28
RHINO Winch & Plow Windshields & Mirrors Sun Tops & Sun Top Covers Vehicle Protection Cargo Hunting Custom Body Kits Interior/ Accents Performance Lighting Tire Chains "Distributed by Yamaha" Accessories BUILD – YOUR – OWN Check out this unique interactive section of the Yamaha website that lets you "build your own" Rhino from a huge line-up of Genuine Yamaha Accessories. This feature lets you choose and install accessories, change the color scheme, view from both the side and underside, print out your customized Rhino, or even email your local Yamaha dealer a wish list of everything you picked to build your own custom Yamaha Rhino… you could be blazing down the trails or burning up the dunes in your own customized Rhino in no time! It’s simple, fun, and easy thanks to the wonders of the Internet. Check it out today at yamahaoutdoors.com

RHINO - yocracing.com · RHINO Winch & Plow Windshields ... reduce dust blowing into passenger area. ... Radiator Guard Replaces stock plastic guard with a lightweight but durable

Embed Size (px)

Citation preview

RHINO

Winch & Plow

Windshields & Mirrors

Sun Tops & Sun Top Covers

Vehicle Protection

Cargo

Hunting

Custom Body Kits

Interior/ Accents

Performance

Lighting

Tire Chains

"Distributed by Yamaha" Accessories

BUILD – YOUR – OWN

Check out this unique interactive section of the Yamaha website that lets you "build your own" Rhino from a huge line-up of Genuine Yamaha Accessories. This feature lets you choose and install accessories, change the color scheme, view from both the side and underside, print out your customized Rhino, or even email your local Yamaha dealer a wish list of everything you picked to build your own custom Yamaha Rhino… you could be blazing down the trails or burning up the dunes in your own customized Rhino in no time! It’s simple, fun, and easy thanks to the wonders of the Internet.

Check it out today at yamahaoutdoors.com

RHINO®

Winch & Plow

WINCH & PLOW

1. Yamaha 3000 lb. Winch by WARN®

Includes heavy-duty 3000 lb. capacity winch assembly and wired remote. Requires Winch Mount & Front Hitch (SSV-5B482-20-00), sold separately.

SSV-5B481-20-00 $581.95

2. Multi-Mount Winch KitPut the winch where you need it for your job. Kit allows easy relocation of the winch at the front or rear of your Rhino. Includes heavy-duty 3000 lb. winch assembly, wired remote, rear mount, and necessary hardware. Requires Winch Mount & Front Hitch (SSV-5B482-20-00), sold separately.

SSV-5B483-20-00 $699.95

3. Winch Mount & Front HitchHeavy-duty steel winch mount. Includes 2" hitch receiver.

SSV-5B482-20-00 $71.95

4. Replacement Wired Remote SwitchSSV-5UG90-00-00 $67.95

3

W

1Ia(

S

2PeRwR(

S

3Hr

1

S

4S

2

4

These accessories fit all Rhino models unless otherwise noted

RHINO®

Winch & Plow

5. Yamaha Snow Plow SystemExclusive Yamaha design. This superior system that provides all the advantages you need when plowing snow. Lightweight with impact resistant plastic design and a powder-coated steel frame. Wide design 66" scraper blade with an aggressive angle for more effective clearing. Innovative, industry-first dual trip design allows the blade to yield its angle when striking objects. Includes Plow Chassis Mount, Mounting Arm Assembly, Plow Blade Assembly, and Lift Motor Assembly. Requires Winch Mount & Front Hitch (SSV-5B482-20-00) sold separately.

SSV-5UG84-00-00 $1,390.80

Individual Plow Replacement Components

Plow Chassis MountIncludes mount plates and hardware kit and mounting pin set required to mount system.

SSV-5UG84-10-00 $65.95

Replacement Hardware Kit – Chassis MountReplacement hardware kit for Chassis Mount.

SSV-5UG84-13-00 $8.95

Replacement Mounting Pin SetReplacement mounting and cotter pins.

SSV-5UG84-14-00 $6.95

Mounting Arm AssemblyMounting tube assembly including clutch, blade mount, blade pivot hardware, and spring set.

SSV-5UG84-20-00 $369.95

Replacement Blade Pivot HardwareReplacement steel bushings.

SSV-5UG84-22-20 $9.95

Replacement Spring SetReplacement springs and eye bolts.

SSV-5UG84-22-30 $38.95

Plow Blade AssemblyThe complete blade assembly, ready to install.Steel frame construction with a lightweight plastic blade, trip springs, and all hardware necessary to mount it to the Mounting Arm Assembly.

SSV-5UG84-30-00 $455.95

Replacement Blade – PlasticSSV-5UG84-32-00 $45.95

Replacement Scraper BladeSSV-5UG84-33-00 $65.95

Replacement Skid Shoe Set(Set of two)

SSV-5UG84-35-00 $17.95

Replacement Bump StopsReplacement nylon blade cushions. (Set of 4.)

SSV-5UG84-36-01 $11.95

Replacement Marker Pole Set(Set of two.)

SSV-5UG84-37-00 $29.95

Lift Motor Assembly Mounting Arm Assembly

Back View

Lift Motor AssemblyIncludes lift motor, all switches, relays, wiring, and mounting bracket.

SSV-5UG84-90-00 $498.95

Replacement Pull StrapSSV-5UG84-92-07 $8.95

Replacement Wire Harness SetSSV-5UG84-96-00 $129.95

5

RHINO®

Windshields & Mirrors

These accessories fit all Rhino models unless otherwise noted

WINDSHIELDS

1. Two-Piece WindshieldThis two-piece, convertible windshield allows for increased airflow by simply swiveling the top section out, providing a wind break. For full ventilation the top section can be completely removed with no need for tools. Extra-thick 6mm polycarbonate construction with special scratch-resistant coating for ultimate durability. Integrated mounting brackets for a finished look.

SSV-5B403-20-00 $449.95

2. WindshieldConstructed of extra-thick 6mm polycarbonate with special coating that helps resist abrasion and UV light for added durability. Double-bend along the top edge helps provide excellent rigidity.

SSV-5UG03-01-00 $321.50

3. Wind DeflectorConstructed of extra-thick 6mm polycarbonate with special coating that helps resist abrasion and UV light for added durability. Approximately 13-1/2" tall.

SSV-5UG08-00-00 $182.95

4. Rear WindowEasily attaches to upper frame cross tube and behind seats. Provides additional weather protection and helps reduce dust blowing into passenger area. Zippered window for venting or to allow gun boot mounting. Black (Shown)

SSV-5UG04-20-BK $89.95Realtree Hardwoods HD® Camouflage

SSV-5UG04-10-HD $99.95

MIRRORS

5. NEW! Billet MirrorThis mirror is a great looking piece to add to any Rhino. Designed to match other billet items. Made from CNC-machined 6061 polished billet aluminum. Mirror is mounted inboard to help prevent damage from trail debris. Fits left and right side. (Sold individually.)

5B4-F6204-U0-00 $98.95

6. Side MirrorMirror adds function and enhances the look of the Rhino. Easy, bolt-on installation. (Left and right sides sold individually.)

a. Left

SSV-5UG18-10-00 $37.95

b. Right

SSV-5UG19-10-00 $37.95

W

1T

osts

S

Csfh

S

3Csf

S

DC

d

6ME

aS

1 2

3 4

6a 6b

5

RHINO®

Sun Tops & Sun Top Covers

SUN TOPS

7. Aluminum Sun TopStrong yet lightweight 5052-H32 aluminum construction with brushed finish.Silver

SSV-5UG98-10-00 $310.95

8. Molded Sun TopConstructed of durable high-molecular-weight polyethylene (HMWPE). Contoured and textured design adds strength and style. Steel powder-coated mounting brackets install onto existing cage/frame mounting points.Black

SSV-5UG97-00-00 $264.95

9. NEW! Molded Sun Top CoverEasy to install. Provides durable camo cover for Molded Sun Top (SSV-5UG97-00-00). Realtree® AP HD™ Camouflage(matches ’08~’09 unit camo pattern)

5B4-K830V-T0-00 $79.95

10. Soft Sun TopTough polyester fabric construction.

a. Hunter Green

SSV-5UG96-00-GN $53.95

b. Realtree Hardwoods HD® Camouflage

SSV-5UG96-00-HD $53.95NEW! Black (Not shown)

5B4-K830V-U0-00 $59.95NEW! Realtree® AP HD™ Camouflage (Not shown)(matches ’08~’09 unit camo pattern)

5B4-K830V-V0-00 $66.95

7 8

10a 10b

9

RHINO®

Vehicle Protection

These accessories fit all Rhino models unless otherwise noted

VEHICLE PROTECTION

1. Baja Front Bash PlateSpecifically designed to provide additional protection when using the Baja Front Grab Bar, sold separately. Does not work with Baja II Front Grab Bar.Fits ’08~’09 Rhino 700/ 450 and ’06~’07 Rhino 660/ 450 models equipped with Baja Front Grab Bar

SSV-5UG31-30-00 $150.95

2. NEW! Baja II Front Bash PlateSpecifically designed to provide additional protection when using the Baja II Front Grab Bar (5B4-F84L0-V0-00), sold separately.Fits all Rhino models equipped with Baja II Front Grab Bar

5B4-F84C0-V0-00 $54.95

3. Radiator GuardReplaces stock plastic guard with a lightweight but durable aluminum piece styled after similar accessories for the Raptor® 700R and YFZ450 Sport ATVs.Fits ’07~’09 Rhino 700/ 660/ 450

SSV-5UG20-10-00 $103.95

4. Front Bash/ Skid Plate SetStrong, yet lightweight 5052-H32 aluminum construction. Does not work with Baja II Front Grab Bar.(Two-piece set.)Fits ’04~’05 Rhino 660Silver (Shown)

SSV-5UG31-00-00 $289.95Gray Hard Anodized

SSV-5UG31-00-GR $321.95

5. Front Bash Plate Strong, yet lightweight 5052-H32 aluminum construction. Silver NEW! Fits ’08~’09 Rhino 700/ 450 and ’06~’07 Rhino 660/ 450 with Baja II Front Grab Bar.

SSV-5B431-10-00 $99.95Fits ’08~’09 Rhino 700/ 450 and ’06~’07 Rhino 660/ 450 (Does not work with Baja II Front Grab Bar)

SSV-5UG31-10-00 $129.95

6. Engine/ Frame Skid PlateStrong, yet lightweight 5052-H32 aluminum construction. Covers front portion of frame.Fits ’04~’05 Rhino 660Silver (Shown)

SSV-5UG34-00-00 $160.95Gray Hard Anodized

SSV-5UG34-00-GR $193.95

These accessories fit all Rhino models

V

1SuwFm

S

S

sF

3RaRF

S

4

1 2

3 4

5 D

FS

SG

S

SSN

6

RHINO®

Vehicle Protection

7. Front A-Arm GuardsStrong yet lightweight 5052-H32 aluminum construction. Help to protect front drive shafts. (Set of two.)Silver (Shown)Fits ’08~’09 Rhino 700

SSV-5B432-00-00 $124.95Fits ’04~’07 Rhino 660 and ’06~’08 Rhino 450

SSV-5UG32-00-00 $124.95Gray Hard AnodizedFits ’04~’07 Rhino 660 and ’06~’07 Rhino 450

SSV-5UG32-00-GR $145.95

8. Rear A-Arm Guards Strong yet lightweight 5052-H32 aluminum construction. Covers sides of frame under floorboards.Silver Fits ’08~’09 Rhino 700/450

SSV-5B433-10-00 $124.95Fits ’04~’07 Rhino 660 and ’06~’08 Rhino 450 (Shown)

SSV-5UG33-10-00 $113.95 Gray Hard Anodized Fits ’04~’07 Rhino 660 and ’06~’07 Rhino 450

SSV-5UG33-10-GR $134.95

9. Side Skid PlatesStrong, yet lightweight 5052-H32 aluminum construction. Guards help protect rear drive shafts. (Set of two.)Silver (Shown)Fits ’08~’09 Rhino 700/450

SSV-5B435-10-00 $189.95Fits ’04~’07 Rhino 660 and ’06~’07 Rhino 450

SSV-5UG35-10-00 $182.95 Gray Hard Anodized Fits ’04~’07 Rhino 660 and ’06~’07 Rhino 450

SSV-5UG35-10-GR $215.95

10. Rear Skid PlateStrong, yet lightweight 5052-H32 aluminum construction. Helps protect rear frame section.Silver (Shown)

SSV-5UG36-00-00 $75.95Gray Hard Anodized

SSV-5UG36-00-GR $89.95

11. Drive Shaft Housing CoverStrong, yet lightweight 5052-H32 aluminum construction. Helps protect the rear final drive unit.Fits ’04~’07 Rhino 660 and ’06~’07 Rhino 450Silver (Shown)

SSV-5UG37-10-00 $101.95Gray Hard Anodized

SSV-5UG37-10-GR $118.95

7

12. Front Bumper ShieldStrong, yet lightweight 5052-H32 aluminum construction. Helps protect the front bumper while adding an aggressive look.Silver (Shown)Fits all Rhino Sport models

SSV-5B471-00-00 $169.95Fits all Rhino models (except Sport models)

SSV-5UG71-00-00 $159.95Gray Hard Anodized Fits all Rhino models (except Sport models)

SSV-5UG71-00-GR $171.95

8

9 10

11

12

RHINO®

Vehicle Protection

These accessories fit all Rhino models unless otherwise noted

VEHICLE PROTECTION

1. Baja Front Grab BarThis tough, desert-style front guard provides excellent protection and enhanced approach angle. Replaces stock front grab bar and works with the stock front bash plate. Coordinates with all Yamaha Genuine Accessories. Shown here installed in conjunction with Baja Front Bash Plate (SSV-5UG31-30-00), sold separately.Black (Shown)SSV-5UG70-11-00 $336.95BlueSSV-5UG70-11-L1 $336.95RedSSV-5UG70-11-R1 $336.95

2. NEW! Baja II Front Grab BarMade of strong steel tubing for the ultimate in protection. "Baja"-style design provides protection to the front of the machine. Features tabs for mounting accessory lighting. Works with winch. Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles. Black wrinkle finish resists scratches for long-lasting good looks. Shown here installed in conjunction with Baja II Front Bash Plate (5B4-F84C0-V0-00), sold separately.Black5B4-F84L0-V0-00 $199.95

3. Front End BraDress up the front of your Rhino with this easy-to-install cover. Made of a tough vinyl material with soft under-layer to reduce scuffing. Screenprinted Rhino logo.SSV-5UG10-20-01 $64.95

V

1TpfCh

BSBSRS

M"mWt

FB

3DcrS

1

3

2

RHINOStar Motorcycle Accessories

RHINOStar Motorcyclee Ac Accesc sories

4

5

6 7

RHINO®

Vehicle Protection

4. Front Grab Bar GuardAdds aggressive look and additional vehicle protection. Black satin powder-coated steel construction.BlackFits all Rhino Sport modelsSSV-5B473-00-00 $179.95Fits all Rhino models (except Sport models)SSV-5UG73-00-00 $99.95

5. Front Brush GuardUnique design provides protection and allows the hood to open normally. Black satin powder-coated steel construction.Black Fits ’08~’09 Rhino 700, ’04~’07 Rhino 660, and ’06~’09 Rhino 450SSV-5B478-00-00 $250.95

6. Headlight GuardsHigh-molecular-weight plastic construction provides aggressive look and protection.BlackSSV-5UG10-00-00 $59.95

7. Taillight GuardsAdhesive mount guards styled to match the Rhino Front Headlight Guards.

SSV-5UG53-30-00 $47.95

RHINO®

Vehicle Protection

These accessories fit all Rhino models unless otherwise noted

1

2

3

VEHICLE PROTECTION

1. Nerf BarsDurable steel construction with powder-coated finish. Helps provide protection for plastic side panels.Black (Shown)Fits ’08~’09 Rhino 700/ 450SSV-5B475-30-B1 $189.95Fits ’07 Rhino 660/ 450SSV-5UG75-20-00 $154.95Fits ’04~’06 Rhino 660/ 450SSV-5UG75-00-00 $154.95 BlueFits ’07~’09 Rhino 700/ 660/ 450SSV-5B475-30-L1 $154.95Red Fits ’07~’09 Rhino 700/ 660/ 450SSV-5B475-30-R1 $154.95

2. OverfendersCustom formed for front and rear. Constructed of high-density polyethylene.BlackSSV-5UG06-00-00 $194.95

3. Rear Grab BarDurable steel construction with powder-coat finish. Provides protection and additionalsupport for tailgate.Black Fits ’08~’09 Rhino 700, ’06~’07 Rhino 660, and ’06~’09 Rhino 450SSV-5UG74-10-00 $215.95 Fits ’04~’05 Rhino 660SSV-5UG74-00-00 $203.95Blue (Shown) Fits ’08~’09 Rhino 700, ’06~’07 Rhino 660, and ’06~’09 Rhino 450SSV-5UG74-10-L1 $215.95Red Fits ’08~’09 Rhino 700, ’06~’07 Rhino 660, and ’06~’09 Rhino 450SSV-5UG74-10-R1 $215.95

RHINO®

Cargo

CARGO

1. Under Seat Storage BoxThis container is made from durable plastic and fits securely beneath the driver’s seat. It includes a lift-out tote tray, and the lid is held in place with an adjustable nylon strap.

a. Fits ’04~’07 Rhino 660 and ’06~’07 Rhino 450

SSV-5UG42-20-00 $99.95

b. NEW! Fits all Rhino models

5B4-F840S-V0-00 $84.95

2. Cargo Utility BagThis heavy-duty vinyl-coated fabric bag fits across the width of the cargo bed to carry your gear. Hooks secure the top to the front edge of the cargo box, while powerful magnets secure the bottom. Rhino logo screenprinted on top surface.

SSV-5UG55-20-00 $105.95

3. Safari RackFull-sized rack with 90-pound capacity for bulkier loads. Easily mounts to the required Front Support Brace (SSV-5UG76-00-00), sold separately. Includes Rhino Spring Kit required for installation. Dealer installation recommended.Black Fits ’04~’07 Rhino 660 and ’06~’09 Rhino 450

SSV-5UG80-00-KT $349.90

4. Safari Rack ExtensionProvides extra retention to help secure loadsBlack Fits ’04~’07 Rhino 660 and ’06~’09 Rhino 450 with Safari Rack

SSV-5UG79-00-00 $108.95

5. Rhino Spring KitThese springs are 25% stiffer than the stock springs for added carrying capacity. Same springs that come with the Safari Rack. Can be also used with the Sport Rack. Front suspension use only. (Dealer installation recommended.) Will not fit Sport Edition models with piggyback shocks.Fits ’04~’07 Rhino 660 and ’06~’09 Rhino 450

SSV-5UG46-00-00 $49.95

6. Front Sport RackDesigned specifically to accommodate Deluxe Front Rack Bags. 40-pound weight limit. Easily mounts to the required Front Support Brace (SSV-5UG76-00-00), sold separately. BlackFits ’04~’07 Rhino 660 and ’06~’09 Rhino 450

SSV-5UG77-00-00 $114.95

1a 1b

2 3

4 5

6

RHINO®

Cargo

These accessories fit all Rhino models unless otherwise noted

CARGO

1. Front Support BraceCustom design allows normal hood movement for regular maintenance. Under-hood reinforcement increases stock hood rigidity. Required for mounting Front Sport Rack (SSV-5UG77-00-00) or Safari Rack (SSV-5UG80-00-KT).Fits ’04~’07 Rhino 660 and ’06~’09 Rhino 450

SSV-5UG76-00-00 $176.95

2. Deluxe Front Rack BagThe ultimate adventure bag. Features include a detachable map pocket, heavy-duty rubber handle, easy snap shoulder strap, lined interior, interior mesh pockets, and more. For use with either Safari Rack or Front Sport Rack.Fits ’04~’07 Rhino 660 and ’06~’09 Rhino 450

a. Black

ABA-30W53-30-BK $109.95

b. Realtree Hardwoods HD® Camouflage

ABA-UXX53-30-HD $119.95

3. Molded Cargo CoverConstructed of high-molecular-weight polyethylene (HMWPE). Contoured and textured design adds strength and style. Designed to complement the Molded Sun Top. Stays open with high-quality gas struts.Black

SSV-5UG16-00-00 $241.95

4. Molded Cargo CapProtect your cargo from the environment while on the trail with this sturdy, yet lightweight bed cover. Features two large access doors to the cargo bed. The cap’s access doors can easily be removed and Side Storage Boxes (SSV-5B415-10-00) can be installed. Integrated mounting points for the LED Dome Light (SSV-5B411-20-00) for increased visibility.

SSV-5B416-10-00 $269.95

5. Side Storage BoxThis tough, yet lightweight storage box can easily be installed on either side of the cargo bed or in conjunction with the Molded Cargo Cap (SSV-5B416-10-00). Tough, yet lightweight plastic construction. Integrated mounting points for LED Dome Light for increased visibility. Lockable lid latch for extra security. 40 lb. weight capacity with 8.92 gallons of storage area. Order two if Side Storage Box is desired for placement in both access openings of Molded Cargo Cap. (Single Side Storage Box shown here).

SSV-5B415-10-00 $169.95

6. Soft Cargo CoverConstructed with durable vinyl-coated fabric. Attaches with hooks and adjustable straps for a snug fit.Black (Shown)

SSV-5UG23-00-BK $67.95NEW! Realtree® AP HD™ Camouflage (matches ’08~’09 unit camo pattern)

5B4-F840N-V0-00 $74.95Realtree Hardwoods HD® Camouflage

SSV-5UG23-00-HD $69.95

C

1Cmh5F

S

T

1 2a

suF

aAbA

3C

a

B

S

4Pw

d5fv

S

2b 3

4 5

6

RHINO®

Cargo

7. Power Tilt Bed ActuatorProvides hydraulic power to lift tilt bed. Includes tilt bed actuator, switches, and connectors. Uses Wired Remote Switch from winch kit or available separately (SSV-5UG90-00-00). Requires Power Tilt Bed Mount Kit, sold separately.Fits ’04~’07 Rhino 660/450

SSV-5UG89-90-00 $723.95

8. Power Tilt Bed Mount KitMounting kit for Power Tilt Bed Actuator. Fits ’05~’07 Rhino 660/ 450

SSV-5UG89-20-00 $159.95 Fits ’04 Rhino 660

SSV-5UG89-10-00 $134.95

9. Wired Remote SwitchSame as switch included with WARN® winch.

SSV-5UG90-00-00 $67.95

10. Tailgate Liner Covers the inside of the tailgate for a finished look. Lightweight aluminum construction with durable black finish. Comes stock on ’05~’09 Rhino 700/ 660/ 450.Black Fits ’04 Rhino 660/ 450

SSV-5UG51-00-00 $80.95

11. Tailgate Hinge PlateGive the back of your Rhino a more finished look with this metal strip that covers the open hinge of the tailgate. Made of steel with black satin powder-coat finish.

SSV-5UG53-20-00 $22.95

12. Crossover Storage BoxThis heavy-duty, molded plastic tool box fits across the width of the cargo bed to carry your essential equipment. Strut that prevents the lid from closing at inopportune times. Integrated mounting points for LED Dome Light for increased visibility. Two lockable lid latches for security. 100 lb. weight capacity with 26.79 gallons of storage area.

SSV-5B452-10-00 $244.95

13. Tool BoxProvides lockable storage. Durable powder-coated aluminum diamond-plate finish. (48"L x 16"W x 11"D) Black

SSV-5UG52-10-00 $423.95

14. Side Tool Box SetDurable powder-coated aluminum diamond plate finish. Two-piece set mounts over the sides of the cargo box. (24"L x 8-1/2"W x 13"D) Black

SSV-5UG15-00-00 $455.95

7 8

9 10

11 12

13 14

6-146-14

RHINO®

Cargo & Hunting

These accessories fit all Rhino models unless otherwise noted

CARGO

1. Under-Hood Storage Boxes Made of durable high-molecular-weight polyethylene (HMWPE). Adds additional function by providing covered storage.

a. Center Fits ’04~’07 Rhino 660/450

SSV-5UG28-00-00 $53.95

b. Left Fits ’04 Rhino 660 only

SSV-5UG27-00-00 $53.95

2. Bed RailsGive the cargo bed increased function as well as a rugged look. Durable steel construction. Black (Shown)

SSV-5UG56-00-00 $123.95 Blue

SSV-5UG56-00-L1 $131.95Red

SSV-5UG56-00-R1 $131.95

3. Cargo Bed NetFour-corner adjustable tie-down style straps of rugged 1" nylon webbing. The ’04 Rhino 660/ 450 requires Bed Tie-Down Hooks (SSV-5UG53-00-00), sold separately. Black

SSV-5UG55-00-00 $59.95

4. Bed Tie-Down HooksProvides attachment points for Cargo Bed Net. Durable black powder-coated steel construction. Hooks come stock on ’05~’09 Rhino 700/ 660/ 450.Black

SSV-5UG53-00-00 $32.95

HUNTING

5. Deluxe Gun Boot Heavy-duty, impact-resistant Yamaha Gun Boot shell. Includes convenient transport bag for your rifle. Requires Gun Boot Mount Base (sold separately).

ABA-UXX67-10-00 $99.95

6. Standard Gun Boot Heavy-duty impact-resistant Yamaha Gun Boot shell with thick pile lining. Requires Gun Boot Mount Base (sold separately).

ABB-4SH67-10-00 $70.95

7. Gun Boot Mount KitRequired to mount a single Yamaha Gun Boot. Mounts to rear of cab area. Includes single gun boot mount (shown) and special boot sleeve (not shown).Fits ’08~’09 Rhino 700, ’07~’09 Rhino 450 and ’07 Rhino 660

SSV-5UG61-20-KT $205.90Fits ’04~’06 Rhino 660, ’06 Rhino 450

SSV-5UG61-00-KT $178.90

1a1b

C

1M

s

aF

SbF

S

G

B

SB

SR

S

3

nDB

S

4PboB

S

2

3 4

5 6

7

6-156-6-151

RHINO®

Hunting, Custom Body Kits & Interior/ Accents

8 98. Gun Boot Mount OptionAllows mounting of second Yamaha Gun Boot. Mounts onto Gun Boot Mount Base (sold separately). Includes single gun boot mount bracket attachment (shown) and special boot sleeve (not shown).

SSV-5UG62-00-KT $144.90

9. NEW! Rhino Storage CoverHelps protect your Rhino during storage. Not designed for trailering.Black

5B4-F81A0-V0-00 $134.95

CUSTOM BODY KITS

10. Rhino Hydrographic Body KitsThese hydrographic-process body kits are available in blue or red with a carbon-fiber look pattern. Rhino Hydrographic Body Kits include the hood, upper hood panel, and both rear fenders. These complete kits meet demanding standards for hardness, UV-resistance, chemical resistance, and adhesion to provide unmatched durability and quality.

a. Red Carbon Fiber Look

SSV-5B405-01-R1 $895.95

b. Blue Carbon Fiber Look

SSV-5B405-01-L1 $895.95

INTERIOR/ ACCENTS

11. Deluxe Seat CoversSeat cover set has a stripe in the center with Rhino logo embroidery. Full neoprene construction, except Red/ Black set which includes a fade-resistant Sur Last® fabric center section. Includes two seat covers. Black

SSV-5UG25-20-00 $192.95 Blue/ Black

SSV-5UG25-20-03 $190.95Red/ Black

SSV-5UG25-20-02 $192.95Light Gray/ Black

SSV-5UG25-20-01 $192.95

12. Seat & Headrest Cover SetTough polyester fabric construction. Includes one seat cover and one headrest cover (order two if covering both seats).

a. Hunter GreenHeadrest cover does not fit ’07~’09 models.

SSV-5UG25-00-GN $53.95

b. NEW! Realtree® AP HD™ Camouflage(matches ’08~’09 unit camo pattern)Headrest cover will fit on all Rhino models.

5B4-F470B-V0-00 $55.95

10a

11

10b

12a 12b

RHINO®

Interior/ Accents

These accessories fit all Rhino models unless otherwise noted

INTERIOR/ ACCENTS

1. Deluxe Neoprene Seat Cover SetNeoprene construction with extra padding for additional comfort. Includes one seat cover and one headrest cover. (Order two if covering both seats.)

NEW! Realtree® AP HD™ Camouflage(matches ’08~’09 unit camo pattern)Headrest cover will fit on all Rhino models.

5B4-F470B-U0-00 $96.95Realtree Hardwoods HD® Camouflage (Shown)Headrest cover does not fit ’07~’09 models.

SSV-5UG24-00-HD $96.95

2. NEW! Heated Seat Cover KitThis Heated Seat Cover Set provides both driver and passenger warmth. Seat Covers are easy to install and remove for seasonal temperature variations. Covers imply plug into the 12-volt AC adapter. The controller allows you to individualize each seat with custom heat settings that include: Pre-heat, Low, and High. Pre-heat function quickly brings seat covers up to operating temperature. Heat element shuts off automatically in 15 minutes to conserve battery. Heavy-duty black polyester construction with urethane backing. (Includes two seat covers.)

5B4-F470B-T0-00 $189.95

3. Rhino Dash TrimAdd some additional style to the dash of your Rhino with these easy to install dash trim kits. Patterns match the accessory Sport Steering Wheel Inserts (sold separately).Fits ’08~’09 Rhino 700, ’05~’07 Rhino 660, and ’07~’09 Rhino 450Brushed Aluminum (Shown)

SSV-5B442-30-A1 $84.95Carbon Fiber Look

SSV-5B442-30-C1 $84.95

4. Sport Steering WheelThe perfect accessory to complement painted accessories or custom paint. These steering wheels are color-matched to your Rhino and painted accessories. Sport Steering Wheel Inserts to complement these steering wheels available separately.Blue

SSV-5B442-40-L1 $49.95Gray

SSV-5B442-40-S1 $49.95Red

SSV-5B442-40-R1 $49.95

5. Sport Steering Wheel InsertsThese Steering Wheel Inserts work with the stock 3-spoke steering wheels on the ’07~’09 Special Edition Rhinos and with the accessory Sport Steering Wheels (shown here installed in accessory Sport Steering Wheel, sold separately).

a. Brushed Aluminum

SSV-5B442-41-A1 $26.95

b. Carbon Fiber Look

SSV-5B442-41-C1 $26.95

1Nc

N

H

RH

Tprpt

bebu

3AtaFRB

SC

S

2

3

4 5a

5b

1

RHINO®

Interior/ Accents

6. Custom Shift KnobThis custom shift knob is a great looking piece to add to any Rhino. Designed to match the Brushed Aluminum Rhino Dash Trim and Sport Steering Wheel Insert (both sold separately).Brushed Aluminum

SSV-5B442-11-A1 $44.95

7. NEW! Billet Shift KnobThis custom shift knob is a great looking piece to add to any Rhino. Designed to match other billet items. Made from CNC-machined 6061 polished billet aluminum.

5B4-E8170-V0-00 $59.95

8. NEW! Billet Light Switch This custom light switch is a great looking piece to add to any Rhino. Designed to match other billet items. Made from CNC-machined 6061 polished billet aluminum.

5B4-H25A0-V0-00 $24.95

9. NEW! Billet Brake/Throttle Pedal SetThese custom pedal covers are great looking pieces to add to any Rhino. Designed to match other billet items. Made from CNC-machined 6061 polished billet aluminum.

5B4-F721G-V0-00 $184.95

10. NEW! Whip MountThis mount can be attached to any 1-3/4" frame tube and allows you to attach a whip flag. Made of polished 6061 billet aluminum.

5B4-K750D-V0-00 $49.95

11. Cup HolderTwo-cup holder bolts to the floor in front of the engine cover, and has a removable lid for storage compartment access. Standard equipment on ’08~’09 Rhino 700 models.Fits ’04~’07 Rhino 660, ’04~’09 Rhino 450

SSV-5UG42-10-00 $131.95

12. NEW! Flashlight MountFlashlight mount features nylon straps and easyhook-and-loop attachment. Holds any standard "D-cell" battery flashlight.

5B4-K830X-V0-00 $21.95

13. NEW! Water Bottle HolderWater bottle holder features nylon straps withhook-and-loop for mounting easily to the frame tubes. Holds any standard 12~16 oz. water bottle.

5B4-K83A0-V0-00 $29.95

14. NEW! Rubber Floor MatsCustom shaped for high-quality fit. Durable Nyracord® rubber with unique "Rhino Head" logo design.

5B4-F740B-V0-00 $74.95

6 76 7

98

12

1110

13

14

RHINO®

Interior/ Accents

These accessories fit all Rhino models unless otherwise noted

INTERIOR/ ACCENTS

1. Rhino Audio SystemEnhance your adventure with this audio system specifically for Rhino. Our exclusive design has features that no other audio system in the market offers. With its speed-sensitive volume adjustment, you don’t need to reach constantly for the volume control. Volume increases automatically at high engine rpm and lowers again when engine speed goes down. Large, simple to operate backlit buttons provide an easy user interface in daytime and low light conditions. Solid- state and water-resistant construction provides for exceptional durability in the harsh Rhino environment.

Standard features include FM/AM/WB radio with AUX input for media players. Has five station presets, seek and manual tuning, and bass and treble control. Four channel, 28 watts per channel output. Includes mounting plate for audio housing and AM/FM antenna. System is XM® Satellite and iPod® input ready (these features are sold separately). The Audio Housing (SSV-5UG43-00-00), sold separately, is required for maximum system performance and protection.

SSV-5B443-10-00 $479.95

Audio HousingMount this easily installed housing under your dashboard, and install the Rhino Audio System or stereo of your choice. Includes two 6" marine-grade speakers, power leads, and a powered antenna that mounts under the hood.(Audio Housing shown above with Rhino Audio System)

SSV-5UG43-00-00 $304.95

2. XM® Satellite ModuleListen to your favorite commercial-free music, sports, news, and talk radio shows in 170 crystal-clarity channels with this XM® Satellite Radio Module that fully integrates with the Rhino Audio System. Display provides information regarding artist name, song title, and channel information. Includes module, antenna, and all connecting hardware. Subscription to XM® Satellite service required.

SSV-5B443-10-10 $429.95

3. iPod® CableListen to all your favorite tunes with this Apple® iPod® adapter for your Rhino Audio System. Allows you to play and control your iPod® through your receiver. Displays song, title, and album information. The iPod’s® battery charges while connected. Seven-wire interface to any iPod® with 30-pin interface connector. Can be used with all currently available iPod® models except the Shuffle™. (iPod® not included.)

SSV-5B443-10-15 $29.95

4. Auxiliary Input CableAllows connection of portable media player using the media player’s headphone output. (Not compatible with iPod®.)

SSV-5B443-10-16 $29.95

1EfavfhdeSe

Sftwh

Tr

S

AMa

p

S

LaXRamt

S

3L

1

2 3

4

RHINO®

Interior/ Accents, Performance and Lighting

5. Digital Meter Kit Multi-function LCD instrument panel includes function indicators (speedometer, odometer, dual trip meters, clock, and hour meter). Drive indicator lights (differential gear lock, low-range, high-range, neutral, reverse, and parking brake), and coolant temperature indicator light. Plugs into stock wiring harness for easy installation. (Digital Meter Kit is standard equipment on the ’07 Rhino 660 & ’08~’09 Rhino 700.)Fits ’04~’06 Rhino 660

5UG-W0081-00-00 $214.95Fits ’06 Rhino 450

2P5-W0081-00-00 $227.90Fits ’07~’09 Rhino 450Also includes a fuel meter.

SSV-2P581-20-00 $219.95

PERFORMANCE

6. NEW! Rhino High Elevation Clutch KitRecommended for improved acceleration and pulling-power feeling above 5000 ft. elevation. Kit includes a new clutch spring and weights. Will not affect stock clutch engagement rpm. (Dealer installation recommended). Fits ’08~’09 Rhino 700 models

SSV-5B456-30-00 $99.95

LIGHTING

7. LED Taillight with Reverse LightReplace your stock taillights with clear lenses and LEDs that provide bright red taillight and brake light function. Integrated white reverse lights.Fits ’08~’09 Rhino 700, ’05~’07 Rhino 660, ’06 Rhino 450

SSV-5UG54-40-00 $168.95

8. LED Backup LightsAuxiliary LED lights that mount to Genuine Yamaha Accessory rear bumper. Includes all required wiring and brackets to help you light up the path behind you. Must be used with Rear Bumper. (Sold separately.)Fits all ’06~’09 Rhinos

SSV-5UG54-20-00 $92.95

9. LED Dome LightThis battery-operated LED dome light provides ample light to help illuminate the cab of your Rhino. Can also easily detach and be used as an emergency light. Attaches to any non-canvas Yamaha Sun Top (some drilling may be required), Crossover Storage Box, Side Storage Box, or Molded Cargo Cap. Six high-powered LED lights offer ample lighting and run for hours on only 4-AA batteries. Large, easy-to-use ON/OFF button.

SSV-5B411-20-00 $64.95

10. SpotlightRubber-covered spotlight with easy-release mounting arm. Comes with easy-to-install strap mount.

SSV-5UG11-00-00 $86.95

5

8

76

9

10

RHINO®

Lighting & Tire Chains

These accessories fit all Rhino models unless otherwise noted

LIGHTING

1. PIAA® H6M 35W=55W Xtreme White Upgrade BulbHigh-performance halogen headlight replacement bulb. (Sold individually.)Fits ’08~’09 Rhino 700, ’04~’05 & ’07 Rhino 660, ’07~’09 Rhino 450

ABA-70023-00-00 $31.95

2. PIAA® 510 Series 35W=60W Super White Performance Lighting KitsHigh-performance 100mm (3.9") diameter round light kit. Includes lamps, wiring, and switch.Long Range Beam

ABA-73514-00-00 $233.95Wide Beam

ABA-73510-00-00 $233.95

3. PIAA® 004X Series 35W=60W Super White Performance Lighting KitsHigh-performance 60mm (2.4") diameter round light kit. Includes lamps, wiring, and switch.Long Range Beam

ABA-73462-00-00 $174.95

4. PIAA® Mounting ClampsAllows mounting of 510 series and 004X series lights to Rhino upper frame tubes. Fits both 1.5" and 1.75" diameter tube.

SSV-5UG12-00-00 $32.95

5. PIAA® Harness Extensions Allow mounting of 510 series and 004X series lights to a wider range of locations.Extra Long131" length to reach upper or rear mounting locations.

SSV-5UG13-20-00 $32.95Long 81" length to reach forward mounting locations.

SSV-5UG13-10-00 $32.95

TIRE CHAINS

6. Tire ChainsHeavy-duty steel chains help traction on snow and ice covered surfaces. (Sold in pairs.)9-Inch Fits stock Rhino front tires (25 x 8-12)

ABA-52G47-00-00 $61.9510-InchFits stock Rhino rear tires (25 x 10-12)

ABA-59V47-00-00 $68.95

L8

S

T

6Hc9F

A

L

1WH

FR

A

W

Wide Beam Pattern

Long Range Beam Pattern

1 2

3

4 5

6

DISTRIBUTED BY YAMAHARhino Accessories

Welcome to our new “Distributed by Yamaha” product line

Our product team has searched the globe to bring you easy access to the proven best accessories to bolt onto Yamaha Rhino models. We’ve formed an alliance with these exciting companies:

DG® Performance HTMoto™

PIAA® Speed Industries

WARN® Erickson Manufacturing

One® Industries AO Coolers®

DISTRIBUTED BY YAMAHARhino Accessories

1. NEW! Inner Fender GuardsAluminum alloy sheet metal construction. Designed to add protection to the footboard area from sticks, rocks, and other trail debris. Brushed finish.Fits '08~'09 Rhino 700/450

SSV-0SS56-50-02 $139.95Fits '04~'07 Rhino 660, '06~'07 Rhino 450

SSV-0SS56-50-01 $139.95

2. NEW! Coolant Reservoir Guard Aluminum Coolant Reservoir Guard helps protect the overflow coolant tank from any possible damage it could sustain out on the trails.Fits '08~'09 Rhino models

SSV-0SS56-50-03 $69.95

3. NEW! Brake Master Cylinder Guard Helps protect the reservoir from damage by rocks and debris.Fits '08~'09 Rhino 700, '04~'07 Rhino 660, '06~'09 Rhino 450

SSV-0SS56-50-04 $69.95

4. NEW! Rhino Seat CoversConstructed of high grade marine vinyl so it will stand up in the harshest of conditions. The 3/8"-foam pad-ding greatly enhances comfort while the 3D stitching provides that custom look. Top-stitched seams provide strength and a clean look. Easy “glove fit" slip-on covers for easy installation. Seat covers and headrest covers are sold separately.

a. Seat CoverSilver/BlackFits all Rhino models

SSV-0SS56-50-50 $129.95

b. Headrest CoversSilver/BlackFits all '07~'09 Rhino modelsRight Side

SSV-0SS56-50-52 $24.95Left Side

SSV-0SS56-50-51 $24.95

1 2

3

4a 4b

DISTRIBUTED BY YAMAHARhino Accessories

5. NEW! Cross Country H.I.D. Lighting KitThe smallest, most reliable ballast in the industry is a primary component of these outstanding, compact, and powerful new PIAA® H.I.D. lamps. Machined, anodized, aluminum housing, hardened glass lens, multi-surface reflector, internal ballast and igniter, and stainless fasteners. 2" diameter allows them to be mounted just about anywhere thanks to universal clamp mounts. Kit includes two lamps and pre-terminated relay/switch/wiring harness.SSV-0SS56-50-20 $574.95

6. NEW! Cross Country H.I.D. CoversThese plastic covers easily slip over the front of your PIAA® Cross Country H.I.D. lights to protect them from hazards. Covers can be used while lights are on. Avail-able in clear and amber.

a. ClearSSV-0SS56-50-24 $6.99

b. AmberSSV-0SS56-50-25 $6.99

7. NEW! 520 ATP Xtreme White Plus LampsThe ultimate off-road beam pattern, powered by PIAA's® proprietary All-Terrain Pattern (ATP) technology that delivers a beam with the perfect combination of height, width, and distance. Black stamped-steel housing with 6" glass lens. Kit includes two lamps with grilles and pre-assembled wiring harness with relay and switch.SSV-0SS56-50-21 $312.50

8. NEW! Clear Lens ProtectionExtremely durable and impact-resistant, this self-adhe-sive transparent lens protection is made of a specially formulated vinyl that is over 1/16" thick, optically clear, and race-tested to over 160 mph. Each pre-cut lamp application is highly transparent and will not alter the performance of the lens. Simply peel off backing and apply to lens. Can be used when the lights are on. Two protective covers per kit.4" for 510 SeriesSSV-0SS56-50-22 $13.506" for 520 SeriesSSV-0SS56-50-23 $19.00

9. NEW! L-Bracket Bar ClampsThese PIAA® L-Brackets are lightweight, strong, easy-to-install, and attractive. Designed to mount practically any PIAA® light to anywhere you have a bar. Available in multiple sizes. (Sold in pairs.) Black7/8"SSV-0SS56-50-26 $34.951"SSV-0SS56-50-27 $34.951-1/8"SSV-0SS56-50-28 $34.951-1/2"SSV-0SS56-50-29 $49.951-3/4" SSV-0SS56-50-30 $49.95

5

6a 6b

7 8

9

DISTRIBUTED BY YAMAHARhino Accessories

1

2

3

4a 4b

Over the years, Speed Industries has become one of the premiere Rhino accessory manufacturers in the Side x Side world. These select Rhino products are now avail-able directly through Yamaha Parts & Accessories.

1. NEW! Track Tie-Down SystemThis quick and easy system allows you to secure your cargo no matter what the shape or size. Extruded aluminum tracks allow you to place tie-down clips in 1" increments along the bed sides. Everything is included in the kit for easy installation – 2 tracks with backing plates and 2 tie-down clips. Extra tie-down clips avail-able separately.Fits all Rhino ModelsTrack System

SSV-0SS56-50-35 $89.95Tie-Down Clips (pair)

SSV-0SS56-50-36 $9.99

2. NEW! Pop-Up Tonneau CoverThe pop-up design allows for a large covered area that can be easily folded down to load/unload cargo items. The extruded aluminum frame provides strength while the durable automotive-grade black vinyl stands up to the elements.Fits all Rhino Models

SSV-0SS56-50-37 $249.95

3. NEW! Billet Center Mount MirrorThis billet mirror features precision-machined aluminum mounts and a 14" convex mirror that maximizes rear viewing. Mounts to stock roof support and can be easily adjusted to work with many driver sizes.Fits all Rhino Models

SSV-0SS56-50-38 $119.95

4. NEW! Shift KnobsThese shift knobs offer aggressive styling for a custom look. Knobs provide an excellent grip and are easy to install.Fits all Rhino Models

a. Leather with Carbon Fiber Look Insert

SSV-0SS56-50-39 $20.96

b. Leather with Mesh Insert

SSV-0SS56-50-40 $20.96

DISTRIBUTED BY YAMAHARhino Accessories

5. NEW! “Performer" Custom Steering WheelThis 12-3/4" steering wheel is wrapped in smooth leather for a great feel and a brushed aluminum finish centerpiece for a custom look. Adaptor Hub (SSV-0SS56-50-48) sold separately, required for installation.Fits all Rhino Models

SSV-0SS56-50-45 $119.95

6. NEW! “Profiler" Custom Steering WheelThis 13" steering wheel is wrapped in smooth leather for a great feel with a combination of a brushed alumi-num finish centerpiece and chrome spokes for a custom look. Adaptor Hub (SSV-0SS56-50-48) sold separately, required for installation.Fits all Rhino Models

SSV-0SS56-50-46 $119.95

7. NEW! Steering Wheel Adaptor HubPolished billet aluminum adaptor with a scalloped mounting surface and contoured design for a great look. Designed and styled to work with the Speed Industries Custom Steering Wheels.Fits all Rhino Models

SSV-0SS56-50-48 $99.99

8. NEW! Steering Column CoverThis polished stainless steel column cover is designed and styled to work with the Speed Industries Custom Steering Wheels and Adaptor Hub (SSV-0SS56-50-48). Easy to install and really finishes off your steering wheel assembly with a custom look. (Shown here with Adaptor Hub, sold separately.)Fits all Rhino Models

SSV-0SS56-50-47 $39.99

9. NEW! Billet Gas CapThis polished billet aluminum gas cap utilizes the OEM breather and seal. Notched design provides for an easy grip.Fits all Rhino Models

SSV-0SS56-50-49 $69.99

5 6

7 8

9

DISTRIBUTED BY YAMAHARhino Accessories

1. NEW! H.I.D. Rhino HeadlightsThis “plug-and-play" H.I.D. headlight upgrade kit plug directly into the stock headlight housings. H.I.D. lights produce up to 6X the light of the stock halogen bulb. 7K H.I.D. bulbs provide more light output at a reduced amperage draw, while maintaining a true 35-watt sys-tem. The electronics are fully potted for durability and are covered by the Speed Industries 2-year warranty. Everything is included in the kit for installation.Fits all '07~'09 Rhino Models

SSV-0SS56-50-41 $279.99

2. NEW! Rhino Seat Covers by Beard SeatsDurable vinyl construction with spring-loaded tension wire that secures the cover to the OE seat and provides a tight, conforming fit. 1/2"-thick foam lines the entire cover for rider comfort. Custom design features pleat-ing and custom stitching. All covers sold individually.

a. Seat CoverFits all Rhino Models

SSV-0SS56-50-42 $176.96

b. Headrest CoversFits all '07~'09 Rhino ModelsLeft Side

SSV-0SS56-50-43 $33.96Right Side

SSV-0SS56-50-44 $33.96

Winch & Plow Accessories

3. NEW! 2' Plow MarkersThese 2' high antennae are constructed of flexible mate-rial to withstand impact. Markers have red rubber tips for increased visibility; these clearly mark the edges of your plow blade even in deep snow. (Sold in pairs).

GYT-0SS56-00-01 $29.95

4. NEW! Synthetic 8' Plow Lift RopeThis 8' section of durable synthetic rope can temporar-ily replace your wire winch rope for the plow season; saving wear and tear on the wire winch rope. It stands up to repeated sharp angle pulls used to lift heavy plows and works on all aluminum drum WARN® ATV winches.

GYT-0SS56-00-02 $39.95

5. NEW! Wireless Winch Remote ControlA quick and easy-to-install upgrade to your WARN® winch that allows you to operate your winch from any-where within a 50' radius. Antenna is integrated into the wire harness. Remote has large, easy-to-use power-in and power-out buttons. System automatically shuts off after 3 minutes. Handlebar holster is included.

GYT-0SS56-00-05 $174.95

1 2a

2b

43

5

DISTRIBUTED BY YAMAHARhino Accessories

6. NEW! Synthetic Winch RopeThis synthetic winch rope is as strong as steel cable, easy to handle, reduces weight, and will not stretch. For use with all WARN® ATV winch kits with aluminum drums. Includes a 3' rock guard sleeve.

GYT-0SS56-00-06 $119.95

7. NEW! 54" Plastic Wear BarConstructed of ¾"-thick ultra high molecular weight (UHMW) plastic for increased durability and wear. Excellent for use on concrete and brick surfaces, and it's reversible, so it can simply be flipped over once it becomes worn on one side.

GYT-0SS56-00-03 $49.95

8. NEW! Snow Control FlapFlap controls snow kick back; aiding in the plowing pro-cess. Constructed of flexible rubber material that stays pliable in cold weather. One size fits all plows (cut to size) and requires drilling of the plow blade to install.

GYT-0SS56-00-04 $49.95

9. NEW! Neoprene Winch CoverThis cover fits all 2500 lb.-3000 lb. WARN® winches. Made of durable, tight-fitting neoprene that resists wear and cracking. Provides tremendous protection for the winch.

GYT-0SS56-00-07 $39.95

10. NEW! Winching Accessory KitKit includes two tree trunk protectors that provide secure anchor points and help you to secure the load you're pulling, two shackles designed for ATV and Side x Side rigging while using the winch, and a snatch block that assists in double-line and angled pulls. Kit allows you to change your pulling direction and double your pulling power.

GYT-0SS56-00-08 $109.95

11. NEW! Heavy-Duty Retractable Ratcheting Tie-DownsErickson's patented design is the next step up in the tie-down industry. Simple to operate – simply pull the web out to the desired length and start ratcheting until tight. To release, simply push down on the red release button. The web not being used is stored in the center housing so you have no web blowing in the wind. This feature also keeps the straps clean and free from oil and dirt. 1" tie-down is rated at 1500 lb. with a WLL (Work Load Limit) of 500 lb. and the 2" model is rated at 4000 lb. with a WLL of 1333 lb. (Sold in pairs.)1"x 6'

ACC-0SS58-40-17 $26.952"x 6'

ACC-0SS58-40-18 $44.95

6 7

8 9

10 11

DISTRIBUTED BY YAMAHARhino Accessories

1. NEW! Rhino Graphic KitsThese graphic kits allow riders to easily personalize their Rhino. Kit graphics are made of a durable 15mm vinyl material with 3M™ adhesive that provides additional protection to the body panels. Kits include hood and rear fender decals.

a. Black

SSV-0SS56-50-54 $119.95

b. Blue

SSV-0SS56-50-55 $119.95

c. Green

SSV-0SS56-50-53 $119.95

2. NEW! Soft-Sided CoolersThese soft-sided coolers are constructed of 1000D polyester vinyl and 18-oz. vinyl-coated polyester that is heat-resistant up to 175° and has a crack temperature of -60°. ¾" high density closed-cell insulation keeps ice lon-ger than competitors' coolers. Eyehook fasteners on each corner allow for easy attachment to any size rack or to the hooks in the cargo bed of the Rhino. Coolers are UV-protected, have anti-mildew properties and easy-to-clean surface, plus 375-lb. tear resistance. Coolers feature a white screened Yamaha logo. Available in black or blue and in two different sizes.

36-Can Capacity CoolerBlack

GYT-0SS58-40-03 $74.95Blue (Shown)

GYT-0SS58-40-02 $74.95

12-Can Capacity CoolerBlack (Shown)

GYT-0SS58-40-05 $49.95Blue

GYT-0SS58-40-04 $49.95

1a

1b

1c

2