RhinoBulk BDRhinoBulk BD®® Bottom Discharge Bottom Discharge Bulk Liquid Transportation SystemBulk Liquid Transportation System

exclusively fromexclusively from

Trans Ocean Distribution LtdTrans Ocean Distribution Ltd

Note: the design of thesteel bulkhead is such thatboth doors can be safelyopened under full load

The RhinoBulk BDThe RhinoBulk BD®® System featuring the System featuring the New Steel Bulkhead SystemNew Steel Bulkhead System

The TOD system is able to The TOD system is able to provide complete protection provide complete protection

against against ……

Moisture Migration Moisture Migration

Bacterial Migration.Bacterial Migration.

Oxygen MigrationOxygen Migration

HSE Risks HSE Risks –– No entry into the container either at loading or No entry into the container either at loading or discharge sites is required.discharge sites is required.

Introduction to the Introduction to the ““Next GenerationNext Generation””

RhinoBulk BDRhinoBulk BD®® tank systemtank systemSystem Features System Features

Technical PropertiesTechnical Properties

Operational FeaturesOperational Features

Removal & RecyclingRemoval & Recycling

System FeaturesSystem Features

•• Fabricated from a single highFabricated from a single high--strength PE material strength PE material formulated exclusively for the TOD Group.formulated exclusively for the TOD Group.

•• An optional High Barrier exterior layer.An optional High Barrier exterior layer.

•• Bottom Discharge Bottom Discharge ““ISO TankISO Tank”” format.format.

•• Steel / Inorganic Bulkhead systemSteel / Inorganic Bulkhead system

•• Fully recyclable Fully recyclable -- category category

The fitted tank complete with optional The fitted tank complete with optional barrier sleevebarrier sleeve

Technical PropertiesTechnical Properties

Made from FDA Approved 100% Virgin Polyethylene.Made from FDA Approved 100% Virgin Polyethylene.

Full EU Regulatory Food Contact Approval.Full EU Regulatory Food Contact Approval.

Incorporate optional barriers preventing oxygen, moisture and Incorporate optional barriers preventing oxygen, moisture and bacterial migration.bacterial migration.

Guaranteed lowest surface areaGuaranteed lowest surface area--toto--volume ratio on the marketvolume ratio on the market(calculated using solid modelling CAD application)(calculated using solid modelling CAD application)

RhinoBulk BDRhinoBulk BD®® unloadingunloading

Valve supportValve support

RhinoBulk BDRhinoBulk BD®® is protected by a is protected by a UK PatentUK Patent

patent # GB 2 372984 B granted on 16 April 2003patent # GB 2 372984 B granted on 16 April 2003

priority date 07 August 2001priority date 07 August 2001

filing date 28 August 2001filing date 28 August 2001

publication date 11 September 2002.publication date 11 September 2002.

Operational FeaturesOperational FeaturesThe RhinoBulk BDThe RhinoBulk BD®® is manufactured from clear PE is manufactured from clear PE material which allows constant visualization of the material which allows constant visualization of the product during the load & discharge process.product during the load & discharge process.

The material is lightweight and flexible whilst The material is lightweight and flexible whilst providing increased strength at both yield and providing increased strength at both yield and ultimate break limits. This makes RhinoBulk BDultimate break limits. This makes RhinoBulk BD®®

operationally robust.operationally robust.

The single membrane allows complete and thorough The single membrane allows complete and thorough draining without the need to manipulate the tank by draining without the need to manipulate the tank by hand.hand.

The RhinoBulk BD system allows easy The RhinoBulk BD system allows easy ““post loadingpost loading””and and ““prepre--dischargedischarge”” sampling.sampling.

Post loading & Pre discharge sampling is identical to ISO tank systems

The Bottom Discharge Tank being unloadedThe Bottom Discharge Tank being unloaded

Optional valve supportOptional valve support

Completely discharged and Completely discharged and emptyempty..It is not necessary to fold or roll up the tank to achieve totalIt is not necessary to fold or roll up the tank to achieve total drainingdraining

Note: on averageNote: on averageproduct residue isproduct residue is

50 liters50 liters

Removal & Recycling / DisposalRemoval & Recycling / Disposal

The RhinoBulk BDThe RhinoBulk BD®® System is made entirely from materials System is made entirely from materials of the same recycling group.of the same recycling group.

There is no outer carcass to be manually separated before There is no outer carcass to be manually separated before the tank can be recycled.the tank can be recycled.

The wall linings, outer barrier skin, & main membrane can all The wall linings, outer barrier skin, & main membrane can all be recycled in the same system / recycling group.be recycled in the same system / recycling group.

Removal & Recycling / DisposalRemoval & Recycling / Disposal

Disposal services can be provided on most Disposal services can be provided on most routes & destinationsroutes & destinations

Alternatively, there are various methods (if Alternatively, there are various methods (if required) to remove on site after discharge.required) to remove on site after discharge.

Removal & Recycling / Disposal:Removal & Recycling / Disposal:alternative methodsalternative methods

A.A. Fold & Remove in Container.Fold & Remove in Container.Remove Bulkhead. Fold tank in half lengthways & roll from front Remove Bulkhead. Fold tank in half lengthways & roll from front of of container towards the doors. Remove folded tank to recycling or container towards the doors. Remove folded tank to recycling or waste binwaste bin

B.B. Remove from Container and Fold / Roll. Remove from Container and Fold / Roll. Remove Bulkhead. Remove from container & either fold or roll theRemove Bulkhead. Remove from container & either fold or roll thetank on the ground. Remove to recycling or waste bintank on the ground. Remove to recycling or waste bin

Removal & Recycling / DisposalRemoval & Recycling / Disposal

C.C. Cut & Remove Tank in SectionsCut & Remove Tank in SectionsRemove Bulkhead. Pull the tank from the container in Remove Bulkhead. Pull the tank from the container in 1 to 2m sections. Cut the tank across its width and 1 to 2m sections. Cut the tank across its width and remove sections to the recycling or waste bin.remove sections to the recycling or waste bin.

A.A. Remove from Container and Fold / Roll. Remove from Container and Fold / Roll.

B.B. Remove from Container and Fold / Roll. Remove from Container and Fold / Roll.

C.C. Cut & Remove Tank in SectionsCut & Remove Tank in SectionsPull tank out 1 to 2 metres Pull tank out 1 to 2 metres ––

Cut front strip off tank, fold, and place in recycling binCut front strip off tank, fold, and place in recycling bin

Leading the way through innovation Leading the way through innovation in the safe, reliable and costin the safe, reliable and cost--effective transport of bulk liquids:effective transport of bulk liquids:

The Trans Ocean Group of CompaniesThe Trans Ocean Group of Companies