-
8/10/2019 Rig Grip Safety Mats
1/4
mailto:[email protected]
-
8/10/2019 Rig Grip Safety Mats
2/4
Rig-Gripsafetymats are designed primarily for rig floor
applications;they are commonly used around the rigs rotary table to
provide
traction and sound footing in this notoriously hazardous area.
Rig-
Grip mats can also be found on adjoining deck & setback
areas, as
well as a number of other high risk areas. Rig-Grip mats offer
superb
levels of traction even in the most hazardous of conditions.
Rig-Grip heavy duty anti-slip safety matting is manufactured
using
high quality chemical & fire resistant poly-urethane
polymers. Each
mat is custom moulded and incorporates SafetyGrips unique
high
traction surface, thus providing an excellent non-slip
working
surface.
Rotary applications typically consist of a 30mm (1) thick mat -
this
provides sufficient strength, durability and traction to handle
even
the heaviest of workloads.
General deck areas are usually 20mm () thick; this provides
adequate traction and slip protection for hazardous areas
whilst
helping keep cost down.
Safe Zones & Walkways require less robust mat, therefore our
12mm
() interlocking mat can be ideal for this type of
application.
Rig-Grip safety mats are proven to reduce the
hazards of slips, trip and falls on the drill floor.
-
8/10/2019 Rig Grip Safety Mats
3/4
Specification
Rig-Grip mats are manufactured in-house at our Aberdeen
facility,each mat is custom made and configured to our customers
exact
specifications, thus ensuring an accurate fitment to your rig
floor.
All our mats are manufactured with high quality custom
blended
urethanes to ensure superior chemical, tear and abrasion
resistance.
Shore hardness 33 D / A 90 DIN EN ISO 868
Tensile strength 8.0 N/mm
2
DIN 53455Elongation at break 280 % DIN 53455
Tear resistance 22 N/mm DIN 53356
Linear thermal expansioncoefficient
110 10-6
K-1
DIN 53752
Grip Test results 0.95 Coefficient of friction (CoF)
Temperature range -35C to +95C -35F to +200F
Service
Unsure how to measure or size your mats? Please drop our
technical
team a line and they can assist you through the process
additionally we have field engineers who can undertake site
surveys
and inspection.
Long term Solution
Rig-Grip safety mats are designed to offer many years of
reliable
serviceIf after several years of use you feel the surface is
beginning
to wear, please contact us and we can arrange for the surface to
be
restored to its original condition.
Rig-Grip safety mats will provide years of
reliable service.
-
8/10/2019 Rig Grip Safety Mats
4/4
SafetyGrip Solutions Ltd
11 Badentoy Place
Badentoy Industrial Estate
Portlethen, Aberdeen
AB12 4YF, UK
Tel: +44 (0)1224 [email protected]
www.safetygripsolutions.com
ENGINEERED FOR PERFORMANCE
mailto:[email protected]:[email protected]
