3
Hunter Avenue Loanhead Midlothian EH20 9SW VAT NO: 271 2904 69 Email: [email protected] Member of the Mactaggart Scott Group RM510 Radial Piston Motor RM510 = 22kW, 31HP - R52 110 = 1.7kW, 2.4HP - R14 Mass (Motor Only) 254 lbs / 115 kgs Moment of Inertia of rotating parts 48 lb.in² / 14 gm² (motor only) Max Overhung Force on motor shaft 1460 lbf. / 6500 N Temperature Range -4°F to +176°F / -20°C to +80°C Lubricating Oil Capacities - Horizontal 38 fl. oz. / 1.1 liters, Vertical 74 fl. oz. / 2.1 liters. Use a good quality hydraulic oil with a viscosity of around 460SSU (100cSt) at 104°F / 40°C. Airline Filtration and Lubrication - Use 64 micron filtration or better. Choose a lubricator suitable for the flow required. Prior to initial start-up, inject oil into the inlet port. Lubricator drop rate: 3-4 drops/minute continous operation. Lubrication drop rate 6-10 drop Length Width Height (in.) (mm.) (in.) (mm.) (in.) (mm.) RM510 23.22 590 18.5 470 18.5 470

RM510 Radial Piston Motor - MacScott Bond · RM510 Radial Piston Motor RM510 = 22kW, ... good quality hydraulic oil with a viscosity of around 460SSU ... Piston Assembly Compression

Embed Size (px)

Citation preview

Page 1: RM510 Radial Piston Motor - MacScott Bond · RM510 Radial Piston Motor RM510 = 22kW, ... good quality hydraulic oil with a viscosity of around 460SSU ... Piston Assembly Compression

Hunter Avenue Loanhead

Midlothian

EH20 9SW

VAT NO: 271 2904 69

Email: [email protected]

Member of the Mactaggart Scott Group

RM510 Radial Piston Motor

RM510 = 22kW, 31HP - R52 110 = 1.7kW, 2.4HP - R14 Mass (Motor Only) 254 lbs / 115 kgs

Moment of Inertia of rotating parts 48 lb.in² / 14 gm² (motor only)

Max Overhung Force on motor shaft 1460 lbf. / 6500 N

Temperature Range -4°F to +176°F / -20°C to +80°C

Lubricating Oil Capacities - Horizontal 38 fl. oz. / 1.1 liters, Vertical 74 fl. oz. / 2.1 liters. Use a good quality hydraulic oil with a viscosity of around 460SSU (100cSt) at 104°F / 40°C.

Airline Filtration and Lubrication - Use 64 micron filtration or better. Choose a lubricator suitable for the flow required. Prior to initial start-up, inject oil into the inlet port. Lubricator drop rate: 3-4 drops/minute continous operation. Lubrication drop rate 6-10 drop

Length Width Height

(in.) (mm.) (in.) (mm.) (in.) (mm.)

RM510 23.22 590 18.5 470 18.5 470

Page 2: RM510 Radial Piston Motor - MacScott Bond · RM510 Radial Piston Motor RM510 = 22kW, ... good quality hydraulic oil with a viscosity of around 460SSU ... Piston Assembly Compression

Hunter Avenue Loanhead

Midlothian

EH20 9SW

VAT NO: 271 2904 69

Email: [email protected]

Member of the Mactaggart Scott Group

Page 3: RM510 Radial Piston Motor - MacScott Bond · RM510 Radial Piston Motor RM510 = 22kW, ... good quality hydraulic oil with a viscosity of around 460SSU ... Piston Assembly Compression

Hunter Avenue Loanhead

Midlothian

EH20 9SW

VAT NO: 271 2904 69

Email: [email protected]

Member of the Mactaggart Scott Group