Embed Size (px)
Citation preview
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 250V 5x20 CC RAD FA PB-FREE 1.6A
Product Number: 021601.6MXR24P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER
ICP-0081 091251 FUSED SILICA
ICP-1432 082462 WIRE
ICP-0088 909-455 CERAMIC BODY
ICP-0158 425631 HF INK-ORANGE
ICP-0163 425645 HF INK ADDITIVE
ICP-0059 934-090 PIGTAIL
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Diana Jane D. Gabinete
Environmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5X20 FA HBC T&R PB-FREE 1A
Product Number: 0216001.MRET5LP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0059 934-077 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 BODY
ICP-0081 091251 FUSED SILICA
ICP-1432 082558 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Diana Jane D. Gabinete
Environmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5X20MM H PACK (P)Product Number: 0216.050HXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 C910510 CAP
ICP-0078 692529 SOLDER
ICP-0071 909532 BODY
ICP-0083 087355 GLUE *ICP-0089 497550 WIRE
Remarks
To view the third party RoHS validation report of these materials, see download procedure below.
1 O th FTP b it i d l ft // bft litt lf /ICP T t R t /
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Diana Jane D. GabineteEnvironmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 F HBC 10A/250V (P)
Product Number: 0216010.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 CAP
ICP-0058 WIRE SOLDER
ICP-0088 CERAMIC BODY
ICP-0081 Fused silica
ICP-1432 ELEMENT- Ag Plated Cu
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Jennilyn R. Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
091251
082549A
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in
compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials
wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
910-556
692539-002
909-455
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 F HBC 6.3A/250V Pb-free
Product Number: 021606.3MXHP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material
Part NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER
ICP-0088 909-455 CERAMIC BODY
ICP-0081 091251 FUSED SILICA
ICP-1432 082547A ELEMENT
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jennilyn R. Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance
with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein
valid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 250V 5x20 FA HBC PT PB-FREE 3.15A
Product Number: 02163.15MXGP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material
Part NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER
ICP-0081 091251 Fused silica
ICP-1432 082324 WIRE
ICP-0088 909-455 CERAMIC BODY
ICP-0062 425900 INK - ORANGE *
ICP-0067 425906 INK - BROWN *
ICP-0063 425901 INK - RED
ICP-0059 934-077 CAP WITH LEAD
Remarks:
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jennilyn R. Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance
with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein
valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 250mA/250V (P)
Product Number: 0216.250MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material
Part NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0080 030204 PIGTAIL
ICP-0070 C910510 CAP
ICP-0078 692529 SOLDER
ICP-0071 909532 BODY
ICP-0083 087355 GLUE *
ICP-1481 497560 WIRE
ICP-0081 091250 FILLER
Remarks:
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jennilyn R. Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in
compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials
wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 F HBC 3.15A/250V (P)
Product Number: 02163.15MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material
Part NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082324 2% by weight Ag Clad Cu
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Environmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance
with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein
valid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 4A/250V (P)Product Number: 0216004.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 Fused silica
ICP-1432 082545A COPPER，SILVER PLATEDRemarks:
To view the third party RoHS validation report of these materials, see download procedure below.
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Diana Jane De Guzman - GabineteGlobal EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5X20 IEC FA HBC TR PB-FREE 5AProduct Number: 0216005.MRET1P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-099 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER
ICP-0088 909-455 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082546A COPPER，SILVER PLATED
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V FA HBC PT 5X20MM RoHS 12.5AProduct Number: 021612.5MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-556 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 CERAMIC BODY (CHAMFERED)
ICP-0092 091253 SAND
ICP-0091 687196 WIRE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 125mA/250V (P)Product Number: 0216.125MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0080 030204 PIGTAIL
ICP-0070 C910510 CAP
ICP-0078 692529 PB FREE SOLDER FOR DT
ICP-0071 909532 BODY
ICP-0083 087355 GLUE (EP608) *ICP-1481 497556 WIRE
Remarks:
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials whereinvalid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 315mA/250V (P)Product Number: 0216.315MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 C910510 CAP
ICP-0078 692529 PB FREE SOLDER FOR DT
ICP-0071 909532 BODY
ICP-0083 087355 GLUE *ICP-1481 497564 WIRE
ICP-0081 091250 FILLER - QUARTZ SANDRemarks:
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V IEC FA HBC 5x20 PT RoHS 6.3AProduct Number: 021606.3MRET5P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-077 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER
ICP-0088 909-455 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082547A COPPER，SILVER PLATED
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 8A/250V (P)Product Number: 0216008.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-556 5x20 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A COPPER，SILVER PLATED
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V FA HBC PT 5X20MM RoHS 16AProduct Number: 0216016.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-556 5x20 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0092 091253 SAND
ICP-0091 687197 AG WIRE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 1.6A/250V (P)Product Number: 021601.6MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082462 WIRE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 SP CC RAD FA 3.15AProduct Number: 02163.15MXR11SPP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-095 5x20 CAP WITH LEAD
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082324 SILVER-PLATED COPPER WIRE
ICP-0164 425641 HF INK-VIOLET
ICP-0163 425645 HF INK ADDITIVE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 1A/250V (P)Product Number: 0216001.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-077 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082558 WIRE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 6.3A/250V (P)Product Number: 021606.3MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-077 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082547A SILVER-PLATED COPPER WIRE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 CC RAD FA PB-FREE 8AProduct Number: 0216008.MXR9P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-556 5x20 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A SILVER-PLATED COPPER WIRE
ICP-0153 425637 HF INK-GREEN
ICP-0059 934-091 5x20 Pigtail
ICP-0163 425645 HF INK ADDITIVE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 6.3A/250V (P)Product Number: 021606.3MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082547A SILVER-PLATED COPPER WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1 O th FTP b it i d l ft // bft litt lf /ICP T t R t /
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 Single PGT F HBC 5A Product Number: 0216005.MXESPP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 CAP WITH LEAD
ICP-0058 WIRE SOLDER PB FREE
ICP-0088 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 LOCH ALINE SAND
ICP-1432 SILVER-PLATED COPPER WIRE
Remarks:
91251
082546A
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
934-073
692539-002
909-455
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 Single PGT F HBC 6.3AProduct Number: 021606.3MXESPP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0058 WIRE SOLDER PB FREE
ICP-0059 CAP WITH LEAD
ICP-0088 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 LOCH ALINE SAND
ICP-1432 SILVER-PLATED COPPER WIRE
Remarks:
91251
082547A
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
692539-002
934-073
909-455
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 10A/250V (P) Product Number: 0216010.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0058 CAP WITH LEAD
ICP-0059 WIRE SOLDER PB FREE
ICP-0088 5x20 CAP
ICP-0081 BODY
ICP-0056 WIRE
Remarks:
C909543
687254-001
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
934-077
692539-002
910-555
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 CC RAD FA PB-FREE 3.15A Product Number: 02163.15MXR11P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0164 HF INK-VIOLET
ICP-0059 5x20 Pigtail
ICP-0163 HF INK ADDITIVE
ICP-0058 WIRE SOLDER PB FREE
ICP-0052 CAP
ICP-0081 LOCH ALINE SAND
ICP-1432 SILVER-PLATED COPPER WIREICP-0088 5x20 CERAMIC BODY (CHAMFERED)
Remarks:
692539-002
910-553
091251
082324909-455
425645
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
425641
934-090
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 3.15A/250V (P) Product Number: 02163.15MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 CAP WITH LEAD
ICP-0058 SOLDER PB FREE
ICP-0052 CAP
ICP-0081 FILLER
ICP-1432 ELEMENT
ICP-0088 BODY
Remarks:
091251
082324
909-455
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
934-077
692539-002
910-553
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 8A/250V (P)
Product Number: 0216008.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-556 WIRE SOLDER PB FREE
ICP-0058 692539-002 5x20 CAP
ICP-0088 909-455 5x20 CERAMIC BODY
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A SILVER-PLATED COPPER WIRE
Remarks:
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Jennilyn Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in
compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials
wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 2.5A/250V (P) Product Number: 021602.5MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 CAP WITH LEAD
ICP-0052 CAP
ICP-0058 WIRE SOLDER
ICP-0081 FILLER
ICP-1432 ELEMENT
ICP-0088 BODY
Remarks:
091251
082464
909-455
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
934-077
910-553
692539-002
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 Single PGT F HBC 8AProduct Number: 0216008.MXESPP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-075 CAP WITH LEAD
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A SILVER PLATED COPPER WIRE
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V FA HBC 5X20MM RoHS 16AProduct Number: 0216016.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-556 5x20 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0092 091253 SAND
ICP-0091 687197 WIRE
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 4A/250V (P)Product Number: 0216004.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-077 Cap and Lead Assembly
ICP-0070 910-553 Cap
ICP-0058 692539-002 Solder Wire
ICP-0088 909-455 Ceramic Body
ICP-0081 091251 Loch Aline Sand
ICP-1432 082545A Silver-Plated Copper Wire
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 10A/250V (P)Product Number: 0216010.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-556 5x20 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082549A COPPER，SILVER PLATED
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 CC RAD FA PB-FREE 5AProduct Number: 0216005.MXR7P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082546A COPPER，SILVER PLATED
ICP-0159 425632 HF INK-RED
ICP-0059 934-090 5x20 Pigtail
ICP-0163 425645 HF INK ADDITIVE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 5A/250V (P)Product Number: 0216005.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-077 CAP WITH LEAD
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082546A COPPER，SILVER PLATED
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 SP CC RAD FA 8AProduct Number: 0216008.MXR9SPP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 934-096 5x20 CAP WITH LEAD
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY (CHAMFERED)
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A COPPER，SILVER PLATED
ICP-0153 425637 HF INK-GREEN
ICP-0163 425645 HF INK ADDITIVE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V 5x20 CC RAD FA PB-FREE 4AProduct Number: 0216004.MXR6P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 910-553 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0088 909-455 5x20 CERAMIC BODY
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082545A COPPER，SILVER PLATED
ICP-0165 425635 HF INK-BLUE
ICP-0059 934-090 5x20 Pigtail
ICP-0163 425645 HF INK ADDITIVE
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F HBC 630mA/250V (P)Product Number: 0216.630MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 C910510 CAP
ICP-0078 692529 PB FREE SOLDER FOR DT
ICP-0071 909532 BODY
ICP-0083 087355 GLUE (EP608) *ICP-0090 082708 WIRE COPPER
ICP-0081 091250 FILLER - QUARTZ SANDRemarks:
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5x20 PGT F HBC 8A/250V (P)
Product Number: 0216008.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-556 WIRE SOLDER PB FREE
ICP-0058 692539-002 5x20 CAP
ICP-0088 909-455 5x20 CERAMIC BODY
ICP-0081 091251 LOCH ALINE SAND
ICP-1432 082548A SILVER-PLATED COPPER WIRE
Remarks:
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Jennilyn Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in
compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials
wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
For questions and clarifications, you may send an email to [email protected]
