Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
1 - Whilst in unset/day mode.
2 - Enter your code/present a valid tag.
3 - Select the Area (A, B, C or D) to set.
4 - Exit the building.
1 - Whilst the EURO mini is set.
2 - Walk into the premises.
3 - Enter your code/present a valid tag.
4 - The EURO mini will be unset.
Unset the EURO mini
If a warning appears on the display:
- Press the ‘NO’ key.
- Resolve the issue.
- Set the EURO mini again.
Unable to Set
Unsetting After An Alarm - Enter your code/present a valid tag.
- The Alarm will stop sounding.
- The display will indicate the problem.
- Press the ‘YES’ Key.
Enter your PIN or present your Tag to view any further information if required.
Set the EURO mini
1 - Whilst in unset/day mode.
2 - Press the ‘C’ Key.
If the door opens you will be alerted by the ‘chime’ tone.
To cancel the ‘Chime’ function, press ‘C’ again.
The Chime Feature
1 - Whilst in unset/day mode.
2 - Enter your code/present a valid tag and select the Area (A, B, C or D) to set.
3 - Press ‘YES’. ‘OMIT INPUT’ will be displayed.
4 - Select the input(s) to be omitted/bypassed. Press ‘YES’ after selecting the input. After 10 seconds the EURO mini will set.
NOTE: These inputs will be omitted for this one set period only.
Omitting An Input
EURO mini - Quick Reference User Guide Page 1
1 2 3 4
1 2 3 4
1 2
OMIT INPUT?
Omit Input [01]
1
2
3
4
1 - Whilst in unset/day mode.
2 - Press the ‘D’ key and enter the Master Manager code/present the tag.
3 - ‘SET DATE & TIME’ will be displayed.
4 - Use the ‘B’ and ‘D’ keys to scroll through the menu’s.
Entering The Master Manager Menu
1 - Whilst in the master manager menu, Press the ‘A’ Key.
2 - Day mode/Unset mode .Exiting The Master Manager Menu
1 - Enter the Master Manager Menu and press ‘YES’ until ‘SET DATE & TIME’.
2 - Enter the Year, Month, Day, Hours and Minutes, while pressing YES to confirm each change.
3 - Press the ‘A’ key to exit the menu.
Set Date & Time
1 - Enter the Master Manager Menu and press ‘YES’ until ‘WALK TEST?’.
2 - Enter the Areas and Press ‘YES’ .
3 - Alternatively, Press ‘NO’ and walk test selected individual inputs.
4 - Once all inputs have been walk tested successfully, ‘Walk Test Completed’ will be displayed.
Walk Test
1 - Enter the Master Manager Menu and press ‘YES’ to ‘CHANGE CODES’.
2 - Select the user code using the arrow keys.
3 - Enter a new code, present a new tag or to delete a code, press the ‘C’ key.
4 - Select the user type (Manager or User) using the arrow keys.
5 - Select the user areas (A, B, C or D), press YES and select the user set options using the arrow keys.
6 - Enable/Disable Flexi Set using the arrow keys.
7 - Enter the user name.
Change Codes
EURO mini - Quick Reference User Guide Page 2
User Number [02]
Enter User Code
1 2 3 4
1 2
1 2 3
User Type
User Areas
Flexi Set
User Name
1 2 3 4 5 6 7
WALK TEST?
Walk Test Area? [ABCD]
Walk Test Inps?Front Door
Walk TestCompleted!
1 2 3 4