Upload
rocky
View
56
Download
0
Embed Size (px)
DESCRIPTION
Rnc, Rn5.0 Parameters-Adjs
Citation preview
Reference InformationDocument Type
Date
Search scope
Managed Object
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
ADJS
Parameter
2009-12-20 15:37
RNC, RN5.0
Parameter name
CPICH Ec/No Offset
Cell Identifier
Change origin
Disable Effect on Reporting Range
HSDPA HOPS identifier
HSDPA HOPS identifier for AMR multi-service
Include in System Information
Intra-frequency adjacency identifier
Location Area Code
Maximum UE TX Power on RACH
Mobile Country Code
Mobile Network Code
Mobile Network Code Length
NRT HOPS Identifier
Primary CPICH power
Primary Scrambling Code
RNC Identifier
RT HOPS Identifier
Routing Area Code
Tx Diversity Indicator
Abbreviated name
AdjsEcNoOffset
AdjsCI
ADJSChangeOrigin
AdjsDERR
HSDPAHopsIdentifier
RTWithHSDPAHopsIdentifier
AdjsSIB
ADJSId
AdjsLAC
AdjsTxPwrRACH
AdjsMCC
AdjsMNC
AdjsMNCLength
NrtHopsIdentifier
AdjsCPICHTxPwr
AdjsScrCode
AdjsRNCid
RtHopsIdentifier
AdjsRAC
AdjsTxDiv
3GPP name
Cell individual offset
Cell Identity; C-Id
Cells forbidden to affect Reporting range
Location Area Code; LAC
Maximum allowed UL TX power; UE_TXPWR_MAX_RACH
Mobile Country Code; MCC
Mobile Network Code; MNC
Primary CPICH power
Primary scrambling code
RNC Identifier; RNC-Id
Routing Area Code; RAC
Tx diversity indicator
Parameter group
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
Identification
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
HCConfiguration
Category
Radio Resource Utilisation
Radio Resource Utilisation
Operation and Maintenance
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Operation and Maintenance
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Radio Resource Utilisation
Multiplicity:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
The parameter defines the origin of the last configuration action affecting the object.
The downlink scrambling code of the Primary CPICH (Common Pilot Channel) of the intra-frequency neighbour cell.
The CPICH Ec/No Offset determines an offset value, which the UE adds to the CPICH Ec/No measurement result of the neighbouring cell before it compares the Ec/No value with the reporting criteria.An intra-frequency neighbour cell is identified with the UTRAN Cell Identifier, which is composed of the Global RNC Identifier and the Cell Identifier.
This parameter indicates whether the neighbouring cell is forbidden to affect the reporting range (addition/drop window) calculation, if it belongs to the active set.
The parameter identifies the parameter set (HOPS object) controlling the intra-frequency handovers of a user having HS-DSCH allocated.
This parameter identifies the parameter set (HOPS object) controlling intra-frequency handovers of a user having HS-DSCH allocated simultaneously with AMR speech CS RAB.
The parameter determines whether the intra-frequency neighbour cell is included in the System Information Block 11&12&18 for the cell selection and re-selection procedures. The intra-frequency neighbour cell is included in the system information when the value of the parameter is "SIB". The intra-frequency neighbour cell is included in the Identification of ADJS (Intra-Frequency Adjacency) within a WCDMA cell.
The PLMN Identifier and the Location Area Code (LAC) determine the Location Area (LAI) to which the intra-frequency neighbour cell belongs to.
This parameter indicates the maximum transmission power level that a UE can use when accessing the neighbouring cell on the RACH. The UE uses the parameter in the cell re-selection procedure. If the maximum output power of the UE is lower than the value of the parameter, the UE adds the power difference (dB value) to the minimum required An intra-frequency neighbour cell is identified with the UTRAN Cell Identifier, which is composed of the Global RNC Identifier and the Cell Identifier. Furthermore, the Global RNC Identifier is composed of the PLMN Identifier, which consists of the Mobile Country Code (MCC), the Mobile Network Code (MNC), and the RNC Identifier.An intra-frequency neighbour cell is identified with the UTRAN Cell Identifier, which is composed of the Global RNC Identifier and the Cell Identifier. Furthermore, the Global RNC Identifier is composed of the PLMN Identifier, which consists of the Mobile Country Code (MCC), the Mobile Network Code (MNC), and the RNC Identifier.The parameter defines whether 2 or 3 digits are used in the Mobile Network Code (MNC).
When this parameter is modified also the MNC value used by the system is always changed.This parameter defines the parameter set (HOPS object) which controls the intra-frequency handover of a non-real time (NRT) radio bearer to the neighbouring cell.
This parameter indicates the transmission power level of the Primary CPICH (Common Pilot Channel) of the intra-frequency neighbour cell.
An intra-frequency neighbour cell is identified with the UTRAN Cell Identifier, which is composed of the Global RNC Identifier and the Cell Identifier. The Global RNC Identifier is composed of the PLMN Identifier and the RNC Identifier.
This parameter defines the parameter set (HOPS object) which controls the intra-frequency handover of a real time (RT) radio bearer to the neighbouring cell.
The Location Area (LAI) and the Routing Area Code (RAC) determine the Routing Area to which the intra-frequency neighbour cell belongs to.
This parameter indicates whether the Primary CPICH of the intra-frequency neighbour cell is broadcast from two antennas. If the Primary CPICH is broadcast from two antennas, the UE measures the received code power from each antenna separately and sums the measurement results together in order to get the total received code power on
Range:
-10..10
1..65535
0 (No), 1 (Yes)
1..100
1..100
0 (No), 1 (SIB), 2 (SIBbis)
1..31
1..65535
-50..33
0..999
0..999
2 (2), 3 (3)
1..100
-10..50
0..511
1..4095
1..100
0..255
0 (Not defined), 1 (Network originated configuration action), 2 (NetAct RNW plan originated configuration action), 3 (Element Manager originated configuration action), 4 (Configuration action by automatic tuning function), 5 (Element Manager originated mass config action), 6 (NetAct originated direct RNW change)
0 (Tx Diversity not used), 1 (Tx Diversity in use)
Step:
0.5
1
-
-
1
1
-
1
1
1
1
1
-
1
0.1
1
1
1
1
-
Unit:
dB
-
-
-
-
-
-
-
-
dBm
-
-
-
-
dBm
-
-
-
-
-
Formula for getting internal value
= UI_value * 2
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value
= UI_value * 10
= UI_value
= UI_value
= UI_value
= UI_value
Default value
0
0
1
2
0
Default value notes
Default value is not possible.
Value is set by the system
The neighbouring cell can affect the reporting range calculation, if it belongs to the active set.
Default value is not possible
Default value is not possible.
The intra-frequency neighbour cell is included in the System Information.
Default value is not possible
Default value is not possible
Default value is not possible
Default value is not possible.
Default value is not possible.
Default value is not possible
Default value is not possible
Default value is not possible.
Default value is not possible
Default value is not possible
Required on creation
Mandatory
Mandatory
Mandatory
Mandatory
Optional
Optional
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Special value
0
0
Related functions
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Mobile Device Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control
- Handover Control- Mobile Device Control
- Handover Control- Mobile Device Control
System information
- SIB18
- SIB18
- SIB11
- SIB11- SIB12- SIB18- SIB11- SIB12
- SIB11- SIB12
- SIB11- SIB12- SIB18- SIB11- SIB12- SIB18
- SIB11- SIB12
- SIB11- SIB12- SIB18
- SIB11- SIB12
Modification
onLine
onLine
unmodifiable
onLine
onLine
onLine
onLine
unmodifiable
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
onLine
Modified
ADJS creation and modification
ADJS creation and modification
ADJS creation and modification
ADJS creation and modification
ADJS creation and modification.
ADJS creation
ADJS creation and modification (with restrictions)
ADJS creation and modification
ADJS creation and modification (with restrictions)
ADJS creation and modification (with restrictions)
ADJS creation and modification
ADJS creation and modification (with restrictions). The modification is not possible if the neighbour cell is controlled by the local RNC.
ADJS creation and modification (with restrictions). The modification is not possible if the neighbour cell is controlled by the local RNC.
ADJS creation and modification
Related parameters
- DropWindow of FMCS
- HSDPAenabled of WCEL
- UEtxPowerMaxPRACH of WCEL
- AdjsMNCLength of ADJS
- AdjsMNC of ADJS
- HOPSId of HOPS
- PriScrCode of WCEL
- HOPSId of HOPS
- HOPSId of HOPS- HSDPAenabled of WCEL- AMRWithHSDSCH of RNC
Parameter relationships
The modification is always possible except if the new target cell is existing in local RNC. In this case the modification is done via the WCEL object. Cross-check between RNC, WCEL and ADJS objects is required.
The value must always be 0 (not used) if the intra-frequency neighbour cell is controlled by the local RNC; cross-check between RNC, WCEL and ADJS objects is required.
Related features
HSDPA (optional)
HSDPA (optional) AND HSDPA with Simultaneous AMR Voice Call (optional)
Extension of sib11 (standard)
Interfaces
- RNC <-> UE
- RNC <-> UE- RAC <-> RNC- EM <-> RNC- RNC -> RAC- RNC -> EM
- RNC <-> UE- RAC <-> RNC- EM <-> RNC- RAC <-> RNC- EM <-> RNC- RACApp <-> RAC- RAC <-> RNC- EM <-> RNC- RACApp <-> RAC- RAC <-> RNC- EM <-> RNC- RAC <-> RACApp- RAC <-> RNC- EM <-> RNC- RACApp <-> RAC- RNC <-> MSC- RAC <-> RNC- EM <-> RNC- RNC <-> UE- RAC <-> RNC- EM <-> RNC- RNC <-> MSC- RAC <-> RNC- EM <-> RNC- RNC <-> MSC- RAC <-> RNC- EM <-> RNC- RAC <-> RNC- EM <-> RNC
- RAC <-> RNC- EM <-> RNC- RACApp <-> RAC- RAC <-> RNC- EM <-> RNC- Planner <-> RAC- RNC <-> UE- RAC <-> RNC- EM <-> RNC- RNC <-> MSC- RAC <-> RNC- EM <-> RNC- RAC <-> RNC- EM <-> RNC- RACApp <-> RAC- RNC <-> MSC- RAC <-> RNC- EM <-> RNC
- RNC <-> UE- RAC <-> RNC- EM <-> RNC
References
- Undefined:1080
- Undefined:830
- Undefined:988
- Undefined:1091
- Undefined:1091
- Undefined:1091
- Undefined:748 (public)- Undefined:839- Undefined:841
- Undefined:1091- Undefined:723 (public)
- Undefined:986- Undefined:1243
- Undefined:839- Undefined:737 (public)- Undefined:841- Undefined:843- Undefined:701 (public)- Undefined:722 (public)- Undefined:839- Undefined:841- Undefined:737 (public)- Undefined:737 (public)- Undefined:839- Undefined:841- Undefined:723 (public)- Undefined:737 (public)
- Undefined:753 (public)- Undefined:843
- Undefined:841- Undefined:722 (public)- Undefined:839- Undefined:841- Undefined:737 (public)
- Undefined:841- Undefined:737 (public)- Undefined:839
- Undefined:722 (public)- Undefined:1091
Struct parameter