Upload
ngokhue
View
240
Download
6
Embed Size (px)
Citation preview
8- Port Fast Ethernet Reverse PoE Switch
Reverse PoE with PoE OUT (24V)
Reverse PoE Technology
Reverse PoE with Fiber Port
POWER OVER ETHERNET FEATURE Switch has intelligent Power management feature solving a major problem of powering the device for ISPs. This
switch can be powered using Remote Power from customer end using specially designed reliable NETMODEM
from us or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the need to arrange for power at
building top and no UPS is needed / no money to be paid to society/power providing customer. This saves lot of
MONEY for ISPs and improves service delivery with uninterrupted service to the customer.
DESCRIPTION
Model IC-1080 is 8 Port 10/100Mbps Switch which is latest generation of fast Ethernet switching technology. It
contains 7 Downlink 10/100Base-TX ports (Reverse PoE Ports) plus one UPLINK 10/100BaseT Port (PoE OUT
Port, 24V) (Other PoE OUT Voltage available 12V, 48V).
Model IC-1071F is 8 Port 10/100Mbps Switch which is latest generation of fast Ethernet switching technology. It
contains 7 Downlink 10/100Base-TX ports (Reverse PoE Port) plus one UPLINK 100BaseFX Port (Single Mode,
Single Fiber (Bidirectional), 20km, SC Connector)
The Switch uses store-and-forward switching to ensure maximum data integrity. The switch supports auto
sensing, Auto-Negotiation and IEEE 802.3x Flow Control standard which eliminate packet loss in heavy traffic
conditions. All ports also support auto MDI/MDI-X feature, eases the selection of cable type for devices
connectivity and provide a completely flexible high performance Non-blocking full wire speed solution. Switch
also offers Port Isolation/ Port based VLAN, priority and Broadcast Storm Control features.
SMART Traffic Management Features The management features include port-based VLAN/Port Isolation (Can be enabled/Disabled using DIP Switch) port security. It also has limited priority feature for providing priority to traffic from three user ports (Port 1,2,3 : Enabled/Disabled using DIP Switch). Switch also supports Broadcast storm control by providing
a DIP switch to enable / disable the same.
VLAN / Port Isolation
Switch works on Intelligent Power Management Feature (IPM), IPM enable switch to source power from
customer’s Net modem. (Sourced from us or any standard PoE Injector (12V to 24V DC)) under reverse PoE Technology and this eliminates need of any external source for electricity /UPS/Power Providing by Customer.
This saves money and creates convenience to the operator (ISP) with uninterrupted service to the customer.
Supports Auto-Negotiation Each of the Switch’s ports automatically detect whether connected network devices are running at 10Mbps or
100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and
hassle-free operation.
Supports Non-Blocking Wire Speed The Switch forwards and receives traffic seamlessly with its non-blocking wire-speed. Every port of the Switch
supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected
devices and allowing you to run a high speed network smoothly.
IEEE Energy Efficient Ethernet (EEE) Compliance Along with the Fast Ethernet speeds critical for next-generation network applications, the StarIntelliConnect
Series switch offers environmental efficiency. To comply with the IEEE802.3az standard, the Switch provides
power saving functionality to reduce energy consumption and save costs:
Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature
automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to
the link status and the number of active network devices.
Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables and adjust
power usage accordingly. The shorter the cable length, the less power it consumes.
Easy to Use The Switch IC-10XX is plug-and-play and supports a wide range of network protocols. Installation and network
management is quick and straightforward, and clear and convenient LED indicators display easy to read port
and switch status.
FEATURES & TECHNICAL SPECIFICATIONS
Number of Port 8 Port * ( 7 Reverser Poe Port & 1 PoE Out and
1 Fiber Port Out) Depends on Model Ordered
Standards IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex;
IEEE Std. 802.3u 100BASE-TX, 10/100Mbps, Half/Full
Duplex; IEEE Std. 802.3x Flow control and Back-pressure.
Supports APS, auto-power saving while link-off IEEE 802.3az
protocol based power saving PWD, force-off power
Saving
Vlan Port-based VLAN(Can be enabled/ Disabled using
DIP Switch)
Protocols CSMA/CD
Technology Store-and-forward architecture filters fragment
& CRC error packets
MAC Address 1K MAC address
Network Cable 4-pair UTP/STP Cat 5 cable
LEDs Power over Ethernet - IN Injector: Power Supply (IN) for Switch No. Of Ethernet Ports that can Power ON
the Switch
Power OUT to external compatible PoE device Ethernet Devices that can be powered
CAT-5 Cable Data Lines
CAT-5 Cable Power Lines Power consumption
Operating Temperature
Storage environment
Operating Humidity
Link/Activity per Ethernet port Power: On/Off for Switch
Power over Ethernet 24V @ 24W on Spare Pair
(to supply power to the switch as well as a compatible PoE device (e.g.CPE)).
Anyone/All of the seven Downlink Ports
Voltage: 8V-24V (On Spare Pair of Uplink Port) Max Power: 18W
Single/Dual*
Pair 1: Pins 1/2 , Pair 2: Pins3/6
,+ VDC: Pins 4/5 , -VDC: Pins 7/8 2 Watt (For Switch)
0° to 50°C
0° to 75°C 10% to 90% (non-condensing)
*Depends of Model Ordered
NETWORK SETUP DIAGRAM
IC - 1080
IC - 1071F
ORDERING INFORMATION
IC-1080 IC-1080P IC-1080-12V IC-1080-12VP IC-1071F
IC-1071FP
7x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T PoE Out Port 6x10/100 Base T Reverse PoE (RPoE) & 2 x 10/100 Base T PoE Out Port 7x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T Port & 12V DC Power out 7x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T PoE Out & 12V DC Power out 7x10/100 Base Reverse PoE (RPoE) & 1 x 10/100 Base FX Port
/13T for 1310nmTX - 1550nmRX, /15T for 1550nmTX - 1310nmRX
6x10/100 Base T Reverse PoE (RPoE) & 1 x 10/100 Base T
PoE Out Port & 1 x 10/100 Base FX Port
/13T for 1310nmTX - 1550nmRX, /15T for 1550nmTX - 1310nmRX
+91 968 768 8965 [email protected] 079 - 26764812
www.megastar.in A/2, Satellite Apartment, Nr. Kameshwar school, Jodhpur Cross
Road, Satellite - Ahmedabad, Gujarat 380015. India