RL SERIES · Model RL8 RL10 Physical parameters LED type SMD3535 SMD3535 Pixel pitch 8 mm 10 mm Module Dimensions(W×H×D) 320x320 mm 320x320 mm Panel dimensions (W×H×D) 960x960x161

RL SERIESFeel protected in water !

Focus on the beauty of LED

[email protected]

1. Product Overview

3. Product Features

4. Product Specification

3.1 Appearance

3.2 Performance

3.3 Structure

Catalogue

2. Product Overview


[email protected]

Feel protected in water!Professional high-brightness outdoor LED display!

Product OverviewPART ONE


[email protected]

RL Series has two cabinets

options：

Cabinet: 960x960mm

SMD: 8/10/16 pixel

DIP:10 pixel

Cabinet: 1200x900mm

SMD: 5/6 pixel

RL Series is the upgraded

version of our outdoor fixed

led display.

Two options of LED: SMD and

DIP. High brightness, high

refresh rate, high grey scale,

adjustable softy ware; Wide

view angle, lower power

consumption, reliable

performance; DC fans help to

release heat; separate switch,

easy for maintenance.


[email protected]

Cabinet ：960x960*161mm Cabinet ：1200x900*161mm

● RL8/10/10/16 ● RL5/6

● SMD，With three fans ● SMD，With three fans

Products


[email protected]

Scope of ApplicationPART TWO

Feel protected in water!

Professional high-brightness outdoor LED display!


[email protected]

应用范围

电视台

Application:

Fit for : Stadiums, The

commercial plazas, Railway

station squares, Airports,

Pedestrian Streets, Bus

stations, Metros, Leisure

wharfs, Exhibition halls, etc.


[email protected]

Product FeaturesPART THREE




[email protected]

2018-11-2

High brightness

High brightness outdoor led display ensures vivid and clear images quality

even in the bright sunlight and fits both day and night.

Ø High Brightness reached to 6000-7000nits;

Ø Lower power consumption. take L10DS as an example, it saves 25%

power consumption than traditional cabinet, average power consumption

is only 185W/㎡.

3.2·Performance

IP65/IP54

High IP rating: The outdoor screens come with waterproof module masks, IP65/54. It can be installed without protection covers.

This series will cater to most outdoor applications due to its outstanding water resistance and safety performance.

Traditional

Waterproof frame、AC for heat dissipation

NowNaked installation，without cover


[email protected]

Front & rear maintenanceSave more space and makes outdoor advertisement more colorful!

3.3·Structure

▲ Front maintenance

▼ Rear maintenance

Maintain holes on module,

fast install and dismantle

There are corresponding holes on the modules

which connect the fast lock, it’s very convenient to

use screwdriver lock or dismantle the module from

front side.


[email protected]

There are 4PCS magnets on module and frame which are helping for easy and fast assembling.

Module magnet sheet, good for fast assembling


[email protected]

Wall mounting installation

The display can be installed close to the wall to

save spaces, which can fit in multiple installation

conditions.


[email protected]

Each cabinet have three wire boxes to conceal wires which can protect the wires against water meanwhile

keep beauty of the appearances.

Wire box


[email protected]

The power supplies and HUB boards are decentralized

distributed that can speed up heat dissipation to

ensure the display effect and prolong the display use

life.

Perfect heat dissipation

Three DC fans under the power supplies can

improve the heat dissipation efficiently to ensure

good and stable play performance.

Three DC fans


[email protected]

Pressure respirator

The cooling respirator is constructed on rear cover of module to maintain balance

of the air pressure of both interior and exterior to release heat, which can

effectively undermine the mask damages of pressure difference caused by

temperature changes.


[email protected]

The wires in each cabinet are wear the

nylon cover to keep the appearance cleanly

and tidily.

Wire’s Coat – nylon cover


[email protected]

Locating cylinderprecise positioning rapidly

Ø Two locating cylinders on up and down side near the pin which can differentiate insert direction to chase precise positioning;Ø Two locating hole on female header mapped to the locating cylinders is with different diameter which can help fast installation.


[email protected]

Each cabinet system box has 1PCS switch, when there

is a failure on one cabinet in a big screen, just need to

turn off the power of the cabinet to maintain it, safe

and practical.

Individual switch, safe and practical


[email protected]

The test button on the system card used to do primary test when maintain the individual cabinet conveniently and efficiently.

Test button on the system card


[email protected]

Folding support leg

Each system box has a folding support leg, it can hold up while the cabinet maintenance.


[email protected]

Each HUB board equip with high quality bull horn pins/ female

headers which can fasten the wire tightly to ensure the steady

signal.

Bull horn pins/ female headers


[email protected]

Wide module mask brim design can prevent dust and water into cabinet

and then protect LED lamps.

Wide mask brim


[email protected]

Product Specification PART FOUR




[email protected]

Model RL5 RL6

Physical parameters

LED type SMD 1921 SMD 2727 Pixel pitch 5 mm 6 mmModule Dimensions(W×H×D) 300x300x20 mm 300x300x22 mmPanel dimensions (W×H×D) 1200x900x130 mm 1200x900x132 mmModule weight 1.1 kg 1.1 kgWeight 38 kg/pane 38.5 kg/pane

Electronic parameters

Color depth (Bit) 12-16 bit 12-16 bitGrey scale 32768 32768 Refresh rate ≥2880 Hz 1920 HzDriving type 1/10 scan 1/5 scanFrame frequency（Hz） 50/60 50/60

Signal transmission

CAT5＜100m100m＜multi-mode optical fiber＜500m500m＜single mode optical fiber＜10km


Optoelectronic parameters

Brightness 6100 nits 6200 nitsColor temperature（K） 5000K～9500K Adjustable 5000K～9500K AdjustableHor. /Ver. Viewing angle 160°/140° 160°/140°

Electrical parameters

Input voltage & frequency 100-240 V / 50-60 Hz 100-240 V / 50-60 HzPower consumption(max) 724 W/㎡ 611 W/㎡Power consumption (average) 241 W/㎡ 203 W/㎡

Environmental parameters

Temperature range -20 ℃/ +50℃ (operational) -20 ℃/ +50℃ (operational)-40 ℃/ +60℃ (storage) -40 ℃/ +60℃ (storage) IP rating (Front/Rear) IP65/IP54 IP65/IP54

Humidity 10%-90% (operational) 10%-90% (operational)10%-90% (storage) 10%-90% (storage)Lifetime(50% brightness) 100000 100000

Installation Recommended application fix fix

Model RL8 RL10

Physical parameters

LED type SMD3535 SMD3535 Pixel pitch 8 mm 10 mmModule Dimensions(W×H×D) 320x320 mm 320x320 mmPanel dimensions (W×H×D) 960x960x161 mm 960x960x161 mmModule weight 1.25 kg 1.2 kgWeight 28 kg/panel 29 kg/panel


Color depth (Bit) 12-16 bit 12-16 bitGrey scale 4096-65536 4096-65536 Refresh rate ≥2040 Hz ≥2040 HzDriving type 1/4 scan 1/2 scanFrame frequency（Hz） 50/60 50/60

Signal transmissionCAT5＜100m100m＜multi-mode optical fiber＜500m500m＜single mode optical fiber＜10km







Temperature range -20 ℃/ +50℃ (operational) -20 ℃/ +50℃ (operational)-40 ℃/ +60℃ (storage) -40 ℃/ +60℃ (storage) IP rating (Front/Rear) IP 65 / IP 54 IP 65 / IP 54



Model RL10D RL16D

Physical parameters

LED type DIP346 SMD3535 Pixel pitch 10 mm 16 mmModule Dimensions(W×H×D) 320x320 mm 320x320 mmPanel dimensions (W×H×D) 960x960x115 mm 960x960x161 mmModule weight 1.9 kg 1.05 kgWeight 33.5 kg/panel 29 kg/panel


Color depth (Bit) 12-16 bit 12-16 bitGrey scale 4096-65536 4096-65536 Refresh rate ≥2040 Hz ≥2040 HzDriving type 1/4 scan staticFrame frequency（Hz） 50/60 50/60

Signal transmissionCAT5＜100m100m＜multi-mode optical fiber＜500m500m＜single mode optical fiber＜10km







Temperature range -20 ℃/ +50℃ (operational) -20 ℃/ +50℃ (operational)-40 ℃/ +60℃ (storage) -40 ℃/ +60℃ (storage) IP rating (Front/Rear) IP 65 / IP 54 IP 65 / IP 54



Documents

RL SERIES · Model RL8 RL10 Physical parameters LED type SMD3535 SMD3535 Pixel pitch 8 mm 10 mm Module Dimensions(W×H×D) 320x320 mm 320x320 mm Panel dimensions (W×H×D) 960x960x161