4
Drive Technology \ Drive Automation \ System Integration \ Services Revision to Manual 11335114 Edition 04/2005 MOVIDRIVE ® MDX61B "Extended Bus Positioning" Application Edition 01/2012 19413610 / EN

Revision to Manual 11335114 Edition 04/2005Part number 11335114 / EN, edition 04/2005 • Only electrical specialists are allowed to perform installation and startup observing relevant

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Revision to Manual 11335114 Edition 04/2005Part number 11335114 / EN, edition 04/2005 • Only electrical specialists are allowed to perform installation and startup observing relevant

Drive Technology \ Drive Automation \ System Integration \ Services

Revision toManual 11335114Edition 04/2005

MOVIDRIVE® MDX61B"Extended Bus Positioning" Application

Edition 01/2012 19413610 / EN

Page 2: Revision to Manual 11335114 Edition 04/2005Part number 11335114 / EN, edition 04/2005 • Only electrical specialists are allowed to perform installation and startup observing relevant

2

1 stallation

MOVIDRIVE® MDX61B Extended Bus Positioning Application1 Installation

INFORMATION• This revision refers to chapter 4.2 "Wiring diagram MOVIDRIVE® MDX61B" in the

following manual:"MOVIDRIVE® MDX61B Extended Bus Positioning Application", Part number 11335114 / EN, edition 04/2005

• Only electrical specialists are allowed to perform installation and startupobserving relevant accident prevention regulations and the MOVIDRIVE®

MDX60B/61B operating instructions as well as the "MOVIDRIVE® MDX61BExtended Bus Positioning Application" manual.

In

Revision – MOVIDRIVE® MDX61B Extended Bus Positioning Application

Page 3: Revision to Manual 11335114 Edition 04/2005Part number 11335114 / EN, edition 04/2005 • Only electrical specialists are allowed to perform installation and startup observing relevant

1Wiring diagram for MOVIDRIVE® MDX61BInstallation

1.1 Wiring diagram for MOVIDRIVE® MDX61BThe following figure replaces figure 6: Wiring diagram for MOVIDRIVE® MDX61B withDEH11B or DER11B option.

The original figure included incorrect pin designations on X14 and X15.

X14:

DEH11B DER11B

X15:

TF1DGNDDBØØ

DOØ1-CDOØ1-NODOØ1-NC

DOØ2VO24VI24

DGND

123456789

10

MOVIDRIVE MDX61B®

X13:

X10:

DIØØDIØ1DIØ2DIØ3DIØ4DIØ5

DCOMVO24DGNDST11ST12

123456789

1011 RS485 -

RS485 +

= +-24 V

19

815

1

815

9 16

59

15

1

8

9

X12:DGNDSC11SC12

123SB

us

Reference potential for binary signals

Enable/stop/Controller inhibit

Reference X13:DIØØ...DIØ5

Reference potential for binary signals

Reference potential for binary signalsDC+24 V input

TF/TH input

Relay contact ready

Normally closed contact relayNormally open contact relay

/Brake

/Fault

DC+24 V output

DC+24 V output

External encoder input (HIPERFACE®, sin/cosor DC 5 V TTL) or X14-X14 connection

(connection: MOVIDRIVE® MDX60B/61B operating instructions)

Motor encoder:With DEH11B: HIPERFACE®, sin/cos or DC 5 V TTLWith DER11B: Resolver 6-pole, AC 3.5 Veff 4 kHz

(connection: MOVIDRIVE® MDX60B/61B operating instructions)

ResetReference cam

System bus referenceSystem bus highSystem bus low

/Limit switch right/Limit switch left

4986441227

Revision – MOVIDRIVE® MDX61B Extended Bus Positioning Application

3
Page 4: Revision to Manual 11335114 Edition 04/2005Part number 11335114 / EN, edition 04/2005 • Only electrical specialists are allowed to perform installation and startup observing relevant

SEW-EURODRIVE—Driving the world

SEW-EURODRIVEDriving the world

www.sew-eurodrive.com

SEW-EURODRIVE GmbH & Co KGP.O. Box 3023D-76642 Bruchsal/GermanyPhone +49 7251 75-0Fax +49 7251 [email protected]