Upload
shalom-enterprises
View
61
Download
0
Embed Size (px)
Citation preview
SHALOM SECURITY PRODUCTS ROAD BLOCKER
MODEL: SE HRB-01
ISO 9001:2008
Shalom Enterprises, Plot no – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 7394, email :
[email protected], [email protected],
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: [email protected],
Web: www.shalomsystems.net
HYDRAULIC ROAD BLOCKER
The Road-Blocker is widely used to control vehicular access at high security and medium-high
security sites all over the World. It is also increasingly being used to provide vehicle access control at
sites which, whilst not “high security” nevertheless have problems such as car theft, vandalism,
avoidance of parking charges and illegal parking / access. It is also used to provide complete
protection of premises which might be otherwise vulnerable to “Ram-Raiding”. However the most
familiar locations for the SHALOM Road-Blocker are still Military Bases, Entrances to Bank Vaults,
Cash in Transit and Security Guarding Companies, Police Stations, Airports, Power Stations,
Government Buildings and Embassies.
The design of the Road-Blocker makes it impossible to get stuck between moving parts with arms
or legs. The bright yellow stripes make sure that the Road-Blocker has a high visibility.
The SHALOM Road-Blocker is extremely durable and reliable as it is build to very high standards
with the finest materials. Provided it is maintained in accordance with the manufacturer’s
instructions, it will give many years of trouble free service.
By using special designed high quality materials and a special construction for the Road-Blocker , the
frequency of maintenance is low and there is less work to do.
Road blockers are designed especially for entrance points which have a threat of vehicle attack or
for the ones that have high security requirements. If there is a threat of vehicle attack in addition to
the control of vehicle access in high security applications, hydraulic road blockers are the unique
solution and the most secure systems. Even though the attack is from high tonnage vehicles with
high speeds, it’s not possible for the vehicle to keep on moving because of the damage given to
front, wheels and the bottom of the vehicle.
Drive unit is hydraulic, but in case of power failure road blocker can be lowered or lifted manually
with the help of manual hand pumps and valves. With the help of PLC controlled electronics,
raise/lower function can be achieved by every kind of card readers, biometric readers like
fingerprint or hand shape, radio control, on/off key switch etc. Besides, safety accessories like
photocells, inductive loop detectors, flashing lights or red/green lights can be integrated to the
system.
Construction and Foundation:
Main mechanical elements forming the construction are heavy duty, 12 mm anti-skid / plain top
plate, blocking construction and the frame consisting of 100 mm I, U and 100x100x3 mm box
beams. It’s made of steel S235JR / RAEX 250 – quality 37 at least. This sophisticated mechanical
design enables the road blocker to withstand 50 tons of axle loads, besides, in case of crash,
linkage bars transmit the impact directly to the foundation, therefore help to protect mechanism. A
cushioned cylinder powers the road blocker up as it pivots on multi-sealed bearings. The hinges
are made of hardened and stainless steel. Parts forming the drive unit, namely, piston, piston rod,
reservoir, solenoid or manual valves, pump, motor, etc. are very precisely manufactured so that
they can stand harsh environmental conditions. All the parts are hot dip galvanized (60
micrometers) / Rust Prevention(Epoxy Coated) painted in order to prevent rusting. Additionally
the parts which stand above the ground level are yellow-black painted. The hydraulic rising road
blocker will be installed in reinforced concrete foundation by M12 anchors.
HYDRAULIC ROAD BLOCKER
TECHNICAL SPECIFICATIONS
S.No Parameter Specification
1 Height Total raised height 1100mm
2 Width 4000 mm TO 6000 mm
3 Axle Loadings Will withstand any road vehicle
4
Composition
10mm Steel plate reinforced to evenly distribute any impact
giving unparalleled strength. Internal crash plate supported by
sectional steel mid plates covered with sacrificial front radius
plate, incorporating impact absorption bars with additional
internal crash bars.
5
Cabinet
1200mm high x 900mm wide x 600mm deep. 3mm Steel sheet
Finished in grey. (Alternative colours available on request).
6 Motor 4kW motor. Immersed pump
Extra Heavy duty solenoid valves for reliability in operation.
7 Normal Operating Speed 6 -8 seconds
8
Power
415V/3ph/50Hz. alternatively, power to suit customer
requirements.
9 Duty Cycle 100% rated
10
Controls
State of the art PLC controls with easy built in safety features and
manual release. Push button supplied as standard. Choice of entry
systems units etc Manual hand pump included for power failure
11 Road blocker Finish Hot dip galvanized. Primed and painted black and yellow
12 Safety It is always recommended that safety loops, traffic lights and
warning signs be used in conjunction with the Road blocker.
13 Optional Electronic vehicle detection. Encapsulated magnetic limit switches
- IP67 rated. Specialized high security control options available
14 Operational temperature
range
-25°C - +70°C
Shalom Enterprises, Plot no – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 7394, email :
[email protected], [email protected],
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: [email protected],
Web: www.shalomsystems.net