0,4

90°

55

8

8

12

1037

26

R 0,8R 0,5

90°

55

6

6

10

1039

26

R 0,6R 0,4

88°

55

8

8

12

1037

26

R 0,8R 0,5

88°

55

10 1530

26

R 3R 2,75

88°

12 20

55

16

12

25

16,526,5

26

R 2,75R 2,75

88°

55

14

11

18

1331

26

R 3R 2,75

88°

55

4

4

7

744

26

R 0,5R 0,3

90°

12300 12400700 kN/m max. 800 kN/m max.

50

6

4,5

10

6,5

26

R 0,6R 0,4

90°

50

8

5,5

12

7,5

26

R 0,8R 0,5

90°

12306 12406700 kN/m max. 800 kN/m max.

50

6

4,5

10

6,5

25,5

R 0,6R 0,4

88°

50

8

5,5

12

7,5

25,5

R 0,8R 0,5

88°

12500

12700

12600

31400

1000 kN/m max.

700 kN/m max.

1000 kN/m max.

1000 kN/m max.

50

14

8,5

18

10,5

26

R 0,5R 0,5

88°

50

12

7,5

20

12

26

R 0,5R 0,5

88°

50

16

9,5

25

14,5

26

R 0,8R 0,8

88°

55

12

10

20

15

26

R 4R 3

88°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2






2-V Dies 90°

NEW

NEW NEW

2-V Dies 88°

Die Holders for 2-V Dies see page 43

NEW

NEW

NEW

NEW

Take advantage of our adapters on pages 218-221 when using dies Rolleri Type R1.

NEW

2-V Dies 88°

NEW

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

835 mm € 120.- 8.0 kg

415 mm € 68.- 3.9 kg

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

835 mm € 113.- 8.0 kg

415 mm € 66.- 4.0 kg

835 mm € 113.- 8.0 kg

415 mm € 66.- 4.0 kg

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

900 mm € 207.- 10.0 kg

835 mm € 113.- 9.0 kg

415 mm € 66.- 4.5 kg

900 mm € 207.- 10.0 kg

835 mm € 120.- 8.0 kg

415 mm € 68.- 3.9 kg

835 mm € 120.- 8.0 kg

415 mm € 68.- 3.9 kg

835 mm € 120.- 7.7 kg

415 mm € 68.- 3.8 kg

835 mm € 120.- 7.0 kg

415 mm € 68.- 3.4 kg

835 mm € 120.- 8.0 kg

415 mm € 68.- 3.9 kg

835 mm € 120.- 7.5 kg

415 mm € 68.- 3.7 kg

835 mm € 120.- 7.5 kg

415 mm € 68.- 3.7 kg

www.sm-tech.ro

42 43

R1 R1

2R1

M31.35.01

M26.60.01

M26.60.03

M31.35.02

M26.60.02

M26.60.05

300 kN/m max.

600 kN/m max.

800 kN/m max.

300 kN/m max.

800 kN/m max.

800 kN/m max.

55

6

6

10

1039

26

R 0,8R 0,5

60°

55

8

8

12

1037

26

R 0,8R 0,5

60°

55

12

10

20

1530

26

R 3R 0,8

60°55

16

12

20

1528

26

R 3R 3

60°

55

6

6

10

1039

31

R 1R 0,6

35°

55

8

8

12

1037

26

R 1,2R 1

35°

SU034

SU075

SU055

60

34

2014

60

55

3619

60

75

5619

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

33700 300 kN/m max.

42Cr: 900-1150 N/mm2

60

8 1214,5 18

38

R 1R 1






Die Holders for 2-V Dies

for all 2-V Diespages 40-42




2-V Dies 60°

2-V Dies 35°

2-V Dies 30°

NEW


Rolleri Videos

835 mm € 156.- 8.0 kg

415 mm € 91.- 4.0 kg

835 mm € 156.- 8.0 kg

415 mm € 91.- 4.0 kg

835 mm € 219.- 11.0 kg

415 mm € 126.- 5.5 kg

835 mm € 219.- 10.0 kg

415 mm € 126.- 5.0 kg

835 mm € 156.- 9.0 kg

415 mm € 91.- 4.5 kg

830 mm € 121.- 9.0 kg

410 mm € 73.- 4.5 kg

830 mm € 191.- 20.5 kg

410 mm € 111.- 10.0 kg

830 mm € 132.- 14.5 kg

410 mm € 79.- 7.2 kg

835 mm € 156.- 9.0 kg

415 mm € 91.- 4.5 kg

900 mm € 241.- 10.0 kg

835 mm € 184.- 13.3 kg

415 mm € 98.- 5.6 kg

www.sm-tech.ro

44 45

R1 R1

2R1

46-10

46-12

46.13

46.15

46.11.88

46.14

46.16

M26.85.02

46.17

46-11

46.18

800 kN/m max.


700 kN/m max.

700 kN/m max.

800 kN/m max.

800 kN/m max.

800 kN/m max.

800 kN/m max.

800 kN/m max.

1000 kN/m max.


800 kN/m max.

34,515

4

3,5

7

526

466

R 0,5R 0,3

90°

3715

6

4,5

10

6,526

466

R 0,6R 0,4

90°

3915

8

5,5

12

7,526

466

R 0,8R 0,5

90°

3715

6

4,5

10

6,526

466

R 0,6R 0,4

88°

3915

8

5,5

12

7,526

466

R 0,8R 0,5

88°

45,515

12

7,5

20

1226

466

R 1,75R 0,8

88°

4515

14

8,5

18

10,526

466

R 1,5R 1,25

88°

5015

16

9,5

25

14,526

466

R 1,75R 1,5

88°

4515

6

7

10

1226

466

R 1R 0,6

30°

5015

8

9,5

12

14,526

466

R 1,5R 0,8

30°

50

8

5,5

12

7,537

26

R 0,8R 0,5

85°

6

15

50190

50290

30247

5015

6

4,5

10

6,5

45,5

R 0,6R 0,4

88°

6

3715

6

5,5

10

7,5

46

R 0,6R 0,4

90°

6

C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2 C45: 800-850 N/mm2 C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2 C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2 C45: 800-850 N/mm2

C45: 800-850 N/mm2

34,515

4

4,25

7

5,75

40

R 0,4R 0,4

90°

5

42Cr: 900-1150 N/mm2






Self Centering 2-V Dies 90°

NEW

NEW


835 mm € 194.- 9.7 kg


835 mm € 194.- 10.0 kg


835 mm € 194.- 9.7 kg


835 mm € 194.- 10.5 kg


835 mm € 194.- 10.3 kg


835 mm € 194.- 10.9 kg


835 mm € 194.- 10.3 kg




835 mm € 194.- 12.6 kg


835 mm € 387.- 9.0 kg


835 mm € 194.- 17.0 kg


835 mm € 194.- 12.0 kg


835 mm € 194.- 13.0 kg


Die Adapters see pages 218-221


835 mm € 248.- 12.2 kg


835 mm € 248.- 13.2 kg


www.sm-tech.ro

46 47

R1 R1

2R1

PB60

50

25

15

PM50 PM50.20

PM60

50

15

15M8

10

50

20

15M8

15

60

25

159,5 35,5

20

32000

32300 07000

0730007100

32100950 kN/m max.

950 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

950 kN/m max.


950 kN/m max.

14

6

30

R 1,5

90°

14

8

30

R 1,5

90°

15

10

30

R 2

90°

14

6

60

R 1,5

90°

14

8

60

R 1,5

90°

10 R 2

1415

6015

90°

32006

32200

32106

32400

950 kN/m max.

950 kN/m max.

950 kN/m max.

1000 kN/m max.

14

6

29,5

R 1,5

88°

14

8

29,5

R 1,5

88°

17

12

30

R 2,5

88°

15

1030

R 2

88°

Fe37

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 800-850 N/mm2C45: 560-710 N/mm2






Clamping Piece for Self Centering 2-V Dies

Die Holders for Self Centering 2-V Dies

NEW

for all self centering 2-V diespages 44-45




pair € 41.- 0.2 kg



NEW NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

835 mm € 125.- 4.0 kg

415 mm € 68.- 2.0 kg

835 mm € 125.- 5.4 kg

415 mm € 68.- 2.6 kg

835 mm € 172.- 7.5 kg

415 mm € 99.- 3.7 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 258.- 5.5 kg

415 mm € 180.- 2.7 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 258.- 5.5 kg

415 mm € 180.- 2.7 kg

835 mm € 258.- 6.0 kg

415 mm € 180.- 3.0 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

835 mm € 106.- 3.0 kg

415 mm € 70.- 1.5 kg

www.sm-tech.ro

48 49

R1 R1

2R1

AMR60.04.88

AMR60.08.88

AMR60.12.88

AMR60.20.88

AMR60.10.88

AMR60.16.88

AMR60.25.88

AMR60.06.881000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

950 kN/m max.

14

4

60

R 0,6

88°

14

6

60

R 0,8

88°

14

8

60

R 1,0

88°

14

10

60

R 1,2

88°

18

15

14

12

60

R 1,5

88°

18

15

14

16

60

R 2,0

88°

24

15

14

20

60

R 2,0

88°

3015

14

25

60

R 3,0

88°

35

15

07006

07200 07400

07106

950 kN/m max.

950 kN/m max.

950 kN/m max.

14

6

60

R 1,5

88°

14

8

60

R 1,5

88°

10 R 2

1415

6015

88°

12 R 2,5

1417

6015

88°

1000 kN/m max.32500

18

1430

R 2,5

88°C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Self Centering 1-V Dies 88° Self Centering 1-V Dies 88°

835 mm € 196.- 5.4 kg


835 mm € 196.- 5.4 kg


835 mm € 183.- 5.4 kg


835 mm € 183.- 5.6 kg


835 mm € 183.- 6.1 kg


835 mm € 211.- 8.0 kg


835 mm € 205.- 7.1 kg


835 mm € 211.- 9.2 kg


Compatible Die Holders for bolted 1-V Dies see page 52, Article-No. 33000

Compatible Die Holders for bolted 1-V Dies see page 52, Article No. SU61F

NEW

NEW

NEW

NEW

NEW

835 mm € 106.- 3.3 kg

415 mm € 70.- 1.6 kg

835 mm € 258.- 5.5 kg

415 mm € 180.- 2.7 kg

835 mm € 258.- 6.0 kg

415 mm € 180.- 3.0 kg

835 mm € 258.- 5.5 kg

415 mm € 180.- 2.7 kg

835 mm € 258.- 6.0 kg

415 mm € 180.- 3.0 kg

www.sm-tech.ro

50 51

R1 R1

2R1

AMR60.08.30

AMR60.04.85

AMR60.08.85

AMR60.12.85

AMR60.20.85

AMR60.12.30

AMR60.20.30

AMR60.10.30

AMR60.06.85

AMR60.10.85

AMR60.16.85

AMR60.25.85

AMR60.16.30

AMR65.25.30

AMR60.06.30

350 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.


500 kN/m max.

500 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.


350 kN/m max.

14

6

60

R 0,6

30°

14

8

60

R 0,8

30°

18

15

2

14

10

60

R 1,0

30°

24

15

2

14

12

60

R 1,5

30°

24

15

2

14

16

60

R 2,0

30

15

30°5

30°5

14

20

60

R 2,5

35

15

14

25

65

R 3,0

45

15

30°8

14

460

R 0,6

85°

14

6

60

R 0,8

85°

14

8

60

R 1,0

85°

14

10

60

R 1,2

85°

1815

14

12

60

R 1,5

85°

18

15

14

16

60

R 2,0

85°

24

15

14

20

60

R 2,0

85°

30

15

14

25

60

R 3,0

85°

35

15

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






835 mm € 183.- 5.6 kg


835 mm € 205.- 7.1 kg


835 mm € 211.- 9.2 kg


835 mm € 196.- 5.4 kg


835 mm € 196.- 5.4 kg


835 mm € 183.- 5.4 kg


835 mm € 183.- 6.1 kg


835 mm € 211.- 8.0 kg


NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

Self Centering 1-V Dies 30°Self Centering 1-V Dies 85°

835 mm € 221.- 5.9 kg


835 mm € 221.- 7.8 kg


835 mm € 246.- 8.8 kg


835 mm € 246.- 13.0 kg


835 mm € 221.- 6.6 kg


835 mm € 221.- 7.9 kg


835 mm € 246.- 15.9 kg


www.sm-tech.ro

52 53

R1 R1

2R1

SU61F33000

08000 08100

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.


60

1410

61,5

51,5

20

17

60

V

S

8018

R

90°

60

14

81,5

20

60

14

25

2041

,5

60

14

25

2041

,5

R 0,8 R 4

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

1000 kN/m max.

60

V

S

120

18

R

90°

C45: 560-710 N/mm2






Die Holders for Self Centering 1-V Dies Prevention of Bending Marks

The following options are available to prevent bending marks on the surfaces:• Protective Sheets• PU-Upholstery • Synthetic Dies

The alternative to these options mentioned above,is a modifi cation of the dies: • enlargement of the dies‘ inner radius (Retrofi tting of new or existing dies)This solution is available on stock for some of our T-Dies under the Article No.: TR

• Prevention of streaks and markings on the bended sheet metals • No post processing necessary and therefore, time- and cost e� cient.• No contact of bending pieces • increases product quality • easy handling

for self centering 1-V Dies, pages 49-51

for self centering, bolted 1-V Dies, pages 47-48

for self centering 1-V Dies, pages 47-51

for self centering 1-V Dies,pages 47-51

Speci� c information for mark-free bending see pages 222-229

Standard T-Die with small inner radius

causes visible bending marks

T-Die TR with a larger inner radius

clearly reduces bending marks

NEW

NEW NEW

T-Dies 90°, H=80 mmModel V

(mm)R

(mm)S

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

900 m

m Price Weight

T80.06.90 6 0.4 14 € 219.- 13.0 kg € 126.- 6.5 kg € 340.- 12.4 kg € 340.- 12.5 kg € 335.- 14.0 kg

T80.08.90 8 0.5 14 € 219.- 13.0 kg € 126.- 6.5 kg € 340.- 12.4 kg € 340.- 12.5 kg € 335.- 14.0 kg

T80.10.90 10 0.6 18 € 219.- 14.2 kg € 126.- 7.0 kg € 340.- 13.5 kg € 340.- 13.7 kg

T80.12.90 12 0.8 18 € 219.- 15.0 kg € 126.- 7.5kg € 356.- 14.3 kg € 356.- 14.5 kg

T-Dies 90°, H=80 mm, H=120 mm


(mm)R

(mm)S

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

T120.06.90 6 0.4 14 € 354.- 16.0 kg € 203.- 8.0 kg € 509.- 15.2 kg € 509.- 15.4 kg

T120.08.90 8 0.5 14 € 354.- 16.0 kg € 203.- 8.0 kg € 509.- 15.2 kg € 509.- 15.4 kg

T120.10.90 10 0.6 18 € 354.- 19.0 kg € 203.- 9.0 kg € 509.- 18.1 kg € 509.- 18.3 kg

T120.12.90 12 0.8 18 € 354.- 19.0 kg € 203.- 9.0 kg € 509.- 18.1 kg € 509.- 18.3 kg

Our Advantages – Your Convenience835 mm € 387.- 14.8 kg

415 mm € 229.- 7.3 kg

835 mm € 188.- 12.7 kg

415 mm € 102.- 6.3 kg

1050 mm € 473.- 17.8 kg 1260 mm € 559.- 21.4 kg

www.sm-tech.ro

54 55

R1 R1

2R1

T80.06.88 / TR80.06.88

T80.16.88

T80.08.88 / TR80.08.88

T80.20.88

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

T80.10.88 / TR80.10.88

T80.25.88

T80.12.881000 kN/m max.

1000 kN/m max.

1000 kN/m max.

60

6

14

8018

R

88°

60

8

14

8018

R

88°

60

10

18

8018

R

88°

60

12

1880

18

R 2,75

88°

60

16

24

8018

R 2,75

88°

60

20

30

8018

R 3,0

88°

60

25

35

8018

R 3,0

88°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2

T120.06.88 / TR120.06.88 T120.08.88 / TR120.08.881000 kN/m max. 1000 kN/m max.

T120.10.88 / TR120.10.88 T120.12.881000 kN/m max. 1000 kN/m max.

60

6

14

120

18

R

88°

60

8

14

120

18

R

88°

60

10

18

120

18

R

88°

60

12

18

120

18

R 2,75

88°

T120.16.88 T120.20.881000 kN/m max. 1000 kN/m max.

60

16

24

120

18

R 2,75

88°

60

20

30

120

18

R 3,0

88°

T120.25.88 1000 kN/m max.

60

25

35

120

18

R 3,0

88°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2






835 mm € 219.- 14.0 kg


835 mm € 219.- 18.5 kg


835 mm € 219.- 16.6 kg


835 mm € 219.- 20.2 kg


T80.

06.8

8

R=0.4

835 mm € 219.- 13.0 kg


T80.

10.8

8

R=0.8

835 mm € 219.- 14.2 kg


T80.

08.8

8

R=0.5

835 mm € 219.- 12.6 kg


TR80

.06.

88

R=2.75

835 mm € 322.- 13.0 kg


TR80

.10.

88

R=2.75

835 mm € 322.- 15.0 kg


TR80

.08.

88

R=2.75

835 mm € 322.- 13.0 kg


T-Dies 88°, H=80 mm



835 mm € 354.- 19.0 kg


835 mm € 354.- 22.0 kg


835 mm € 354.- 27.0 kg


835 mm € 354.- 30.0 kg


T120

.06.

88

R=0.4

835 mm € 354.- 16.5 kg


T120

.10.

88

R=0.8

835 mm € 354.- 19.0 kg


T120

.08.

88

R=0.5

835 mm € 354.- 16.0 kg


TR12

0.06

.88

R=2.75

835 mm € 457.- 16.0 kg


TR12

0.10

.88

R=2.75

835 mm € 457.- 18.0 kg


TR12

0.08

.88

R=2.75

835 mm € 457.- 16.0 kg


Visit our Homepage at: www.rolleritools.com

www.sm-tech.ro

56 57

R1 R1

2R1

T120.06.85 T120.08.851000 kN/m max. 1000 kN/m max.

T120.10.85 T120.12.851000 kN/m max. 1000 kN/m max.

T120.16.85 T120.20.851000 kN/m max. 1000 kN/m max.

T120.25.85 1000 kN/m max.

60

6

14

120

18

R 2,75

85°

60

8

14

120

18

R 2,75

85°

60

10

18

120

18

R 2,75

85°

60

12

18

120

18

R 2,75

85°

60

16

24

120

18

R 2,75

85°

60

20

30

120

18

R 3,0

85°

60

25

35

120

18

R 3,0

85°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

T80.06.85

T80.16.85

T80.08.85

T80.20.85

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

T80.10.85

T80.25.85

T80.12.851000 kN/m max.

1000 kN/m max.

1000 kN/m max.

60

6

14

8018

R 2,75

85°

60

8

14

8018

R 2,75

85°

60

10

18

8018

R 2,75

85°

60

12

1880

18

R 2,75

85°

60

16

24

8018

R 2,75

85°

60

20

30

8018

R 3,0

85°

60

25

35

8018

R 3,0

85°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






835 mm € 219.- 14.1 kg


835 mm € 219.- 12.6 kg


835 mm € 219.- 13.0 kg


835 mm € 219.- 14.2 kg


835 mm € 219.- 19.0 kg


835 mm € 219.- 16.4 kg


835 mm € 219.- 20.0 kg


Do you have queries about delivery times, operational areas, and other possibili-ties? Give us a call!

T-Dies 85°, H=80 mm T-Dies 85°, H=120 mm

835 mm € 354.- 18.9 kg


835 mm € 354.- 19.0 kg


835 mm € 354.- 16.3 kg


835 mm € 354.- 22.7 kg


835 mm € 354.- 16.3 kg


835 mm € 354.- 30.0 kg


835 mm € 354.- 30.0 kg


www.sm-tech.ro

58 59

R1 R1

2R1

T120.06.80 T120.08.80950 kN/m max. 950 kN/m max.

T120.10.80 T120.12.80950 kN/m max. 950 kN/m max.

T120.16.80 T120.20.80950 kN/m max. 950 kN/m max.

T120.25.80 950 kN/m max.

60

6

14

120

18

R 2,75

80°

60

8

14

120

18

R 2,75

80°

60

10

18

120

18

R 2,75

80°

60

12

18

120

18

R 2,75

80°

60

16

24

120

18

R 2,75

80°

60

20

30

120

18

R 3,0

80°

60

25

35

120

18

R 3,0

80°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

T80.06.80

T80.16.80

T80.08.80

T80.20.80

950 kN/m max.

950 kN/m max.

950 kN/m max.

950 kN/m max.

T80.10.80

T80.25.80

T80.12.80950 kN/m max.

950 kN/m max.

950 kN/m max.

60

6

14

8018

R 2,75

80°

60

8

14

8018

R 2,75

80°

60

10

18

8018

R 2,75

80°

60

12

1880

18

R 2,75

80°

60

16

24

8018

R 2,75

80°

60

20

30

8018

R 3,0

80°

60

25

35

8018

R 3,0

80°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2







835 mm € 300.- 13.0 kg


835 mm € 300.- 13.0 kg


835 mm € 300.- 13.0 kg


835 mm € 300.- 13.0 kg


835 mm € 300.- 13.0 kg


835 mm € 300.- 13.0 kg


835 mm € 300.- 20.0 kg


More than 20.000 tools are available for you in our warehouse!


835 mm € 443.- 18.0 kg


835 mm € 443.- 18.0 kg


835 mm € 443.- 18.0 kg


835 mm € 443.- 18.8 kg


835 mm € 443.- 18.0 kg


835 mm € 443.- 26.3 kg


835 mm € 443.- 30.0 kg


www.sm-tech.ro

60 61

R1 R1

2R1

T120.06.60 / TR120.06.60

T120.16.60

T120.08.60 / TR120.08.60

T120.20.60

600 kN/m max.

600 kN/m max.

600 kN/m max.

600 kN/m max.

T120.10.60 / TR120.10.60

T120.25.60

T120.12.60 / TR120.12.60600 kN/m max.

600 kN/m max.

600 kN/m max.

60

6

14

120

18

R

60°

60

8

14

120

18

R

60°

60

10

18

120

18

R

60°

60

12

18

120

18

R

60°

60

16

24

120

18

R 2,75

60°

60

20

30

120

18

R 3,0

60°

60

25

35

120

18

R 3,0

60°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

T80.06.60 / TR80.06.60

T80.16.60

T80.08.60 / TR80.08.60

T80.20.60

600 kN/m max.

600 kN/m max.

600 kN/m max.

600 kN/m max.

T80.10.60 / TR80.10.60

T80.25.60

T80.12.60 / TR80.12.60600 kN/m max.

600 kN/m max.

600 kN/m max.

60

6

14

8018

R

60°

60

8

14

8018

R

60°

60

10

18

8018

R

60°

60

12

1880

18

R

60°

60

16

24

8018

R 2,75

60°

60

20

308018

R 3,0

60°

60

25

35

8018

R 3,0

60°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2







835 mm € 250.- 19.5 kg


835 mm € 250.- 15.6 kg


835 mm € 250.- 18.0 kg


T80.

06.6

0

R=0.5

835 mm € 237.- 13.0 kg


T80.

08.6

0

R=0.8

835 mm € 237.- 13.0 kg


T80.

12.6

0

R=0.8

835 mm € 237.- 17.0 kg


T80.

10.6

0

R=0.8

835 mm € 237.- 17.0 kg


TR80

.06.

60

R=1.5

835 mm € 343.- 13.0 kg


TR80

.08.

60

R=1.5

835 mm € 343.- 13.0 kg


TR80

.12.

60

R=2.75

835 mm € 343.- 15.0 kg


TR80

.10.

60

R=2.75

835 mm € 343.- 15.0 kg



835 mm € 384.- 22.4 kg


835 mm € 384.- 28.5 kg


835 mm € 384.- 26.0 kg


T120

.10.

60

R=0.8

835 mm € 366.- 18.0 kg


T120

.12.

60

R=0.8

835 mm € 366.- 18.0 kg


T120

.06.

60

R=0.5

835 mm € 366.- 16.0 kg


T120

.08.

60

R=0.8

835 mm € 366.- 16.0 kg


TR12

0.10

.60

R=2.75

835 mm € 471.- 18.0 kg


TR12

0.12

.60

R=2.75

835 mm € 471.- 18.0 kg


TR12

0.06

.60

R=1.5

835 mm € 471.- 16.0 kg


TR12

0.08

.60

R=1.5

835 mm € 471.- 16.0 kg


For modi� cations on dies see pages 250-253

www.sm-tech.ro

62 63

R1 R1

2R1

60

V

S

8018

R

35°

60

V

S

120

18

R

45°

500 kN/m max.

C45: 560-710 N/mm2 C45: 560-710 N/mm2

60

V

S

120

18

R

35°

C45: 560-710 N/mm2

60

V

S

8018

R

45°

500 kN/m max.

C45: 560-710 N/mm2






T-Dies 45°, H=80 mm / H=120 mm T-Dies 35°, H=80 mm / H=120 mm


(mm)R

(mm)S

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

T80.06.45 6 0.8 14 € 258.- 13.0 kg € 147.- 6.5 kg € 388.- 12.4 kg € 388.- 12.5 kg

T80.08.45 8 1.0 18 € 258.- 15.0 kg € 147.- 7.5 kg € 388.- 14.3 kg € 388.- 14.5 kg

T80.10.45 10 1.2 18 € 258.- 14.0 kg € 147.- 7.0 kg € 388.- 13.3 kg € 388.- 13.5 kg

T80.12.45 12 1.6 24 € 258.- 16.3 kg € 147.- 8.1 kg € 388.- 15.5 kg € 377.- 15.7 kg

T80.16.45 16 2.75 26 € 269.- 16.6 kg € 154.- 8.3 kg € 406.- 15.8 kg € 406.- 16.0 kg

T80.20.45 20 3.0 30 € 269.- 18.0 kg € 154.- 9.0 kg € 391.- 17.1 kg € 391.- 17.3 kg

T80.25.45 25 3.0 37 € 269.- 20.0 kg € 154.- 10.0 kg € 391.- 19.0 kg € 391.- 19.3 kg


(mm)R

(mm)S

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

T120.06.45 6 0.8 14 € 395.- 16.0 kg € 229.- 8.0 kg € 554.- 15.2 kg € 554.- 15.4 kg

T120.08.45 8 1.0 18 € 395.- 18.0 kg € 229.- 9.0 kg € 554.- 17.1 kg € 554.- 17.3 kg

T120.10.45 10 1.2 18 € 395.- 18.0 kg € 229.- 9.0 kg € 554.- 17.1 kg € 554.- 17.3 kg

T120.12.45 12 1.6 24 € 395.- 18.0 kg € 229.- 9.0 kg € 554.- 17.1 kg € 554.- 17.3 kg

T120.16.45 16 2.75 26 € 414.- 25.0 kg € 227.- 12.5 kg € 550.- 23.8 kg € 550.- 24.1 kg

T120.20.45 20 3.0 30 € 414.- 26.0 kg € 227.- 13.5 kg € 550.- 24.8 kg € 550.- 25.0 kg

T120.25.45 20 3.0 37 € 414.- 30.0 kg € 227.- 15.0 kg € 550.- 28.6 kg € 550.- 28.9 kg



(mm)R

(mm)S

(mm)kN/mmax.

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

T120.06.35 6 0.8 14 350 € 402.- 16.0 kg € 234.- 8.0 kg € 565.- 15.2 kg € 565.- 15.4 kg

T120.08.35 8 1.0 16 350 € 402.- 18.0 kg € 234.- 9.0 kg € 565.- 17.1 kg € 565.- 17.3 kg

T120.10.35 10 1.2 20 400 € 402.- 19.9 kg € 234.- 8.5 kg € 565.- 18.9 kg € 565.- 19.1 kg

T120.12.35 12 1.6 22 400 € 402.- 21.0 kg € 234.- 10.0 kg € 565.- 20.0 kg € 565.- 20.2 kg

T120.16.35 16 3.0 30 450 € 422.- 25.8 kg € 245.- 12.8 kg € 559.- 24.6 kg € 560.- 24.8 kg

T120.20.35 20 3.0 35 500 € 422.- 28.0 kg € 245.- 14.0 kg € 592.- 26.7 kg € 592.- 27.0 kg

T120.25.35 25 3.0 40 500 € 422.- 30.5 kg € 245.- 15.2 kg € 592.- 29.0 kg € 592.- 29.4 kg

Model V (mm)

R (mm)

S (mm)

kN/mmax.

835 m

m

Price Weight

415 m

m

Price Weight

795 m

m se

gmen

ted

Price Weight

805 m

m se

gmen

ted

Price Weight

T80.06.35 6 0.8 14 350 € 262.- 12.5 kg € 149.- 6.5 kg € 395.- 11.9 kg € 395.- 12.0 kg

T80.08.35 8 1.0 16 350 € 262.- 13.0 kg € 149.- 7.0 kg € 395.- 12.4 kg € 395.- 12.6 kg

T80.10.35 10 1.2 20 400 € 262.- 15.0 kg € 149.- 7.5 kg € 395.- 14.3 kg € 395.- 14.5 kg

T80.12.35 12 1.6 22 400 € 262.- 15.5 kg € 149.- 8.0 kg € 395.- 14.8 kg € 395.- 15.0 kg

T80.16.35 16 3.0 30 450 € 275.- 18.0 kg € 156.- 8.5 kg € 415.- 17.1 kg € 415.- 17.3 kg

T80.20.35 20 3.0 35 500 € 275.- 19.3 kg € 156.- 9.0 kg € 399.- 18.4 kg € 399.- 18.6 kg

T80.25.35 25 3.0 40 500 € 275.- 20.0 kg € 156.- 9.9 kg € 399.- 19.0 kg € 399.- 19.3 kg

www.sm-tech.ro

64 65

R1 R1

2R1

T120.06.30

T120.16.30

T120.08.30

T120.20.30

350 kN/m max.

450 kN/m max.

350 kN/m max.

500 kN/m max.

T120.10.30

T120.25.30

T120.12.30500 kN/m max.

500 kN/m max.

400 kN/m max.

60

6

14

120

18

R 0,6

30°

60

8

18

120

18

R 0,8

30°

60

10

24

120

18

R 1,0

30°

60

12

24

120

18

R 1,5

30°

60

16

30

120

18

R 2,0

30°

60

20

35

120

18

R 2,5

30°

60

25

40

120

18

R 3,0

30°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

T80.06.30 T80.08.30350 kN/m max. 350 kN/m max.

60

6

14

8018

R 0,6

30°

60

8

18

8018

R 0,8

30°

T80.16.30 T80.20.30450 kN/m max. 500 kN/m max.

T80.10.30

T80.25.30

T80.12.30500 kN/m max.

500 kN/m max.

400 kN/m max.

60

10

248018

R 1,0

30°

60

12

248018

R 1,5

30°

60

16

308018

R 2,0

30°

60

20

35

8018

R 2,5

30°

60

25

40

8018

R 3,0

30°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2







835 mm € 262.- 12.4 kg


835 mm € 262.- 16.0 kg


835 mm € 275.- 18.0 kg


835 mm € 275.- 20.0 kg


835 mm € 262.- 13.0 kg


835 mm € 262.- 16.0 kg


835 mm € 275.- 18.0 kg




835 mm € 402.- 16.0 kg


835 mm € 402.- 22.0 kg


835 mm € 422.- 25.8 kg


835 mm € 422.- 30.5 kg


835 mm € 402.- 19.0 kg


835 mm € 402.- 22.0 kg


835 mm € 422.- 28.0 kg


www.sm-tech.ro

66 67

R1 R1

2R1

T120.06.26 T120.08.26200 kN/m max. 200 kN/m max.

T120.10.26 T120.12.26200 kN/m max. 200 kN/m max.

60

6

16

120

18

R 0,8

26°

60

8

20

120

18

R 1,0

26°

60

10

24

120

18

R 1,2

26°

60

12

26

120

18

R 1,6

26°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

T80.06.26 T80.08.26200 kN/m max. 200 kN/m max.

T80.10.26 T80.12.26200 kN/m max. 200 kN/m max.

60

6

16

8018

R 0,8

26°

60

8

20

8018

R 1,0

26°

60

10

248018

R 1,2

26°

60

12

268018

R 1,6

26°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2







835 mm € 456.- 18.0 kg


835 mm € 418.- 22.0 kg


835 mm € 418.- 22.0 kg


835 mm € 418.- 19.0 kg


835 mm € 268.- 14.0 kg


835 mm € 268.- 15.5 kg


835 mm € 268.- 15.0 kg


835 mm € 268.- 16.6 kg



www.sm-tech.ro

68 69

R1 R1

2R1

M60.85.32

M60.85.50

M80.85.80

M60.85.40

M75.85.63

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

60

32

60

R 4

85°

60

40

60

R 4

85°

60

50

60

R 4

85°

60

63

80

7520

R 5

85°

60

80

95

8020

R 6

85°

M95.80.100

MK130.80.160

MK103.80.125

1000 kN/m max.

700 kN/m max.

700 kN/m max.

60

100

120

9520

R 8

80°

M103.80.125

M130.80.160

1000 kN/m max.

1000 kN/m max.

90

125

154

103

20

R 15

80°

90

160

185

130

20

R 10

80°

60

125

154

103

20

R 15

80°

60

160

185

130

20

R 10

80°

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






1-V Dies, 85° 1-V Dies, 80°

835 mm € 145.- 21.6 kg


835 mm € 145.- 19.0 kg


835 mm € 360.- 33.5 kg


835 mm € 145.- 20.0 kg


835 mm € 284.- 29.2 kg


835 mm € 453.- 46.2 kg


835 mm € 642.- 62.0 kg


835 mm € 842.- 93.0 kg


835 mm € 588.- 64.9 kg


835 mm € 784.- 93.0 kg


www.sm-tech.ro

70 71

R1 R1

2R1

120

200

250

195

25

R 15

70°

M195.70.200 1800 kN/m max.

42Cr: 900-1150 N/mm2

60

80

110

110

20

R 6

60°

60

63

86

8620

R 5

60°

60

32

80

R 4

45°

60

40

75

8020

R 4

45°

60

50

85

8020

R 4

45°

M86.60.63

M80.45.32

M80.45.50

M110.60.801000 kN/m max.

1000 kN/m max.

950 kN/m max.

1000 kN/m max.

1000 kN/m max.M80.45.40

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






1-V Dies, 70° 1-V Dies, 60°

1-V Dies, 45°

835 mm € 531.- 34.0 kg


835 mm € 242.- 27.5 kg


835 mm € 482.- 31.0 kg


835 mm € 762.- 53.0 kg


835 mm € 354.- 30.9 kg


For the application of dies Rolleri Type R1 use the adapters on pages 218-221

415 mm € 1,556.- 104.0 kg

www.sm-tech.ro

72 73

R1 R1

2R1

M.460 M.460.60

M.490.70

M60.90.01

M.460.R

M.490

M.360.R

M60.90.02


600 kN/m max.

1000 kN/m max.

800 kN/m max.

1000 kN/m max.

1000 kN/m max.


6050

16

35

60 22 85°85°

88° 88°

R 2R 3

R 2

R 2

6050

16

35

60 22 85°

R 2R 3

R 2

R 2

6035

10

22

60 16 60°

R 1,5R 3

R 2,5

R 2

9060

45

90 20

80°

80°

80°60°

R 4R 5

R 4

R 2

30

9070

30

45

90 20

80°

80°

80°60°

R 4R 5

R 4

R 2

606

18

60

60 10

R 3

R 1,5

R 2

60

6

1060

R 0,6

R 0,4

90°

90°

60

8

1260

R 0,8

R 0,5

90°

90°

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

Fe37

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

T70-88

T70-45

SU-T70 PB-T70

T70-60

T70-35

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

68

68

1625

20

1012

12

6688

12

R 3

R 3

R 1,2

R 1,6

R 0,8

R 135°

68

68

1625

20

1012

12

6688

12

R 3

R 2,75

R 1,2

R 1,6

R 0,8

R 145°

68

68

1625

20

1012

12

6688

12

R 3

R 2,75

R 0,8

R 0,8

R 0,5

R 0,860°

68

68

1625

20

1012

12

6688

12

R 3

R 2,75

R 0,8

R 2,75

R 0,4

R 0,588°

60

38

120

45M8

V (mm) 6 8 10 12 16 20kN/mmax. 600 600 600 600 800 800

V (mm) 6 8 10 12 16 20kN/mmax. 300 350 450 450 500 500

V (mm) 6 8 10 12 16 20kN/mmax. 400 400 500 500 700 700






Multi-V Dies

835 mm € 199.- 20.0 kg


835 mm € 205.- 20.0 kg


835 mm € 229.- 15.8 kg


835 mm € 618.- 38.9 kg


835 mm € 199.- 21.0 kg


835 mm € 229.- 15.7 kg


835 mm € 332.- 18.0 kg


835 mm € 618.- 35.9 kg






Multi-V Dies

Special Punches and Dies see pages 236-241

per pair

525 mm € 233.- 12.4 kg 20 mm € 54.- 0.2 kg

www.sm-tech.ro

74 75

R1 R1

2R1

TN80.14

TN80.30

TN80.20

INS14...

INS30...

INS20...

60

14

24

7518

15

60

20

35

7518

19

60

3830

507918

3011

19

1424

α

V

520

2035

α

V

524

α

3038

α

V

1219

31




TOP.SM-134.28.8 / TOP.SM-134.24.8

60

80

59

R 1

8

TOP.SM-134.24.10

60

80

59

R 1

10

TOP.SM-134.24.12

60

80

59

R 1

12

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

A

2XS

S S







Synthetic Dies Hemming Dies

For advantages and mounting examples see Mark-Free bending Chapter on pages 228-229

Compatible Hemming Punches see page 28





Model α V (mm)INS20.06.88 88° 6INS20.08.88 88° 8INS20.10.88 88° 10INS20.12.88 88° 12INS20.16.88 88° 16INS20.06.60 60° 6INS20.08.60 60° 8INS20.10.60 60° 10INS20.12.60 60° 12INS20.16.60 60° 16

Model α V (mm)INS14.06.88 88° 6INS14.08.88 88° 8INS14.10.88 88° 10INS14.06.60 60° 6INS14.08.60 60° 8INS14.10.60 60° 10

Model α V (mm)INS30.06.88 88° 6INS30.08.88 88° 8INS30.10.88 88° 10INS30.12.88 88° 12INS30.16.88 88° 16INS30.20.88 88° 20INS30.25.88 88° 25INS30.06.60 60° 6INS30.08.60 60° 8INS30.10.60 60° 10INS30.12.60 60° 12INS30.16.60 60° 16INS30.20.60 60° 20

Model α V (mm)INS20.06.45 45° 6INS20.08.45 45° 8INS20.10.45 45° 10INS20.12.45 45° 12INS20.06.30 30° 6INS20.08.30 30° 8INS20.10.30 30° 10

Model α V (mm)INS14.06.45 45° 6INS14.08.45 45° 8INS14.10.45 45° 10INS14.06.30 30° 6INS14.08.30 30° 8

Model α V (mm)INS30.06.45 45° 6INS30.08.45 45° 8INS30.10.45 45° 10INS30.12.45 45° 12INS30.16.45 45° 16INS30.20.45 45° 20INS30.06.30 30° 6INS30.08.30 30° 8INS30.10.30 30° 10INS30.12.30 30° 12INS30.16.30 30° 16

835 mm € 286.- 15.0 kg

415 mm € 157.- 7.5 kg

835 mm € 286.- 19.0 kg

415 mm € 157.- 9.5 kg

835 mm € 286.- 25.0 kg

415 mm € 157.- 12.5 kg

835 mm € 145.- 0.50 kg

415 mm € 82.- 0.25 kg

835 mm € 145.- 0.40 kg

415 mm € 83.- 0.20 kg

835 mm € 132.- 0.30 kg

415 mm € 77.- 0.15 kg

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

www.sm-tech.ro

76 77

R1 R1

2R1

S101.35.06 KPN

S101.35.10 S101PN.35.06

S135.26.08 S101PN.35.10

SA135.26.12 S135PN.26.10 SA135PN.26.12

S135.26.10 S135PN.26.08

S101.35.08

S110.30.08 S101PN.35.08

600 kN/m max.



1000 kN/m max. 1000 kN/m max. 1000 kN/m max.


600 kN/m max.


A

2XS

S S

9 96

101

R 1,0

35°

60

1361

8 88

101

R 1,0

35°

60

1361

7 710

101

R 1,0

35°

60

1361

8,5 118

110

R 1,5

30°

60

1565

135

26°

60

1577

8 1810 R 1,513

8

135

26°

60

1577

R 1,5

135

26°

60

1577

8 712 R 2,0

42Cr: 900-1150 N/mm2

9 96

101

R 1,0

35°

60

1361

8 88

101

R 1,0

35°

60

1361

7 710

101

R 1,0

35°

60

1361

R 1,513

8

135

26°

60

1577

135

26°

60

1577

8 712 R 2,0

135

26°

60

1577

8 1810 R 1,5

C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2

C45: 800-850 N/mm2 C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 800-850 N/mm2C45: 800-850 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2






Pneumatic Hemming Dies

The Hemming Dies can also be used as standard dies. Therefore, the spring is secured with help of a mechanical system.

demonstration of hemming dies at: www.rolleritools.com/videos/hemming-dies

Rolleri Videos


Accessories for pneumatic hemming dies

The complete pneumatic system is located within the die.

Spring-loaded Hemming Dies

Our Advantage – Your Convenience

835 mm € 542.- 30.0 kg

415 mm € 315.- 15.4 kg

835 mm € 542.- 30.0 kg

415 mm € 315.- 15.5 kg

835 mm € 936.- 30.0 kg

415 mm € 737.- 15.5 kg

835 mm € 961.- 39.8 kg

415 mm € 528.- 21.0 kg

835 mm € 936.- 29.0 kg

415 mm € 737.- 15.5 kg

835 mm € 682.- 41.0 kg

415 mm € 439.- 20.5 kg

835 mm € 1,062.- 41.5 kg

415 mm € 815.- 20.7 kg

835 mm € 1,181.- 41.0 kg

415 mm € 872.- 20.5 kg

835 mm € 542.- 30.0 kg

415 mm € 315.- 15.0 kg

835 mm € 566.- 30.0 kg

415 mm € 328.- 15.0 kg

835 mm € 936.- 31.0 kg

415 mm € 737.- 15.5 kg

835 mm € 644.- 41.5 kg

415 mm € 380.- 20.7 kg

835 mm € 1,426.- 39.8 kg

415 mm € 1,039.- 21.0 kg

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 150.8 3.0 12 201.0 3.5 15 25

1.25 3.5 17 261.5 4.6 22 382.0 5.5 30 502.5 6.5 55 -3.0 8.0 70 -

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 350.8 1.6 32 501.0 1.0 40 60

1.25 2.5 50 801.5 3.0 63 952.0 4.0 80 1302.5 5.0 90 -3.0 6.0 100 -

www.sm-tech.ro

78 79

R1 R1

2R1

C 2000/S / C 2500/S / C 3000/S / C 4000/S TC 2000/S / TC 2500/S / TC 3000/S / TC 4000/S

C 1050/R

60

M8

97

2712

M8

3010

6080

60

90120

35

15

M8

3010

6080

2

C 1050/RS

C 1050-90

M8

60

13,1

3520

,5

AD5 AD6

60

13,1

60

20,5

60

13,1

30 20,5

AD7

6013

4020

CTS60

6055

12

AD9-12.7 1000 kN/m max.1000 kN/m max.

1000 kN/m max.


60

4019

12,77

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2






Adpater Rails for Dies Die Adapters

Do you have further queries about delivery times, op-erational areas, and other options? Give us a call!

Model Length Price Weight

C 2000/S 2100 mm € 518.- 27.0 kg

C 2500/S 2600 mm € 639.- 34.0 kg

C 3000/S 3100 mm € 761.- 40.0 kg

C 4000/S 4100 mm € 967.- 53.0 kg


TC 2000/S 2100 mm € 543.- 30.0 kg

TC 2500/S 2600 mm € 673.- 37.0 kg

TC 3000/S 3100 mm € 766.- 44.0 kg

TC 4000/S 4100 mm € 1,065.- 59.0 kg


C 1050/R 1050 mm € 177.- 15.0 kg

C 1050/R/C 520 mm € 101.- 7.5 kg


C 1050-90 1050 mm € 290.- 27.2 kg

C 1050-90/C 520 mm € 174.- 13.5 kg


C 1050/RS 1050 mm € 233.- 15.0 kg

C 1050/RS/C 520 mm € 134.- 7.5 kg

Rolleri Type RX LVD Rolleri Type R1

Die Extensions

NEW1000 mm € 226.- 26.1 kg

500 mm € 125.- 13.0 kg

1000 mm € 201.- 12.0 kg

500 mm € 104.- 6.0 kg

835 mm € 254.- 18.0 kg

415 mm € 149.- 9.0 kg

835 mm € 213.- 29.0 kg

415 mm € 129.- 14.5 kg

835 mm € 219.- 19.6 kg

415 mm € 132.- 9.7 kg

Rolleri Type R1 Rolleri Type R2/R3


Rolleri Type R2/R3 Rolleri Type R1

www.sm-tech.ro

3R2

PUNCHES ROLLERI TYPE R2Content Explanation 82 - 84

90° Punches 85

86° Punches 85 - 86

80° Punches 87

60° Punches 88

28° Punches 89 - 90

28°/24° Hemming Tools 91

Z-Pro� le Tools 92

Radius Tools 93 - 94

Punch Extensions 95

Punch Adapters 95

Punches Rolleri Type R2 are compatible with press brake machines from:Hämmerle-Bystronic, LVD, Trumpf or on press brake machines with System NSCL(New Standard Clamping)


Compatibility

www.sm-tech.ro

3R2

82 83

R2 R2

QuickLock

Druck-�äche

Druck-linie

20

40,5

58,

5 16,5

R

α

60

2020

35,8

11,5

58,

5 15,2

5

R

α

2040

,5

58,

5 16,5

R

α







Punches Rolleri Type R2 are:• compatible with press brake machines from:

Bystronic-Hämmerle, LVD, Trumpf or onpress brake machines with System NSCL(New Standard Clamping)

• also applicable on all other press brake machines with adapter-systems (see page 214).

All punches Rolleri Type R2 can be equipped with three di� erent clamping systems. 1. QuickLock 2. Safety Pins3. ROL-System

ATTENTION:

QuickLockBy default, all tools are delivered with the QuickLock system, provided that these weigh less than 12 kg. This applies to most sectioned tools and to some standard length tools.If you prefer the QuickLock-System on tools which weigh more than 12 kg, it is possible to section the tool for a small surcharge.

Safety Pins All tools that weigh more than 12 kg, are delivered by default with safety pins. This applies to all standard tool lengths and some segmented tools.

ROL1-SystemAlternatively, you have the option of using tools with spring-loaded balls. Also here the max. weight is 12.5 kg per tool.

If you have any questions, please call to be assisted by one of our representatives!

Depending on each type, the punches are either head-bearing or shoulder-bearing.

press force line

press force line

pressforcesurface

pressforcesurface



Tang

Clamping Systems


• horizontal tool exchange

• vertical tool exchange• easy handling • substantial savings on equipment costs• applicable on tools < 12.0 kg • applicable on tools > 12.0 kg through

special sectioning possible

• vertical tool exchange through spring-loaded balls, which are built into the tool

• increased longevity • easy handling• requires hardened tang • applicable on tools < 12.5 kg

Safety Pins (Standard)

QuickLock (Standard)

ROL1-System

QuickLock System:www.rolleritools.com/videos/quicklock

Rolleri VideosThe raw material is obtained from quali� ed suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength.






Material


www.sm-tech.ro

3R2

84 85

R2 R2

31R 20

120°

12

25

R 25

10

1250 / 2050 / 2550 / 3050 / 4050 mm 1250 / 2050 / 2550 / 3050 / 4050 mm

1 2

TPR237.90.R06 TPR237.90.R12600 kN/m max. 1000 kN/m max.

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

20

90°R 1,2

237

TPR135.86.R1 650 kN/m max. TPR157.86.R1 800 kN/m max.

40

20

0

20

40

60

60

80

0

!!

20

157

32

86°R 1

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

197

237

20

90°R 0,6

25

40

20

0

20

40

60

0

20

!!

135

50

86°R 1

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1

2

2

2

2

250

303540455025 25

550

100

100

20040 35 30 25 20

495

170100 50 45 40 35 30 25

500 mm

515 mm

525 mm






250 mm segmented / FC (7 segments)


Standard

Horn 2for all segmentedPunches Rolleri Type R2 of Length 550 mm

Horn 1Standard for all segmentedPunches Rolleri Type R2

Sectioning FA Sectioning FB

550 mm segmented / FW

(8 segments)

495 mm segmented / F

(8 segments)



Tool Lengths and Sectioning

Horn Types

90° Punches

NEW

NEW

NEW

500 mm € 292.- 15.0 kg

FC 250 mmsegmented € 292.- 7.5 kg

FW 550 mmsegmented € 579.- 16.5 kg

Sect

ioni

ng FA

1250 mm € 956.- 37.5 kg

2050 mm € 1,480.- 61.5 kg

2550 mm € 1,807.- 77.0 kg

3050 mm € 2,135.- 92.0 kg

4050 mm € 2,789.- 121.5 kg

Sect

ioni

ng FB

1250 mm € 795.- 37.5 kg

2050 mm € 1,226.- 61.5 kg

2550 mm € 1,502.- 76.5 kg

3050 mm € 1,779.- 92.0 kg

4050 mm € 2,332.- 121.5 kg

Segments of Sectioning FB(300, 200, 100, 100 Horn l., 100 Horn r., 50,

45, 40, 35, 30, 25) are also available separately (FD). Prices upon request!

only for550 mm segm.

515 mm € 345.- 12.3 kg


515 mm € 435.- 17.5 kg


515 mm € 396.- 19.0 kg


Please choose the clamping system! Standard-Equipping: < 12 kg QuickLock > 12 kg safety pins Also available: ROL1-System see pages 82-83 for more information.

86° Punches

Lengthin mm 25 30 35 40 45 50 100

Horn l.100

Horn r. 100 200 300

1250 2 1 1 1 1 1 1 1 1 2 1

2050 2 1 1 1 1 1 1 1 1 3 3

2550 2 1 1 1 1 1 1 1 1 4 4

3050 2 1 1 1 1 1 1 1 1 5 5

4050 2 1 1 1 1 1 1 1 1 7 7

Lengthin mm 25 30 35 40 45 50 100

Horn l.100

Horn r. 100

1250 2 1 1 1 1 1 1 1 8

2050 2 1 1 1 1 1 1 1 16

2550 2 1 1 1 1 1 1 1 21

3050 2 1 1 1 1 1 1 1 26

4050 2 1 1 1 1 1 1 1 36

HORN HORN

HORN

HORN

HORN

HORN

HORN

Horn

Horn

www.sm-tech.ro

3R2

86 87

R2 R2

40

20

0

20

40

60

80

100

120

60

80

100

120

140

160

0

!!

220

20

256

5252525252

86°R 1

TPR256.86.R1

TPR237.86.R1

800 kN/m max.

500 kN/m max.

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

20

86°R 1

55

197

237

TPR157.86.R1-A 800 kN/m max.

40

20

0

20

40

60

60

80

0

!!

20

157

12

86°R 1

40

20

0

20

40

60

80

100

120

60

80

100

120

140

160

0

!!

220

20

256

3232323232

86°R 1

10,1

TPR256.86.R1-A 800 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

1

1

2

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

20

80°R 1

30

197

237

TPR237.80.R1 800 kN/m max.TPR200.80.R1 800 kN/m max.

40

20

0

20

40

60

80

100

60

80

100

!!

20

80°R 1

30

200

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

2 2

2

2 2

1






Sect

ioni

ng FA

1250 mm € 763.- 31.3 kg

2050 mm € 1,180.- 51.3 kg

2550 mm € 1,440.- 63.8 kg

3050 mm € 1,701.- 76.3 kg

4050 mm € 2,222.- 101.3 kgSe

ctio

ning

FB1250 mm € 634.- 31.3 kg

2050 mm € 978.- 51.3 kg

2550 mm € 1,199.- 63.8 kg

3050 mm € 1,418.- 76.3 kg

4050 mm € 1,860.- 101.3 kg



80° Punches

NEW NEWNEW515 mm € 540.- 23.0 kg

FW 550 mmsegmented € 1,003.- 24.6 kg

500 mm € 233.- 12.5 kg




Sect

ioni

ng FA

1250 mm € 2,630.- 82.5 kg

2050 mm € 4,070.- 136.0 kg

2550 mm € 4,971.- 189.0 kg

3050 mm € 5,871.- 202.0 kg

4050 mm € 7,671.- 268.0 kg

Sect

ioni

ng FB

1250 mm € 2,185.- 82.5 kg

2050 mm € 3,372.- 136.0 kg

2550 mm € 4,133.- 169.0 kg

3050 mm € 4,893.- 201.3 kg

4050 mm € 6,413.- 267.3 kg



Sect

ioni

ng FA

1250 mm € 2,183.- 62.5 kg

2050 mm € 3,378.- 102.5 kg

2550 mm € 4,126.- 127.5 kg

3050 mm € 4,872.- 152.5 kg

4050 mm € 6,367.- 202.5 kg

Sect

ioni

ng FB

1250 mm € 1,814.- 62.5 kg

2050 mm € 2,799.- 102.5 kg

2550 mm € 3,430.- 127.5 kg

3050 mm € 4,061.- 152.5 kg

4050 mm € 5,323.- 202.5 kg



500 mm € 735.- 33.0 kg



500 mm € 555.- 28.5 kg






515 mm € 435.- 19.7 kg


515 mm € 378.- 19.0 kg


86° Punches

HORN

HORN

HORN

HORN

HORN HORN

HORN HORN

HORN

www.sm-tech.ro

3R2

88 89

R2 R2

40

20

0

20

40

60

80

100

120

60

80

100

120

140

160

0

!!

220

20

256

60°R 4

TPR256.60.R4TPR237.60.R3

TPR157.60.R1 TPR157.60.R4



40

20

0

20

40

60

60

80

0

!!

20

157

60°R 1

40

20

0

20

40

60

60

80

0

!!

20

157

60°R 4

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

20

60°R 3

237

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1 1

1

2

40

20

0

20

40

60

80

100

120

60

80

100

120

140

0

!!

20

28°R 1

24

197

237

TPR237.28.R1 600 kN/m max. TPR256.28.R1 600 kN/m max.

40

20

0

20

40

60

80

100

120

60

80

100

120

140

160

0

!!

220

20

256

28°R 1

30303030

TPR176.28.R1TPR157.28.R1 400 kN/m max.600 kN/m max.

40

20

0

20

40

60

60

80

0

!!

20

157

28°R 1

40

20

0

20

40

60

80

60

80

100

0

!!

20

175,

8

28°R 1

60

24

70

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

11

1

42Cr: 900-1150 N/mm2

2

2 2 2 2

2 2






NEW NEW

60° Punches

Sect

ioni

ng FA

1250 mm € 956.- 37.5 kg

2050 mm € 1,480.- 61.5 kg

2550 mm € 1,807.- 77.0 kg

3050 mm € 2,135.- 92.0 kg

4050 mm € 2,789.- 121.5 kg

Sect

ioni

ng FA

1250 mm € 629.- 30.0 kg

2050 mm € 974.- 49.2 kg

2550 mm € 1,190.- 61.2 kg

3050 mm € 1,406.- 73.2 kg

4050 mm € 1,837.- 97.2 kg

Sect

ioni

ng FA

1250 mm € 2,393.- 68.0 kg

2050 mm € 3,703.- 111.0 kg

2550 mm € 4,523.- 138.0 kg

3050 mm € 5,342.- 165.0 kg

4050 mm € 6,980.- 219.0 kg

Sect

ioni

ng FB

1250 mm € 795.- 37.5 kg

2050 mm € 1,226.- 61.5 kg

2550 mm € 1,502.- 76.5 kg

3050 mm € 1,779.- 92.0 kg

4050 mm € 2,332.- 121.5 kg

Sect

ioni

ng FB

1250 mm € 522.- 30.0 kg

2050 mm € 807.- 49.2 kg

2550 mm € 989.- 61.2 kg

3050 mm € 1,171.- 73.2 kg

4050 mm € 1,535.- 97.2 kg

Sect

ioni

ng FB

1250 mm € 1,988.- 68.0 kg

2050 mm € 3,068.- 111.0 kg

2550 mm € 3,761.- 138.0 kg

3050 mm € 4,452.- 165.0 kg

4050 mm € 5,836.- 219.0 kg







515 mm € 410.- 18.8 kg


500 mm € 292.- 15.0 kg



500 mm € 192.- 12.0 kg



500 mm € 608.- 26.1 kg






28° Punches

Sect

ioni

ng FA

1250 mm € 1,356.- 37.5 kg

2050 mm € 2,097.- 61.5 kg

2550 mm € 2,561.- 76.5 kg

3050 mm € 3,024.- 91.5 kg

4050 mm € 3,951.- 121.5 kg

Sect

ioni

ng FA

1250 mm € 798.- 25.0 kg

2050 mm € 1,236.- 41.0 kg

2550 mm € 1,509.- 51.0 kg

3050 mm € 1,782.- 61.0 kg

4050 mm € 2,330.- 81.0 kg

Sect

ioni

ng FB

1250 mm € 1,126.- 37.5 kg

2050 mm € 1,738.- 61.5 kg

2550 mm € 2,129.- 76.5 kg

3050 mm € 2,522.- 91.5 kg

4050 mm € 3,306.- 121.5 kg

Sect

ioni

ng FB

1250 mm € 663.- 25.0 kg

2050 mm € 1,025.- 41.0 kg

2550 mm € 1,256.- 51.0 kg

3050 mm € 1,485.- 61.0 kg

4050 mm € 1,948.- 81.0 kg





500 mm € 223.- 10.0 kg



500 mm € 413.- 15.0 kg






Sect

ioni

ng FA

1250 mm € 2,243.- 62.5 kg

2050 mm € 3,471.- 102.5 kg

2550 mm € 4,240.- 127.5 kg

3050 mm € 5,008.- 152.5 kg

4050 mm € 6,544.- 202.5 kg

Sect

ioni

ng FB

1250 mm € 1,862.- 62.5 kg

2050 mm € 2,876.- 102.5 kg

2550 mm € 3,524.- 127.5 kg

3050 mm € 4,173.- 152.5 kg

4050 mm € 5,470.- 202.5 kg



515 mm € 456.- 15.0 kg


500 mm € 570.- 25.0 kg




HORN HORN

HORN

HORN

HORNHORN

HORN

HORN

HORN HORN HORN HORN

HORN HORN

www.sm-tech.ro

3R2

90 91

R2 R2TPR276.28.R1 400 kN/m max.

40

20

0

20

40

60

80

100

120

60

80

100

120

140

160

0

!!24

0

70

20

276

28°R 1

60

24,5

42Cr: 900-1150 N/mm2

1

TPR.SP.195.28.8 TPR.SP.195.24.8

TPR.SP.195.24.12TPR.SP.195.24.10

40

20

0

20

40

60

80

100

60

80

100

!!

155

58

195

24°R 0,6

10

26

40

20

0

20

40

60

80

100

60

80

100

!!

155

58

195

24°R 0,6

8

25

40

20

0

20

40

60

80

100

60

80

100

!!

155

58

195

28°R 0,6

8

25

40

20

0

20

40

60

80

100

60

80

100

!!

155

58

195

24°R 0,6

12

26

A

2XS

S S


42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

2






28° Punches

Sect

ioni

ng FA

1250 mm € 2,630.- 60.0 kg

2050 mm € 4,070.- 98.4 kg

2550 mm € 4,971.- 122.4 kg

3050 mm € 5,871.- 146.4 kg

4050 mm € 7,671.- 194.4 kg

Sect

ioni

ng FB

1250 mm € 2,185.- 60.0 kg

2050 mm € 3,372.- 98.4 kg

2550 mm € 4,133.- 122.4 kg

3050 mm € 4,893.- 146.4 kg

4050 mm € 6,413.- 194.4 kg




Rolleri Videos

500 mm € 668.- 24.0 kg





28°/24° Hemming Punches

Only for thin material!

Hemming Dies see page 118


525 mm € 593.- 9.4 kg

F 495 mmsegmented € 939.- 8.9 kg

525 mm € 593.- 9.4 kg


525 mm € 593.- 15.5 kg


525 mm € 593.- 15.5 kg


NEW

HORN

HORN

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

www.sm-tech.ro

3R2

92 93

R2 R2

C45: 560-710 N/mm2

TPZ 1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

C45: 560-710 N/mm2

C45: 560-710 N/mm2

4613

123

40

2073

23

4525

Z

Sα

23

37

Z

Sα

Z

Sα



TPR143.10 TPR136.151000 kN/m max. 1000 kN/m max.

1000 kN/m max.

M6

HRC 60-62

R

143

102,

5040

,50

R 10

R 25

136

100

36

R 15

R 40

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

C53: 610-760 N/mm2

TOP.C10TOP.C15

TOP.C25TOP.C40






Z-Pro� le Tools

Z- Pro� le Tool Inserts 160° / 150° / 140° / 90°

Model Z (mm) α S* (mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 1.0 1.0 160° 1.2 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5 1.5 160° 1.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0 2.0 150° 1.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5 2.5 140° 1.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.0/90 1.0 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5/90 1.5 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0/90 2.0 90° 0.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5/90 2.5 90° 0.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 3.0 3.0 90° 1.0 € 350.- 10.3 kg € 214.- 5.1 kg

CEZ 3.5 3.5 90° 1.0 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.0 4.0 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.5 4.5 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.0 5.0 90° 1.3 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.5 5.5 90° 1.4 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.0 6.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.5 6.5 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.0 7.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.5 7.5 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 8.0 8.0 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg


Z- Pro� le Tool Inserts 90°

Model Z (mm) α S* (mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 9.0 9 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 10.0 10 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 11.0 11 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 12.0 12 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 13.0 13 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 14.0 14 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 15.0 15 90° 2.3 € 389.- 13.5 kg € 237.- 6.5 kg


Radius punches: R10-40Model R (mm)

525 m

m

Price Weight

495 m

m se

gmen

ted

Price Weight

TOP.C10 10 € 40.- 1.3 kg € 154.- 2.7 kg

TOP.C12.5 12.5 € 42.- 2.0 kg € 207.- 2.8 kg

TOP.C15 15 € 48.- 3.0 kg € 237.- 3.8 kg

TOP.C17.5 17.5 € 53.- 4.0 kg € 244.- 4.7 kg

TOP.C20 20 € 60.- 5.2 kg € 287.- 6.6 kg

TOP.C25 25 € 89.- 8.1 kg € 386.- 7.5 kg

TOP.C30 30 € 116.- 11.7 kg € 488.- 11.3 kg

TOP.C35 35 € 176.- 16.0 kg € 605.- 15.1 kg

TOP.C40 40 € 227.- 20.7 kg € 662.- 19.5 kg

Radius Punches by Rolleri also sectioned on stock! Take advatage of this � exibility!

Material C53 induction hard-ened 60-62HRc

For Radius tools with R10-R25(TOP.C10-TOP.C25) see below


Radius punches

525 mm € 278.- 18.0 kg


525 mm € 582.- 25.0 kg


Do you prefer theQuickLock or ROL1-System? Send us an email or give us a call!

835 mm € 890.- 46.0 kg

415 mm € 498.- 23.0 kg

www.sm-tech.ro

3R2

94 95

R2 R2E30.22 800 kN/m max.

30

22 17

14M8

800 kN/m max.

800 kN/m max.

AH

Ø

14

M8

Ø

H

M8

TPR140-14 800 kN/m max.

!!

140

40

14

20

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

AD21

AD11

1500 kN/m max.

1000 kN/m max.

42Cr: 900-1150 N/mm2

20

35,8

010

0

60

20

14

4050

120






Radius Tools

Radius Tool: Ø 25-100

Radius Tool: Ø 16-20

For Radius tools with R8-R50(C13.08-C70.50) and hemming tool(E 30.22) see below

Hemming tool


835 m

m

Price Weight

415 m

m

Price Weight

C17.12 25 17 22 € 82.- 2.5 kg € 50.- 1.2 kg

C20.15 30 20 27 € 72.- 3.7 kg € 43.- 1.8 kg

C22.17 35 22 32 € 104.- 5.0 kg € 59.- 2.4 kg

C24.20 40 24 34 € 88.- 7.0 kg € 54.- 3.5 kg

C29.25 50 29 39 € 96.- 10.0kg € 55.- 4.7 kg

C34.30 60 34 44 € 116.- 13.5 kg € 71.- 6.7 kg

C45.35 70 45 55 € 234.- 20.3 kg € 128.- 10.0 kg

C45.40 80 45 55 € 268.- 23.0 kg € 144.- 11.5 kg

C60.45 90 60 70 € 325.- 34.0 kg € 175.- 17.0 kg

C70.50 100 70 80 € 342.- 43.5 kg € 195.- 21.7 kg


835 m

m

Price Weight

415 m

m

Price Weight

C13.08 16 13 € 59.- 2.00 kg € 36.- 1.00 kg

C13.09 18 16 € 59.- 2.00 kg € 36.- 1.00 kg

C16.10 20 16 € 50.- 2.00 kg € 30.- 1.00 kg

Punch Extensions


Punch Adapters

For more Adpaters see pages 212-217

830 mm € 280.- 17.0 kg

412 mm € 160.- 9.0 kg

150 mm € 258.- 7.0 kg

150 mm € 102.- 3.0 kg

835 mm € 89.- 3.5 kg

415 mm € 50.- 1.7 kg

www.sm-tech.ro

4R2

DIES ROLLERI TYPE R2Content Explanation 98 - 99

Dies H=55 mm - 85 mm 100

Dies 90°, H=100 mm 101

Dies 86°, H=100 mm 101 - 103

Dies 84°, H=100 mm 103 - 104

Dies 80°, H=100 mm 105

Dies 60°, H=120 mm 106

Dies 30°, H=100 mm 106 - 108

Dies 86°, H=150 mm 109 - 110

Dies 84°, H=150 mm 110 - 111

Dies 80°, H=150 mm 112

Dies 30°, H=150 mm 113 - 114

Die Adapters 115

Synthetic Dies, H=100 mm 116

Hemming Dies 118 - 119

Dies Rolleri Type R2 are compatible with press brake machines from:Hämmerle-Bystronic, LVD, Trumpf or on press brake machines with System NSCL(New Standard Clamping)


Compatibility

www.sm-tech.ro

98 99

R2 R2

4R2

60

10

2010

13

1250 / 2050 / 2550 / 3050 / 4050 mm 1250 / 2050 / 2550 / 3050 / 4050 mm

250

50 45 40 35 30 25 25

550

200100

100 40 35 30 25 20

495

170100 50 45 40 3035 25

1100

400

200100

100 75 60 50 40 30 20 15 10

500 mm

515 mm

525 mm

1000 mm

20

13

B







Dies Rolleri Type R2 are:• compatible with press brake machines with a table

groove for pins 13 x 20 mm:Bystronic-Hämmerle, Trumpf

• also applicable on all other press brake machines with Adapter-Systems and Adapter Rails(see pages 218-221).

All dies Rolleri Type R2 are by default equipped with a 13 x 20 mm tail.

In order to also use Rolleri Type R1 Dies, a 10 mm groove is milled and a percise grounded wedge bar /tail in 13 x 30 mm is inserted.

For more speci� c information and prices go to page 252 in the Service Chapter.


Groove

Die Rolleri Type R1

Wedge Bar / Tail


Tang Modi� cation: Wedge Bar / Tail

A30 (Mounting example)


Standard

Sectioning FA Sectioning FB


550 mm segmented / FW (8 segments)


495 mm segmented / F (8 segments)



Lengthin mm 25 30 35 40 45 50 100

1250 2 1 1 1 1 1 10

2050 2 1 1 1 1 1 18

2550 2 1 1 1 1 1 23

3050 2 1 1 1 1 1 28

4050 2 1 1 1 1 1 38

Lengthin mm 25 30 35 40 45 50 100 200 300 500

1250 2 1 1 1 1 1 3 2 1 0

2050 2 1 1 1 1 1 3 1 1 2

2550 2 1 1 1 1 1 3 1 1 3

3050 2 1 1 1 1 1 3 1 1 4

4050 2 1 1 1 1 1 3 1 1 6


Inner radius 54-60 HRC

press force line








Material

www.sm-tech.ro

100 101

R2 R2

4R2

V

2015

55

13

D

F

90°

R

V

2015

55

13

D

F

88°

R

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

V

20H

13F

α

R

V

2015

H

13

D

F

30°

R

1200 kN/m max.

12

100

1325

20

90°

R 3,0

TMR100.06.86TMR100.04.86

TMR100.08.86 WMR100.08.86

6

100

20

1320

86°

R 0,6

8

100

201320

86°

R 0,8



4

100

20

13

8

20

86°

R 0,6

8

100

1325

16

86°

R 2,5

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Model V (mm)

R (mm)

D (mm)

F (mm)

kN/mmax.

1000

mm

Price Weight

500 m

m

Price Weight

1100

mm

segm

ente

d

Price Weight

BMR55.06.90 6 0.4 15 25 1150 € 265.- 8.5 kg € 141.- 4.2 kg € 436.- 8.5 kg

BMR55.08.90 8 0.5 15 25 1100 € 265.- 9.0 kg € 141.- 4.5 kg € 436.- 8.5 kg

BMR55.10.90 10 1.0 20 25 1100 € 250.- 10.5 kg € 134.- 5.2 kg € 479.- 10.0 kg

BMR55.12.90 12 1.5 20 25 1200 € 250.- 10.5 kg € 134.- 5.2 kg € 432.- 10.0 kg

BMR55.16.90 16 2.0 30 30 1200 € 278.- 14.5 kg € 141.- 7.2 kg € 479.- 14.0 kg

Model V (mm)

R (mm)

D (mm)

F (mm)

kN/mmax.

1000

mm

Price Weight

500 m

m

Price Weight

1100

mm

segm

ente

d

Price Weight

BMR55.10.88 10 1.0 20 25 1100 € 250.- 11.0 kg € 134.- 5.0 kg € 432.- 12.0 kg

BMR55.12.88 12 1.5 20 25 1200 € 250.- 10.5 kg € 134.- 5.2 kg € 432.- 10.0 kg

BMR55.16.88 16 2.0 30 30 1200 € 278.- 14.5 kg € 141.- 7.2 kg € 479.- 14.0 kg

BMR55.20.88 20 2.0 30 30 1100 € 288.- 14.5 kg € 146.- 7.2 kg € 492.- 14.0 kg

BMR55.24.88 24 3.0 40 40 1200 € 334.- 18.5 kg € 190.- 9.2 kg € 548.- 18.0 kg

Model V (mm)

R (mm)

D (mm)

H (mm)

F (mm)

kN/mmax.

1000

mm

Price Weight

500 m

m

Price Weight

1100

mm

segm

ente

d

Price Weight

BMR55.06.30 6 0.6 15 55 25 350 € 322.- 8.0 kg € 176.- 4.0 kg € 505.- 9.0 kg

BMR55.08.30 8 0.8 15 55 25 200 € 322.- 9.2 kg € 176.- 4.0 kg € 505.- 10.1 kg

BMR55.10.30 10 1.0 20 55 25 350 € 300.- 10.0 kg € 168.- 5.0 kg € 492.- 11.0 kg

BMR55.12.30 12 1.5 20 55 25 300 € 300.- 10.0 kg € 168.- 5.0 kg € 492.- 11.0 kg

BMR55.16.30 16 2.0 30 55 30 450 € 334.- 13.5 kg € 171.- 6.7 kg € 543.- 14.9 kg

BMR55.20.30 20 2.5 35 55 35 500 € 348.- 14.0 kg € 185.- 7.0 kg € 574.- 13.5 kg

BMR55.24.30 24 3.0 40 55 40 550 € 363.- 15.5 kg € 210.- 7.8 kg € 590.- 17.0 kg

BMR60.32.30 32 4.0 60 60 60 650 € 505.- 23.0 kg € 291.- 11.5 kg € 783.- 22.5 kg

BMR70.08.30 08 0.75 20 70 25 200 € 322.- 13.1 kg € 183.- 6.5 kg € 569.- 14.0 kg

BMR70.10.30 10 1.0 20 70 25 350 € 322.- 12.8 kg € 183.- 6.4 kg € 569.- 12.4 kg

BMR70.12.30 12 1.5 25 70 25 300 € 322.- 14.7 kg € 183.- 7.3 kg € 569.- 14.3 kg

BMR70.16.30 16 2.0 30 70 30 450 € 322.- 16.7 kg € 183.- 8.3 kg € 569.- 16.2 kg

Model α V (mm)

R (mm)

H (mm)

F (mm)

kN/mmax.

1000

mm

Price Weight50

0 mm

Price Weight

1100

mm

segm

ente

d

Price Weight

BMR55.32.85 85 32 4.0 55 50 1200 € 385.- 21.0 kg € 214.- 10.5 kg € 599.- 20.5 kg

BMR55.40.85 85 40 4.0 55 55 1200 € 402.- 21.5 kg € 228.- 10.7 kg € 634.- 25.0 kg

BMR65.80.80 80 80 10.0 65 100 1700 € 884.- 39.0 kg € 495.- 20.0 kg € 1,387.- 43.0 kg

BMR85.100.80 80 100 12.0 85 125 2300 € 1,046.- 62.0 kg € 586.- 31.0 kg € 1,642.- 69.0 kg

BMR55.40.60 60 40 5.0 55 55 1300 € 545.- 20.3 kg € 306.- 10.5 kg € 856.- 22.3 kg

BMR55.50.60 60 50 5.0 55 70 1200 € 636.- 25.0 kg € 357.- 12.0 kg € 997.- 21.0 kg

BMR65.60.60 60 60 7.0 65 80 1100 € 732.- 31.0 kg € 410.- 15.5 kg € 1,147.- 34.1 kg

Dies, H=55 mm / H=60 mm / H=65 mm / H=70 mm / H=85 mm

90° Dies, H=55 mm

88° Dies, H=55 mm

30° Dies, H=55 mm / H=60 mm / H=70 mm

85° / 80° / 60° Dies, H=55 mm / H=65 mm / H=85 mm

Individual drawings see pages 138-142

WMR100.12.90

Dies 90°, H=100 mm

Sect

ioni

ng FA

1250 mm € 814.- 11.3 kg

2050 mm € 1,257.- 18.5 kg

2550 mm € 1,538.- 23.0 kg

3050 mm € 1,816.- 27.5 kg

4050 mm € 2,371.- 36.5 kg

Sect

ioni

ng FA

1250 mm € 640.- 12.5 kg

2050 mm € 988.- 20.5 kg

2550 mm € 1,208.- 25.5 kg

3050 mm € 1,427.- 30.5 kg

4050 mm € 1,863.- 40.5 kg

Sect

ioni

ng FB

1250 mm € 675.- 11.3 kg

2050 mm € 1,043.- 18.5 kg

2550 mm € 1,277.- 23.0 kg

3050 mm € 1,513.- 27.5 kg

4050 mm € 1,983.- 36.5 kg

Sect

ioni

ng FB

1250 mm € 531.- 12.5 kg

2050 mm € 820.- 20.5 kg

2550 mm € 1,004.- 25.5 kg

3050 mm € 1,189.- 30.5 kg

4050 mm € 1,558.- 40.5 kg

Segments of Sectioning FB(500, 300, 200, 100, 50, 45, 40, 35, 30, 25)

are also available separately (FD). Prices upon request!



Dies 86°, H=100 mm

NEW

NEW

515 mm € 236.- 9.0 kg


500 mm € 249.- 4.5 kg



500 mm € 196.- 8.9 kg



Sect

ioni

ng FA

1250 mm € 640.- 15.0 kg

2050 mm € 988.- 24.6 kg

2550 mm € 1,208.- 30.6 kg

3050 mm € 1,427.- 36.6 kg

4050 mm € 1,863.- 48.6 kg

Sect

ioni

ng FB

1250 mm € 531.- 15.0 kg

2050 mm € 820.- 24.6 kg

2550 mm € 1,004.- 30.6 kg

3050 mm € 1,189.- 36.6 kg

4050 mm € 1,558.- 48.6 kg



NEW515 mm € 213.- 7.7 kg


500 mm € 196.- 7.9 kg



www.sm-tech.ro

102 103

R2 R2

4R2

TMR100.10.86

WMR100.12.86

10

100

20

1320

86°

R 1,0

1100 kN/m max.

1200 kN/m max.

TMR100.12.86

12

100

20

1325

86°

R 1,0

1200 kN/m max.

12

100

1325

20

86°

R 3,0

TMR100.16.86

16

100

20

1330

86°

R 1,6

1200 kN/m max.

TMR100.24.86TMR100.20.86

20

100

20

1330

86°

R 2,0 24

100

20

1335

86°

R 2,5


42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

TMR100.30.86

30

100

20

1345

86°

R 3,0

1200 kN/m max. TMR100.40.86

TMR100.50.86

40

100

20

1355

86°

R 3,0

50

100

20

1375

86°

R 3,0

1200 kN/m max.

1500 kN/m max.

TMR100.06.84 TMR100.08.841200 kN/m max. 1150 kN/m max.

6

100

20

1320

84°

R 0,6 8

100

20

1320

84°

R 0,8

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Sect

ioni

ng FA

1250 mm € 691.- 21.8 kg

2050 mm € 1,069.- 35.7 kg

2550 mm € 1,305.- 44.4 kg

3050 mm € 1,542.- 53.1 kg

4050 mm € 2,015.- 70.5 kg

Sect

ioni

ng FA

1250 mm € 708.- 26.6 kg

2050 mm € 1,096.- 43.7 kg

2550 mm € 1,338.- 54.3 kg

3050 mm € 1,580.- 65.0 kg

4050 mm € 2,065.- 86.3 kg

Sect

ioni

ng FA

1250 mm € 778.- 27.5 kg

2050 mm € 1,203.- 45.0 kg

2550 mm € 1,469.- 56.0 kg

3050 mm € 1,735.- 67.0 kg

4050 mm € 2,266.- 89.0 kg

Sect

ioni

ng FB

1250 mm € 574.- 21.8 kg

2050 mm € 887.- 35.7 kg

2550 mm € 1,086.- 44.4 kg

3050 mm € 1,285.- 53.1 kg

4050 mm € 1,684.- 70.5 kg

Sect

ioni

ng FB

1250 mm € 588.- 26.6 kg

2050 mm € 908.- 43.7 kg

2550 mm € 1,113.- 54.3 kg

3050 mm € 1,317.- 65.0 kg

4050 mm € 1,726.- 86.3 kg

Sect

ioni

ng FB

1250 mm € 646.- 27.5 kg

2050 mm € 997.- 45.0 kg

2550 mm € 1,221.- 56.0 kg

3050 mm € 1,446.- 67.0 kg

4050 mm € 1,893.- 89.0 kg







Dies 86°, H=100 mm

515 mm € 236.- 9.0 kg


500 mm € 211.- 8.7 kg



500 mm € 217.- 10.0 kg



500 mm € 238.- 12.5 kg



Sect

ioni

ng FA

1250 mm € 857.- 35.0 kg

2050 mm € 1,325.- 57.4 kg

2550 mm € 1,619.- 71.4 kg

3050 mm € 1,912.- 85.4 kg

4050 mm € 2,498.- 113.0 kg

Sect

ioni

ng FA

1250 mm € 846.- 30.5 kg

2050 mm € 1,309.- 50.0 kg

2550 mm € 1,599.- 62.2 kg

3050 mm € 1,889.- 74.4 kg

4050 mm € 2,468.- 98.8 kg

Sect

ioni

ng FB

1250 mm € 711.- 35.0 kg

2050 mm € 1,099.- 57.4 kg

2550 mm € 1,346.- 71.4 kg

3050 mm € 1,593.- 85.4 kg

4050 mm € 2,089.- 113.0 kg

Sect

ioni

ng FB

1250 mm € 703.- 30.5 kg

2050 mm € 1,085.- 50.0 kg

2550 mm € 1,330.- 62.2 kg

3050 mm € 1,574.- 74.4 kg

4050 mm € 2,063.- 98.8 kg





500 mm € 261.- 14.0 kg



500 mm € 258.- 12.2 kg



Dies 86°, H=100 mm

Dies 84°, H=100 mm

Sect

ioni

ng FA

1250 mm € 916.- 45.0 kg2050 mm € 1,417.- 74.0 kg2550 mm € 1,730.- 92.0 kg3050 mm € 2,043.- 110.0 kg4050 mm € 2,670.- 146.0 kg

Sect

ioni

ng FA


Sect

ioni

ng FA

1250 mm € 640.- 22.0 kg2050 mm € 988.- 36.1 kg2550 mm € 1,208.- 44.9 kg3050 mm € 1,427.- 53.7 kg4050 mm € 1,863.- 71.3 kg

Sect

ioni

ng FA


Sect

ioni

ng FA


Sect

ioni

ng FB


Sect

ioni

ng FB


Sect

ioni

ng FB


Sect

ioni

ng FB


Sect

ioni

ng FB












500 mm € 280.- 17.6 kg



500 mm € 300.- 27.5 kg



500 mm € 196.- 8.8 kg



500 mm € 196.- 8.8 kg



500 mm € 295.- 20.0 kg



Die Adapters see pages 218-221

NEW NEW

NEW

www.sm-tech.ro

104 105

R2 R2

4R2

TMR100.10.84

TMR100.16.84

TMR100.24.84

TMR100.12.84

TMR100.20.84

1100 kN/m max.

1200 kN/m max.

1200 kN/m max.

1200 kN/m max.

1150 kN/m max.

24

100

20

1335

84°

R 2,5

10

100

20

1320

84°

R 1,0 12

100

20

1325

84°

R 1,0

16

100

20

1330

84°

R 1,6 20

100

20

1330

84°

R 2,0

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

TMR100.60.80

TMR100.80.80

TMR100.70.80

TMR120.90.80 TMR120.100.80

60

100

20

1375

80°

R 5,0 70

100

20

1385

80°

R 5,0

80

100

20

13100

80°

R 5,0

100

120

20

13120

80°

R 8,090

120

20

13110

80°

R 8,0

1500 kN/m max.

1500 kN/m max.

1500 kN/m max.

1500 kN/m max.

1500 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies 84°, H=100 mm

Sect

ioni

ng FA

1250 mm € 691.- 21.8 kg

2050 mm € 1,069.- 35.7 kg

2550 mm € 1,305.- 44.4 kg

3050 mm € 1,542.- 53.1 kg

4050 mm € 2,015.- 70.5 kg

Sect

ioni

ng FA

1250 mm € 708.- 25.0 kg

2050 mm € 1,096.- 41.0 kg

2550 mm € 1,338.- 51.0 kg

3050 mm € 1,580.- 61.0 kg

4050 mm € 2,065.- 81.0 kgSe

ctio

ning

FB1250 mm € 574.- 21.8 kg

2050 mm € 887.- 35.7 kg

2550 mm € 1,086.- 44.4 kg

3050 mm € 1,285.- 53.1 kg

4050 mm € 1,684.- 70.5 kg

Sect

ioni

ng FB

1250 mm € 588.- 25.0 kg

2050 mm € 908.- 41.0 kg

2550 mm € 1,113.- 51.0 kg

3050 mm € 1,317.- 61.0 kg

4050 mm € 1,726.- 81.0 kg





NEW NEW500 mm € 211.- 8.7 kg



500 mm € 217.- 10.0 kg



Sect

ioni

ng FA

1250 mm € 778.- 31.3 kg

2050 mm € 1,203.- 51.3 kg

2550 mm € 1,469.- 63.8 kg

3050 mm € 1,735.- 76.3 kg

4050 mm € 2,266.- 101.3 kg

Sect

ioni

ng FA

1250 mm € 846.- 30.5 kg

2050 mm € 1,309.- 50.0 kg

2550 mm € 1,599.- 62.2 kg

3050 mm € 1,889.- 74.4 kg

4050 mm € 2,468.- 98.8 kg

Sect

ioni

ng FB

1250 mm € 646.- 31.3 kg

2050 mm € 997.- 51.3 kg

2550 mm € 1,221.- 63.8 kg

3050 mm € 1,446.- 76.3 kg

4050 mm € 1,893.- 101.3 kg

Sect

ioni

ng FB

1250 mm € 703.- 30.5 kg

2050 mm € 1,085.- 50.0 kg

2550 mm € 1,330.- 62.2 kg

3050 mm € 1,574.- 74.4 kg

4050 mm € 2,063.- 98.8 kg





500 mm € 238.- 12.5 kg



500 mm € 258.- 12.2 kg



NEW

NEW

NEW

Sect

ioni

ng FA

1250 mm € 857.- 35.0 kg

2050 mm € 1,325.- 57.4 kg

2550 mm € 1,619.- 71.4 kg

3050 mm € 1,912.- 85.4 kg

4050 mm € 2,498.- 113.4 kg

Sect

ioni

ng FB

1250 mm € 711.- 35.0 kg

2050 mm € 1,099.- 57.4 kg

2550 mm € 1,346.- 71.4 kg

3050 mm € 1,593.- 85.4 kg

4050 mm € 2,089.- 113.4 kg



500 mm € 261.- 14.0 kg




Dies 80°, H=100 mm

Sect

ioni

ng FA

1250 mm € 1,377.- 65.0 kg

2050 mm € 2,132.- 107.0 kg

2550 mm € 2,604.- 133.0 kg

3050 mm € 3,076.- 159.0 kg

4050 mm € 4,018.- 210.0 kg

Sect

ioni

ng FA

1250 mm € 1,525.- 71.3 kg

2050 mm € 2,361.- 117.0 kg

2550 mm € 2,883.- 145.0 kg

3050 mm € 3,404.- 174.0 kg

4050 mm € 4,448.- 231.0 kg

Sect

ioni

ng FB

1250 mm € 1,144.- 65.0 kg

2050 mm € 1,765.- 107.0 kg

2550 mm € 2,164.- 133.0 kg

3050 mm € 2,563.- 159.0 kg

4050 mm € 3,359.- 210.0 kg

Sect

ioni

ng FB

1250 mm € 1,267.- 71.3 kg

2050 mm € 1,955.- 117.0 kg

2550 mm € 2,397.- 145.0 kg

3050 mm € 2,836.- 174.0 kg

4050 mm € 3,718.- 231.0 kg

500 mm € 419.- 26.0 kg



500 mm € 465.- 28.5 kg







Sect

ioni

ng FA

1250 mm € 1,968.- 113.0 kg

2050 mm € 3,045.- 185.0 kg

2550 mm € 3,718.- 230.0 kg

3050 mm € 4,393.- 275.0 kg

4050 mm € 5,740.- 365.0 kg

Sect

ioni

ng FA

1250 mm € 1,869.- 168.0 kg

2050 mm € 2,893.- 176.0 kg

2550 mm € 3,533.- 219.0 kg

3050 mm € 4,173.- 262.0 kg

4050 mm € 5,454.- 348.0 kg

Sect

ioni

ng FB

1250 mm € 1,634.- 113.0 kg

2050 mm € 2,523.- 185.0 kg

2550 mm € 3,091.- 230.0 kg

3050 mm € 3,660.- 275.0 kg

4050 mm € 4,798.- 365.0 kg

Sect

ioni

ng FB

1250 mm € 1,554.- 168.0 kg

2050 mm € 2,397.- 176.0 kg

2550 mm € 2,938.- 219.0 kg

3050 mm € 3,478.- 262.0 kg

4050 mm € 4,559.- 348.0 kg





500 mm € 570.- 43.0 kg



500 mm € 599.- 45.0 kg



Sect

ioni

ng FA

1250 mm € 1,672.- 82.5 kg

2050 mm € 2,589.- 135.0 kg

2550 mm € 3,161.- 168.0 kg

3050 mm € 3,734.- 201.0 kg

4050 mm € 4,878.- 267.0 kg

Sect

ioni

ng FB

1250 mm € 1,390.- 82.5 kg

2050 mm € 2,144.- 135.0 kg

2550 mm € 2,628.- 168.0 kg

3050 mm € 3,111.- 201.0 kg

4050 mm € 4,079.- 267.0 kg



500 mm € 510.- 33.0 kg



www.sm-tech.ro

106 107

R2 R2

4R2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

TMR120.120.60 1600 kN/m max.

120

120

20

13145

60°

R 8,0

R 5,0

TMR100.06.30TMR100.04.306

100

20

1320

30°

R 0,6


4

100

20

13

15

20

30°

R 0,6

TMR100.10.30WMR100.08.30

WMR100.06.30 TMR100.08.30

6

100

1325

16

30°

R 2,0

8

100

1325

16

30°

R 2,5

8

100

20

1320

30°

R 1,0

10

100

20

1320

30°

R 1,0



42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

WMR100.10.30 400 kN/m max.

10

100

1325

20

30°

R 2,5

TMR100.12.3012

100

20

1325

30°

R 1,0

400 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Sect

ioni

ng FA

1250 mm € 2,433.- 113.8 kg

2050 mm € 3,260.- 186.6 kg

2550 mm € 4,870.- 232.1 kg

3050 mm € 5,507.- 277.6 kg

4050 mm € 7,300.- 368.6 kg

Sect

ioni

ng FB

1250 mm € 2,334.- 113.8 kg

2050 mm € 3,438.- 186.6 kg

2550 mm € 4,230.- 232.1 kg

3050 mm € 5,020.- 277.6 kg

4050 mm € 6,608.- 368.6 kg



Dies 60°, H=120 mm


Rolleri Videos

500 mm € 772.- 45.5 kg



Dies 30°, H=100 mm

Dies 30°, H=100 mm

NEW NEW

NEW

NEWNEW

Sect

ioni

ng FA

1250 mm € 823.- 17.5 kg

2050 mm € 1,274.- 28.7 kg

2550 mm € 1,556.- 35.7 kg

3050 mm € 1,838.- 42.7 kg

4050 mm € 2,400.- 56.7 kg

Sect

ioni

ng FA

1250 mm € 656.- 21.8 kg

2050 mm € 1,016.- 34.9 kg

2550 mm € 1,241.- 43.4 kg

3050 mm € 1,465.- 51.9 kg

4050 mm € 1,913.- 68.9 kg

Sect

ioni

ng FB

1250 mm € 684.- 17.5 kg

2050 mm € 1,057.- 28.7 kg

2550 mm € 1,293.- 35.7 kg

3050 mm € 1,532.- 42.7 kg

4050 mm € 2,008.- 56.7 kg

Sect

ioni

ng FB

1250 mm € 545.- 21.8 kg

2050 mm € 843.- 34.9 kg

2550 mm € 1,031.- 43.4 kg

3050 mm € 1,221.- 51.9 kg

4050 mm € 1,600.- 68.9 kg





500 mm € 200.- 8.7 kg



500 mm € 251.- 7.0 kg



Sect

ioni

ng FA

1250 mm € 656.- 21.3 kg

2050 mm € 1,016.- 34.9 kg

2550 mm € 1,241.- 43.4 kg

3050 mm € 1,465.- 51.9 kg

4050 mm € 1,913.- 68.9 kg

Sect

ioni

ng FA

1250 mm € 708.- 17.5 kg

2050 mm € 1,096.- 28.7 kg

2550 mm € 1,338.- 35.7 kg

3050 mm € 1,580.- 42.7 kg

4050 mm € 2,065.- 56.7 kg

Sect

ioni

ng FB

1250 mm € 545.- 21.3 kg

2050 mm € 843.- 34.9 kg

2550 mm € 1,031.- 43.4 kg

3050 mm € 1,221.- 51.9 kg

4050 mm € 1,600.- 68.9 kg

Sect

ioni

ng FB

1250 mm € 588.- 17.5 kg

2050 mm € 908.- 28.7 kg

2550 mm € 1,113.- 35.7 kg

3050 mm € 1,317.- 42.7 kg

4050 mm € 1,726.- 56.7 kg





Sect

ioni

ng FA

1250 mm € 778.- 26.3 kg

2050 mm € 1,203.- 43.1 kg

2550 mm € 1,469.- 53.6 kg

3050 mm € 1,735.- 64.1 kg

4050 mm € 2,266.- 85.1 kg

Sect

ioni

ng FB

1250 mm € 646.- 26.3 kg

2050 mm € 997.- 43.1 kg

2550 mm € 1,221.- 53.6 kg

3050 mm € 1,446.- 64.1 kg

4050 mm € 1,893.- 85.1 kg



515 mm € 236.- 9.0 kg


515 mm € 218.- 7.7 kg


515 mm € 218.- 7.7 kg


500 mm € 200.- 8.5 kg



500 mm € 217.- 8.5 kg



500 mm € 238.- 10.3 kg



www.sm-tech.ro

108 109

R2 R2

4R2

WMR100.12.30 400 kN/m max.

12

100

1325

20

30°

R 3,0

TMR100.16.3016

100

20

1330

30°

R 1,6

500 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

TMR100.24.30

TMR100.40.30TMR100.30.30

24

100

20

1340

30°

R 2,5

30

100

20

1355

30°

R 3,0

650 kN/m max.


TMR100.20.3020

100

20

1335

30°

R 2,0

600 kN/m max.

40

100

20

1360

30°

R 5,0

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

TMR150.06.86

TMR150.10.86

TMR150.16.86

TMR150.08.86

TMR150.12.86

TMR150.20.86

400 kN/m max.

500 kN/m max.

700 kN/m max.

400 kN/m max.

500 kN/m max.

700 kN/m max.

6

150

2013

20

86°

R 0,6

30

8

150

20

13

20

86°

R 0,8

30

10

150

20

13

20

86°

R 1,0

30

12

150

20

13

25

86°

R 1,0

16

150

20

13

30

86°

R 1,6 20

150

20

13

30

86°

R 2,0

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies 30°, H=100 mm

Sect

ioni

ng FA

1250 mm € 821.- 29.5 kg

2050 mm € 1,273.- 48.4 kg

2550 mm € 1,554.- 60.2 kg

3050 mm € 1,835.- 72.0 kg

4050 mm € 2,397.- 95.6 kg

Sect

ioni

ng FB

1250 mm € 683.- 29.5 kg

2050 mm € 1,054.- 48.4 kg

2550 mm € 1,291.- 60.2 kg

3050 mm € 1,530.- 72.0 kg

4050 mm € 2,004.- 95.6 kg



Sect

ioni

ng FA

1250 mm € 898.- 32.5 kg

2050 mm € 1,390.- 53.3 kg

2550 mm € 1,697.- 66.3 kg

3050 mm € 2,004.- 79.3 kg

4050 mm € 2,618.- 105.0 kg

Sect

ioni

ng FA

1250 mm € 932.- 37.5 kg

2050 mm € 1,443.- 61.5 kg

2550 mm € 1,762.- 76.5 kg

3050 mm € 2,082.- 91.5 kg

4050 mm € 2,719.- 122.0 kg

Sect

ioni

ng FB

1250 mm € 746.- 32.5 kg

2050 mm € 1,151.- 53.3 kg

2550 mm € 1,412.- 66.3 kg

3050 mm € 1,670.- 79.3 kg

4050 mm € 2,189.- 105.0 kg

Sect

ioni

ng FB

1250 mm € 774.- 37.5 kg

2050 mm € 1,196.- 61.5 kg

2550 mm € 1,465.- 76.5 kg

3050 mm € 1,735.- 91.5 kg

4050 mm € 2,274.- 122.0 kg





515 mm € 260.- 8.9 kg


500 mm € 251.- 11.8 kg



500 mm € 284.- 15.0 kg



500 mm € 274.- 13.0 kg



NEW

NEW

Sect

ioni

ng FA

1250 mm € 1,424.- 46.3 kg

2050 mm € 2,205.- 75.9 kg

2550 mm € 2,692.- 94.4 kg

3050 mm € 3,180.- 112.9 kg

4050 mm € 4,154.- 149.9 kg

Sect

ioni

ng FA

1250 mm € 1,040.- 47.5 kg

2050 mm € 1,764.- 80.0 kg

2550 mm € 2,154.- 96.9 kg

3050 mm € 2,544.- 116.0 kg

4050 mm € 3,323.- 154.0 kg

Sect

ioni

ng FB

1250 mm € 1,182.- 46.3 kg

2050 mm € 1,826.- 75.9 kg

2550 mm € 2,238.- 94.4 kg

3050 mm € 2,649.- 112.9 kg

4050 mm € 3,473.- 149.9 kg

Sect

ioni

ng FB

1250 mm € 945.- 47.5 kg

2050 mm € 1,461.- 80.0 kg

2550 mm € 1,790.- 96.9 kg

3050 mm € 2,119.- 116.0 kg

4050 mm € 2,779.- 154.0 kg





500 mm € 434.- 18.5 kg



500 mm € 347.- 19.0 kg



Dies 86°, H=150 mm

Sect

ioni

ng FA

1250 mm € 674.- 32.5 kg

2050 mm € 1,043.- 53.3 kg

2550 mm € 1,273.- 66.3 kg

3050 mm € 1,504.- 79.3 kg

4050 mm € 1,966.- 105.3 kg

Sect

ioni

ng FB

1250 mm € 560.- 32.5 kg

2050 mm € 864.- 53.3 kg

2550 mm € 1,059.- 66.3 kg

3050 mm € 1,254.- 79.3 kg

4050 mm € 1,643.- 105.3 kg









Sect

ioni

ng FA

1250 mm € 699.- 32.8 kg

2050 mm € 1,082.- 53.7 kg

2550 mm € 1,321.- 66.8 kg

3050 mm € 1,561.- 79.9 kg

4050 mm € 2,040.- 106.1 kg

Sect

ioni

ng FB

1250 mm € 581.- 32.8 kg

2050 mm € 897.- 53.7 kg

2550 mm € 1,099.- 66.8 kg

3050 mm € 1,301.- 79.9 kg

4050 mm € 1,705.- 106.1 kg

Sect

ioni

ng FA

1250 mm € 719.- 32.5 kg

2050 mm € 1,113.- 53.3 kg

2550 mm € 1,359.- 66.3 kg

3050 mm € 1,605.- 79.3 kg

4050 mm € 2,097.- 105.3 kg

Sect

ioni

ng FB

1250 mm € 598.- 32.5 kg

2050 mm € 922.- 53.3 kg

2550 mm € 1,130.- 66.3 kg

3050 mm € 1,338.- 79.3 kg

4050 mm € 1,754.- 105.3 kg

Sect

ioni

ng FA

1250 mm € 757.- 38.8 kg

2050 mm € 1,171.- 63.6 kg

2550 mm € 1,430.- 79.1 kg

3050 mm € 1,690.- 94.6 kg

4050 mm € 2,208.- 125.6 kg

Sect

ioni

ng FB

1250 mm € 629.- 38.8 kg

2050 mm € 971.- 63.6 kg

2550 mm € 1,190.- 79.1 kg

3050 mm € 1,408.- 94.6 kg

4050 mm € 1,846.- 125.6 kg

500 mm € 231.- 15.5 kg



500 mm € 219.- 13.0 kg



500 mm € 206.- 13.0 kg



500 mm € 213.- 13.1 kg





Sect

ioni

ng FA

1250 mm € 846.- 45.0 kg

2050 mm € 1,308.- 73.8 kg

2550 mm € 1,598.- 91.8 kg

3050 mm € 1,887.- 109.8 kg

4050 mm € 2,466.- 145.8 kg

Sect

ioni

ng FB

1250 mm € 703.- 45.0 kg

2050 mm € 1,084.- 73.8 kg

2550 mm € 1,329.- 91.8 kg

3050 mm € 1,573.- 109.8 kg

4050 mm € 2,062.- 145.8 kg



Sect

ioni

ng FA

1250 mm € 909.- 45.5 kg

2050 mm € 1,406.- 74.6 kg

2550 mm € 1,717.- 92.8 kg

3050 mm € 2,028.- 111.0 kg

4050 mm € 2,651.- 147.4 kg

Sect

ioni

ng FB

1250 mm € 755.- 45.5 kg

2050 mm € 1,165.- 74.6 kg

2550 mm € 1,428.- 92.8 kg

3050 mm € 1,690.- 111.0 kg

4050 mm € 2,216.- 147.4 kg

500 mm € 258.- 18.0 kg



500 mm € 277.- 18.2 kg



NEW

NEW

NEW

NEW

NEW NEW

www.sm-tech.ro

110 111

R2 R2

4R2

TMR150.24.86 700 kN/m max.

24

150

20

13

35

86°

R 2,5

TMR150.06.84 TMR150.08.84400 kN/m max. 400 kN/m max.

6

150

20

13

20

84°

R 0,6

30

8

150

20

13

30

20

84°

R 0,8

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

TMR150.10.84

TMR150.16.84

TMR150.24.84

TMR150.12.84

TMR150.20.84

500 kN/m max.

700 kN/m max.

700 kN/m max.

500 kN/m max.

700 kN/m max.

30

10

150

20

13

20

84°

R 1,0 12

150

20

13

25

84°

R 1,0

16

150

20

13

30

84°

R 1,6 20

150

20

13

30

84°

R 2,0

24

150

20

13

35

84°

R 2,5

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2






Dies 86°, H=150 mm



Sect

ioni

ng FA

1250 mm € 1,004.- 52.0 kg

2050 mm € 1,554.- 85.3 kg

2550 mm € 1,898.- 106.0 kg

3050 mm € 2,242.- 129.9 kg

4050 mm € 2,930.- 168.5 kgSe

ctio

ning

FB1250 mm € 835.- 52.0 kg

2050 mm € 1,288.- 85.3 kg

2550 mm € 1,579.- 106.0 kg

3050 mm € 1,868.- 129.9 kg

4050 mm € 2,450.- 168.5 kg


Rolleri Videos

500 mm € 306.- 20.8 kg



NEW

Sect

ioni

ng FA

1250 mm € 674.- 32.5 kg

2050 mm € 1,043.- 53.3 kg

2550 mm € 1,273.- 66.3 kg

3050 mm € 1,504.- 79.3 kg

4050 mm € 1,966.- 105.3 kg

Sect

ioni

ng FA

1250 mm € 699.- 32.5 kg

2050 mm € 1,082.- 53.3 kg

2550 mm € 1,321.- 66.3 kg

3050 mm € 1,561.- 79.3 kg

4050 mm € 2,040.- 105.3 kg

Sect

ioni

ng FB

1250 mm € 560.- 32.5 kg

2050 mm € 864.- 53.3 kg

2550 mm € 1,059.- 66.3 kg

3050 mm € 1,254.- 79.3 kg

4050 mm € 1,643.- 105.3 kg

Sect

ioni

ng FB

1250 mm € 581.- 32.5 kg

2050 mm € 897.- 53.3 kg

2550 mm € 1,099.- 66.3 kg

3050 mm € 1,301.- 79.3 kg

4050 mm € 1,705.- 105.3 kg





500 mm € 206.- 13.0 kg



500 mm € 213.- 13.0 kg



Dies 84°, H=150 mm

NEW NEW

Dies 84°, H=150 mm

NEW

NEW

NEW

NEW

NEW





Sect

ioni

ng FA

1250 mm € 719.- 32.5 kg

2050 mm € 1,113.- 53.3 kg

2550 mm € 1,359.- 66.3 kg

3050 mm € 1,605.- 79.3 kg

4050 mm € 2,097.- 105.3 kg

Sect

ioni

ng FA

1250 mm € 757.- 38.8 kg

2050 mm € 1,171.- 63.6 kg

2550 mm € 1,430.- 79.1 kg

3050 mm € 1,690.- 94.6 kg

4050 mm € 2,208.- 125.6 kg

Sect

ioni

ng FB

1250 mm € 598.- 32.5 kg

2050 mm € 922.- 53.3 kg

2550 mm € 1,130.- 66.3 kg

3050 mm € 1,338.- 79.3 kg

4050 mm € 1,754.- 105.3 kg

Sect

ioni

ng FB

1250 mm € 629.- 38.8 kg

2050 mm € 971.- 63.6 kg

2550 mm € 1,190.- 79.1 kg

3050 mm € 1,408.- 94.6 kg

4050 mm € 1,846.- 125.6 kg

500 mm € 219.- 13.0 kg



500 mm € 231.- 15.5 kg







Sect

ioni

ng FA

1250 mm € 846.- 45.0 kg

2050 mm € 1,308.- 73.8 kg

2550 mm € 1,598.- 91.8 kg

3050 mm € 1,887.- 109.8 kg

4050 mm € 2,466.- 145.8 kg

Sect

ioni

ng FA

1250 mm € 909.- 45.5 kg

2050 mm € 1,406.- 74.6 kg

2550 mm € 1,717.- 92.8 kg

3050 mm € 2,028.- 111.0 kg

4050 mm € 2,651.- 147.4 kg

Sect

ioni

ng FB

1250 mm € 703.- 45.0 kg

2050 mm € 1,084.- 73.8 kg

2550 mm € 1,329.- 91.8 kg

3050 mm € 1,573.- 109.8 kg

4050 mm € 2,062.- 145.8 kg

Sect

ioni

ng FB

1250 mm € 755.- 45.5 kg

2050 mm € 1,165.- 74.6 kg

2550 mm € 1,428.- 92.8 kg

3050 mm € 1,690.- 111.0 kg

4050 mm € 2,216.- 147.4 kg

500 mm € 258.- 18.0 kg



500 mm € 277.- 18.2 kg





Sect

ioni

ng FA

1250 mm € 1,004.- 52.0 kg

2050 mm € 1,554.- 85.3 kg

2550 mm € 1,898.- 106.0 kg

3050 mm € 2,242.- 129.9 kg

4050 mm € 2,930.- 168.5 kg

Sect

ioni

ng FB

1250 mm € 835.- 52.0 kg

2050 mm € 1,288.- 85.3 kg

2550 mm € 1,579.- 106.0 kg

3050 mm € 1,868.- 129.9 kg

4050 mm € 2,450.- 168.5 kg

500 mm € 306.- 20.8 kg



www.sm-tech.ro

112 113

R2 R2

4R2

TMR150.24.80 TMR150.30.80

TMR150.40.80 TMR150.50.801200 kN/m max.

700 kN/m max.

1500 kN/m max.

900 kN/m max.

24

150

20

13

35

80°

R 2,5 30

150

20

13

45

80°

R 5,0

40

150

20

13

55

80°

R 5,0 50

150

20

13

65

80°

R 5,0

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

TMR150.06.30

TMR150.10.30 TMR150.12.30

TMR150.08.30400 kN/m max.

400 kN/m max.

400 kN/m max.

400 kN/m max.

TMR150.16.30 500 kN/m max. TMR150.20.30 600 kN/m max.

6

150

20

13

20

30°

R 0,6

30

8

150

20

13

20

30°

R 1,0

30

10

150

20

13

20

30°

R 1,0

30

12

150

20

13

25

30°

R 1,0

16

150

20

13

30

30°

R 1,6 20

150

20

13

35

30°

R 2,0

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2






Dies 80°, H=150 mm

Sect

ioni

ng FA

1250 mm € 1,004.- 52.0 kg

2050 mm € 1,554.- 85.3 kg

2550 mm € 1,898.- 106.0 kg

3050 mm € 2,242.- 129.9 kg

4050 mm € 2,930.- 168.5 kgSe

ctio

ning

FA

1250 mm € 1,301.- 77.5 kg

2050 mm € 2,013.- 127.1 kg

2550 mm € 2,458.- 158.1 kg

3050 mm € 2,903.- 189.1 kg

4050 mm € 3,794.- 251.1 kg

Sect

ioni

ng FA

1250 mm € 1,727.- 90.0 kg

2050 mm € 2,672.- 147.6 kg

2550 mm € 3,563.- 183.6 kg

3050 mm € 3,854.- 219.6 kg

4050 mm € 5,038.- 291.6 kg

Sect

ioni

ng FB

1250 mm € 835.- 52.0 kg

2050 mm € 1,288.- 85.3 kg

2550 mm € 1,579.- 106.0 kg

3050 mm € 1,868.- 129.9 kg

4050 mm € 2,450.- 168.5 kg

Sect

ioni

ng FB

1250 mm € 1,081.- 77.5 kg

2050 mm € 1,668.- 127.1 kg

2550 mm € 2,044.- 158.1 kg

3050 mm € 2,419.- 189.1 kg

4050 mm € 3,172.- 251.1 kg

Sect

ioni

ng FB

1250 mm € 1,435.- 90.0 kg

2050 mm € 2,214.- 147.6 kg

2550 mm € 2,714.- 183.6 kg

3050 mm € 3,212.- 219.6 kg

4050 mm € 4,211.- 291.6 kg

Sect

ioni

ng FA

1250 mm € 1,019.- 65.0 kg

2050 mm € 1,577.- 106.6 kg

2550 mm € 1,925.- 132.6 kg

3050 mm € 2,274.- 158.6 kg

4050 mm € 2,972.- 210.6 kg

Sect

ioni

ng FB

1250 mm € 847.- 65.0 kg

2050 mm € 1,307.- 106.6 kg

2550 mm € 1,601.- 132.6 kg

3050 mm € 1,895.- 158.6 kg

4050 mm € 2,485.- 210.6 kg

500 mm € 306.- 20.8 kg



500 mm € 396.- 31.0 kg



500 mm € 311.- 26.0 kg



500 mm € 526.- 36.0 kg











NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

Dies 30°, H=150 mm

Sect

ioni

ng FA

1250 mm € 741.- 32.0 kg

2050 mm € 1,146.- 52.5 kg

2550 mm € 1,400.- 65.3 kg

3050 mm € 1,653.- 78.1 kg

4050 mm € 2,161.- 103.7 kg

Sect

ioni

ng FA

1250 mm € 741.- 31.8 kg

2050 mm € 1,146.- 52.1 kg

2550 mm € 1,400.- 64.8 kg

3050 mm € 1,653.- 77.5 kg

4050 mm € 2,161.- 102.9 kg

Sect

ioni

ng FB

1250 mm € 616.- 32.0 kg

2050 mm € 950.- 52.5 kg

2550 mm € 1,164.- 65.3 kg

3050 mm € 1,378.- 78.1 kg

4050 mm € 1,806.- 103.7 kg

Sect

ioni

ng FB

1250 mm € 616.- 31.8 kg

2050 mm € 950.- 52.1 kg

2550 mm € 1,164.- 64.8 kg

3050 mm € 1,378.- 77.5 kg

4050 mm € 1,806.- 102.9 kg





500 mm € 226.- 12.8 kg



500 mm € 226.- 12.7 kg



Sect

ioni

ng FA

1250 mm € 800.- 31.5 kg

2050 mm € 1,239.- 51.7 kg

2550 mm € 1,512.- 64.3 kg

3050 mm € 1,786.- 76.9 kg

4050 mm € 2,335.- 102.1 kg

Sect

ioni

ng FA

1250 mm € 837.- 38.0 kg

2050 mm € 1,294.- 62.3 kg

2550 mm € 1,581.- 77.5 kg

3050 mm € 1,867.- 92.7 kg

4050 mm € 2,440.- 123.1 kg

Sect

ioni

ng FB

1250 mm € 665.- 31.5 kg

2050 mm € 1,026.- 51.7 kg

2550 mm € 1,258.- 64.3 kg

3050 mm € 1,489.- 76.9 kg

4050 mm € 1,952.- 102.1 kg

Sect

ioni

ng FB

1250 mm € 695.- 38.0 kg

2050 mm € 1,073.- 62.3 kg

2550 mm € 1,315.- 77.5 kg

3050 mm € 1,556.- 92.7 kg

4050 mm € 2,040.- 123.1 kg





500 mm € 244.- 12.6 kg



500 mm € 255.- 15.2 kg



Sect

ioni

ng FA

1250 mm € 925.- 44.3 kg

2050 mm € 1,431.- 72.6 kg

2550 mm € 1,748.- 90.3 kg

3050 mm € 2,064.- 108.0 kg

4050 mm € 2,698.- 143.4 kg

Sect

ioni

ng FA

1250 mm € 1,017.- 50.0 kg

2050 mm € 1,574.- 82.0 kg

2550 mm € 1,922.- 102.0 kg

3050 mm € 2,270.- 122.0 kg

4050 mm € 2,967.- 162.0 kg

Sect

ioni

ng FB

1250 mm € 769- 44.3 kg

2050 mm € 1,186.- 72.6 kg

2550 mm € 1,454.- 90.3 kg

3050 mm € 1,721.- 108.0 kg

4050 mm € 2,256.- 143.4 kg

Sect

ioni

ng FB

1250 mm € 845- 50.0 kg

2050 mm € 1,304.- 82.0 kg

2550 mm € 1,598.- 102.0 kg

3050 mm € 1,892.- 122.0 kg

4050 mm € 2,480.- 162.0 kg





500 mm € 282.- 17.7 kg



500 mm € 310.- 20.0 kg



www.sm-tech.ro

114 115

R2 R2

4R2

TMR150.24.30

TMR150.40.30

TMR150.30.30650 kN/m max.

900 kN/m max.

900 kN/m max.

24

150

20

13

40

30°

R 2,5 30

150

20

13

55

30°

R 3,0

40

150

20

13

60

30°

R 5,0

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

AD5 AD6

60

13,1

60

20,5

60

13,1

30 20,5

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

AD7

6013

4020

AD8-12.7 1000 kN/m max.

4813,1

30

12,77

20,5






Dies 30°, H=150 mm

Please ask for delivery times. It is usually faster than you think!







Sect

ioni

ng FA

1250 mm € 1,046.- 61.5 kg

2050 mm € 1,619.- 100.9 kg

2550 mm € 1,976.- 125.5 kg

3050 mm € 2,335.- 150.1 kg

4050 mm € 3,051.- 199.3 kg

Sect

ioni

ng FA

1250 mm € 1,582.- 61.5 kg

2050 mm € 2,449.- 100.9 kg

2550 mm € 2,990.- 125.5 kg

3050 mm € 3,532.- 150.1 kg

4050 mm € 4,616.- 199.3 kgSe

ctio

ning

FA

1250 mm € 1,936.- 63.3 kg

2050 mm € 2,996.- 103.7 kg

2550 mm € 3,659.- 129.0 kg

3050 mm € 4,322.- 154.3 kg

4050 mm € 5,649.- 204.9 kg

Sect

ioni

ng FB

1250 mm € 869.- 61.5 kg

2050 mm € 1,341.- 100.9 kg

2550 mm € 1,644.- 125.5 kg

3050 mm € 1,946.- 150.1 kg

4050 mm € 2,551.- 199.3 kg

Sect

ioni

ng FB

1250 mm € 1,315.- 61.5 kg

2050 mm € 2,029.- 100.9 kg

2550 mm € 2,487.- 125.5 kg

3050 mm € 2,943.- 150.1 kg

4050 mm € 3,859.- 199.3 kg

Sect

ioni

ng FB

1250 mm € 1,609.- 63.3 kg

2050 mm € 2,483.- 103.7 kg

2550 mm € 3,043.- 129.0 kg

3050 mm € 3,602.- 154.3 kg

4050 mm € 4,722.- 204.9 kg

NEW

NEW NEW500 mm € 319.- 24.6 kg



500 mm € 590.- 25.3 kg



500 mm € 482.- 24.6 kg



Die adapters




Rolleri Type RX LVD Rolleri Type R2/R3

1000 mm € 226.- 26.1 kg

500 mm € 125.- 13.0 kg

1000 mm € 201.- 12.0 kg

500 mm € 104.- 6.0 kg

835 mm € 254.- 18.0 kg

415 mm € 149.- 9.0 kg

1000 mm € 366.- 15.0 kg

500 mm € 212.- 7.5 kg

www.sm-tech.ro

116

R2

TMN95.20 1000 kN/m max. 200 kN/m max.

C45: 560-710 N/mm2

20

95

35

60

20

19

13

INS20...

2035

α

V5

24

α

4R2

ROLLERI TYPE R2


Synthetic dies, H=100 mm

• easy handling • faster and easier exchange • preventing bending marks• decrease of post-processing of bended profi les • higher product quality

Synthetic dies will be adjusted into the housing and secured with bolted screws.

Mounting example

housing

synthetic die

bolted screws

More mark-free bending available see pages 222-229




835 mm € 360.- 12.0 kg

415 mm € 200.- 6.0 kg

835 mm € 145.- 0.40 kg

415 mm € 83.- 0.20 kg

www.sm-tech.ro

118 119

R2 R2

4R2

TPR.SM.195.28.8 / TPR.SM.195.24.8 TPR.SM.195.24.10

TPR.SM.195.24.1280

59

R 1

10

60

20

13

8020

59

R 1

12

60

13

80

59

R 1

8

60

20

13

A

2XS

S S


42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

TML100

TMS100

TMI100

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

1200 kN/m max.

1300 kN/m max.

1300 kN/m max.

100

15

TML100

TMS100

TMI100

TMI100

100

15

29

100

34,5

14,7






Hemming Dies


Hemming punches see page 91





S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

Hemming Dies

• movable table necessary• used fl exibly• easy mounting

Sect

ioni

ng FA

1250 mm € 394.- 12.5 kg

2050 mm € 610.- 20.5 kg

2550 mm € 746.- 25.5 kg

3050 mm € 880.- 30.5 kg

4050 mm € 1,150.- 40.5 kg

Sect

ioni

ng FA

1250 mm € 822.- 12.5 kg

2050 mm € 1,272.- 20.5 kg

2550 mm € 1,554.- 25.5 kg

3050 mm € 1,836.- 30.5 kg

4050 mm € 2,398.- 40.5 kg

Sect

ioni

ng FB

1250 mm € 327.- 12.5 kg

2050 mm € 509.- 20.5 kg

2550 mm € 620.- 25.5 kg

3050 mm € 734.- 30.5 kg

4050 mm € 962.- 40.5 kg

Sect

ioni

ng FB

1250 mm € 683.- 12.5 kg

2050 mm € 1,055.- 20.5 kg

2550 mm € 1,292.- 25.5 kg

3050 mm € 1,529.- 30.5 kg

4050 mm € 2,006.- 40.5 kg





500 mm € 121.- 5.0 kg



500 mm € 251.- 5.0 kg



Example of application TMI100 + TML100

Example of application TMI100 + TMS100

Die with bolt

Hemming Punch

Die with bolt

Hemming Punch


Sect

ioni

ng FA

1250 mm € 1,008.- 12.5 kg

2050 mm € 1,559.- 20.5 kg

2550 mm € 1,904.- 25.5 kg

3050 mm € 2,249.- 30.5 kg

4050 mm € 2,937.- 40.5 kg

Sect

ioni

ng FB

1250 mm € 837.- 12.5 kg

2050 mm € 1,292.- 20.5 kg

2550 mm € 1,583.- 25.5 kg

3050 mm € 1,874.- 30.5 kg

4050 mm € 2,456.- 40.5 kg



500 mm € 307.- 5.0 kg



Application

www.sm-tech.ro

5R3

PUNCHES ROLLERI TYPE R3Content Explanation 122 - 123

Punches Bystronic-Beyeler RFA 124 - 125

Punches Bystronic-Beyeler RF 125

Hemming Punches Bystronic-Beyeler RFA 126

Punches Bystronic-Beyeler R 127

Punches Bystronic-Beyeler S 128

Punch adapters 129

Z-Pro� le Tools 130 - 131

Radius Tools 132 - 133

Punches Rolleri Type R3 are compatible with press brake machines from:- Bystronic-Beyeler RFA- Bystronic-Beyeler RF- Bystronic-Beyeler R- Bystronic-Beyeler S


Compatibility

www.sm-tech.ro

122 123

R3 R3

5R3

Bystronic-Beyeler RFA Bystronic-Beyeler RF Bystronic-Beyeler R Bystronic-Beyeler S

25

1530°

35

15

120°

45

H

20

11

1414

R

α

H

28,5

0

20

11

R

α

H

28

1414

20

11

R

α

45

H22

20

R

α

1 2

BR

H

1100

100

100

300

200100 75 60 50 40 30 20 15

10

375

30050 30 20 15

10

1100

200

100

495

170100 50 45 40 35 30 25

1000 mm

500 mm

508 mm

525 mm







Punches Rolleri Type R3 have the following tangs:

Punches Rolleri Type R3 are:

• compatible with press brake machines from:- Bystronic-Beyeler RFA- Bystronic-Beyeler RF- Bystronic-Beyeler R- Bystronic-Beyeler S



Tang


Tool lengths and sectioningStandard



1100 mm segmented BP (13 segments)

1100 mm segmented BPR (9 segments)


Horn Types

Horn 1Standard BPfor all segm. Punches BP Rolleri Type R3

Horn 2Standard BPRfor all segm. Punches BPRRolleri Type R3

Individual Hornproduction according to your speci� cations


HORN HORN

press force line

press force line

press force line

press force line

Horn

Horn

Horn

Horn







Material

www.sm-tech.ro

124 125

R3 R3

5R3

40

20

0

20

40

60

80

100

120

60

80

100

120

0

250

28,5

0

26°R 1,0

40

20

0

20

40

60

80

100

120

60

80

100

120

0

250

28,5

0

85°R 1,5

BPR250.P4-RFA

BP175.88.R1-A-RFA BPR250.P4-RFBP175.88.R1-B-RFA

BP175.88.R15-RFA BP175.30.R1-RFA

BPR250.P5-RF

900 kN/m max.


1000 kN/m max.

1000 kN/m max.


900 kN/m max.

40

20

0

20

40

60

80

100

120

60

80

100

120

0

250

85°R 1,5

2820

1414

40

20

0

20

40

60

80

100

120

60

80

100

120

0

250

26°R 1,0

28

1414

20

40

20

0

20

40

60

60

80

0

175

88°R 1,0

1414

20

12

40

20

0

20

40

60

60

80

0

175

88°R 1,0

1414

20

10

40

20

0

20

40

60

60

80

0

175

88°R 1,5

1414

20

40

20

0

20

40

60

60

80

0

175

30°R 1,0

1414

20

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

2 2

2 21 1

11






BPR250.P5-RFA

Punches Bystronic-Beyeler RFA

508 mm € 840.- 27.4 kg1100 mmsegmented € 2,510.- 59.0 kg


1000 mm € 697.- 23.0 kg


1000 mm € 697.- 23.0 kg


Punches Bystronic-Beyeler RFA



1000 mm € 646.- 16.0 kg


1000 mm € 1,180.- 23.0 kg


Punches Bystronic-Beyeler RF

HORN HORN

HORN HORN

HORN HORN

HORNHORN

www.sm-tech.ro

126 127

R3 R3

5R3

BPR.SP-195.28.6 BP155.85.R08-R

BP155.85.R15-R

BP155.28.R1-R

BP155.85.R1-R

BP155.30.R1-R

BP155.28.R3-R

BPR.SP-195.24.10

BPR.SP-195.28.8

BPR.SP-195.24.12

500 kN/m max.

500 kN/m max.

800 kN/m max.

1000 kN/m max.

800 kN/m max.

1000 kN/m max.

40

20

0

20

40

60

80

60

80

0

130

58

26

195

24°R 0,6

10

20

40

20

0

20

40

60

80

60

80

0

130

58

26

195

24°R 0,6

12

20

40

20

0

20

40

60

80

60

80

0

130

58

26

195

28°R 0,6

6

20

40

20

0

20

40

60

80

60

80

0

130

58

26

195

28°R 0,6

8

20

40

20

0

20

40

60

80

60

80

0

45

60

155

85°R 0,8

20

1414

40

20

0

20

40

60

80

60

80

0

45

30

155

85°R 1,0

20

1414

40

20

0

20

40

60

80

60

80

0

22

155

28°R 3,0

20

1414

40

20

0

20

40

60

80

60

80

0

45

22

155

30°R 1,0

20

1414

40

20

0

20

40

60

80

60

80

0

45

60

155

85°R 1,5

20

1414

40

20

0

20

40

60

80

60

80

0

45

2215

5

28°R 1,0

20

1414 C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1

1

1

1

1 1

A

2XS

S S


500 kN/m max.






Hemming Punches Bystronic-Beyeler RFA

Compatible Hemming Dies on page 146





Example of Application

Punches Bystronic-Beyeler R

1000 mm € 489.- 23.0 kg


1000 mm € 412.- 16.0 kg


1000 mm € 950.- 30.5 kg


1000 mm € 950.- 32.0 kg


1000 mm € 420.- 16.0 kg


1000 mm € 389.- 21.0 kg


HORN

HORN

HORN

HORN

HORN HORN

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

www.sm-tech.ro

128 129

R3 R3

5R3

40

20

0

20

40

60

80

60

80

0

45

155

28°R 3,0

22

20

40

20

0

20

40

60

80

60

80

0

45

60

155

85°R 0,8

22

20

BP155.85.R08-S

BP155.85.R15-S

BP155.28.R1-S

BP155.85.R1-S

BP155.30.R1-S

BP155.28.R3-S

500 kN/m max.

500 kN/m max.

800 kN/m max.

1000 kN/m max.

800 kN/m max.

1000 kN/m max.

40

20

0

20

40

60

80

60

80

0

45

30

155

85°R 1,0

22

20

40

20

0

20

40

60

80

60

80

0

45

155

30°R 1,0

22

20

40

20

0

20

40

60

80

60

80

0

45

60

155

85°R 1,5

22

20

40

20

0

20

40

60

80

60

80

0

45

155

28°R 1,0

22

20C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

1

1

1 1

1

1

AD22 1000 kN/m max.

20

4014

4631

36

113

1414

AD3 1000 kN/m max.

AD10 1000 kN/m max.

22

4014

4631

36

113

14

6250

140

20

1414

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Punches Bystronic-Beyeler S

1000 mm € 912.- 32.0 kg


1000 mm € 912.- 32.0 kg


1000 mm € 395.- 16.0 kg


1000 mm € 364.- 23.5 kg


1000 mm € 459.- 32.0 kg


1000 mm € 395.- 17.5 kg


Punch adapters

Rolleri Type R3 Beyeler R Rolleri Type R1

Rolleri Type R3 Beyeler S Rolleri Type R1

Rolleri Type R3 Beyeler RFA Rolleri Type R1


HORN

HORN

HORN HORN

HORN

HORN

150 mm € 90.- 3.4 kg

150 mm € 90.- 3.3 kg

150 mm € 178.- 3.4 kg

www.sm-tech.ro

130 131

R3 R3

5R3

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

BPZ-RFA BPZ-R

BPZ-S


1000 kN/m max.

4613

180

65

2073

4613

125

45

2073

4613

125

45

2073

C45: 560-710 N/mm2

1000 kN/m max.

1000 kN/m max.

23

4525

Z

Sα

23

37

Z

Sα

Z

Sα

C45: 560-710 N/mm2








Z-Pro� le Tools

NEW

NEW


Rolleri Videos

Z-Pro� le Tools

Z-Pro� le Inserts 160° / 150° / 140° / 90°Model Z

(mm) α S* (mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 1.0 1.0 160° 1.2 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5 1.5 160° 1.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0 2.0 150° 1.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5 2.5 140° 1.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.0/90 1.0 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 1.5/90 1.5 90° 0.3 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.0/90 2.0 90° 0.4 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 2.5/90 2.5 90° 0.5 € 350.- 11.0 kg € 214.- 5.5 kg

CEZ 3.0 3.0 90° 1.0 € 350.- 10.3 kg € 214.- 5.1 kg

CEZ 3.5 3.5 90° 1.0 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.0 4.0 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 4.5 4.5 90° 1.2 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.0 5.0 90° 1.3 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 5.5 5.5 90° 1.4 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.0 6.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 6.5 6.5 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.0 7.0 90° 1.5 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 7.5 7.5 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg

CEZ 8.0 8.0 90° 1.6 € 350.- 10.0 kg € 214.- 5.0 kg

Z-Pro� le Inserts 90°

Model Z (mm) α S*

(mm)

835 m

m

Price Weight

415 m

m

Price Weight

CEZ 9.0 9 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 10.0 10 90° 1.8 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 11.0 11 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 12.0 12 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 13.0 13 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 14.0 14 90° 2 € 389.- 13.5 kg € 237.- 6.5 kg

CEZ 15.0 15 90° 2.3 € 389.- 13.5 kg € 237.- 6.5 kg

835 mm € 809.- 37.5 kg

415 mm € 453.- 18.7 kg

835 mm € 650.- 24.7 kg

415 mm € 350.- 12.3 kg

835 mm € 485.- 37.5 kg

415 mm € 272.- 18.5 kg

www.sm-tech.ro

132 133

R3 R3

5R3

1000 kN/m max.

BPR150.P10.10-RFA BPR150.P10.15-RFA BPU-RFA BPU-R BPU-S1000 kN/m max. 1000 kN/m max. 800 kN/m max. 800 kN/m max. 800 kN/m max.15

0

65

R 10

R 25

20

R 15

R 40

150

65

20

140

40

20

14

140

40

20

14

140

40

20

14

M6

HRC 60-62

R

C45: 560-710 N/mm2 C45: 560-710 N/mm2 C45: 560-710 N/mm2

800 kN/m max.

800 kN/m max.

AH

Ø

14

M8

Ø

H

M8

E30.22 800 kN/m max.

30

22 17

14M8

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

TOP.C10 TOP.C15

TOP.C25 TOP.C40

C53: 610-760 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2






Radius Tools

Radius Tools: R10-40



Model R (mm)

525 m

m

Price Weight

495 m

m se

gmen

ted

Price Weight

TOP.C10 10 € 40.- 1.3 kg € 154.- 2.7 kg

TOP.C12.5 12.5 € 42.- 2.0 kg € 207.- 2.8 kg

TOP.C15 15 € 48.- 3.0 kg € 237.- 3.8 kg

TOP.C17.5 17.5 € 53.- 4.0 kg € 244.- 4.7 kg

TOP.C20 20 € 60.- 5.2 kg € 287.- 6.6 kg

TOP.C25 25 € 89.- 8.1 kg € 386.- 7.5 kg

TOP.C30 30 € 116.- 11.7 kg € 488.- 11.3 kg

TOP.C35 35 € 176.- 16.0 kg € 605.- 15.1 kg

TOP.C40 40 € 227.- 20.7 kg € 662.- 19.5 kg




Material: C53 induction hard-ened 60-62HRc

Radius Tools




835 m

m

Price Weight

415 m

m

Price Weight

C17.12 25 17 22 € 82.- 2.5 kg € 50.- 1.2 kg

C20.15 30 20 27 € 72.- 3.7 kg € 43.- 1.8 kg

C22.17 35 22 32 € 104.- 5.0 kg € 59.- 2.4 kg

C24.20 40 24 34 € 88.- 7.0 kg € 54.- 3.5 kg

C29.25 50 29 39 € 96.- 10.0 kg € 55.- 4.7 kg

C34.30 60 34 44 € 116.- 13.5 kg € 71.- 6.7 kg

C45.35 70 45 55 € 234.- 20.3 kg € 128.- 10.0 kg

C45.40 80 45 55 € 268.- 23.0 kg € 144.- 11.5 kg

C60.45 90 60 70 € 325.- 34.0 kg € 175.- 17.0 kg

C70.50 100 70 80 € 342.- 43.5 kg € 195.- 21.7 kg


835 m

m

Price Weight

415 m

m

Price Weight

C13.08 16 13 € 59.- 2.00 kg € 36.- 1.00 kg

C13.09 18 16 € 59.- 2.00 kg € 36.- 1.00 kg

C16.10 20 16 € 50.- 2.00 kg € 30.- 1.00 kg

830 mm € 295.- 15.3 kg

410 mm € 173.- 7.6 kg

830 mm € 230.- 15.8 kg

410 mm € 140.- 7.8 kg

830 mm € 228.- 16.8 kg

410 mm € 138.- 8.3 kg

835 mm € 89.- 3.5 kg

415 mm € 50.- 1.7 kg

www.sm-tech.ro

6R3

DIES ROLLERI TYPE R3Content Explanation 136 - 137

Dies 90°, H=55 mm 138

Dies 88°, H=55 mm 139

Dies 85°, H=55 mm 139

Dies 80°, H=65 mm / H=85 mm 140

Dies 60°, H=55 mm / H=65 mm 140

Dies 30°, H=55 mm / H=60 mm 141

Dies 30°, H=70 mm 142

Dies, H=100 mm / H=120 mm / H=150 mm 143 - 145

Hemming Dies 146

Synthetic Dies, H=100 mm 147

Die Adapters 147

Dies Rolleri Type R3 are compatible with press brake machines from:- Bystronic-Beyeler RFA- Bystronic-Beyeler RF- Bystronic-Beyeler R- Bystronic-Beyeler S


Compatibility

www.sm-tech.ro

136 137

R3 R3

6R3

20

13

20

13

550

200100

100 40 35 30 25 20

495

170100 50 45 40 3035 25

1100

400

200100

100 75 60 50 40 30 20 15 10

250

50 45 40 35 30 25 25

1000 mm

500 mm

525 mm

60

10

2010

13







Dies Rolleri Type R3 are:

• compatible with press brake machines with a table groove for pins 13 x 20 mm:Bystronic-Beyeler, Bystronic-Hämmerle, Safan, SMD, Trumpf

• also applicable on all other press brake machines with Adapter-Systems and Adapter Rails(see pages 218-221).

All dies Rolleri Type R3 are by default equipped with a 13 x 20 mm tail.

In order to also use Rolleri Type R1 Dies, a 10 mm groove is milled and a percise grounded wedge bar / tail in 13 x 30 mm is inserted. For more speci� c information and prices go to page 252 in the Service Chapter.



Groove

Die Rolleri Type R1

Wedge Bar / Tail


Tang Modi� cation: Wedge Bar / Tail


Tool lengths and sectioningStandard

550 mm segmented / FW (8 segments)


495 mm segmented / F (8 segments)







press force line

press force line







Material

www.sm-tech.ro

138 139

R3 R3

6R3

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

BMR55.06.90

BMR55.10.90

BMR55.16.90

BMR55.08.90

BMR55.12.90

1150 kN/m max.

1100 kN/m max.

1200 kN/m max.

1100 kN/m max.

1200 kN/m max.

6

2015

55

13

15

25

90°

R 0,4 8

2015

55

13

15

25

90°

R 0,5

10

2015

55

13

20

25

90°

R 1,0 12

2015

55

13

20

25

90°

R 1,5

16

2055

1330

90°

R 2,0

BMR55.10.88

BMR55.16.88

BMR55.24.88

BMR55.12.88

BMR55.20.88

10

2015

55

13

20

25

88°

R 1,0 12

2015

55

13

20

25

88°

R 1,5

16

2055

1330

88°

R 2,0 20

2055

1330

88°

R 2,0

24

2055

1340

88°

R 3,0

1200 kN/m max.

1100 kN/m max.

1200 kN/m max.

1200 kN/m max.

1100 kN/m max.

BMR55.32.85 BMR55.40.85

32

2055

1350

85°

R 4,0 40

2055

1355

85°

R 4,0


42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2






Dies 90°, H=55 mm

1000 mm € 265.- 8.5 kg


1000 mm € 250.- 10.5 kg


1000 mm € 278.- 14.5 kg


1000 mm € 265.- 9.0 kg


1000 mm € 250.- 10.5 kg


1000 mm € 334.- 18.5 kg


1000 mm € 250.- 11.0 kg


1000 mm € 250.- 10.5 kg


1000 mm € 278.- 14.5 kg


1000 mm € 288.- 14.5 kg


Dies 88°, H=55 mm

1000 mm € 385.- 21.0 kg


1000 mm € 402.- 21.5 kg


Dies 85°, H=55 mm

www.sm-tech.ro

140 141

R3 R3

6R3

BMR65.80.80 BMR85.100.801700 kN/m max. 350 kN/m max.

350 kN/m max.

450 kN/m max.

200 kN/m max.

300 kN/m max.

2300 kN/m max.

BMR55.40.60 BMR55.50.60

40

2055

1355

60°

R 5,0 50

2055

1370

60°

R 5,0

60

2065

1380

60°

R 7,0

BMR65.60.60


1100 kN/m max.

BMR55.06.30

BMR55.10.30

BMR55.16.30

BMR55.24.30

BMR55.08.30

BMR55.12.30

BMR55.20.30

BMR60.32.30

6

2015

55

13

15

25

30°

R 0,6 8

2015

55

13

15

25

30°

R 0,8

10

2015

55

13

20

25

30°

R 1,0 12

2015

55

13

20

25

30°

R 1,5

16

2055

1330

30°

R 2,0 20

2055

1335

30°

R 2,5

24

2055

1340

30°

R 3,0 32

2060

1360

30°

R 4,0


500 kN/m max.

80

2065

13100

80°

R 10 100

2085

13125

80°

R 12

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies 80°, H=65 mm / H=85 mm

Dies 60°, H=55 mm, H=65 mm

1000 mm € 884.- 39.0 kg


1000 mm € 732.- 31.0 kg


1000 mm € 545.- 20.3 kg


1000 mm € 636.- 25.0 kg


1000 mm € 1,046.- 62.0 kg


Dies 30°, H=55 mm, H=60 mm

1000 mm € 322.- 8.0 kg


1000 mm € 300.- 10.0 kg


1000 mm € 334.- 13.5 kg


1000 mm € 363.- 15.5 kg


1000 mm € 300.- 10.0 kg


1000 mm € 348.- 14.0 kg


1000 mm € 505.- 23.0 kg


1000 mm € 322.- 9.2 kg


www.sm-tech.ro

142 143

R3 R3

6R3

200 kN/m max.

300 kN/m max.

350 kN/m max.BMR70.08.30

BMR70.12.30

BMR70.10.30

BMR70.16.30 450 kN/m max.

12

2070

1325

30°

R 1,5 16

2070

1330

30°

R 2,0

10

2015

70

13

20

25

30°

R 1,08

2015

70

13

20

25

30°

R 0,75

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

V

100

20

13D

86°

R

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

V

100

20

13D

80°

R

V

100

20

13D

84°

R






Dies 30°, H=70 mm

1000 mm € 322.- 13.1 kg


1000 mm € 322.- 14.7 kg


1000 mm € 322.- 16.7 kg


1000 mm € 322.- 12.8 kg


Dies, H=100 mm / H=120 mm

Model V (mm) R (mm) D (mm) kN/m max.

TMR100.04.86 4 0.6 20 450

TMR100.06.86 6 0.6 20 1200

TMR100.08.86 8 0.8 20 1150

WMR100.08.86 8 2.5 25 400

TMR100.10.86 10 1.0 20 1100

TMR100.12.86 12 1.0 25 1200

WMR100.12.86 12 2.5 25 500

TMR100.16.86 16 1.6 30 1200

TMR100.20.86 20 2.0 30 1150

TMR100.24.86 24 2.5 35 1200

TMR100.30.86 30 3.0 45 1200

TMR100.40.86 40 3.0 55 1200

TMR100.50.86 50 3.0 75 1500


TMR100.06.84 6 0.6 20 1200

TMR100.08.84 8 0.8 20 1150

TMR100.10.84 10 1.0 20 1100

TMR100.12.84 12 1.0 25 1200

TMR100.16.84 16 1.6 30 1200

TMR100.20.84 20 2.0 30 1150

TMR100.24.84 24 2.5 35 1200

Model V (mm) H (mm) R (mm) D (mm) kN/m max.

TMR100.60.80 60 100 5.0 75 1500

TMR100.70.80 70 100 5.0 85 1500

TMR100.80.80 80 100 5.0 100 1500

TMR120.90.80 90 120 8.0 110 1500

TMR120.100.80 100 120 8.0 120 1500

86° Dies, H=100 mm

84° Dies, H=100 mm

80° Dies, H=100 mm / H=120 mm

Individual drawings, available lengths and prices see pages 101-103


Individual drawings, available lengths and prices see page 105

www.sm-tech.ro

144 145

R3 R3

6R3

120

120

20

13145

60°

R 8,0

R 5,0

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

V

100

20

13D

30°

R

V

150

20

13

D

86°

R

V

150

20

13

D

84°

R

V

150

20

13

D

80°

R

V

150

20

13

D

30°

R

42Cr: 900-1150 N/mm2







TMR120.120.60 120 8.0 145 1000

60° Die, H=120 mm



TMR100.04.30 4 0.6 20 150

TMR100.06.30 6 0.6 20 400

WMR100.06.30 6 2.0 20 400

TMR100.08.30 8 1.0 20 400

WMR100.08.30 8 2.5 20 400

TMR100.10.30 10 1.0 20 400

WMR100.10.30 10 2.5 25 400

TMR100.12.30 12 1.0 25 400

WMR100.12.30 12 3.0 25 400

TMR100.16.30 16 1.6 30 500

TMR100.20.30 20 2.0 30 600

TMR100.24.30 24 2.5 40 650

TMR100.30.30 30 3.0 55 900

TMR100.40.30 40 5.0 60 900

30° Dies, H=100 mm


Dies, H=100 mm / H=120 mm / H=150 mm


TMR150.06.86 6 0.6 20 400

TMR150.08.86 8 0.8 20 400

TMR150.10.86 10 1.0 20 500

TMR150.12.86 12 1.0 25 500

TMR150.16.86 16 1.6 30 700

TMR150.20.86 20 2.0 30 700

TMR150.24.86 24 2.5 35 700

86° Dies, H=150 mm


Dies, H=150 mm


TMR150.06.84 6 0.6 20 400

TMR150.08.84 8 0.8 20 400

TMR150.10.84 10 1.0 20 500

TMR150.12.84 12 1.0 25 500

TMR150.16.84 16 1.6 30 700

TMR150.20.84 20 2.0 30 700

TMR150.24.84 24 2.5 35 700


TMR150.24.80 24 2.5 35 700

TMR150.30.80 30 5.0 45 900

TMR150.40.80 40 5.0 55 1200

TMR150.50.80 50 5.0 65 1500

84° Dies, H=150 mm

80° Dies, H=150 mm




TMR150.06.30 6 0.6 20 400

TMR150.08.30 8 1.0 20 400

TMR150.10.30 10 1.0 20 400

TMR150.12.30 12 1.0 25 400

TMR150.16.30 16 1.6 30 500

TMR150.20.30 20 2.0 35 600

TMR150.24.30 24 2.5 40 650

TMR150.30.30 30 3.0 55 900

TMR150.40.30 40 5.0 55 900

30° Dies, H=150 mm


www.sm-tech.ro

146 147

R3 R3

6R3

BPR.SM.195.28.8BPR.SM.195.28.6

BPR.SM.195.24.10 BPR.SM.195.24.12

80

59

R 1

10

60

20

13

8020

59

R 1

12

60

13

80

59

R 1

8

60

20

13

80

59

R 1

6

60

20

13

A

2XS

S S


TMN95.20 1000 kN/m max. 200 kN/m max.

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

20

95

35

60

20

19

13

INS20...

2035

α

V

524

α

AD5AD6

60

13,1

60

20,5

60

13,1

30 20,5

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

AD7

6013

4020

AD8-12.7 1000 kN/m max.

4813,1

30

12,77

20,5

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Hemming Dies








Synthetic Dies, H=100 mm

• easy handling • faster and easier exchange • preventing bending marks• decrease of post-processing of bended profi les • no contact of materials • higher product quality

More mark-free bending available see pages 222-229




Mounting example

Die Adapters






housing

sythetic die

bolted screws

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 15

0.8 3.0 12 20

1.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 35

0.8 1.6 32 50

1.0 1.0 40 60

1.25 2.5 50 80

835 mm € 360.- 12.0 kg

415 mm € 200.- 6.0 kg

835 mm € 145.- 0.40 kg

415 mm € 83.- 0.20 kg

1000 mm € 226.- 26.1 kg

500 mm € 125.- 13.0 kg

1000 mm € 201.- 12.0 kg

500 mm € 104.- 6.0 kg

1000 mm € 366.- 15.0 kg

500 mm € 212.- 7.5 kg

835 mm € 254.- 18.0 kg

415 mm € 149.- 9.0 kg

www.sm-tech.ro 7

RX

TOOLS ROLLERI TYPE RX

Tools Rolleri Type RX are compatible with press brake machines from:EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc.

With Adapter-Systems the tools Rolleri Type RX are also applicable on all other press brake machines.

Compatibility

Content Explanation 150

EHT: Explanation 151

Weinbrenner: Explanation 151

American: Explanation 152

American: Punches and Dies 152 - 155

Gasparini: Explanation 156

Gasparini: Radius Tools and Punches 156 - 158

Ajial-Axial: Explanation 159

Ajial-Axial: Punches and Adapters 159

Colgar: Explanation 160

Colgar: Punches and Radius Tools 160

LVD: Explanation 161

LVD: Punches 162

LVD: Hemming Tools 163

LVD: Dies 78° 164 - 165

LVD: Dies 30° 166

LVD: Multi-V-Dies 167

LVD: Adapters 168

Colly: Explanation 169

Colly: Punches 169 - 171

Colly: Dies 172 - 173

Hämmerle-Bystronic: Explanation 174

Hämmerle-Bystronic: Punches 174 - 179

Hämmerle-Bystronic: Punch Holders 180 - 181

Hämmerle-Bystronic: Radius Tools 182

Hämmerle-Bystronic: Die Holders 183

Hämmerle-Bystronic: Dies 184 - 187

www.sm-tech.ro

150 151

RX RX

7RX

R

α

α

55

40

35

45

26

18 4

64

H

821

R

α

25

3

42

H

710

R

α

ROLLERI TYPE RX ROLLERI TYPE RX





Tools Rolleri Type RX are:

• compatible with press brake machines from:EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc.

• with Adapter-Systems (see pages 210-221)also applicable on all other press brake machines.

• tools Rolleri type RX are available in any length

• customized sectioning available upon your measurements

• customized horn pieces available upon request

• own production facilities (no reseller or dealer)• tracking of every tool possible, with a unique serial number on every article after the quality control check. • precision grinding (tolerance of +/-0.01 mm)• guaranteed tool reproduction • exact parallelism • precise, consistent working height• tang retrofi tting and modifi cation possible (see pages 248-253) • very large stock availability

Punches Rolleri R Type have various tangs.

press force line

press force line

press force line

press force line

press force line

press force line

Explanation of Tools


Tang

Tool lengths, sectionings and horn types

Explanation We produce for you the Tools Rolleri Type RX EHT in a vast variety – custom, fast, economic and with precision.

Adapters for Rolleri Type RX EHT see pages 213-220

We produce for you the Tools Rolleri Type RX Weinbrenner in a vast variety – custom, fast, economic and with precision.

Adapters for Rolleri Type RX Weinbrenner see pages 213-221

Explanation

EHT

WeinbrennerIndications of precision ground areas:

inner radius 54-60 HRC

inner radius 54-60 HRC







Material

www.sm-tech.ro

152 153

RX RX

7RX

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

40

20

0

0

20

40

75°R

H

15,8

13,519

5,5 12,7

25,4

40

20

0

20

40

60

60

80

0

H

85°R

9

15,8

13,519

5,5 12,7

40

20

0

20

40

60

60

80

0

H

85°R

12,7

15,813

,519

5,5 12,7

65

40

20

0

20

40

60

60

80

0

H

75°R

15,8

13,519

5,5 12,7

25,4

40

20

0

0

20

40

85°R

H

15.8

13,519

5,5 12,7

9,5

38

40

20

0

0

20

40

28°R

H

15,8

13,519

5,5 12,7

25,4

40

20

0

20

40

60

60

80

0

H

28°R

15,8

13,519

5,5 12,7

31,75

ASP-18

ASP-15

1000 kN/m max.

1000 kN/m max.

ASP-14

ASP-9

1000 kN/m max.

660 kN/m max.

ASP-19 860 kN/m max.

ASP-135 ASP-24900 kN/m max. 700 kN/m max.

20R 25

9






Punches:• 838 mm• 415 mm• 805 mm segmented

9 segments (100 Horn left, 100, 50, 40, 20, 15, 10, 370, 100 Horn right)

Standard-Horn Typefor all segmentedPunches RolleriType RX American

Dies:• 838 mm• 415 mm• 805 mm segmented

8 segments (200, 50, 40, 20, 15, 10, 370, 100)


Punches American

ASP-

135-

16

H=125 / R=0.4

838 mmPrices upon

request

21.0 kg

415 mm 10.4 kg805 mmsegmented 20.1 kg

ASP-

14-1

6

H=127 / R=0.4

838 mmPrices upon

request

13.4 kg


ASP-

9-16

H=96 / R=0.4

838 mmPrices upon

request

12.8 kg


ASP-

15-1

6 H=95.9 / R=0.4838 mm Prices

upon request

13.4 kg415 mm 6.6 kg805 mmsegmented 12.9 kg

ASP-

24-1

6

H=127 / R=0.4

838 mmPrices upon

request

31.8 kg


ASP-

135-

31

H=125 / R=0.8

838 mmPrices upon

request

21.0 kg


ASP-

14-3

1

H=127 / R=0.8

838 mmPrices upon

request

13.4 kg


ASP-

18-3

1

H=96 / R=0.8

838 mmPrices upon

request

10.9 kg


ASP-

9-31

H=96 / R=0.8

838 mmPrices upon

request

12.8 kg


ASP-

15-3

1 H=95.9 / R=0.8838 mm Prices

upon request


ASP-

24-3

1

H=127 / R=0.8

838 mmPrices upon

request

31.8 kg


ASP-

135-

62

H=124.5 / R=1.6

838 mmPrices upon

request

21.0 kg


ASP-

14-6

2

H=126.5 / R=1.6

838 mmPrices upon

request

13.4 kg


ASP-

18-6

2

H=93.4 / R=1.6

838 mmPrices upon

request

10.9 kg


ASP-

9-63

H=95.5 / R=1.6

838 mmPrices upon

request

12.8 kg


ASP-

15-6

3 H=95.9 / R=1.6838 mm Prices

upon request


ASP-

24-6

2H=126.5 / R=1.6

838 mmPrices upon

request

31.8 kg


ASP-

135-

125 H=123.8 / R=3.2

838 mmPrices upon

request

21.0 kg


ASP-

14-1

25

H=126 / R=3.2

838 mmPrices upon

request

13.4 kg


ASP-

18-1

25

H=87.5 / R=3.2

838 mmPrices upon

request

10.9 kg


ASP-

9-12

5

H=94.8 / R=3.2

838 mmPrices upon

request

12.8 kg


ASP-

15-9

8 H=95.9 / R=2.5838 mm Prices

upon request


ASP-

15-1

25 H=96 / R=3.2838 mm Prices

upon request


ASP-

24-1

25

H=125.9 / R=3.2

838 mmPrices upon

request

31.8 kg


Punches American

ASP-

19-3

1

H=127 / R=0.8

838 mmPrices upon

request

13.8 kg


ASP-

19-6

2

H=124.5 / R=1.6

838 mmPrices upon

request

13.8 kg


ASP-

19-1

25

H=118.5 / R=3.2

838 mmPrices upon

request

13.8 kg


American

Please � nd the Punch Adapters in the adapter chapter on page 215

www.sm-tech.ro

154 155

RX RX

7RX

12,77

38,1

7015

,8

75°

60

R 4,0

12,77

50,8

7015

,8

75°

70

R 4,0

12,7

6,35

4915

,8

R 0,8

25,4

28°

12,7

9,5

4915

,8

R 1,2

25,4

28°

12,7

12,7

4915

,8

R 1,6

25,428°

12,77

15,8

49,2

15,8

85°

25,4

R 2,75

12,77

19

49,2

15,8

85°

30

R 3,0

12,77

25,4

7015

,8

85°

40

R 4,0

12,77

31,75

7015

,8

75°

50

R 4,0

12,77

25,4

7015

,8

75°

40

R 4,0

12,7

9,549

,215

,8

85°

18

R 2,75

25,4

12,7

12,7

49,2

15,8

85°

25,4

18

R 2,75

12,7

19

7015

,9

75°

30

R 3,0

ASD-85-625

ASD-85-375

ASD-85-100

ASD-75-100

ASD-85-750

ASD-85-500

ASD-75-125

ASD-75-750

1000 kN/m max.


1000 kN/m max.

1000 kN/m max.

C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

ASD-28-500950 kN/m max.


860 kN/m max.

C45: 560-710 N/mm2C45: 560-710 N/mm2

42Cr: 900-1150 N/mm2

ASD-28-250 ASD-28-375

ASD-75-200


1000 kN/m max.

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

1000 kN/m max.

C45: 560-710 N/mm2 C45: 560-710 N/mm2

ASD-75-150






Dies American Dies American

838 mmPrices upon

request

9.2 kg


838 mmPrices upon

request

8.0 kg


838 mmPrices upon

request

7.2 kg


838 mmPrices upon

request

17.6 kg


838 mmPrices upon

request

25.6 kg


838 mmPrices upon

request

10.5 kg


838 mmPrices upon

request

8.0 kg


838 mmPrices upon

request

7.8 kg


838 mmPrices upon

request

22.2 kg


838 mmPrices upon

request

17.6 kg


838 mmPrices upon

request

14.7 kg


838 mmPrices upon

request

8.4 kg


838 mmPrices upon

request

27.7 kg


www.sm-tech.ro

156 157

RX RX

7RX

30R 20

120°

13

GASP293-16 GASP170-161000 kN/m max. 1800 kN/m max.

293

30

255

170

30

255

C45: 560-710 N/mm2 C45: 560-710 N/mm2

GASP40.60.03

GASP30.60.20

GASP30.60.11.5

GASP35.40.40

GASP35.60.08

GASP30.60.32

GASP30.60.16

GASP55.40.60

4030

60°R 11,5

4030

60°R 16

4030

60°R 20

4030

60°R 32

4535

40°R 40

4535

60°R 8

5040

60°R 3

6555

40°R 60

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1800 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1500 kN/m max.

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Gasparini

Punches:• 525 mm• 495 mm segmented

8 segments (25, 30, 35, 40, 45, 50, 100, 170)• 500 mm segmented

3 segments (100 Horn left, 300, 100 Horn right)

Radius Tools Holder:• 522 mm• 563 mm segmented

9 segments (42, 47, 52, 57, 62, 67, 72, 77, 87)• 491 mm segmented

3 segments (97, 297, 97)

Radius Tools:• 525 mm• 590 mm segmented

9 segments (45, 50, 55, 60, 65, 70, 75, 80, 90)• 500 mm segmented

3 segments (100, 300, 100)

Standard-Horn Typefor all segmentedPunches RolleriType RX Gasparini


Radius Tools Gasparini

522 mm € 2,086.- 83.0 kg563 mmsegmented € 3,222.- 89.5 kg491 mmsegmented € 2,372.- 78.0 kg


Radius Tools Gasparini









www.sm-tech.ro

158 159

RX RX

7RX

40

20

0

20

40

60

80

100

60

80

100

120

200

70°R 3,0

016,7

30

255

40

20

0

20

40

60

80

100

60

80

100

120

200

26°R 3,0

0

30

255

40

20

0

20

40

60

80

100

60

80

100

120

200

26°R 6,0

0

30

255

GASP200.70.R3-30

GASP200.26.R6-30GASP200.26.R3-30 1300 kN/m max. 1300 kN/m max.

1000 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

AXP.100.90.1

AXP.72.85.1

AXP.72.90.1

AXP.72.24.R05

20

0

20

85°

72

15,5

26

18

5,5

1,0

20

0

20

90°

72

15,5

26

18

5,5

1,0

20

0

20

24°R 0,5

72

15,5

185,

5

40

20

0

20

40

90°

100

15,5

18

5,5

1,0

2045°

10

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

AD15 1000 kN/m max.

15,5

14

5018

5,5

100

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Ajial-AxialPunches Gasparini


Many more tools

available for Heavy

Duty on pages 234-235



Many more tools available upon request.

Compatible adapters see pages 213 and 217


9 segments (100 Horn left, 500, 100, 50, 45, 40, 35, 20, 100 Horn right)

Standard-Horn Pieces for all segmentedPunches RolleriType RX Ajial-Axial

Punches Ajial-Axial

1020 mm upon request 16.3 kg990 mmsegmented upon request 15.8 kg


Adapters Ajial-Axial



Rolleri Type RX Ajial-Axial Rolleri Type R1

More Punches and Dies available upon request. Compatible Adapter see pages 217


150 mm € 97.- 4.0 kg

www.sm-tech.ro

160 161

RX RX

7RX

40

20

0

20

40

60

80

60

80

100

0

38

18

60°

10

195

26°R 0,8

40

20

0

20

40

60

80

60

80

100

0

38

18

60°

10

195

60°R 0,8

40

20

0

20

40

60

80

60

80

100

0

38

18

60°

10

195

85°R 0,8

PAC195.85.R08

PAC195.26.R08

PAC195.60.R08

PAC175.14

C45: 560-710 N/mm2

18

14

60°

10

175

50

30R 20

120°

13

1000 kN/m max.


1000 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

22

32 37 42

13

517

1825

1022

1027

35

103210 15 20 30

35R 20

120°

10






Colgar LVD


8 segments (25, 30, 35, 40, 45, 50, 100, 170)• 500 mm segmented

3 segments (100 Horn left, 300, 100 Horn right)

Standard-Horn Pieces for all segmentedPunches RolleriType RX Colgar


Punches and Radius Tools Colgar




Compatible Radius holders see page 33

More Punches and Dies available upon request. Compatible adapter see pages 213, 216

Punches LVD have the following 4 di� erent tangs

Tang A Tang DTang CTang B


9 segments(100 Horn left, 25, 30, 35, 40, 45, 50, 125, 100 Horn right)

Dies:• 508 mm• 550 mm segmented

9 segments (25, 25, 30, 35, 40, 45, 50, 100, 200)

Hemming Tools:• 525 mm• 495 mm segmented

8 segments (25, 30, 35, 40, 45, 50, 100, 170)

Standard-Horn Pieces for all segmentedPunches RolleriType RX LVD


Punch Tangs

830 mm € 297.- 18.0 kg

412 mm € 169.- 9.0 kg

www.sm-tech.ro

162 163

RX RX

7RX

40

20

0

20

40

60

80

60

80

100

0

40

180

26°R 1

40

20

0

20

40

60

80

60

80

100

0

180

78°R 2

40

20

0

20

40

60

80

60

80

100

0

65

180

78°R 1

40

20

0

20

40

80

60

80

100

0

180

78°R 1

40

20

0

20

40

60

80

60

80

100

0

180

80

78°R 1

LP180.78.R1-A

LP180.26-R1

LP180.78.R1-C

LP180.78.R1-B

LP180.78-R2

700 kN/m max.

500 kN/m max.

500 kN/m max.

450 kN/m max.

1000 kN/m max.

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

40

20

0

20

40

60

80

60

80

100

0

168

20°R 0,6

58

8

40

20

0

20

40

60

80

60

80

100

0

168

20°R 0,6

58

10

40

20

0

20

40

60

80

60

80

100

0

168

20°R 0,6

58

12

LP.SP-190.20.8 LP.SM-190.20.8-12.7 / -12

LP.SM-190.20.10-12.7 / -12

LP.SM-190.20.12-12.7 / -12

LP.SP-190.20.10

LP.SP-190.20.12

80

59

R 1

10

60

19

B7

80

59

R 1

12

60

19

B7

80

59

R 1

8

60

19

B7

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

A

2XS

S SA

2XS

S S







Tang A: LPA180.78.R1-A


Tang A: LPA180.78.R1-B


Tang B: LPB180.78.R1-A


Tang B: LPB180.78.R1-B


Tang C: LPC180.78.R1-A


Tang C: LPC180.78.R1-B


Tang D: LPD180.78.R1-A


Tang D: LPD180.78.R1-B


Punches LVD

Tang A: LPA180.78.R1-C


Tang A: LPA180.78-R2


Tang B: LPB180.78.R1-C


Tang B: LPB180.78-R2


Tang C: LPC180.78.R1-C


Tang C: LPC180.78-R2


Tang D: LPD180.78.R1-C


Tang D: LPD180.78-R2


TangsA, B, C, Ds. p. 161





Tang A: LPA180.26-R1


Tang B: LPB180.26-R1


Tang C: LPC180.26-R1


Tang D: LPD180.26-R1


Hemming Tools LVD

Tang A: LPA.SP-190.20.8


B=12.7 mm


B=12.7 mm


B=12.7 mm






Tang B: LPB.SP-190.20.8


B=12 mm


B=12 mm


B=12 mm






Tang C: LPC.SP-190.20.8






Tang D: LPD.SP-190.20.8










S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 3.0 9 150.8 3.0 12 201.0 3.5 15 25

1.25 3.5 17 26

S (mm) A (mm)R.45

Kgf/mm2

t/m

R.70 Kgf/mm2

t/m0.6 1.2 23 350.8 1.6 32 501.0 1.0 40 60

1.25 2.5 50 80

www.sm-tech.ro

164 165

RX RX

7RX

LM90.06.78

LM90.10.78

LM90.08.78

LM90.12.78

400 kN/m max.

500 kN/m max.

400 kN/m max.

600 kN/m max.

12,77

690

19

78°

32

12

12,77

8

9019

78°

32

12

12,77

10

9019

78°

32

14

12,77

12

9019

78°

32

18

LM90.16.78

LM90.24.78

LM90.20.78

LM90.30.78

800 kN/m max.

1000 kN/m max.

1000 kN/m max.

1100 kN/m max.

12,77

16

9019

78°

32

25

12,77

20

9019

78°

32

12,77

24

9019

78°

32

12,77

30

9019

78°

40

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

LM90.40.78

LM90.60.78

LM90.100.78

LM90.50.78

LM90.80.78

12,77

40

9019

78°

50

12,77

50

9019

78°

60

12,77

60

9019

78°

70

12,77

80

9019

78°

90



1200 kN/m max.

12,77

100

9019

78°

120

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies 78° LVD









Dies 78° LVD







NEW

www.sm-tech.ro

166 167

RX RX

7RX

LM90.06.30

LM90.10.30

LM90.16.30

LM90.24.30

LM90.08.30

LM90.12.30

LM90.20.30

12,77

690

19

30°

32

16

12,77

8

9019

30°

32

18

12,77

10

9019

30°

32

25

12,77

12

9019

30°

32

12,77

16

9019

30°

32

12,77

20

9019

30°

40

12,77

24

9019

30°

50


380 kN/m max.

380 kN/m max.

300 kN/m max.

380 kN/m max.

550 kN/m max.

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

LM130 LM180

LM70 LM90

R 2

R 1

R 3

R 8

R 0,8R 5

R 10

130

130

6012 16

80 33

27

2415

1245

4040

1510

78°

78°

78°

78°

78°

78°

30°

180

180

140

100

10

10

4020

6020

78°

78°78°

78°

R 5

R 15

R 8

R 8

70

35 6,5

70

820

24 163 3

1234

312

78°

78°

78°78°78°

30°

R 1

R 1

R 4

R 1,5R 2

R 2 90

40 15

5515

9024

512

15

5 8

1620 78°

78°

78°78°

78°

30°R 1R 2

R 0,8

R 5

R 6

R 3

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies 30° LVD








Multi-V Dies LVD

V1 V2 V3 V4 V5 V6

V mm 12 12 35 24 16 8

Angle 30° 78° 78° 78° 78° 78°

kN/m max. 1300 600 1300 1200 950 500

V1 V2 V3 V4 V5 V6 V7

V mm 16 60 10 80 40 12 24

Angle 30° 78° 78° 78° 78° 78° 78°

kN/m max. 650 1500 650 1250 1500 480 1500

V1 V2 V3 V4 V5 V6

V mm 8 40 12 24 55 16

Angle 78° 78° 78° 78° 78° 30°

kN/m max. 550 1400 550 650 1000 1000

V1 V2 V3 V4

V mm 140 60 100 40

Angle 78° 78° 78° 78°

kN/m max. 550 650 700 320





www.sm-tech.ro

168 169

RX RX

7RX

AD20 LVD 1000 kN/m max.

60

AD1 1000 kN/m max.80

3050

14

40

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

AD8-12.7 AD9-12.71000 kN/m max. 1000 kN/m max.

4813,1

30

12,77

20,5

60

4019

12,77

40

20

0

20

40

60

60

120

88° 0,89

13,515,5

6,75

12,518

5,5

2

40

20

0

20

40

88°

100

0,8

13,515,5

6,75

12,518

5,5

2

20

0

20

90°

72

13,515,5

6,75

12,518

5,5

2

0,8

CP72.90.08

CP120.88.08 CP100.88.08-A

1045°

10

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

A31 A32

19

10

127

19

10

12,77







Tang A: AD1-A

150 mm € 90.- 3.1 kg

Tang B: AD1-B

150 mm € 90.- 3.1 kg

Tang C: AD1-C

150 mm € 90.- 3.1 kg

Tang D: AD1-D

150 mm € 90.- 3.1 kg




Adapters LVD

Tang A: AD20 LVD-A

150 mm € 266.- 3.6 kg

Tang B: AD20 LVD-B

150 mm € 266.- 3.8 kg

Tang C: AD20 LVD-C

150 mm € 266.- 4.0 kg

Tang D: AD20 LVD-D

150 mm € 266.- 4.0 kg

Bolted Adapters AW1 A-Dsee page 216




To use Dies Rolleri Type R1, a 10 mm groove is milled and polished in order to fi t a wedge bar / tail of the required measurment.

Wedge Bar / Tail: 12 x 29 mm for• Rolleri Type RX LVD

Wedge Bar / Tail: 12.7 x 29 mm for• Rolleri Type RX LVD

835 mm € 168.-

415 mm € 95.-805 mmsegmented € 264.-

835 mm € 168.-

415 mm € 95.-805 mmsegmented € 264.-


15 segments (100 Horn left, 30, 30, 30, 35, 40, 40, 45, 45, 50, 50, 55, 500, 100, 100 Horn right)

Standard-Horn Piecesfor all segmentedPunches RolleriType RX Colly

Punches Colly




Dies:• 1020 mm• 1250 mm segmented

14 segments (100, 30, 30, 30, 35, 40, 40, 45, 45, 50, 50, 55, 500, 200)


Colly

1000 mm € 366.- 15.0 kg

500 mm € 212.- 7.5 kg

835 mm € 219.- 17.0 kg

415 mm € 132.- 8.5 kg

www.sm-tech.ro

170 171

RX RX

7RX

40

20

0

20

40

60

80

100

60

80

100

200

85°

16

14,520

20

5,5

28

0,7

40

20

0

20

40

60

80

100

60

80

100

200

85°

1614

,520

5,5

28

0,712

CP200.85.07

CP120.85.07

CP100.85.07-A

CP200.85.07-A

CP120.85.07-A

CP72.85.07

40

20

0

20

40

60

60

120

85° 0,7

13,515,5

6,75

12,518

5,5

2

40

20

0

20

40

60

60

120

85° 0,7

13,515,5

6,75

12,518

5,5

2

40

20

0

20

40

85°

100

0,7

13,515,5

6,75

12,518

5,5

2

20

0

20

85°

72

0,7

13,515,5

6,75

12,518

5,5

2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

40

20

0

0

20

40

60

80

100

60

80

100

200

24°R 1

16

14,520

5,5

28

40

20

0

0

20

40

60

80

100

60

80

100

200

50°R 1

16

14,520

5,5

28

40

20

0

0

20

40

60

80

100

60

80

100

200

50°R 1

16

14,520

5,5

28

CP200.50.R1

CP120.50.R1

CP100.50.R1

CP200.50.R1-A

CP120.50.R1-A

CP200.24.R1

40

20

0

0

20

40

60

60

120

50°R 1

13,515,5

6,75

12,518

5,5

2

40

20

0

0

20

40

60

60

120

50°R 1

13,515,5

6,75

12,518

5,5

2

40

20

0

0

20

40

50°R 1

100

13,515,5

6,75

12,518

5,5

2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

C45: 560-710 N/mm2






Punches Colly






1020 mm € 1,187.- 49.0 kg1250 mmsegmented € 2,036.- 60.0 kg

Punches Colly







Bolted Adapters see page 217

www.sm-tech.ro

172 173

RX RX

7RX

30

60

80

115

15

R 4

R 1080°

30

80

110

115

15

R 4

R 1280°

M115.80.60 M115.80.80

12

30

22

115

R 2

R 1,5

R 250°

50°

R 28

30

16

115

R 2

R 2

R 1

R 250°

50°

M115.50.16 M115.50.22

30

30

40

115

R 3

R 350°

30

40

50

115

R 3

R 550°

M115.50.30 M115.50.40

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

11260

50

112

80 7085°

R 3

R 3

R 5

R 2

30

50

65

115

15

R 4

R 950°

8

30

16

115

R 2

R 2

R 1,5

R 3,524°

24°

M115.50.50 M115.24.16

MC112.3050 MC80.2050 / MC80.3050

MC74.2050 / MC74.3050 MC54.2050 / MC54.3050

V1 V2 V3

V9

54

54

V5V4

V6V8 V7

α

V1 V2 V3 V4

V9V8 V6V7

74

74 V5α

60

50

80

40

80 3085°

R 1R 2

R 3

R 2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2






Dies Colly







Dies Colly

V1 V2 V3 V4 V5 V6 V7 V8 V9

V mm 8 24 10 8 45 18 12 14 32

Angle 90° 85° 90° 90° 85° 85° 30° 85° 85°

R mm 0.8 0.8 2.0 0.8 2.0 1.0 2.0 2.0 2.0

V1 V2 V3 V4 V5 V6 V7 V8 V9

V mm 6 25 6 6 12 9 16 9 32

Angle 90° 85° 90° 30° 30° 90° 85° 90° 85°

R mm 0.5 1.0 0.5 2.0 0.5 1.0 0.5 1.5 1.0


3050 mm upon request 188.0 kg








www.sm-tech.ro

174 175

RX RX

7RX

H11.010.0

H11.002.0

H11.008.0H11.007.0

H11.001.0

H11.006.0600 kN/m max.

1000 kN/m max.


1000 kN/m max.

1000 kN/m max.

HRc 58-60 HRc 58-60

HRc 58-60

HRc 58-60 HRc 58-60

HRc 58-60

20

0

20

0

6

40

30°R 1

20

0

20

0

6

60

30°R 1

40

20

0

20

40

0

6

90

30°R 1

40

20

0

20

40

6

90

30° 0,2

40

20

0

20

40

0

8

6

90

30°R 2

40

20

0

20

40

0

8

6

90

30°R 1

LSX

LDXL

100100

L1

SX

DX

18

LSXLDX

25

L

DXSX

20

LSX LDXL






Hämmerle-Bystronic

Punches H11:

Punches H12:

Punches H21:

Dies H31, H41:

Model Length Price WeightH11.010.01.01 100 € 92.- 0.17 kgH11.010.02.01 50 € 97.- 0.09 kgH11.010.02.02 55 € 97.- 0.09 kgH11.010.02.03 60 € 97.- 0.10 kgH11.010.02.04 65 € 97.- 0.11 kgH11.010.02.05 70 € 97.- 0.12 kgH11.010.02.06 75 € 97.- 0.13 kgH11.010.02.07 80 € 97.- 0.14 kgH11.010.02.08 85 € 97.- 0.14 kgH11.010.02.09 90 € 97.- 0.15 kgH11.010.02.10 95 € 97.- 0.16 kgH11.010.04.01 75 DX € 128.- 0.12 kgH11.010.04.02 85 DX € 128.- 0.14 kgH11.010.04.03 95 DX € 128.- 0.15 kgH11.010.04.04 105 DX € 128.- 0.17 kgH11.010.04.05 115 DX € 128.- 0.19 kgH11.010.04.06 80 SX € 128.- 0.13 kgH11.010.05.01 75 SX € 128.- 0.12 kgH11.010.05.02 85 SX € 128.- 0.14 kgH11.010.05.03 95 SX € 128.- 0.15 kgH11.010.05.04 105 SX € 128.- 0.17 kgH11.010.05.05 115 SX € 128.- 0.19 kgH11.010.05.06 80 DX € 128.- 0.13 kg


Punches Hämmerle-Bystronic







www.sm-tech.ro

176 177

RX RX

7RX

40

20

0

20

40

60

60

030°R 1

140

6

40

20

0

20

40

60

60

90°

12

140

0,2

H14.021.0H11.034.0

H11.035.0H11.005.0

H11.033.1H11.003.0

H11.036.0H11.009.1





40

20

0

20

0

8

10

90

30°R 4

40

20

0

20

40

6

90

90° 0,2

40

20

0

20

40

0

8

6

90

R 3

40

20

0

20

0

9

10

90

R 5

40

20

0

20

0

9

12

90

R 6

140

10

HRc 58-60

HRc 58-60 HRc 58-60

HRc 58-60 HRc 58-60

HRc 58-60

HRc 58-60 HRc 58-60






Punches Hämmerle-BystronicPunches Hämmerle-Bystronic

Model Length Price WeightH14.021.01.01 100 € 99.- 1.09 kgH14.021.02.01 50 € 110.- 0.55 kgH14.021.02.02 55 € 110.- 0.60 kgH14.021.02.03 60 € 110.- 0.65 kgH14.021.02.04 65 € 110.- 0.71 kgH14.021.02.05 70 € 110.- 0.76 kgH14.021.02.06 75 € 110.- 0.82 kgH14.021.02.07 80 € 110.- 0.87 kgH14.021.02.08 85 € 110.- 0.93 kgH14.021.02.09 90 € 110.- 0.98 kgH14.021.02.10 95 € 110.- 1.04 kg








www.sm-tech.ro

178 179

RX RX

7RX

40

20

0

20

40

60

80

100

60

80

100

0

31

190

190

190

190

190

8,555°

40

20

0

20

40

60

60

16

1

140

010,550°

R 1

40

20

0

20

40

60

60

22

140

0 2,385°R 1

40

20

0

20

40

60

60

45

19

140

08,585°

R 1

40

20

0

20

40

60

60

59

28

140

08,5R 1

40

20

0

20

40

60

60

45

19

140

08,5R 2

40

20

0

20

40

60

60

45

19

140

0,2 08,5

40

20

0

20

40

60

60

45

19

140

08,5R 3

H12.014.0 H12.015.0

H12.053.0 H12.017.0

H12.052.0 H12.025.0

H12.019.0 H12.065.0





42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2
















www.sm-tech.ro

180 181

RX RX

7RX

C45: 560-710 N/mm2 C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

H21.003.0 H21.004.0

H21.005.0

H21.002.0

H22.006.0H21.010.0


1000 kN/m max.

1000 kN/m max.


155

68

260

310 42Cr: 900-1150 N/mm2

105

260

153

41,8 °

47 °






Model Length Price WeightH21.003.01.01 100 € 110.- 1.18 kgH21.003.01.03 200 € 212.- 2.36 kgH21.003.02.01 50 € 125.- 0.59 kgH21.003.02.02 55 € 125.- 0.65 kgH21.003.02.03 60 € 125.- 0.71 kgH21.003.02.04 65 € 125.- 0.77 kgH21.003.02.05 70 € 125.- 0.83 kgH21.003.02.06 75 € 125.- 0.89 kgH21.003.02.07 80 € 125.- 0.94 kgH21.003.02.08 85 € 125.- 1.00 kgH21.003.02.09 90 € 125.- 1.06 kgH21.003.02.10 95 € 125.- 1.12 kgH21.003.04.01 75 DX € 153.- 0.83 kgH21.003.04.02 85 DX € 153.- 0.94 kgH21.003.04.03 95 DX € 153.- 1.06 kgH21.003.04.04 105 DX € 153.- 1.15 kgH21.003.04.05 115 DX € 153.- 1.30 kgH21.003.04.06 80 SX € 153.- 0.89 kgH21.003.05.01 75 SX € 153.- 0.83 kgH21.003.05.02 85 SX € 153.- 0.94 kgH21.003.05.03 95 SX € 153.- 1.06 kgH21.003.05.04 105 SX € 153.- 1.12 kgH21.003.05.05 115 SX € 153.- 1.30 kgH21.003.05.06 80 DX € 153.- 0.89 kg




Punch holders Hämmerle-Bystronic



Punch holders Hämmerle-Bystronic

www.sm-tech.ro

182 183

RX RX

7RX

H22.013.0

H22.015.0

H22.014.01000 kN/m max.

1000 kN/m max.

1000 kN/m max.~1

18

R 6

R 12,5

~116

R 8

R 20

~103

R 18

R 45

H61.100.01 / H61.500.01

H61.100.03 / H61.500.03

H61.100.05 / H61.500.05

H61.100.07

H61.100.02 / H61.500.02

H61.100.04 / H61.500.04

H61.100.06 / H61.500.06

H61.100.08 / H61.500.08

8

8

8

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2









Die holders Hämmerle-Bystronic

Model Length Price WeightH61.100.01 100 € 70.- 0.63 kgH61.500.01 500 € 173.- 3.15 kg



Model Length Price WeightH61.100.07 100 € 48.- 0.65 kg






Rolleri Videos

Radius Tools Hämmerle-Bystronic

www.sm-tech.ro

184 185

RX RX

7RX

28

18,5

5

9

86

5090°

28

18,5

7

12

86

50

90°

28

10

16

86

90°

28

12

16

86

90°

10,9

86

1,2

x 45

°

19

R 1

21

86

R 3,5

28

16

86

R 2

28

2,2

x 45

°

16

86

R 3,5

28

2,2

x 45

°

86

R 2

1,7

x 45

°

32,1

40

86

R 2

1,7

x 45

°

25,6

34

86

R 4 39,2

48

8

7

51

86

R 0,6

13,95

H41.005.0 H31.021.0

H41.010.0 H31.016.0H41.012.0 H31.024.0

H31.010.2 H31.016.1H31.032.1 H31.005.0

H41.007.0 H31.040.11000 kN/m max. 500 kN/m max.

1000 kN/m max. 500 kN/m max.1000 kN/m max. 750 kN/m max.

550 kN/m max. 500 kN/m max.1200 kN/m max. 250 kN/m max.


C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2






Dies Hämmerle-Bystronic

Model Length Price WeightH41.005.01.01 100 € 143.- 0.94 kgH41.005.02.01 50 SX € 156.- 0.71 kgH41.005.02.02 55 DX € 156.- 0.71 kgH41.005.02.03 60 DX € 156.- 0.75 kgH41.005.02.04 65 DX € 156.- 0.75 kgH41.005.02.05 70 DX € 156.- 0.75 kgH41.005.02.06 75 DX € 156.- 0.85 kgH41.005.02.07 80 DX € 156.- 0.85 kgH41.005.02.08 85 DX € 156.- 0.85 kgH41.005.02.09 90 DX € 156.- 0.94 kgH41.005.02.10 95 DX € 156.- 0.94 kgH41.005.03.01 50 DX € 156.- 0.71 kgH41.005.03.02 55 SX € 156.- 0.71 kgH41.005.03.03 60 SX € 156.- 0.75 kgH41.005.03.04 65 SX € 156.- 0.75 kgH41.005.03.05 70 SX € 156.- 0.75 kgH41.005.03.06 75 SX € 156.- 0.85 kgH41.005.03.07 80 SX € 156.- 0.85 kgH41.005.03.08 85 SX € 156.- 0.85 kgH41.005.03.09 90 SX € 156.- 0.94 kgH41.005.03.10 95 SX € 156.- 0.94 kg













www.sm-tech.ro

186 187

RX RX

7RX

120

R 8110

144

R 8 60

75

120

R 890

122

H31.007.0

H31.013.0 H31.012.0

H31.090.01.01

H31.110.01.01

H31.006.0 H31.060.0

H31.007.2500 kN/m max.


1500 kN/m max.

1500 kN/m max.


500 kN/m max.

8

5

7

86

R 1

192,5

x 45

°

8

5

7,5

86

R 2,5

19

2 x

45°

8

12

86

R 3

283,2

x 45

°

8

7

51

86

R 2

13,95

8

11,5

86

R 1,5

283,2

x 45

°

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

42Cr: 900-1150 N/mm242Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2













Model Length Price WeightH31.090.01.01 100 € 606.- 8.15 kg

Model Length Price WeightH31.110.01.01 100 € 659.- 8.83 kg


www.sm-tech.ro

8

ROLLERI DIES ROLLA-VContent Explanation 190 - 191

Model 1 192

Model 2 193

Model 2.5 193

Model 3 194

Model 4 194

Adjustable Dies 195

Hemming- and Joggle Tools 195

www.sm-tech.ro

190 191

8

500 mm

200 mm

440

20253050100

200

15

450

2025303540100200

455

455060100

200

470

35404550100

200

DIES ROLLAV DIES ROLLAV





Content Explanation Content Explanation

• RVP Dies (Models 1, 2, 3) are compatible with press brake machines (60 mm die holder) from:ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

• RVS Dies (Models 1, 2, 3) are compatible with press brake machines (14 mm pins) from:Amada Single V style

• RVT Dies (Models 1, 2, 3) are compatible with press brake machines (12.7 mm / 13 mm pins) from:Bystronic, Hämmerle, Beyeler, Edwards, Safan, SMD, Trumpf

• RVT90 Dies (Models 1, 2, 3) are compatible with press brakes machines (12.7 mm pins) from:LVD

• RVM Dies (Models 2.5, 3, 4) are compatible with all press brake machines (various die holders)

• all dies are compatible on other press brakes machines with the means of adapter-systems or customized die holders.

• high precision grounded• Interchangability guaranteed • exact Parallelism• avoiding bending marks on the sheet metals • minimum borders bending mark free • no tool contamination throughout the bending of

galvanized sheet metal or aluminum• extremely short fl anges• less tool exchange • ideal for diagonal or tapered edges


Model Material Type Hardness of the material and the tool bodyHardness of the operating surfaces

after induction hardeningBody 1 / 2 / 2.5 / 3 / 4 42CrMo4 1100-1200 N/mm2 50 - 55 HRCInserts 1 Toolox 44 1450 N/mm2 through hardened 44 HRCInserts 2 / 2.5 / 3 / 4 Toolox 33 1100 N/mm2 55 - 58 HRC

Equivalent V size (mm)

Material Thickness (mm)

min. outside � ange (mm)

needed press force (kN)

max. tool load (kN/m) min. bending angle

Model 1Max. recommended thickness=1.5 mm (2.0 mm possible)

8

0.70 3.0 60 1000 40°

1.10 3.9 110 1000 35°

1.50 4.2 260 1000 35°

Model 2Max. recommended thickness=3.0 mm (4.0 mm possible)

15

2.00 8.5 200 1500 59°

3.00 9.3 460 1500 46°

3.20 9.3 550 1500 47°

Model 2.5Max. recommended thickness=5.0 mm (6.35 mm possible)

28

3.00 18.7 230 2000 67°

4.00 18.7 450 2000 60°

5.00 18.7 770 2000 57°

6.00 18.7 1200 2000 51°Model 3Max. recommended thickness=6.3 mm (8.0 mm possible)

384.00 22.5 270 2500 47°

6.00 22.5 800 2500 50°



Material

Standard

Model 1, 440 mm segmented (7 segments)





Model 2.5, 470 mm segmented (6 segments)


www.sm-tech.ro

192 193

8

RVP60-1 RVP65-2

RVT55-1 RVT60-2

RVS80-1 RVS80-2

RVT90-1 RVT90-2

RVT100-1 RVT100-2

RVM2.5




2000 kN/m max.



60

6028,5

14

80

28,5

100

13

28,5

13

55

28,5

12,77

28,5

90

60

65

41,5

14

80

41,5

100

13

41,5

13

60

41,5

12,77

90

41,5

100

60

65

42Cr: 1100-1200 N/mm2 42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2 42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2 42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2 42Cr: 1100-1200 N/mm2






Model 1 Model 2

NEW NEW

NEW NEW

NEW










500 mm € 1,032.- 11.3 kg450 mmsegmented € 2,690.- 10.6 kgNEW

NEW

NEW

NEW NEW

Ideal for thick material!

Making the impossible, possible ...

Use and application of Rolla-V dieswww.rolleritools.com/videos/rolla-v


Model 2.5

Rolleri Videos

www.sm-tech.ro

194 195

8

RVP100-3

RVT100-3

RVM90-4

RVPV3

RVHD3 RVHD4

RVM70-32500 kN/m max.

2500 kN/m max.

3000 kN/m max.

2500 kN/m max.


2500 kN/m max.

39 - 118

120

324

39 - 94

100

210

70

90

60

100

90

100

13

90

170

85

9070 - 220

150

510

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm242Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2 42Cr: 1100-1200 N/mm2

42Cr: 1100-1200 N/mm2






Model 3 Adjustable Dies

NEW

NEW




NEW

NEW

Model 4

500 mm € 4,331.- 50.0 kg

200 mm € 3,068.- 20.0 kg

500 mm € 6,417.- 98.0 kg

200 mm € 4,450.- 38.1 kgNEW

NEW

Hemming- and Z-Tools

Hemming Tool Joggle Tool

• bending possible up to the thickness of 30 mm• inserts hardened• no bending marks• adjustable openings

RVPV3 = 39-94 mmRVHD3 = 39-118 mmRVPV4 = 69-180 mm

• bends laser-cut sheet metal without damaging the tool • exact inner radius

Our advantages – Your Convenience

• V-Bending • fl at inserts

• Conical Bending• fl at inserts

• Radius-Bending• fl at inserts

• Radius-Overbending• concave inserts

NEW

Possible Die Holders:- 60 mm- 13 mm pin- 12.7 mm pin- 12.8 mm o� set pin

Possible Die Holders:- 60 mm- 13 mm pin- 12.7 mm pin- 12.8 mm o� set pin

NEW

Our Advantages – Your Convenience The model 4 tools and the adjustable dies are for bend-ing thick material and large radii. Material speci� cations vary greatly, therefore no speci� c data can be given. • Minimum borders are highly dependant

on the squareness of the component. • Enlargement and hole distortion will be greatly

reduced, however will be infl uenced depending on the type of material

• Radius bending is strongly infl uenced by the elastic return of specifi c material and fl ange-size.

For advice please contact us!

• U-Bending• V-inserts

Production according to your speci� cations

Production according to your speci� cations

per piece Price upon request per piece Price upon request

500 mm € 3,510.- 56.6 kg

200 mm € 2,106.- 22.7 kg

500 mm € 9,476.- 200.0 kg

200 mm € 5,978.- 80.0 kg

www.sm-tech.ro

9

ROLLERI CLAMPING SYSTEMSContent Explanation 198

Intermediates 199

Clamps 200 - 201

ROL100-System for Punches Rolleri Type R1 202 - 203

ROL1-System for Punches Rolleri Type R1 204 - 205

ROL4-System for Punches Rolleri Type R1 205

W-ROL PN-System for Punches Rolleri Type R2 206

ROL3-System for Punches Rolleri Type R3 and RX 207

ROL2-System for Dies Rolleri Type R1 208 - 209

Movable Die Clamps for Dies Rolleri Type R1 209

www.sm-tech.ro

199

R1

9

198

INT100

INT120-40 INT120

INT100 FISSOAD4

100

40

14

13 7

40

120

40

40

14

13 7

120

40

53

14

13 20

L=150 mm

L=150 mm L=150 mm

L=150 mmL=150 mm

100

40

14

13 7

40

1000 kN/m max.



C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

INT120-40-HD

INT150-40

INT150 INT120-HD 1600 kN/m max.1600 kN/m max.

L=150 mm

L=150 mm

L=150 mm L=150 mm

150

40

40

14

13 7

150

40

53

14

13 20

1000 kN/m max.

1000 kN/m max.

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

120

40

53

27

13 20

120

40

40

27

13 7

C45: 560-710 N/mm2

C45: 560-710 N/mm2

9060

3031

13

13 7

6





Article on stock



Press Brake

Crowning Wedge

Punch

Rolleri Type R1

Intermediate

CL

AM

PIN

G

Clamp

• for Punches Rolleri Type R1• made of: Tensioning device + intermediate• dual sided clamping (KDS-System)• horizontal tool exchange• see pages 199-201

horizontal

horizontal

horizontal

horizontal

vertical

vertical

vertical

vertical

NEW

Content Explanation Intermediates

• for Punches Rolleri Type R1• vertical tool exchange• can be used without modifying

Punches Rolleri Type R1• safety guard • including selectable intermediates• manual and pneumatic models available• see pages 202-203

• for Punches Rolleri Type R2• vertical tool exchange with

ROL1-System and QuickLock-System• Punches with Safety-Pins are inserted horizontal• safety guard• pneumatic model available only• see page 206

• for Punches Rolleri Type R1• vertical tool exchange• modi� cation necessary: Punches Rolleri Type R1

are equipped with spring-loaded balls• safety guard • including selectable intermediates• manual, pneumatic and hydraulic models available • dual sided clamping (KDS-System)• see pages 204-205

• for Punches Rolleri Type R3/RX• vertical or horizontal tool exchange• custom manufacturing• safety guard• hydraulic model available only • see page 207

• for Punches Rolleri Type R1• horizontal tool exchange• can be used without modifying

Punches Rolleri Type R1• safety guard • including selectable intermediates• manual and hydraulic models available • dual sided clamping integrated• see pages 205

• for Dies Rolleri Type R1• manual, pneumatic and hydraulic models available• see pages 208-209

• for Dies Rolleri Type R1• manual model available only • see page 209



per piece € 68.- 4.0 kgper piece € 73.- 1.8 kg

without wedge crowning without wedge crowning

Wedge crown

Wedge crown Wedge crown


Wedge crown

Punch extension

Punch extension

Intermediates avail-able upon request also in L=70 mm.

NEW

NEWNEW

Heavy DutyHeavy Duty

per piece € 95.- 5.2 kgper piece € 99.- 5.9 kg per piece € 83.- 4.5 kg

Wedge crownWedge crown Wedge crown

Standard-Clamping

ROL100 Clamping

ROL1 Clamping

W-ROL PN Clamping

ROL3 Clamping

ROL2 Clamping

ROL4 Clamping

Movable Die Clamps

www.sm-tech.ro

200 201

R1 R1

9

150

100

1711

60 60

15,5 15,515,5

60

60 60

15

60

1515

150

100

1711

Fe37: 370-470 N/mm2

Fe37: 370-470 N/mm2 Fe37: 370-470 N/mm2

Fe37: 370-470 N/mm2

Fe37: 370-470 N/mm2

KDS

ST60 / ST60R / STG60

STX60 / STX60R / STXG60

L=150 mm

L=150 mm L=150 mm

L=150 mm

ST60

STX60

ST60R

STX60R

STG60

STXG60

60 60

17 17

60

17

150

100

1711

50 50 50

150

100

1711

15 15 15

ST50 / ST50R / STG50

STL60 / STL60R / STLG60

ST50

STL60

ST50R

STL60R

STG50

STLG60

KDS

ROLLERI CLAMPING SYSTEMS ROLLERI CLAMPING SYSTEMS





needed clamps Length of press brake

4 pieces 835 mm

6 pieces 1250 mm

11 pieces 2100 mm

14 pieces 2600 mm

16 pieces 3100 mm

21 pieces 4100 mm

Compatible Intermediates on page 199

• Rapid Clamping Systems allow a fast horizontal tool exchange

• Plastic Pressure Strip improves the clamping especially with short tool pieces.

Clamps

Our Advantages – Your Convenienceper piece € 42.- 0.5 kg

Compatible for Standard Punches Rolleri Type R1

ROL1 CLAMP3 – manual – hydraulic – pneumatic

includes a tensioning device without intermediates

L=150 mmhorizontal tool exchange

including selectable intermediates

Model with Intermediate Price

ROL1CLAMP3manual

INT100 € 196.-INT120 € 207.-INT150 € 254.-INT100 FISSO € 197.-INT120-40 € 231.-


ROL1CLAMP3hydraulic

INT100 € 324,-INT120 € 335,-INT150 € 382,-INT100 FISSO € 325,-INT120-40 € 359,-

Model with Intermediate PriceROL1CLAMP3pneumatic

INT120 € 326,-

INT150 € 381,-

ROL1 CLAMP3without Intermediate € 122.-

Crowning Wedge

Crowning Wedge

Clamp

Example of manual model

Intermediate

Intermediate

horizontal

Application of Clamping System ROL1 CLAMP3: www.rolleritools.com/videos/rol1-clamp3

Rolleri Videos

Clamps

Plastic Pressure Strip




ST50 € 12.- 0.70 kg

ST50R € 15.- 0.50 kg

STG50 € 38.- 0.70 kg

STL60 € 30.- 1.00 kg

STL60R € 33.- 0.80 kg

STLG60 € 44.- 1.00 kg

STX60 € 35.- 0.85 kg

STX60R € 37.- 0.50 kg

STXG60 € 48.- 1.00 kg

ST60 € 17.- 0.80 kg

ST60R € 19.- 0.85 kg

STG60 € 33.- 0.80 kg

horizontal

horizontal

www.sm-tech.ro

202 203

R1 R1

9






• fast vertical tool exchange for all Punches Rolleri Type R1

• can be used without modifying Punches Rolleri Type R1

• safe and fast tool exchange

• signifi cant savings on your setup costs

• no falling out of tools

• available in manual and pneumatic models

• Mounting:Simply from the bottom into the housing, tighten – DONE!

• Disassembly:Untighten, gently lift tool and remove downwards.

• Easy to mount on your press brake.A conversion of the press brake is not necessary.

• For Press Brake Machines and Punches Rolleri Type R1:(ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.)


… the newest innovation from our Research and Development Department

ROL100-System for Punches Rolleri Type R1 ROL100-System for Punches Rolleri Type R1

ROL100 – manual

ROL100 – pneumatic

L=150 mmvertical tool exchange


L=150 mmvertical tool exchange



ROL100manual

INT100 € 219.-

INT120 € 230.-

INT150 € 277.-

INT100 FISSO € 219.-


ROL100pneumatic

INT100 € 411.-

INT120 € 422.-

INT150 € 469.-


The ROL100-System is suit-ed for Standard-Punches. There are no modi� cations necessary!

vertical

vertical

NEW

NEW

Pneumatic connection

www.sm-tech.ro

204 205

R1 R1

9

ROL1 KDS






The system was designed on a press brake machine setup, that allows a maximal distance of 70 mm from the correlating clamping systems (upper and lower). The minimal number of spring-loaded balls in the clamping system should be considered, if the distance is larger than 70 mm. The minimal amount of spring-loaded balls,depends on the weight and the length of each tool.

Crowning Wedge

Clamp

Intermediate

ROL1-System for Punches Rolleri Type R1

• vertical clamping of tools is possible on press brakes thanks to a row of spring-loaded balls which are also used as safety guards to prevent the falling out of tools.

• complete mechanic functioning fast clamping system for press brake machines.

• Productivity and Versatility of the press brake machines will be increased.

• Signifi cant reduction in the set-up times when chang-ing tools

In order to use the ROL1 System, the punches are modi� ed and equipped with spring-load-ed balls.ROL1 can be used on all press brakes with standard tang intermediates of Rolleri Type R1.

Punch with spring-loaded balls

ROL1 CLAMP1 – manual ROL1 PN CLAMP1 – pneumaticL=150 mmvertical tool exchangeincluding selectable intermediates

L=150 mmvertical tool exchangeincluding selectable intermediates


Mounting example

Intermediate

INT100

Clamp

ROL1 CLAMP1

Punch

Rolleri Type R1with spring-loaded balls

Application of Clamping SystemsROL1 CLAMP1: www.rolleritools.com/videos/rol1-clamp1

Rolleri Videos

vertical vertical


ROL1CLAMP1



ROL1 PNCLAMP1

INT120 € 341.-INT150 € 396.-

ROL1 CLAMP1without Intermediate € 137.-

L=150 mmhorizontal tool exchangeincluding selectable intermediatesintegrated KDS-System

L=150 mmhorizontal tool exchangeincluding selectable intermediatesintegrated KDS-System



L=150 mmvertical tool exchangeincluding selectable intermediates

L=150 mmvertical tool exchangeincluding selecta-ble intermediates

Detailed information about intermediates on page 199

ROL4 – hydraulicROL4 – manualModel with Intermediate Price

ROL4manual

INT100 € 232.-

INT120 € 243.-

INT150 € 290.-



ROL4hydraulic

INT100 € 354.-

INT120 € 365.-

INT150 € 412.-


INT120-40 € 476.-horizontal

horizontal

Application of hydraulic clamping ROL4www.rolleritools.com/videos/rol4-hydraulic-clamping

Rolleri Videos The ROL4-System is suitable for Standard-Punches Rolleri Type R1. There are no modi-� cations necessary!

ROL1 HYD CLAMP1 – hydraulic

vertical

vertical


ROL1 HYDCLAMP1


Model with Intermediate Price Clamp1 Price Clamp3

ROL1 KDS

INT100 € 308.- € 278,-INT120 € 322.- € 292,-INT150 € 352.- € 322,-INT100 FISSO € 310.- € 280,-INT120-40 € 365.- € 335,-

horizontal

www.sm-tech.ro

206 207

R2 R3/RX

940

130

40

130

79

35

80

35

L=515 mm






W-ROL PN – pneumaticper piece € 1,200.- 26.8 kg/m

W-ROL PN for Punches Rolleri Type R2

• vertical tool exchange of punches with:- ROL1-System- QuickLock-System

• Horizontal tool exchange of punches with safety pins

• signifi canly more effi cient bending productivity

vertical

500 mm Price upon request

ROL3 HYD – hydraulic

ROL3-System for Punches Rolleri Type R3 and RX

• can be used on press brake machines with diff erent tang types

• custom manufacturing possible upon request

• signifi cantly more effi cient bending productivity

vertical

Equip your press brake with our ROL3 system in order to use the advantages of a hydraulic clamping system!

horizontal

Our Advantages – Your Convenience Our Advantages – Your Convenience

Examples of ROL3 with various systems

for Type Beyeler-RFA

for Type America

for Type LVD

for Type Beyeler-S

for Type Beyeler-R

for Type Beyeler-RF

vertical tool exchange horizontal tool exchange

www.sm-tech.ro

208 209

R1 R1

9

L=1075 mm

L=1075 mm

L=500 mm

L=500 mm

L=500 mmL=1075 mm

ST50-S50

16 170

1

Fe37: 370-470 N/mm2






The ROL2 System is a system which is used to secure the die into place. It is made up of a special bar (known as ROL2 CLAMP1, L=500 mm), which is operated through a centralized lever. The ROL2 System has a built in spring mechanism and the clamp plates ROL2 CLAMP1 are positioned in the in-ner lining of the system, which can be opened or tight-ened for the die to be perfectly secured.A special rubber insert inside the clamp plates grants the best positioning for the tools. The press force of the clamp plates is evenly distribuited along the complete length. Therefore short tools are also securely fastened. At a press brake of 3 meters, for example; all dies are secured with 6 simple hand movements.

• Directly on the die holder with 60 mm width- use of existing holes for the standard clamp plates (hole distance 100 mm)- alternatively modifi cations of the existing threaded holes necessary- system is compatible for press brakes with automatic cowing tables

• Directly on the die holder with 90 mm width- use of existing holes for the standard clamp plates (hole distance 100 mm)

- altertively modifi cations of the existing threaded holes necessary

- for the use of dies Rolleri Type R1, two 15 mm wide inserts are mounted and ground (securing with pins)

- with rubber corners, the use of short tools is possible and are perfectly secured.

• With Die Holder on the Die Rail- 60 x 55 mm Die Holder, ground and induction hardened.

• fast exchange of tools

• very time saving

• reduced production costs

• signifi cantly increased profi tability

• improved competitiveness

ROL2-System for Dies Rolleri Type R1

Explanations Application


• lowerable clamping plate • signifi cantly easier exchange of tools, due the

possibility of removing the tool by sliding it out and not lifting the tool.

Movable Die Clamps for Dies Rolleri Type R1

movable die holders ST50-S:www.rolleritools.com/videos/movable-die-holders

Rolleri Videos



ROL2 – pneumaticClamp incl. Die holder

60 mm table € 969.- 23.0 kg

90 mm table € 1,105.- 31.7 kg

only Clamp

60 mm table € 466.- 5.0 kg

90 mm table € 575.- 5.5 kg

ROL2 – manual ROL2 – hydraulic

ROL2-System for Dies Rolleri Type R1

Clamp incl. Die holder

60 mm table € 640.- 38.0 kg

90 mm table € 776.- 58.0 kg

only Clamp

60 mm table € 265.- 4.0 kg

90 mm table € 374.- 4.5 kg

only Clamp

60 mm table € 450.- 5.0 kg

90 mm table € 560.- 5.5 kg

Clamp incl. Die holder

60 mm table € 910.- 23.0 kg

90 mm table € 1,143.- 31.7 kg

www.sm-tech.ro

10

ROLLERI ADAPTERSPunch Adapters 212 - 215

Bolted Adapters 216 - 217

Die Adapter Rails 218

Die Adapters 219 - 221

Modi� cation: Wedge Bar / Tail 221

www.sm-tech.ro

10

212 213

20

14

178,4

5080

120

AD3

AD22

1000 kN/m max.

1000 kN/m max.

AD1 1000 kN/m max.

80

3050

14

40

22

32 37 42

13

517

1825

1022

1027

35

103210 15 20 30

AD11 1000 kN/m max.

20

14

4050

120

AD10 1000 kN/m max.22

4014

4631

36

113

AD12 AD23

AD13

AD15

AD14

AD16


1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

18

14

60°

10

120

4050

14

6450

140

26

821

15,5

14

5018

5,5

100

0.6250.5

1.96

80.

750

0.531

3.90

0

20

4014

4631

36

113

1414

14

6250

140

20

1414

14

4269

31

142

25

40

710

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

ROLLERI ADAPTERSROLLERI ADAPTERS





Punch Adapters Punch Adapters


Rolleri Type R3 Beyeler R Rolleri Type R1


Rolleri Type RX EHT Rolleri Type R1


Tang A: AD1-A

150 mm € 90.- 3.1 kg

Tang B: AD1-B

150 mm € 90.- 3.1 kg

Tang C: AD1-C

150 mm € 90.- 3.1 kg

Tang D: AD1-D

150 mm € 90.- 3.1 kg

Tangs LVD


With adapters you can use the vast amount of Punches Rolleri Type R1!

Rolleri Type RX Colgar Rolleri Type R1

Rolleri Type RX Weinbrenner Rolleri Type R1


Rolleri Type RX Gas-parini Rolleri Type R1

Rolleri Type American Rolleri Type R1

NEW

150 mm € 90.- 3.3 kg

150 mm € 90.- 3.4 kg150 mm € 102.- 3.0 kg 150 mm € 102.- 3.0 kg

150 mm € 97.- 4.0 kg

150 mm € 102.- 1.5 kg 150 mm € 90.- 5.0 kg

150 mm € 102.- 3.2 kg

5.9 inch € 97.- 4.0 kg150 mm € 178.- 3.4 kg

TangA

TangD

TangC

TangB

www.sm-tech.ro

10

214 215

AD19-A

AD29

AD20


1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

10

13

8,413

3090

216

73,5

4

13

8,413

30

30

67

73,5

60

ADX

AD28

ADX2

BAC

14

E

DH

40

AD20 LVD 1000 kN/m max.

22

32 37 42

13

517

1825

1022

1027

35

103210 15 20 30

60

821

64

127

90

60

26

18

710

60

25

19

42

10770

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

INT67-79

INT100-N (Newton)INT100-A / INT120-A

INT80-100 1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

BAC

14

E

DH

(67/

79)

40

BAC

14

E

DH

(80/

100)

40

100

30

14

13 7

40

119

19

40

14

40

15,8

5,5

3,1

100

/ 120

3040

13 7

40

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

H2

H1

C45: 560-710 N/mm2

INT120-40-A 1000 kN/m max.

120

30

13 20

40 (1.57)






Punch Adapters Punch Adapters

Rolleri Type R1 Rolleri Type RX LVD


Type X Rolleri Type R1

Producation according to your speci� cations

Type X Rolleri Type R2

Producation according to your speci� cations

Tang A: AD20 LVD-A

150 mm € 266.- 3.6 kg

Tang B: AD20 LVD-B

150 mm € 266.- 3.8 kg

Tang C: AD20 LVD-C

150 mm € 266.- 4.0 kg

Tang D: AD20 LVD-D

150 mm € 266.- 4.0 kg

Tangs LVD


Pneumatic Adapters see page 206

TangA

TangD

TangC

TangB



NEW

NEW NEW

NEW

Bolted Adapters AW, P. 216-217www.rolleritools.com/videos/bolted-adapters

Rolleri Videos

150 mm € 137.- 6.0 kg

150 mm € 305.- 4.5 kg

150 mm € 266.- 4.0 kg

150 mm € 90.- 3.5 kg

150 mm € 320.- 5.0 kg

150 mm € 266.- 4.0 kg 150 mm € 167.- 3.5 kg

150 mm € 171.- 3.5 kg

835 mm € 446.- 20.5 kg

415 mm € 355.- 10.0 kg

835 mm € 512.- 25.0 kg

415 mm € 435.- 12.5 kg

INT100-A (American)

horizontal

suitable Models:

- Manual system (ST60, STL60, STX60 etc.), see page 200

- Fast Clamping (ROL1 Clamp3), see page 201

- Hydraulic system(ROL1 Clamp3 HYD),see page 201

INT120-A


INT100-A

150 mm € 171,- 3.5 kg

suitable Models:



- Pneumatic system only on INT120-A (ROL1 Clamp3 PN), see page 201


horizontal

suitable Models:




horizontal

suitable Models:



horizontal

150 mm upon request 6,0 kg

www.sm-tech.ro

10

216 217

14

3732

25

14

4232

35

AW1-C AW1-D1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

AW15 AWC161000 kN/m max. 1000 kN/m max.

14

1832

15,5

14

2032

18

14

6432

26

14

4232

20

AW13 AW141000 kN/m max. 1000 kN/m max.

14

2032

15,613,5

14

D

E

32

CA

B

AWC13.5 AWX

INT35 INT35-A1000 kN/m max. 1000 kN/m max.

BA

C

14

15E

35D

0.551

0.6250.500

0.21

90.5

90

0.250

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

14

2232

13

5

14

3232

18

AW1-A AW1-B1000 kN/m max. 1000 kN/m max.

14

6232

20

14

4032

18

AW10 AW121000 kN/m max. 1000 kN/m max.

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

14

40,5

32

20

14

4632

22

AW3AW11 1000 kN/m max.1000 kN/m max.

C45: 560-710 N/mm2 C45: 560-710 N/mm2






Bolted Adapters Bolted Adapters


Rolleri Type RX LVD A Rolleri Type R1

Rolleri Type RX LVD C Rolleri Type R1

Rolleri Type RX Colgar Rolleri Type R1

Rolleri Type RX LVD B Rolleri Type R1

Rolleri Type RX LVD D Rolleri Type R1



Do you prefer our QuickLock or ROL1-System? Contact us now!

835 mm € 150.- 10.0 kg


835 mm € 150.- 4.5 kg


835 mm € 150.- 9.7 kg


835 mm € 150.- 7.0 kg


835 mm € 150.- 6.3 kg


835 mm € 150.- 11.5 kg


835 mm € 150.- 3.0 kg


835 mm € 150.- 9.0 kg


NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

32.87 inch € 243.- 5.0 kg

16.34 inch € 183.- 2.5 kg

31.69 inchsegmented € 352.- 4.8 kg

835 mm € 243.- 4.0 kg




Rolleri Type RX Gas-parini Rolleri Type R1

Rolleri Type RX Colly Rolleri Type R1

835 mm € 150.- 12.6 kg


835 mm € 150.- 4.6 kg


835 mm € 150.- 8.0 kg


835 mm € 150.- 5.0 kg


Individual Rolleri Type R1

Rolleri Type RX Colly Rolleri Type R1

835 mm € 150.- 3.0 kg


835 mm € 150.- 4.8 kg


NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

www.sm-tech.ro

10

218 219

C 2000/S / C 2500/S / C 3000/S / C 4000/S TC 2000/S / TC 2500/S / TC 3000/S / TC 4000/S

C 1050/R

60

M8

97

2712

M8

3010

6080

60

90120

35

15

M8

3010

6080

2

C 1050/RS

C 1050-90

M8

60

13,1

3520

,5

AD5

AD6

60

13,1

60

20,5

60

13,1

30 20,5

1000 kN/m max.

1000 kN/m max.

1000 kN/m max.

60

13,1

60

20,5

60

13,1

30 20,5

6013

4020

AD7

6013

4020

AD24 1000 kN/m max.

5527

1212,5 60

15

12

4272

5527

1212,5 60

15

12

4272

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Die Adapter Rails Die Adapters

AD6 Example of Application








NEW

NEW


C 2000/S 2100 mm € 518.- 27.0 kg

C 2500/S 2600 mm € 639.- 34.0 kg

C 3000/S 3100 mm € 761.- 40.0 kg

C 4000/S 4100 mm € 967.- 53.0 kg


TC 2000/S 2100 mm € 543.- 30.0 kg

TC 2500/S 2600 mm € 673.- 37.0 kg

TC 3000/S 3100 mm € 766.- 44.0 kg

TC 4000/S 4100 mm € 1,065.- 59.0 kg


C 1050/R 1050 mm € 177.- 15.0 kg

C 1050/R/C 520 mm € 101.- 7.5 kg


C 1050-90 1050 mm € 290.- 27.2 kg

C 1050-90/C 520 mm € 174.- 13.5 kg


C 1050/RS 1050 mm € 233.- 15.0 kg

C 1050/RS/C 520 mm € 134.- 7.5 kg

1000 mm € 226.- 26.1 kg

500 mm € 125.- 13.0 kg

1000 mm € 201.- 12.0 kg

500 mm € 104.- 6.0 kg

835 mm € 254.- 18.0 kg

415 mm € 149.- 9.0 kg

835 mm € 505.- 28.5 kg

415 mm € 280.- 14.2 kg

www.sm-tech.ro

10

220 221

AD8-12.7

AD9-12.7

1000 kN/m max.

1000 kN/m max.

4813,1

30

12,77

20,5

60

4019

12,77

AD25

AD26

1000 kN/m max.

1000 kN/m max.

55

13,1

4021

55

13,1

4021

3537

1212,5 60

25

12

4272

3537

1212,5 60

25

12

4272

AD17

AD18

1000 kN/m max.

1000 kN/m max.

2.362

1.57

50.

625

0.47

2

0.50

0.590

0.512

1.397

0.9250.925

0.374

1.61

4 0.78

7

AD27 1000 kN/m max.

35

13,1

4021

35

13,1

4021

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

60






Die Adapters



Type American Rolleri Type R1

Type American Rolleri Type R1


Rolleri Type RX Weinbrenner Rolleri Type R2/R3

Die Adapters

Mounting example

NEW NEW

NEW

In order to use the dies Rolleri Type R1 on other press brake machines, a 10 mm groove is milled to insert a ground wedge bar / tail into the die.

Speci� c information and prizes are found in the Rolleri Service / Modi� cations Chapter (see page 252)


Wedge Bar / Tail (W x H) System

13 x 30 mmRolleri Type R2 and R3

(Bystronic-Beyeler/Safan/Trumpf etc.)55 x 55 mm Rolleri Type RX EHT

12.7 x 29 mm Rolleri Type RX LVD35 x 55 mm Rolleri Type RX Weinbrenner

AD9-12.7 Example of Application

AD8-12.7 Example of Application





Rolleri Type RX EHT Rolleri Type R2/R3


Groove

Die Rolleri Type R1

Wedge Bar / TailH

W

1000 mm € 366.- 15.0 kg

500 mm € 212.- 7.5 kg

835 mm € 219.- 17.0 kg

415 mm € 132.- 8.5 kg

500 mm € 235.- 7.5 kg

835 mm € 530.- 23.0 kg

415 mm € 295.- 11.4 kg

32.87 inch € 366.- 18.0 kg

16.34 inch € 209.- 9.0 kg

32.87 inch € 212.- 18.0 kg

16.34 inch € 121.- 9.0 kg

500 mm € 210.- 4.5 kg

www.sm-tech.ro

11

Prevention of Bending Marks 224

Bending Foil Holder/Tensioner 224

Bending Foil 225

PU-Holder and PU-Upholstery 226 - 227

Synthetic Dies 228 - 229

ROLLERI MARK FREE BENDING

www.sm-tech.ro

224 225

11

CT

R 0,8 R 10

ROLLERI MARK FREE BENDING ROLLERI MARK FREE BENDING





Prevention of Bending Marks Bending Foil

One of the challenges of bending is to prevent the pro� le of having bending marks, such as; scratches and abra-sions on the surface areas. Especially of Pro� le made of: • Stainless Steel • Aluminium• painted metal panels It is often the case of a line building from the contact of the sheet metal with the die. This is the cause of friction of sheet metal on small radius. In order to prevent this markings, the following solutionsare possible: • Bending Foil • PU-Upholstery • Plastic Dies • enlarged opening radius on special T-Dies

Bending Foil - Holder / Tensioner

• Prevention of scratches and abrasions on bent sheet metals • No post-processing necessary, therefore time and cost saving • No contamination of bended pieces • increases the product quality • easy handling

T-Dies (TR) with an enlarged opening radius for the prevention of bending marks see pages 54-55, 60-61

Standard T-Die with small opening radius

causes visible bending marks

T-Die TR with an enlarged opening radius

reduces visibly the bending marks


Model Thickness (mm) Width (mm) Length (m) Price

Rol� lm 3-0.4-100 0.4 100 3 € 25.-

Rol� lm 10-0.4-100 0.4 100 10 € 75.-

Rol� lm 20-0.4-100 0.4 100 20 € 145.-

Rol� lm 30-0.4-100 0.4 100 30 € 200.-

Rol� lm 3-0.6-150 0.6 150 3 € 40.-

Rol� lm 10-0.6-150 0.6 150 10 € 120.-

Rol� lm 20-0.6-150 0.6 150 20 € 235.-

Rol� lm 30-0.6-150 0.6 150 30 € 300.-

Rol� lm 3-0.6-200 0.6 200 3 € 55.-

Rol� lm 10-0.6-200 0.6 200 10 € 160.-

Rol� lm 20-0.6-200 0.6 200 20 € 310.-

Rol� lm 30-0.6-200 0.6 200 30 € 440.-

Rol� lm 3-2-150 2.0 150 3 € 70.-

Rol� lm 10-2-150 2.0 150 10 € 230.-

Rol� lm 20-2-150 2.0 150 20 € 455.-

Rol� lm 30-2-150 2.0 150 30 € 650.-

• easy handling • can be used fl exibly • Prevention of Bending Marks • decrease of post-processing of bent parts • no contamination of the material • increased product quality

Bending Foil: Practical, easy and economic!

Rol� lm 3-0.4-150 0.4 150 3 € 40.-

Rol� lm 10-0.4-150 0.4 150 10 € 120.-

Rol� lm 20-0.4-150 0.4 150 20 € 235.-

Rol� lm 30-0.4-150 0.4 150 30 € 300.-

mark free bending:www.rolleritools.com/videos/mark-free-bending

Rolleri Videos



ROLFILM

www.sm-tech.ro

226 227

11

MPG25 MPG50 MPG75

MPG100

GM 25x25 GM 50x50 GM 75x50

GM 100x50

PSTCON

GMF 25x25x10 GMF 50x50x25

GMF 75x50x20

GMF 100x50x20

60

60

25

25

60155

100

4616

102

6096

96

5020

50

60125

100

4620

77

25

25

25

25ø10

50

50

50

50ø 25

75

50

75

50

45

20

100

50

100

60

5020

A 15

B

A 15

B

C45: 560-710 N/mm2

C45: 560-710 N/mm2 C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

H

B

2






PU-Holders and PU-Upholstery PU-Holders and PU-Upholstery

PU-Upholstery

PU-Holder

groove

groove bar /tail

Also mountable on other press brakes!

PU-Upholstery are suitable for radius- and U-pro� le bendings, etc. Mounting example Model A (mm) R (mm) Price Weight

PSTCON25 58 58 € 27.- 1.2 kg

PSTCON50 108 75 € 32.- 0.6 kg

PSTCON75 123 80 € 34.- 0.8 kg

PSTCON100 153 80 € 38.- 1.0 kg

cover plate

Mounting example

polyurethane polyurethane

polyurethane

polyurethane

polyurethane polyurethane

polyurethane

polyurethane

835 mm € 233.- 18.5 kg

415 mm € 135.- 9.2 kg

835 mm € 57.- 0.6 kg

415 mm € 32.- 0.3 kg

835 mm € 418.- 44.0 kg

415 mm € 236.- 22.0 kg

835 mm € 130.- 2.5 kg

415 mm € 72.- 1.2 kg

835 mm € 182.- 5.0 kg

415 mm € 101.- 2.5 kg

835 mm € 169.- 3.5 kg

415 mm € 94.- 1.7 kg

835 mm € 564.- 46.0 kg

415 mm € 320.- 22.5 kg

835 mm € 656.- 55.0 kg

415 mm € 374.- 27.5 kg

835 mm € 134.- 2.5 kg

415 mm € 74.- 1.2 kg

835 mm € 276.- 3.0 kg

415 mm € 152.- 2.2 kg

835 mm € 255.- 3.5 kg

415 mm € 141.- 1.7 kg

835 mm € 64.- 0.6 kg

415 mm € 35.- 0.3 kg

www.sm-tech.ro

228 229

11

TN80.14

TN80.20

INS14...

INS20... INS20...

60

14

24

7518

15

60

20

35

7518

19

1424

α

V5

20

2035

α

V

524

α

2035

α

V

524

α


1000 kN/m max. 200 kN/m max. 200 kN/m max.

C45: 560-710 N/mm2

C45: 560-710 N/mm2C45: 560-710 N/mm2

C45: 560-710 N/mm2

TN80.30 INS30...

60

3830

507918

3011

19

3038

α

V

1219

31


TMN95.20 1000 kN/m max.

20

95

35

60

20

19

13






Synthetic Dies Synthetic Dies


Mounting example

housing

synthetic die

bolted screws

• easy Handling • faster and easier exchange of plastic dies • prevention of bending marks • decrease of post-processing of bent pieces • no contamination of the materials • increased product quality


Model α V (mm)INS14.06.88 88° 6INS14.08.88 88° 8INS14.10.88 88° 10INS14.06.60 60° 6INS14.08.60 60° 8INS14.10.60 60° 10


Model α V (mm)INS14.06.45 45° 6INS14.08.45 45° 8INS14.10.45 45° 10INS14.06.30 30° 6INS14.08.30 30° 8

Rolleri Type R1

Rolleri Type R1



Model α V (mm)INS30.06.88 88° 6INS30.08.88 88° 8INS30.10.88 88° 10INS30.12.88 88° 12INS30.16.88 88° 16INS30.20.88 88° 20INS30.25.88 88° 25INS30.06.60 60° 6INS30.08.60 60° 8INS30.10.60 60° 10INS30.12.60 60° 12INS30.16.60 60° 16INS30.20.60 60° 20

Model α V (mm)INS30.06.45 45° 6INS30.08.45 45° 8INS30.10.45 45° 10INS30.12.45 45° 12INS30.16.45 45° 16INS30.20.45 45° 20INS30.06.30 30° 6INS30.08.30 30° 8INS30.10.30 30° 10INS30.12.30 30° 12INS30.16.30 30° 16


Rolleri Type R1

Rolleri Type R2/R3


835 mm € 286.- 15.0 kg

415 mm € 157.- 7.5 kg

835 mm € 286.- 19.0 kg

415 mm € 157.- 9.5 kg

835 mm € 145.- 0.40 kg

415 mm € 83.- 0.20 kg

835 mm € 145.- 0.40 kg

415 mm € 83.- 0.20 kg

835 mm € 132.- 0.30 kg

415 mm € 77.- 0.15 kg

835 mm € 286.- 25.0 kg

415 mm € 157.- 12.5 kg

835 mm € 145.- 0.50 kg

415 mm € 82.- 0.25 kg

835 mm € 360.- 12.0 kg

415 mm € 200.- 6.0 kg

www.sm-tech.ro

12

ROLLERI SPECIAL AND HEAVY DUTY TOOLSExplanation of Special Tools 232

Explanation of Heavy Duty Tools 233

Heavy Duty Tools 234 - 235

Examples of Special Tools 236 - 238

Dies with Rollers 239 - 241

ROL6-System 242

Panelling Tools 242

BLACKFIRE 243

www.sm-tech.ro

232 233

12

ROLLERI SPECIAL AND HEAVY DUTY TOOLS ROLLERI SPECIAL AND HEAVY DUTY TOOLS





Special Solutions Solutions for heavy tasks

The bending of materials with extreme high resistance, (Hardox, Weldox, etc.), has developed into an important task.

The Heavy Duty tools of Rolleri are built and � nished for these challenges.

Tools that have a press force up to 4000 kN/m, o� er you many production possibility.

Our many years of experience in the area of special and heavy duty tooling, along with our own developing department, guarantee you functional and economic solutions in the bending sector.

From the compatible tang to the punch onto the compat-ible die; we manufacture everything in our own produc-tion facilities.

Take advantage of the direct contact to the manufacturer and the bene� ts which come along with it.






1.2767 830 N/mm2 22 - 25 HRC 54 - 60 HRC


Contact us now!

We are here to help you!

• in-house construction and production (no reseller or dealer) • competent consulting • client specifi c developments• tracking of every tool possible, with a unique serial number on every article after the quality control check • precision grinding (tolerance of +/-0.01mm)• guaranteed tool reproduction• exact parallelism • bending tests upon request

• Z-Profi les • Hat-Profi les• Trapezoidal Profi les• Pressed contours • Foldings • Hinges• Radii • Beads• Special Profi les • etc.


Special Tooling for:

Material


www.sm-tech.ro

234 235

12

RHD.500-200 2000 kN/m max.RHD.300

RHDP.60

RHD.300 HYD

300

50

10

120

40

50

40 40

300

50

8

120

30

45

500

50

10

120

50

40

4000 kN/m max.

42Cr: 900-1150 N/mm2 1.2767: 830 N/mm2

1.2767: 830 N/mm2 1.2767: 830 N/mm2

H44

9

2522

60°

W

R

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm22500 kN/m max. 2500 kN/m max.


2500 kN/m max.






Heavy Duty Tools Heavy Duty Tools

More Tools for Heavy Duty operations can be found on pages 156-158

RHD.300-250

500 mm Price upon request 122.0 kg

RHD.300-250 HYD



RHD.300-400


RHD.300-400 HYD


NEW NEW NEW

NEW

Model H (mm)

W (mm) R Price Weight

RHDP.60.20-250 96 110 20 upon requestRHDP.60.25-250 96 110 25 upon requestRHDP.60.30-250 96 110 30 upon requestRHDP.60.40-250 96 110 40 upon requestRHDP.60.50-250 96 110 50 upon requestRHDP.60.60-250 96 110 60 upon requestRHDP.60.70-250 86 140 70 upon requestRHDP.60.80-250 86 150 80 upon requestRHDP.60.90-250 86 165 90 upon requestRHDP.60.100-250 86 185 100 upon request

Model H (mm)

W (mm) R Price Weight

RHDP.60.20-400 96 110 20 upon requestRHDP.60.25-400 96 110 25 upon requestRHDP.60.30-400 96 110 30 upon requestRHDP.60.40-400 96 110 40 upon requestRHDP.60.50-400 96 110 50 upon requestRHDP.60.60-400 96 110 60 upon requestRHDP.60.70-400 86 140 70 upon requestRHDP.60.80-400 86 150 80 upon requestRHDP.60.90-400 86 165 90 upon requestRHDP.60.100-400 86 185 100 upon request

500 mm see tables

www.sm-tech.ro

236 237

12

SPE1

SPE5

SPE3 SPE4

SPE-P1

SPE-P2

SPE2

SPE6

SPE-P3

SPE-P4

SPE9

CBS

A

BS

BSC

AD

BS

CD

A

H

R

α

H

R

α

R

H

α

ø

S

ø

S

220

30

SPE7 SPE-X

A

A






Tool examples

Hat-Pro� les

Trapezoidal Pro� les

Z-Pro� les

Hinges

Front- and Hemming Tool (Foldings)

www.sm-tech.ro

238 239

12

MR90

A10

A13

MR130

A11

60

20

13

20

12,77

19

C

V

130

B

78°

C

V

90 B

78°






Dies with Rollers Tool examples

Special Pro� les

Radii Pressing

Model V (mm) B (mm) C (mm) Length Price Weight

MR90.20.78 20 45 6 835 mm on request 15.0 kg







Model V (mm) B (mm) C (mm) Length Price Weight












Rollen: C53.60-62 HRC Rollen: C53.60-62 HRC

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

www.sm-tech.ro

240 241

12

13

240

320

420

250

30

R 8080°

MR170.200.80

MR200.250.80

MR250.320.802000 kN/m max.

2000 kN/m max.

2000 kN/m max.

AD MR60

60

26,5

13

20

13

150

200

290

170

25

R 4080°

13

200

250

350

200

30

R 6080°

42Cr: 900-1150 N/mm2

42Cr: 900-1150 N/mm2 42Cr: 900-1150 N/mm2

AD MR55

AD MR12.7

AD MR13

AD MR35

27

13

55

48,5

13

42

35

51,5

13

45

12,7

727

13

20

C45: 560-710 N/mm2 C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2

C45: 560-710 N/mm2






Dies with Rollers Dies with Rollers

• increase in wear resistance through rollers • induction hardened rollers (approx. 60 HRc) • decrease in bending marks • decrease in press force• easy and economic exchange of rollers

NEW

NEWNEW

NEWNEW

NEW

NEW

NEW

Adapter for Rolleri Type R1

Adapter for Rolleri Type RX EHT

Adapter for Rolleri Type RX LVD

Adapter for Rolleri Type R2/R3

Adapter for Rolleri Type RX Weinbrenner

Take advantage of our dies with rollers with means of groove bars/tails to use on other press brake machines.

Our Advantages – Your Convenience98 mm € 76.-

98 mm € 105.-

98 mm € 53.-

98 mm € 34.-

98 mm € 76.-

100 mm € 593.- 19.0 kg 100 mm € 804.- 42.0 kg

100 mm € 684.- 28.0 kg

www.sm-tech.ro

242 243

12

ROL642Cr: 900-1150 N/mm2






• various V-Openings: 40-360 mm• Instructions: - secured manually with steering wheel - driven by gear motor or - CNC-system

While using the manual version, the opening is set in place by a turn of the stearing wheel, or with a gear re-duction which is attached to the die. The automatic version, on the other hand, is operated by a control panel. The standard system does not come with the CNC-Connection for the press brake. It is available upon request at an additional cost. The base of the ROL6-system is 720 mm wide, but can also be � tted onto narrow designed tables. There is a adapter available in order to secure the system onto a table with a width of 400 mm. The inserts in the opening radius are exchangeable. The standard version comes with an opening radius of R=10 mm. Die weight: approx. 1 ton/m

Application of various dies ROL6: www.rolleritools.com/videos/rol6

Rolleri Videos

bending angle kN/m max.

0° 6000

90° 6000

60° 4000

ROL6-System BLACKFIRE

Rolleri BLACKFIRE is a particular coating of your tools which de� nes itself by its increased corrosion resistance and special design. The chemical treatment permanently solves the problem of oxidation. The top surface of the metals changes through the phos-phate process. It builds phosphate-like crystals, that attach themselves chemically on the substance. This improves the durability of the surface against corrosion. Your equipment will have a long-term lifecycle left un-changed. The glossy black color of BLACKFIRE is compat-ible with the new technology and that allows a unique and esthetic look which connects well with the advantages of it. You can have the BLACKFIRE treatment on all standard tools with a surcharge of 30%. Please note that the delivery times vary by a BLACKFIRE Treatment.

• in-house construction (no reseller or dealer) • production according to your specifi cations• tracking of every tool possible, with a unique serial number on every article after the quality control check. • precision grinding (tolerance of +/-0.01 mm)• exact parallelism • use of the best materials, guaranteed high resistance and tensile strength

• no corrosion • better gliding by the exchange of tools• appealing design • long-life cycle

Panelling Tools



The Unique Coating Our Advantages – Your Convenience

www.sm-tech.ro

13

ROLLERI SERVICES / MODIFICATIONS Our Production Department 246 - 247

Modi� ed Tangs 248 - 249

Special Sectioning 250

Horn Pieces 250

Modifying the V-Opening 250

Radius and Angle Modi� cation 251

Grooves for Dies 251

Grooves and Groove Bars/Tails for Dies 252

Gaps and Windows 253

www.sm-tech.ro

246 247

13

ROLLERI SERVICES ROLLERI SERVICES





Our Production Department Our Production Department

With our state-of-the-art milling centers we can do your modi� cation requests fast, precise and with high-quality.

Swivel milling heads with high swivel range allows � exible and universal production.

This is where, grooves, gaps, and openings are created.

Our comprehensive machinery with state-of-the-art technology ensures you the highest quality in tools.

In addition to the manufactured standard and special tools, we perform all modi� cations individually according to your requirements.

Take advantage the modi� cations to reduce costs and increase the productivity of your existing tools!

After the laser marking, tracking of every tool is possible with a unique serial number on every article. Therefore the tracking of your tools is guaranteed and a new productions with the exact same measurements (angle, radius, hardening, etc.) is possible. This step is happens after quality control.

Individual markings are upon request possible.

Our CNC-Professional grinding machines guarantee, highest precision ground (tolerance of +/-0.01 mm), accurate parallelism and repeatability.

Here you can also retro� t induction hardened and core hardened tool pieces. Radius and angle modi� cations are precisely grounded after your measurements.

By using EDM wire, hardened and very tough material can be retro� tted. The process is operated based on a CAD-system which can also process high dimensions such as special shapes.

The surface areas of the tools are exposed to the highest mechanical stress. Due to the fact that, the whole press force of the press brake machine is focused on small surface of the sheet metal. Therefore the stress is very high on these surfaces. During the bending process of the sheet metal, friction occurs.

For more resistance strength the hardening of the surfaces can be increased. The depth of the hardening must be at least 3 mm to avoid deformations. We use the electromagnetic technique also known as induction hardening to the best quality for your money‘s worth.

Our Machine Park

CNC-Milling

CNC-Pro� le Grinding

Quality Control and Laser Marking

Hardening

EDM Wire

www.sm-tech.ro

248 249

13

A1

A7

A42

A6

OT

A8 A41

A43

13

10

7

2,5

30°

3,5

3022

13 8,4

13

14

7

43,5

630

13 8,4

13

14

7

43,5

6

30

13 8,4 25

13 7

45°

4

30

105

15

13

14

74

6

30

13

14

74

6

3025

13

14,5

10

74,5

30

13 73,5

30

13 8,4

20

58,

5

204

86

H

153

125

H

12

45

20

11

1414

41

20

11

1014

45

20

11

919

13 79°

30

13 8,4

ROLLERI MODIFICATIONS ROLLERI MODIFICATIONS





… for standard tangs … for standard tangs

• Rolleri Punches Type R1, R2, and R3 can be used on other press brake machines by modifying the tang.

• Precision ground (Tolerance of +/-0.01 mm)• exact parallelism• fast, economic, precise

Standard Rolleri Type R1 Standard Rolleri Type R2

Fast delivery on these items guaranteed. Please note that delivery terms vary according to your location.

Groove in addition to 8.4 x 3.5 mmgroove for: • pneumatic clamping system

Groove in addition to 8.4 x 3.5 mm groove and shortened tang for:

• Rolleri Type R3• Bystronic-Beyeler Euro• Safan

older clamping system

Groove in addition to 8.4 x 3.5 mm groove for:• Rolleri Type R3• Bystronic-Beyeler Euro• Safan

Modi� cation for:• for Amada fast clamping system

Groove Bar/Tail for:• hydraulic clamping system Gasparini

older clamping system

Groove with steel bar for: • segmented punches

835 mm € 31.-

415 mm € 17.-805 mmsegmented € 31.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

835 mm € 30.-

415 mm € 20.-805 mmsegmented € 50.-

Modi� ed Tangs

chamfer

production according to your speci� cations




Modi� cation examples Type R2

Modi� cation examples Type R3

Standard Rolleri Type R3

Take advantage of your existing tools with means of modi� cations.

www.sm-tech.ro

250 251

13

445

135245

55

835

600

230 5

835

B

Rα

H

B

Rα

H

R

BR

H

R 1,2

88° 80°

R 3,0

60°R 3

60°R 1

R 1,2

88°

R 3,0

88°

60°R 1

55°R 1

R 1,210 R 1,211

A28 A29

6

15

H

B






Special Sectioning Radius and Angle Modi� cations

• Individual sectioning of your punches and dies • fast, economic, precise

Pro separation cutting causes a decrease in length of approx. 5 mm

• Individual modifi cations of your punches and dies • fast, economic, precise

Example of punchesproduction according to your speci� cations

Radii modifi cation Punch exampleproduction according to your speci� cations

Example of Dies production according to your speci� cations

Opening Radius modifi cation die exampleproduction according to your speci� cations

Special Sectioning of Punches Radius Modi� cations for PunchesSpecial Sectioning of Dies Radius Modi� cations for Diesper piece Price upon request per piece Price upon requestper piece Price upon request per piece Price upon request

• individual horn pieces on punches and dies • on one or both sides • fast, economic, precise

Horn PiecesAngle modi� cation punch example production according to your speci� cations

Punch example production according to your speci� cations

Die example production according to your speci� cations

Angle modi� cation die example production according to your speci� cations

Angle Modi� cation Punches

Horn Pieces for Punches Horn Pieces for Dies

Angle Modi� cation Diesper piece Price upon request

per piece Price upon request per piece Price upon request

per piece Price upon request

• individual modifi cation for dies • fast, economic, precise

Modifying the V-Opening

Exampleproduction according to your speci� cations

Modifying the V-Openingper piece Price upon request Give us a call for

more information!

before

before

before

before

after

after

after

after

• Milling of grooves for use on other press brake systems • fast, economic, precise

milled groove

Die Rolleri Type R1

Die holder

Mounting example

Groove for die holder groove productionaccording to your speci� cations

835 mm € 50.-

415 mm € 30.-805 mmsegmented € 70.-

835 mm € 50.-

415 mm € 30.-805 mmsegmented € 70.-

Grooves for Dies

beforebefore

Fast delivery on these items guaranteed. Please note that delivery terms vary according to your location.

www.sm-tech.ro

252 253

13

A30 A31

A45

A44

AX

20

10

13

4510

55

4510

35

19

10

127

H

B

A32

19

10

12,77

60






• For milling of the groove and the insert of a ground groove bar/tail the exact measurement is needed to use on other press brake systems

• fast, economic, precise

Milled groove

Die Rolleri Type R1

Groove Bar/Tail

Mounting example

Groove Bars/Tails: 13 x 30 mm for• Rolleri Type R2• Rolleri Type R3

Groove Bars/Tails: 12 x 29 mm for• Rolleri Type RX LVD

Groove Bars/Tails: 35 x 55 mm for• Rolleri Type RX Weinbrenner

Groove Bars/Tails: 55 x 55 mm for• Rolleri Type RX EHT

individual Groove Bars/Tails for other systems

835 mm € 60.-

415 mm € 40.-805 mmsegmented € 180.-

835 mm € 168,-

415 mm € 95,-805 mmsegmented € 264,-

835 mm € 120.-

415 mm € 75.-805 mmsegmented € 290.-

835 mm € 145.-

415 mm € 89.-805 mmsegmented € 320.-

835 mm Price upon

request415 mm805 mmsegmented

Groove Bars/Tails: 12.7 x 29 mm for• Rolleri Type RX LVD

835 mm € 168,-

415 mm € 95,-805 mmsegmented € 264,-

Grooves und Groove Bars/Tails for Dies Gaps and Windows

• The retrofi tting of the tool edges of long parts, short U-pro� les and similar

• fast, economic, precise

Example Punchesproduction according to your speci� cations

Example Punchesproduction according to your speci� cations

Example Diesproduction according to your speci� cations

Gaps on Punches

Windows for Punches

Gaps on Dies per piece Price upon request



For Rolleri BLACKFIRE see page 243

B

H

www.sm-tech.ro

14

ROLLERI SHEAR BLADES AND ACCESSORIESTooling Cabinets 256 - 257

Tool Trolley 258

Bending Box 258

Squaring Arms 259

Supporting Arms 260

Back Gauge 260

Shear Blades 260 - 261

www.sm-tech.ro

256 25714

ARM 835-4

ARM 1060-4 / -CV

ARM 1060-4-T / -CV

ARM 835-5

ARM 1060-5 / -CV

ARM 1060-5-T / -CV

L

A

B

L L

AB

L

B

ROLLERI ACCESSORIES ROLLERI ACCESSORIES





Tooling Cabinets Tool Cabinets

• Protection against contamination and damage• Faster access• Robust construction• Clear and tidy storage • Cabinet doors specially designed for lift trucks and truck• Adjustable height, zinc-plated shelves

Tool storage demonstration at:www.rolleritools.com/videos/tooling-cabinets

Rolleri Videos

for max. tool length = 835 mm for max. tool length = 835 mm

850 x 1240 x 1050 (W x H x D) 1040 x 1240 x 1050 (W x H x D)

for Tools Rolleri Type R1approx. 20 m Storage capacity

for Tools Rolleri Type R1approx. 25 m Storage capacity

Equipment

4 Drawers vertical, on wheels (see CS-1)16 Shelves for type R1 with 13 mm tangs (see shelves UC-13-1)4 Shelves for type R1 with 13 mm tangs (see shelves UL-13-3)Price € 1,835.- Weight 271.0 kg

Equipment ARM 1060-44 Drawers vertical, on wheels (see CS-2)16 Shelves for type R2/R3 with 20 mm tangs (see shelves UC-20-2)4 Shelves for type R2/R3 with 20 mm tangs (see shelves UL-20-4)Price € 2,524.- Weight 340.0 kg

Equipment ARM 1060-55 Drawers vertical, on wheels (see CS-2)20 Shelves for type R2/R3 with 20 mm tangs (see shelves UC-20-2)5 Shelves for type R2/R3 with 20 mm tangs (see shelves UL-20-4)Price € 2,904.- Weight 400.0 kg

Equipment ARM 1060-4-CV4 Drawers vertical, on wheels (see CS-2), incl. 2 Drawers with separators (see CV)20 Shelves for type R2/R3 with 20 mm tangs (see shelves UC-20-1)10 Shelves for type R2/R3 with 20 mm tangs (see shelves UL-20-4)Price € 2,827.- Weight 351.0 kg

Equipment ARM 1060-5-CV5 Drawers vertical, on wheels (see CS-2), incl. 3 Drawers with separators (see CV)30 Shelves for type R2/R3 with 20 mm tangs (see shelves UC-20-1)10 Shelves for type R2/R3 with 20 mm tangs (see shelves UL-20-4)Price € 3,459.- Weight 490.0 kg

Equipment

5 Drawers vertical, on wheels (see CS-1)20 Shelves for type R1 with 13 mm tangs (see shelves UC-13-1)5 Shelves for type R1 with 13 mm tangs (see shelves UL-13-3)Price € 1,987.- Weight 350.0 kg


1040 x 1240 x 1360 (W x H x D)850 x 1240 x 1360 (W x H x D)

for Tools Rolleri Type R2/R3approx. 26 m / 39 m Storage capacity

for Tools Rolleri Type R2/R3approx. 32.5 m / 52 m Storage capacity


Equipment ARM 1060-4-T4 Drawers vertical, on wheels (see CS-2)8 Shelves for type R2/R3 with 13 mm tangs (see shelves UL-13-4)8 Shelves for type R2/R3 (see shelves UT-4)Price € 2,211.- Weight 383.0 kg

Equipment ARM 1060-5-T5 Drawers vertical, on wheels (see CS-2)10 Shelves for type R2/R3 with 13 mm tangs (see shelves UL-13-4)10 Shelves for type R2/R3 (see shelves UT-4)Price € 2,496.- Weight 447.0 kg

Equipment ARM 1060-4-T-CV4 Drawers vertical, on wheels (see CS-2), incl. 2 Drawers with separators (see CV)16 Shelves for type R2/R3 with 13 mm tangs (see shelves UC-13-1)8 Shelves for type R2/R3 (see shelves UT-4)Price € 2,794.- Weight 360.0 kg

Equipment ARM 1060-5-T-CV5 Drawers vertical, on wheels (see CS-2), incl. 3 Drawers with separators (see CV)24 Shelves for type R2/R3 with 13 mm tangs (see shelves UC-13-1)8 Shelves for type R2/R3 (see shelves UT-4)Price € 3,384.- Weight 500.0 kg


1040 x 1240 x 1360 (W x H x D)850 x 1240 x 1360 (W x H x D)

CS-DrawersModel T (mm) L (mm) Price WeightCS-1 1050 856 € 108.- 22.0 kgCS-2 1360 1166 € 120.- 25.0 kg

CV-DrawersModel T (mm) A (mm) B (mm) Price WeightCV-1 1050 580 270 € 54.- 7.0 kgCV-2 1360 580 580 € 54.- 7.0 kg

UC-Shelves

UT-Shelves

UL-Shelves

UV-Shelves

Model L (mm)

A (mm)

B (mm) Price Weight

UC-13-1 125 13 76 € 47.- 0.5 kgUC-13-2 250 13 232 € 68.- 1.0 kgUC-20-1 125 20 76 € 47.- 0.5 kgUC-20-2 250 20 232 € 68.- 1.0 kg

Model L (mm) B (mm) Price WeightUL-13-1 270 13 € 47.- 1.2 kgUL-13-2 580 13 € 47.- 2.5 kgUL-13-3 1050 13 € 47.- 4.6 kgUL-13-4 1360 13 € 47.- 6.0 kgUL-20-1 270 20 € 47.- 1.4 kgUL-20-2 580 20 € 47.- 3.2 kgUL-20-3 1050 20 € 47.- 5.8 kgUL-20-4 1360 20 € 47.- 7.5 kg

Model L (mm) Price WeightUT-1 270 € 67.- 1.4 kgUT-2 580 € 67.- 3.2 kgUT-3 1050 € 67.- 5.8 kgUT-4 1360 € 67.- 7.5 kg

Model L (mm) Price WeightUV-1 270 € 36.- 1.0 kgUV-2 580 € 36.- 2.0 kgUV-3 1050 € 36.- 4.3 kgUV-4 1360 € 36.- 5.5 kg

2 pieces

enough room for punches with safety pins

for tools Rolleri Type R2/R3approx. 20.8 m / 31.2 m Storage capacity

for tools Rolleri Type R2/R3approx. 26 m / 41.6 m Storage capacity

T T

www.sm-tech.ro

258 25914

AS

H=1520

ROLLERI ACCESSORIES ROLLERI ACCESSORIES





Squaring Arms Tool Trolley


• easy and fast securing • percise and fl exible adjustability • adjustable angle stop • mountable on all dies • ideal for long, and thin sheet metals

MSA.D (right) per piece € 225.- 1.4 kg

MSA.S (left) per piece € 225.- 1.4 kg

MSA – magnetic


• faster access

• robust construction

• clear and tidy storage

• visibility of tools

Tool Trolleys Model Content Tool System Price Weight

A Trolley 30 Shelves for R1 tools € 1,157.- 108.0 kg

T Trolley 21 Shelves for R2 tools € 1,389.- 175.0 kg

B Trolley 21 Shelves for R3 tools € 1,350.- 135.0 kg

Secure storage and mobility:www.rolleritools.com/videos/tool-trolley

Rolleri Videos

Magnetic Squaring Arms :www.rolleritools.com/videos/squaring-arms

Rolleri Videos


Give us a call for more information!

Bending Boxper piece € 199.- 1.6 kg

Bending Box

D=1160

W=1060

www.sm-tech.ro

26114

260

αα

α

α

α

α

ROLLERI SHEAR BLADES




Article on stock

ROLLERI ACCESSORIES


Shear Blades Supporting Arms and Back Gauge


• own production

• custom production

• depending on the cutting material

• high quality Materials

• 4-, 2- or 1-sharp

• with threaded holes or bilateral reduction

• hardened according to your specifi cations and request

Model Length (mm) Price Weight

RIF500 500 € 696.- 7.0 kg

RIF1000 1000 € 819.- 12.0 kg

RIF1500 1500 € 993.- 17.0 kg

Model Price Weight

RP500A € 2,295.- 8.0 kg

RP500B € 2,295.- 8.0 kg

• for secure support for high volume sheet metals • greater surface guarantees a trouble-free support for sheet metals• easy handling

• ensures for the correct posistioning of tools on the press brake and secures herewith the exact border distance.

• fast and exact repeatability • easy handling

RP-Back Gauge RIF-Supporting Arm

AS FIX

We manufacture in our company over more than 20 years shear blades.High-quality steels are fi nished according to your specifi cations.

Please provide us with the following information:

• What material are you cutting with your machines: Steel, Stainless Steel, Aluminium, etc.

• How thick is the material in diameter?

• How often do you use your cutting machine?(per hour, day, week)

• How many upper and lower shear blades are needed?

Shear Blades

New production and retro� tting service: fast, economic, precise!

4-sharp 2-sharp 1-sharp

available sizes

70 x 13 75 x 15 80 x 16 85 x 18 90 x 20 100 x 20

70 x 14 75 x 16 80 x 18 85 x 19 90 x 21 100 x 22

70 x 15 75 x 17 80 x 19 85 x 20 90 x 22 100 x 25

70 x 16 75 x 18 80 x 20 85 x 21 90 x 23 100 x 26

70 x 17 75 x 19 80 x 21 85 x 22 90 x 24 100 x 27

70 x 18 75 x 20 80 x 22 85 x 23 90 x 25 100 x 28

70 x 19 75 x 21 80 x 23 85 x 24 100 x 29

70 x 20 75 x 22 80 x 24 85 x 25 100 x 30

75 x 23 80 x 25

75 x 24

75 x 25

available sizes

50 x 10 55 x 12 60 x 12 65 x 13

50 x 11 55 x 13 60 x 13 65 x 14

50 x 12 55 x 14 60 x 14 65 x 15

50 x 13 55 x 15 60 x 15 65 x 16

50 x 14 55 x 16 60 x 16 65 x 17

50 x 15 55 x 17 60 x 17 65 x 18

55 x 18 60 x 18 65 x 19

55 x 19 60 x 19 65 x 20

55 x 20 60 x 20per piece € 189.- 3.0 kg

www.sm-tech.ro

262 263

ROLLERI

90°

RiS

V

B


The press force table is based on the press force caliper and is very useful to those who deal with sheet metal pro� les. It can assist you from the projection of pro� les, to technical construction, to the buying of tools, and to the � nished pro� le from the press brake machine.

In the � rst left column the thickness of the sheet metal is noted as (S). In the three � rst lines you can � nd the die width (V), the minimum boarder (B), and the ideal inner pro� le radius (Ri).

By crossing the thickness with the die width, you will � nd the necessary press force per meter. Furthermore, depicted are the span of 5 di� erent die widths. The cor-rection factors are found below in the table.

Press Force Table

Professional Bending

S = Thickness

V = Die Width

B = Min. Boarder

Ri = Inner Pro� le Radius

Copyright: The use of Rolleri Publications and national adoptions of Rolleri Publications is subject to the user‘s acceptance of Rolleri‘s terms of use and conditions of copyright for Rolleri publications, as set out below.

All Rolleri Publications and national adoptions thereof are protected by copyright. Therefore and unless otherwise speci� ed, no part of an Rolleri Publication or a national adoption thereof may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, micro� lm, and scanning, without permission in writing from the publisher.

Visit us on our website and take advantage of our enormous onlineshop:

• shop online 24/7

• drawings 1:1 format available

• extra information and tips

• helpful videos and application examples

• easy website browsing

www.rolleritools.com

420 N/mm2

S(mm)

4 5 6 8 10 12 16 20 25 32 40 50 63 80 100 125 160 200 250 V

3.0 3.5 4.0 5.5 6.5 8.0 10.5 13.0 16.5 21.0 26.0 32.5 41.0 52.0 65.0 81.5 104.0 130.0 163.0 B

0,5 0,7 0,8 1,0 1,3 1,5 2,0 2,5 3,2 4,4 5,0 6,5 8,0 10,0 12,0 15,0 20,0 25,0 37,0 Ri

0.6 60 50 30 20

F kN/m

0.8 120 90 70 50 40

1.0 150 110 80 60 50

1.2 180 120 90 70 50

1.5 210 150 120 80 60

2.0 300 230 160 120 90

2.5 390 270 200 140 110

3.0 430 310 230 160 120

4.0 600 440 320 230 180

5.0 760 540 390 290 220

6.0 850 620 450 330 250

8.0 1210 880 700 460 350

10.0 1510 1090 790 580 440

12.0 1730 1240 910 660 500

15.0 2130 1550 1130 810 620

20.0 3020 2200 1580 1150 890

25.0 3780 2690 1970 1440

30° B x 1.6 R=200 N/mm2 r x 0.8 Al

60° B x 1.1

90° B x 1.0 R=420 N/mm2 r x 1.0 Fe

120° B x 0.9

150° B x 0.7 R=700 N/mm2 r x 1.4 INOX

INOX – stainless steel R 700 N/mm2 Ton x 1.7AL – aluminium R 200 N/mm2 Ton x 0.5(R = tensile strength)

ww

w.s

m-te

ch.ro

ww

w.r

olle

rito

ols.

com

Rolleri S.p.A.Via Artigiani Cabina · 29020 Vigolzone (PC) – ItaliaTel. +39 05 23 87 09 05Fax +39 05 23 87 90 30E-Mail [email protected] www.rolleri.it

ww

w.r

olle

rito

ols.

com

www.rolleri.ro

SCULE SI ACCESORII PENTRU ABKANT

Distribuitor:

S.C. SM TECH SRL

Tel: 0040-331-401599

Tel Mob: 0040-745-528494 Tel/Fax: 0040-231-515702

E-mail: office (at) sm-tech.ro www.sm-tech.ro www.rolleri.ro www.abkant.ro

Documents

Rolleri scule abkant - press brake tooling catalogue SM.pdf