VINTAGE MODEL AIRPLANE - ASSEMBLY INSTRUCTIONS

This item is intended for decorative use only. This is not a toy.

PARTS INCLUDED:

(1) Wall Anchor (1 PC.)

(2) Wall Screw (1 PC.)

ASSEMBLY INSTRUCTIONS:

1. Carefully remove all parts from the box, and remove all plastic coverings.

2. Lay all parts on a soft surface to avoid damaging the finish.

3. Drill a hole into the wall that aligns with the hole on the back of the airplane body, and insert wall anchor (1).

4. Screw wall screw (2) into anchor, and slide airplane body onto screw.

5. Installation is complete.

LARGE: (N.W.: about 3 lbs.) MEDIUM: (N.W.: about 2 lbs.) SMALL: (N.W.: about 2 lbs.)

CARE INSTRUCTIONS:

1. To clean, use a soft dry or damp cloth.

2. Do not use abrasive cleansers, chemical cleaners or metal polishes. The metal body has a protective lacquer finish that

could be damaged by chemicals or abrasive cleaning agents.

NO. ITEM DESCRIPTION QTY.

1

Wall Anchor 1 PC.

2 Wall Screw 1 PC.