RockSat-C 2011Final Presentation

RockSat-C 2011Team: RocketSat VII

University of Colorado-Boulder

June 22, 2011

Kirstyn Johnson Jared Yenzer

Andrew BroucekJosh Tiras

RockSat-C 2011Final Presentation

Team Overview: RSVII Summer Team

2

From Left to Right:Kirstyn JohnsonProject Manager

Andrew Broucek:Mission

Specialist Lead

Jared YenzerElectrical Engineer

Josh TirasSoftware

RockSat-C 2011Final Presentation

Mission Overview

3

RocketSat VII shall design an attitude determination system for future

RocketSat-C missions

Background: RocketSat VI • Mission required angle of attack of rocket to properly process

science data• Attitude determination system was not successful

• Algorithm chosen required more precise sensors to determine its position in flight

RockSat-C 2011Final Presentation

Design Overview

4

Integrated Stack

Main Boardcontains

gyroscopes and

magnetometer

Optics BoardCMOS sensors to act as sun

sensors

RockSat-C 2011Final Presentation

Expected Results

• Determine the attitude of the rocket during the ascending portion of flight– Need magnetometer data and at least

one picture of the sun

• Have a system that can be easily recreated for future RocketSat projects to use

5

RockSat-C 2011Final Presentation

Lessons Learned

• Don’t overcomplicate your design, but sometime complex systems are needed to meet the requirements

• Always allow more time to complete certain tasks than you believe

• Follow the schedule as much as possible

6

RockSat-C 2011Final Presentation

Conclusions

7

Ready for a Rocket Launch!