ROBUSTRACK - MORE THAN JUST A DISTRIBUTOR

R J HeslopDavide Cerca

Founders Dave and Bobby began importing hydraulic attachments into the UK in 2012.With their Anglo-Italian roots and business contacts they formed Robustrack as a gatewaybetween Italian manufacturing and the UK market.Based in North Yorkshire, with an additional depot in Oldbury, the Robustrack Team nowsupply attachments and excavators worldwide and are renowned for their philosophy ofproviding high quality products with the same high quality of service. With the backing oftwo advanced workshops, Robustrack have added fabrication, breaker inspection andrefurbishment, service, repair work and spare parts to their growing business portfolio.

ROBUSTRACK - MORE THAN JUST A DISTRIBUTORQUALITY ITALIAN EXCAVATORS AND ATTACHMENTS

MICRO/MINI EXCAVATOR 1.2T - 3T

LS1 - LS2 RANGE

3 - LS1/LS2 FLAIL MOWER RANGE

Protective rubber guardAnti-cavitation/flow control: a system that stops any spike inpressure/sudden stoppage from damaging the excavator/motorAdjustable rear roller with 3 cutting positions (only LS2 Series)No drain line requiredY or hammer blades

Bracket with welded or removable pinsFloating bracket adaptorProtective chain guardPipes30° or 45° adaptor to cut hedges in narrow passages

Supplied with:

Optional:

Compact and strong yet light, the LS1 and LS2 flail mowers are theperfect solution for hedge cutting and ground clearing with smallmachines, suitable for grass, brambles and hedges up to 2cm indiameter.

FLAIL MOWERS

MODEL LS1 600 LS1 800 LS2 600 LS2 800

DIGGER SIZE

CUT WIDTH (MM)

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

1.2 - 2.5 1.2 - 2.5 2 - 3 2 - 3

600 800 600 800

85 95 97 107

20 - 30 20 - 30 20 - 30 - 50 20 - 30 - 50

200 200 200 200

DIRECT DIRECT DIRECT DIRECT

80 - 65 - 55 100 - 65 - 55 80 - 65 - 55 100 - 65 - 55

By far our most popular flail, the LS3 is ideal for cutting hedges, brambles, grassand branches up to 5cm in diameter, for those with excavators between 2 and 6Ton.

MINI/MID EXCAVATOR 2T - 6T

LS3 RANGE

4 - LS3 FLAIL MOWER RANGE

Protective rubber guardAnti-cavitation/flow control: a system that stops any spike in pressure/suddenstoppage from damaging the excavator/motor.Adjustable rear roller with 3 cutting positionsNo drain line requiredY or hammer blades


Supplied with:

Optional:

FLAIL MOWERS

MODEL LS3 600 LS3 800 LS3 1000

DIGGER SIZE

CUT WIDTH (MM)

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

2 - 4 2 - 4 4 - 6

600 800 1000

130 150 190

20 - 30 - 40 30 - 40 40 - 60

200 200 200

DIRECT DIRECT DIRECT

95 - 65 - 55 115 - 65 - 55 130 - 65 - 55


5 - LS4 FLAIL/MULCHER RANGE

LS4 RANGE

Protective rubber guardAnti-cavitation/flow control: a system that stops any spike in pressure/suddenstoppage from damaging the excavator/motorAdjustable rear roller with 3 cutting positionsNo drain line requiredY or hammer blades


There are 2 versions of the LS4 depending of the size of the excavator. For a 5-6 Tonexcavator we recommend the LS4-1000 and for 7-8 Ton the LS4-1200. Both can besupplied with Y blades or heavy duty hammers. Suitable for cutting grass, bramblesand hedges up to Ø 10 cm.

Supplied with:

Optional:

FLAIL MULCHERS

MODEL LS4 1000 LS4 1200

DIGGER SIZE

CUT WIDTH (MM)

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

5 - 8 5 - 8

1000 1200

220 250

50 - 65 - 80 50 - 65 - 80

200 200

DIRECT DIRECT

125 - 75 - 50 145 - 75 - 50

Protective chain guard on both sidesAnti-cavitation/flow control: a system that stops any spike in pressure/sudden stoppage fromdamaging the excavator/motorNo drain line requiredHammer blades/forestry rotor

Bracket with welded or removable pinsFloating bracket adaptorPipes30° or 45° adaptor to cut hedges in narrow passage

Available with cutting width options of 600mm, 800mm and 1000mm. Suitable for cutting grass,brambles and hedges up to 10cm in diameter or up to 20cm with the forestry rotor option.Our range of reversible flail mowers suits excavators 2.5 Ton - 12 Ton. As well as being incrediblyrobust, easy to use, light yet strong, they are reversible. This means that they do not have a roller, unlikeother flail heads which have a cutting direction. Being able to cut from left to right and from right to left isbeneficial especially when working on the road, where minimising the time you spend travelling againstthe traffic flow is essential. For diggers 5 – 12 Ton mulchers are available with standard, forestry or fixedtooth rotors.

Supplied with:

Optional:

6 - LS3-5 REVERSIBLE MULCHERS

MINI/EXCAVATOR 2.5T - 12T

REVERSIBLE LS3 - LS5

FLAIL MULCHERS

MODEL

DIGGER SIZE

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

4.5 - 8

LS3 600 R LS4 800 R LS4 800 GR3 LS5 1000 R

CUT WIDTH (MM)

2.5 - 4 3.8 - 4.5 6 - 12

600 800 800 1000

180 245 260 310

20- 30 25 - 30 40 - 60 - 90 40 - 60 - 90

220 220 220 220

BELT BELT BELT BELT

85 - 80 - 60 105 - 80 - 60 105 - 80 - 60 125 - 80 - 60

LS4 800FORESTRY

5 - 8

800

300

40 - 60 - 90

220

BELT

105 - 80 - 60

6 - 12

1000

360

40 - 60 - 90

220

BELT

125 - 80 - 60

6 - 12

1000

490

40 - 60 - 90

220

BELT

125 - 80 - 60

LS5 1000FORESTRY

LS5 1000FIXED TEETH

EXCAVATOR 8T - 16T

REVERSIBLE LS6

Protective chainsAnti-cavitation/flow control: a system that stops any spike in pressure/sudden stoppage fromdamaging the excavator/motorNo drain line required (except with piston engine)Hammer blades/forestry rotor

Bracket with welded or removable pinsPipesPiston motor

A powerful and impressive solution for clearing vegetation, hedge cutting, and bigger forestry jobs,with capacity to cut 15cm - 25cm in diameter depending on your choice of rotor.Options include hammer blades or forestry rotor. For larger excavators a piston engine can befitted if the working pressure exceeds 220 bar.

Supplied with:

Optional:

7 - LS6 MULCHER RANGE

MULCHERS

MODEL

DIGGER SIZE

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

8 - 16

LS6 1000 LS6 1300 LS6 1000F LS6 1300 F

CUT WIDTH (MM)

8 - 16 8 - 16 8 - 16

1050 1300 1050 1300

480 540 535 595

70 - 80 - 90 70 - 80 - 90 70 - 80 - 90 70 - 80 - 90

220 220 220 220

BELT BELT BELT BELT

125 - 95 - 85 145 - 95 - 85 125 - 95 - 85 145 - 95 - 85

LS6 1000 FT

8 - 16

1050

685

70 - 80 - 90

220

BELT

125 - 95 - 85

8 - 16

1300

745

70 - 80 - 90

220

BELT

145 - 95 - 85

LS6 1300 FT

EXCAVATOR 10T - 25T

REVERSIBLE LS7

Protective chainsAnti-cavitation/flow control: a system that stops any spike in pressure/suddenstoppage from damaging the excavator/motorHammer blades/forestry rotor

Bracket with welded or removable pinsPipesHydraulic hood

Similar to the LS6 range, the LS7 can be supplied with a standard rotor, fitted withhammer blades for general clearing. For more heavy duty jobs, the LS7 can come fittedwith forestry rotor with hammer blades or fixed teeth.The forestry rotor cuts through treesand branches up to 35cm in diameter. The standard setup comes fitted with a variabledisplacement piston motor so that the mulcher can be used by any excavator between 13and 25 Ton. With these mulchers, you can choose to have hydraulically controlled hoodsor the hoods can be adjusted manually.

Supplied with:

Optional:

8 - LS7 MULCHER RANGE

MULCHERS

MODEL

DIGGER SIZE

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

LS7 1300R LS7 1600R

CUT WIDTH (MM)

10 - 25 12 - 25

1300 1600

650 - 950 750 - 1050

40 - 50 - 63 40 - 50 - 63

200 - 350 200 - 350

BELT BELT

160 - 80 - 85 190 - 80 - 85

LS8 1200R LS8 1800R

15 - 30 20 - 30

1200 1800

1050 1320

45 - 60 - 80 45 - 60 - 80

200 - 350 200 - 350

BELT BELT

170 - 100 - 90 220 - 100 - 90

PipesHydraulic side shiftPiston motorHitch coupler for articulated backhoe-loader, backhoe loader,telescopic handlers

When it comes to clearing large areas with overgrown vegetation, toreclaim land or to tackle a forestry job, skid loader mulchers or flailsare often the preferred option. The skid steer is a fast, strong butrelatively light machine, especially if compared with a tractor.Skidsteers can reach places and do jobs that would otherwise belabour intensive. Our mulchers can be used with skidsteers from 50HP to 120 HP. Every mulcher is delivered with a standard Bobcat orcustom made mounting bracket and is fitted with an anti cavitation/flowcontrol system which means that it can be run with just 2 pipes withouthaving to fit a drain line. Available with a standard or forestry rotor.

Optional:

SKIDSTEER FLAILS

LS FS SERIES

9 - SKIDSTEER FLAILS

MODEL

DIGGER SIZE

WEIGHT (KG)

OIL REQ.

OIL PRESS (BAR)

TRANSMISSION

SIZE (MM)

LS FS5 1600 LS FS5 1800

CUT WIDTH (MM)

50 - 90 50 - 90

1300 1800

890 930

60 - 80 100 - 120

60 - 80 100 - 120

200 - 220 200 - 220

BELT BELT

182 - 120 - 110 202 - 120 - 110

LS FS5 2000 LS FS10 1300

50 - 90 70 - 120

2000 1300

970 1150

60 - 80 100 - 120 45 - 60 - 80

200 - 220 200 - 350

BELT BELT

222 - 120 - 110 170 - 100 - 160

LS FS10 1600

70 - 120

1600

1420

45 - 60 - 80

200 - 350

BELT

220 - 100 - 160

PipesStandard or quick hitch mounting brackets Delivered with a 12 month warranty

With the flexibility of having concrete available wherever it is needed including high orlofty positions, concrete mixing buckets are becoming an increasingly popularalternative to more tradition methods. As you only ever mix what you need, when youneed it rather, they are far more economical, especially when considering how muchdowntime there can be waiting for concrete deliveries. With a mixing bucket attachmenton your excavator you can load, mix and utilise concrete all without leaving the digger.

Made from strong Hardox™ to Italian engineering standards, our concrete mixingbuckets have a special auger design that pushes the mixture towards the centre of thebucket providing a perfect mix of concrete. This ‘forced’ mixing means better qualityconcrete compared with that of pan mixers which work with a system where theconcrete falls from the sides of the bucket into the mixer.Once mixed, the concrete can then be distributed by opening a bottom discharge gatehydraulically operated by an electric control from the cab. For accuracy into footings,post holes etc, a pipe can be attached. The paddles of our concrete mixing buckets arereplaceable so when they are worn the operator can grind them off the main shaft andweld new paddles into place.Optional:

MINI/EXCAVATOR 2.5T - 20T

CONCRETE MIXING BUCKETS

10 - CONCRETE MIXING BUCKET

MODEL

CAPACITY (L)

NET (KG)

LOAD (KG)

TOTAL (KG)

TRANSMISSION

TRANS. RATIO

SIZE (MM)

TS 10 TS 15 TS 20 TS 25 TS 30 TS 35 TS 40 TS 50 TS 75 TS 100

100 150 200 250 300 350 400 500 750 1000

100 x 70 x 70

100 x 70 125 x 85 155 x 90 160 x 100 170 x 100 165 x 105 195 x 110 205 x 125 220 x 125x 70 x 100 x 100 x 110 x 110 x 120 x 130 x 145 x 145

182 265 280 350 380 400 580 700 900 950

240 360 480 600 720 840 960 1200 1800 2400

422 625 760 950 1100 1240 1540 1900 2700 3350

DIRECT DIRECT DIRECT CHAIN CHAIN CHAIN CHAIN CHAIN CHAIN CHAIN

CONT. PRESSURE 130 130 130 140 140 180 160 160 180 160

180 180 180 180 180 210 190 190 200 190PEAK PRESSURE

1/8.4 1/8.4 1/8.4 10/54 10/54 10/54 10/54 10/46 10/65 10/65

The ST series is available in 2 versions: ST 200 for excavators 5 to 9 Ton, and ST 250 for excavators up to 11 Ton.Our excavator tree shear has a single ram system, two claws on each side and a fixed Hardox blade. The ST 200 iscapable of cutting 20 cm in diameter and the ST 250, 25cm. The blade is replaceable and fixed to the body of thetree shear with 6 bolts. The single ram system delivers a 26.5 Ton push to the blade making the most of the Hardoxand its cutting power. The claws of the grabs are reinforced with extra steel to avoid bending and twisting. Thedesign of our tree shears make it possible to cut a tree from its base, very close to the ground. A bracket can besupplied either with the standard mounting plate sitting at a 90° angle or mounted at the top of the tree shear (Rversion). The standard bracket can be combined with a piston rotator which is the perfect solution for all operatorswanting to also use the tree shear as a pruner.

Our W series of tree shears have been designed and built exclusively for harvesting trees and woody shrubs formachines up to 35 Ton. The cutting system is made up of a rigid body and movable jaws with a blade: the hydrauliccylinder pushes the blade through, cutting the trunk with a force that can reach 39 Ton. The collecting clampmounted between the gripper and the cutting mechanism allows the user to continue cutting multiple brancheswithout having to lay the trunk on the ground.

Grip Cut 320 - Recommended for excavators from 8 -15 Ton and ideal for cutting and collecting at the same time.Offering fast and easy collection of multiple cut trees in one go when the optional AC 320 collector is attached. Thehigh quality detachable blade that can cut up to 320mm in diameter, is bolted with pull-down screws to avoidobstacles when felling trees.

We have a range of tree shears that are suitable for cutting and handling trees, branches and bushes along fields, riverbanks and in woodlands. They are also ideal for maintaining forestry parks, the felling of trees in gardens, for clearingoperations and for cutting biomass trees.


TREE SHEARS/GRIP CUT 320

11 - TREE SHEARS

MODEL

DIGGER TON

WEIGHT (KG)

OIL REQ.

OIL PRESSURE (BAR)

ST 200 ST 250

MAX CUT (MM)

5 - 9 5 - 11

130 - 200 180 - 250

25 250

40 50

230 230

W 800 W 1100

17 19

280 - 300 400

870 1200

70 - 80 80 - 100

250 250

W 1600 GRIP CUT 320

35 8 - 15

500 320

1800 400 - 550

120 - 160 60 - 120

300 280

The GMR / GMR HD range are log grabs for 1.5 – 8 Ton. The shape of the claw and the bodyensures a 'clean' pick up with high capacity lift.

GMR / GMR SP GMR HP are an 'open finger' range of log grabs for 1.5 – 8 Ton. The 'openfinger' models are specifically designed to handle and collect cut timber and branches and loadwood chippers. Forks with bypassing jaws are unlinked for higher accuracy and speed in thelifting operation and at the same time reducing the amount of leaves and unwanted branchescollected. High standard materials and reinforced welded forks make these log grabs strong anddurable.

The GRM2 / RM and RM / HD range are suitable for 8 – 16 Ton excavators. The main feature ofthis range is the improved clamping force. The load is compacted increasing the quantity oftimber per grab.

PipesStandard or quick hitch mounting bracketsSwinging or fixed rotators

Our range of heavy duty log grabs can be fitted on 1.5 – 16 Ton excavators, forestry loaders, cranes,telescopic lifters and front loaders.

Optional:

GMR/RM LOG GRAB RANGE

MICRO/EXCAVATOR 1.5T - 16T

12 - LOG GRABS/GRAPPLES

WEIGHT (KG)

GRAB AREA (M²)

WIDTH (MM)

GRAB OPEN (MM)

1.5 - 1.8 1.8 - 2.5 2.5 - 3.5 3.5 - 4 4 - 5.5 5.5 - 7 7 - 8 8 - 12 9 - 12 9 - 12

1090 1120 1180 1400 1400 1610 1740 1650 1820 2010

48 63 85 118 141 196 265 263 400 450

100 200 200 200 200 200 200 230 250 250

0.5 1 1.9 2.1 2.1 3.0 3.0 4.0 5.5 5.5

0.12 0.15 0.19 0.23 0.23 0.27 0.38 0.31 0.40 0.48

HEIGHT (MM) 400 405 440 495 495 580 630 600 690 730

310 320 395 425 450 490 500 468 580 580DEPTH (MM)

600 600 655 735 735 815 960 1030 1180 1225

13 - 16 13 - 16

1820 2010

440 505

250 250

7.0 7.0

0.40 0.48

680 730

630 630

1180 1225

MODEL

DIGGER TON

MAX (BAR)

LIFT (TON)

GMR 1050 GMR 1100 GMR 1300 GMR 1300HD GMR 1500 GMR 1750 RM2 1650GMR 1000 RM 1800 RM 2000 RM 1800HD RM 2000HD

MICRO/EXCAVATOR 1.5T - 30T

POST DRIVERS/COMPACTION PLATES

Rubber clamp padsFork for wood/cement pole transportHydraulic pincer (for use with Larssen sheet etc) Standard or quick hitch mounting brackets

Optional

13 - POST DRIVERS/COMPACTION PLATES

Post Driver and Compaction Plate attachments are compatible with a wide range of excavators & backhoeloaders from 1.5 – 30 Ton

MAX OPENINGCLAMP (MM)

VIBRATING FORCE(KG)

FREQUENCY(RPM)

SIZE (MM)

150 320 500 800 300 800 1200 1500

1200 x 550 400 x 550 1400 x 550 1700 x 750 800 x 800x 800

1700 x 750 1900 x 750

N/A 220 220 420 220 420 420 420

N/A 0 0 100 0 100 100 100

N/A 20 20 40 10 40 40 40

2500 3000 6000 9000 6000 10000 12000 24000

OIL FLOWPILE DRIVER 20 40 60 100 20 90 100 100

150 150 150 150 150 150 150 150MAX VIB. PRESSURE(BAR)

2300 2300 2300 2300 2300 2300 2300 2300

MODEL

WEIGHT (KG)

OIL FLOWCLAMP (LT/MIN)

PB 301B PB 401B PB 501B PM 202B PM 502B PM 602B PM 702BPB 201B

x 800 x 800 x 800 x 800 x 5001400 x 750

x 950 x 950

MAX CLOSINGCLAMP (MM)

DIGGER SIZE 1.5 - 3.5 3.5 - 7 5 - 12 10 - 22 3 - 8 10 - 16 15 - 28 20 - 30

They are ideal for a range of landscaping, forestry and building jobs including piling wooden and concrete postsfor fences, photovoltaic systems, barriers and agricultural projects. Our excavator mounted post drivers areessential for work on uneven ground where getting the required force at the desired angle is problematic. Otherbenefits of having a post driver include being able to use one machine to complete the whole job, from pickingup, positioning and driving post, without the need to leave the machine. The vibration technology used by ourdrivers does not compromise the integrity of the post material like other traditional/hammer style drivers. Thestandard set up comes with the bottom vibration plate with cup customised to the size and material required todrive and with the post clamp attachment.

Our compaction plates use the same main body as our post drivers but come supplied with a base compactionplate.


CRUSHER BUCKETS/

14 - SCREENING/CRUSHER BUCKETS

Designed to reduce the volume of aggregates directly on site, the CBE crusher buckets are the obvious choicefor those who need uncompromising quality and productivity for machines 8 Ton up to 55 Ton. Every crusherbucket is fitted with a patented automatic hydraulic spin inversion system, enabling a change in rotation of thedrum to release material if stuck.

Our crusher buckets come withreplaceable secured teethA wide range of materials can becrushed due to the rotor being activatedby high-displacement radial pistonhydraulic motors, in direct driveA variety of accessories are alsoavailable to allow for different cuttingwidths between the teeth, depending onhow big or small you would like yourfinished product to be

SCREENING BUCKETS

Easily replaceable screening tools: Screeningelements have different profiles to work withvarious materials. Tool replacement is rapidand requires no disassembly of shaftsEffective with wet material

Designed for separating different-sized materialson the work site, Simex VSE screening bucketsare unique for their easy loading, very simpleoperation and high productivity. The exclusiveSimex patent allows rapid adjustment of outputsize of the screened material in only seconds viaa control in the operator cabin or via remotecontrol.

MODEL

DIGGER SIZE

TOTAL WIDTH(MM)ROTOR WIDTH(MM)

BUCKETCAPACITY (M³)NUMBER OFTEETH

REQ OIL FLOW(LPM)

CBE 10 CBE 20

MOUTH WIDTH(MM)

8 - 13 10 - 18

1030 1180

1220 1485

725 735

0.40 0.60

5 5

80 - 160 100 -190

CBE 30 CBE 40

16 - 28 24 - 40

1410 1630

1700 1960

915 1050

0.80 1

6 7

150 - 250 200 - 350

CBE 50

38 - 55

2200

2440

1290

1.80

10

300 - 550

MAX OILPRESSURE (BAR) 350 350 350 350 350

MODEL

DIGGER SIZE

TOTAL WIDTH(MM)SCREENINGAREA (M²)

BUCKETCAPACITY (M³)SCREENINGSHAFTS

SHAFT TRAVEL(MM)

VSE 10 VSE 20

MOUTH WIDTH(MM)

8 - 13 12 - 18

860 1100

1220 1485

0.56 0.80

0.40 0.70

2 2

40 40

VSE 30 VSE 40

16 - 30 30 - 45

1260 1340

1650 1835

1 1.36

1 1.8

2 3

40 40

MAX OILPRESSURE (BAR) 250 250 250 250

REQUIRED OILFLOW (LPM)

90 - 125 100 - 150 165 - 220 180 -280

Driving positions have been studied in order to give maximumcomfort for the operatorEvery control is in your hand for quick and easy machineoperationCompact for small spaces, even indoor use.Zero tail swing on most models Dedicated auxiliary pump for hydraulic attachments.Each machine is supplied with buckets and quick hitch asstandard

Robustrack are exclusive UK dealers for Eurocomach's range ofexcavators and skidsteers. The powerful mini and midi excavatorrange starts at 1.2 up to 10 Ton in weight and is designed with boththe customer and hydraulic attachments in mind.

One of the major advantages of a Eurocomach is that they aresupplied with a dedicated auxiliary pump, to solely power hydraulicattachments. This ensures that there is never any loss of hydraulicpower when another service is activated. A zero tail swing version is available for most sizes of excavator,keeping the ballast inside the width of the tracks. Developed withspace as a consideration, these compact machines are perfect whenworking in confined areas.

Contact a member of the sales team for more information and fullspecifications for the Eurocomach range of machines.

EUROCOMACH EXCAVATORS

15 - EUROCOMACH EXCAVATORS

Change the way you work with an Engcon Tiltrotator from Robustrack; official dealers offeringsales, installation, parts, service and warranty work.

Engcon’s tiltrotators can be adapted to suit most excavator models and backhoe loaders on themarket, from 1.5 Ton up to 33 Ton. These can be offered as part of the specification on your newEurocomach excavator or as a retrofit on your current machine.

A tiltrotator allows your attachments to rotate through a 360° axis and tilt +/-45° meaning that youcan work from where you stand and access those hard to reach areas, even in limited space.Engcon's integrated hydraulic quick coupler – which from 2.5 Ton can be supplied with or withoutEC-Oil, their innovative automatic hydraulic connector, allow for faster and easier tool changes.This functionality means that you can perform multiple tasks in a shorter time allowing reliance onfewer machines and reducing working times. This in turn reduces the wear of the excavator,reduces fuel consumption and allows you to expect a return on investment of around 1500 hours.

Engcon tiltrotators can be adapted for your new or existing attachments and connect directly toyour boom or underneath a quick hitch. There are several different control systems and hitchoptions to choose from based on your machine´s characteristics and our Robustrack team can helpyou select the best specification for your needs and excavator.

ENGCON TILTROTATORS

16 - ENGCON TILTROTATORS

https://robustrack.co.uk/products/

TREVI BENNE DEMOLITION

17 - TREVI BENNE

On our website we have focussed on a few keyproducts, namely the CS Series, MK Series and PMZRange, however, Robustrack are delighted to be ableto offer the full catalogue of Trevi Benne products forsupply in the UK. Contact a member of our team formore details.

Equipment for demolition, handling and recycling,including pulverisers, crushers, multi kitprocessors, metal shears and screening buckets

A full range of digging and loading buckets,standard and reinforced, for excavators andloaders, rear and front quick couplers; for thequarrying and mining industry for excavators up to500 Ton

A line dedicated to the forestry sector for treefelling, cutting and thinning woodland areas

Trevi Benne has been producing and sellingattachments and tools for earth moving equipmentsince 1992, dealing in three major product lines:

HYDRAULIC BREAKERS

Hybrid technology: Integrated nitrogen piston accumulator for constant high impact, safe start-up and smooth operation VibroSilenced Plus: Non-metallic suspension arrangements to isolate percussion mechanismfrom breaker box and sealing of all openings for lower noise and vibration levels Advanced control valve optimizes efficiency: the Energy Recovery system increases operatingefficiency and lowers vibrations

PipesStandard or quick hitch mounting brackets

With options for machines from 1 to 70 Ton, the EC Range of hydraulic breakers are qualityEuropean built products. They are a durable and reliable option for any task where performanceand reliability are essential.

Features include;

Optional:

For the full range and specifications please contact a member of the sales team. Other ranges andmanufacturers of breaker are available upon request.

EC RANGE

For all makes and model of breaker we can offer a breaker inspection and refurbishment service.Whether for ongoing maintenance and inspection of a fleet of hammers or to strip, report andrefurbish a broken down unit on an ad hoc basis, our expert team have the knowledge andexperience to provide quality service and repair. Genuine and patent parts quoted and supplied withno obligation for a full refurbishment. Our team can arrange collection and return of breakers or canvisit on-site where necessary.

What ever the brand and whatever the size, if you have a broken down breaker we can help you.

For more information please contact us via telephone or email.

18 - HYDRAULIC BREAKERS

BREAKER REFURBISHMENT

Robustrack Oldbury

Unit 1, Rood End Road

Oldbury, B69 4NB

[email protected]

Robustrack Ltd

Unit 9, Ingleton Industrial

Estate

Ingleton, LA6 3NU

+44(0)1524 242414

www.robustrack.co.uk

Documents

ROBUSTRACK - MORE THAN JUST A DISTRIBUTOR