Upload
hangoc
View
217
Download
0
Embed Size (px)
Citation preview
/ 60°C
P=1.5
bar -
KQ/IS
O 174
84-1
- KQ I
SO/D
IS 18
225 -
UV RE
SIST/U
SE ON
LY W
ITH EM
METI
FITTIN
GS/U
SAR C
OM CO
NEXÕ
ES EM
METI
- Mad
e in I
taly
Sistema Gaspex
Gaspex è il sistema Emmeti in tubi multistrato e raccordi in ottone per la realizzazione di impianti
adduzione gas naturale o GPL, certificato secondo le norme UNI 11344 e ISO 17484, e conforme
alla norma AS 4176.8.
Il tubo multistrato versione UV protected è certificato secondo le norme ISO 17484 e ISO/DIS 18225.
ll sistema è costituito da una gamma completa di tubi multistrato in PE-Xb/AL/PE-Xb, forniti in rotoli
e in barre, di raccordi a pressare e dalle relative attrezzature; l’offerta è completata da una serie di
accessori e componenti specifici quali:
Guaina corrugata, collettori gas, valvole gas sottointonaco, scatole da incasso, ....
Le attrezzature (calibratori, pinze, pressatrici) sono in comune con il sistema Gerpex per impianti acqua.
Gaspex SystemGaspex is the Emmeti multi-layer pipe system and brass fittings for natural gas or LPG infeed systems,
certified according to Standards UNI 11344 and ISO 17484, and complies to AS 4176.8.
Multilayer pipe UV protected version is certified according to Standards ISO 17484 and ISO/DIS 18225.
The system consists of a complete range of multi-layer pipes in PE-Xb/AL/PE-Xb, supplied as rolls or
bars, push-in fittings and relative equipment; the offer is completed by a set of specific accessories
and components such as:
Corrugated sheath, gas manifolds, concealed gas valves, built-in boxes, ....
The equipment (calibrators, clamps, presses) is suitable for the Gerpex system for water installations.
Conformità / Conformity
I d e a s t o i n s t a l l
Heating & Plumbing
GERPEX/GASPEXSistemi multistrato per acqua e gasMulti-layer systems for water and gas IT/GB 02
EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - ItaliaTel. +39 0434 567911 - Fax +39 0434 567901 - www.emmeti.com - [email protected]
Rispetta l’ambiente!Per il corretto smaltimento, i diversi materiali devono essere separati e conferiti secondo la normativa vigente.
Respect the environment!For proper disposal, the different materials should be separated and disposed of according to the regulations in force.
Copyright EmmetiTutti i diritti sono riservati. Nessuna parte della pubblicazione può essere riprodotta o diffusa senza il permesso scritto da Emmeti.
Copyright EmmetiAll rights reserved. No part of this publication may be reproduced or disclosed to third parties without the written consent of Emmeti.
I dati contenuti in questa pubblicazione possono subire modifiche ritenute necessarie per il miglioramento del prodotto.The data contained in this publication is subject to change as deemed necessary to improve the product.
Esempio di installazione / Example of installation
Rev.
A -
06.2
016
- Uffi
cio
Pubb
licità
& Im
mag
ine
- BT
99
00
91
70
00
00
1
EMME
TI GA
SPEX
PEXb
/AL/PE
Xb 16
x2 -
11344
MOP
0.5 GA
S T=-2
0°C / 7
0°C-KQ
ISO 1
7484-1
MOP
5 GAS
GN/GL
P T=-2
0°C / 6
0°C AS
4176.
8 GAS
MOP
500kP
a - Cl
ass 5
00 Ma
de in
Italy h
h:mm
gg/m
m/aa
lotto
mtr m
Sistema Gerpex
Gerpex è il sistema di Emmeti moderno ed efficiente per la realizzazione
di impianti termici e sanitari mediante l’impiego di tubi multistrato, realizzati
in polietilene reticolato ed alluminio, e speciali raccordi.
I raccordi sono disponibili in due diverse soluzioni:
a pressare e a stringere.
L’ampia gamma di raccordi e le diverse possibilità
di fissaggio rendono il Sistema Gerpex un prodotto altamente
affidabile e completo.
Il Sistema Gerpex è adatto alla realizzazione di:
– Impianti di riscaldamento ad acqua calda;
– Impianti di condizionamento ad acqua refrigerata;
– Impianti idrici/sanitari;
– Impianti per aria compressa.
Gerpex System
Gerpex is the cutting-edge and high performance system manufactured
by Emmeti for thermal and DHW installations by means of multi-layer pipe,
made in PEX and aluminium, and special fittings.
The fittings are available in two versions:
Press or compression fittings.
The broad range of fittings and the various fastening
possibilities make the Gerpex System a highly reliable and
complete product.
The Gerpex System is suitable for making:
– Hot water heating systems;
– Water-cooled air conditioning systems;
– Water/DHW systems;
– Compressed air systems.
Conformità / Conformity
Esempi di installazione / Examples of installation
I vantaggi di un sistema completo The benefits of a complete system
Elevata resistenza alle alte temperature
Elevata resistenza alla pressione
Contenuta dilatazione lineare
Isolamento termico
Basse perdite di carico
Possibilità di adottare elevate velocità dell’acqua
Resistenza agli schiacciamenti e alle abrasioni
Impermeabilità all’ossigeno
Resistenza agli agenti chimici esterni
Inattaccabilità dalle corrosioni elettrochimiche
Peso ridotto e rapidità d’installazione
Ultra resistent to high temperatures
High resistance to corrosion
Reduced linear expansion
Thermal insulation
Low pressure drops
Suitable for high water flow rates
Resistant to crushing and abrasion
Oxygen impermeable
Resistant to external chemical agents
Resistant to electrochemical corrosion
Reduced weight and fast setup
Distribuzione a collettore
Manifold-type distribution
Distribuzione in derivazione a Tee
Tee junction distribution
Distribuzione in serie a parete
Wall-mounted series distribution
Sistema Gerpex
Gerpex è il sistema di Emmeti moderno ed efficiente per la realizzazione
di impianti termici e sanitari mediante l’impiego di tubi multistrato, realizzati
in polietilene reticolato ed alluminio, e speciali raccordi.
I raccordi sono disponibili in due diverse soluzioni:
a pressare e a stringere.
L’ampia gamma di raccordi e le diverse possibilità
di fissaggio rendono il Sistema Gerpex un prodotto altamente
affidabile e completo.
Il Sistema Gerpex è adatto alla realizzazione di:
– Impianti di riscaldamento ad acqua calda;
– Impianti di condizionamento ad acqua refrigerata;
– Impianti idrici/sanitari;
– Impianti per aria compressa.
Gerpex System
Gerpex is the cutting-edge and high performance system manufactured
by Emmeti for thermal and DHW installations by means of multi-layer pipe,
made in PEX and aluminium, and special fittings.
The fittings are available in two versions:
Press or compression fittings.
The broad range of fittings and the various fastening
possibilities make the Gerpex System a highly reliable and
complete product.
The Gerpex System is suitable for making:
– Hot water heating systems;
– Water-cooled air conditioning systems;
– Water/DHW systems;
– Compressed air systems.
Conformità / Conformity
Esempi di installazione / Examples of installation
I vantaggi di un sistema completo The benefits of a complete system
Elevata resistenza alle alte temperature
Elevata resistenza alla pressione
Contenuta dilatazione lineare
Isolamento termico
Basse perdite di carico
Possibilità di adottare elevate velocità dell’acqua
Resistenza agli schiacciamenti e alle abrasioni
Impermeabilità all’ossigeno
Resistenza agli agenti chimici esterni
Inattaccabilità dalle corrosioni elettrochimiche
Peso ridotto e rapidità d’installazione
Ultra resistent to high temperatures
High resistance to corrosion
Reduced linear expansion
Thermal insulation
Low pressure drops
Suitable for high water flow rates
Resistant to crushing and abrasion
Oxygen impermeable
Resistant to external chemical agents
Resistant to electrochemical corrosion
Reduced weight and fast setup
Distribuzione a collettore
Manifold-type distribution
Distribuzione in derivazione a Tee
Tee junction distribution
Distribuzione in serie a parete
Wall-mounted series distribution
Sistema Gerpex
Gerpex è il sistema di Emmeti moderno ed efficiente per la realizzazione
di impianti termici e sanitari mediante l’impiego di tubi multistrato, realizzati
in polietilene reticolato ed alluminio, e speciali raccordi.
I raccordi sono disponibili in due diverse soluzioni:
a pressare e a stringere.
L’ampia gamma di raccordi e le diverse possibilità
di fissaggio rendono il Sistema Gerpex un prodotto altamente
affidabile e completo.
Il Sistema Gerpex è adatto alla realizzazione di:
– Impianti di riscaldamento ad acqua calda;
– Impianti di condizionamento ad acqua refrigerata;
– Impianti idrici/sanitari;
– Impianti per aria compressa.
Gerpex System
Gerpex is the cutting-edge and high performance system manufactured
by Emmeti for thermal and DHW installations by means of multi-layer pipe,
made in PEX and aluminium, and special fittings.
The fittings are available in two versions:
Press or compression fittings.
The broad range of fittings and the various fastening
possibilities make the Gerpex System a highly reliable and
complete product.
The Gerpex System is suitable for making:
– Hot water heating systems;
– Water-cooled air conditioning systems;
– Water/DHW systems;
– Compressed air systems.
Conformità / Conformity
Esempi di installazione / Examples of installation
I vantaggi di un sistema completo The benefits of a complete system
Elevata resistenza alle alte temperature
Elevata resistenza alla pressione
Contenuta dilatazione lineare
Isolamento termico
Basse perdite di carico
Possibilità di adottare elevate velocità dell’acqua
Resistenza agli schiacciamenti e alle abrasioni
Impermeabilità all’ossigeno
Resistenza agli agenti chimici esterni
Inattaccabilità dalle corrosioni elettrochimiche
Peso ridotto e rapidità d’installazione
Ultra resistent to high temperatures
High resistance to corrosion
Reduced linear expansion
Thermal insulation
Low pressure drops
Suitable for high water flow rates
Resistant to crushing and abrasion
Oxygen impermeable
Resistant to external chemical agents
Resistant to electrochemical corrosion
Reduced weight and fast setup
Distribuzione a collettore
Manifold-type distribution
Distribuzione in derivazione a Tee
Tee junction distribution
Distribuzione in serie a parete
Wall-mounted series distribution
/ 60°C
P=1.5
bar -
KQ/IS
O 174
84-1
- KQ I
SO/D
IS 18
225 -
UV RE
SIST/U
SE ON
LY W
ITH EM
METI
FITTIN
GS/U
SAR C
OM CO
NEXÕ
ES EM
METI
- Mad
e in I
taly
Sistema Gaspex
Gaspex è il sistema Emmeti in tubi multistrato e raccordi in ottone per la realizzazione di impianti
adduzione gas naturale o GPL, certificato secondo le norme UNI 11344 e ISO 17484, e conforme
alla norma AS 4176.8.
Il tubo multistrato versione UV protected è certificato secondo le norme ISO 17484 e ISO/DIS 18225.
ll sistema è costituito da una gamma completa di tubi multistrato in PE-Xb/AL/PE-Xb, forniti in rotoli
e in barre, di raccordi a pressare e dalle relative attrezzature; l’offerta è completata da una serie di
accessori e componenti specifici quali:
Guaina corrugata, collettori gas, valvole gas sottointonaco, scatole da incasso, ....
Le attrezzature (calibratori, pinze, pressatrici) sono in comune con il sistema Gerpex per impianti acqua.
Gaspex SystemGaspex is the Emmeti multi-layer pipe system and brass fittings for natural gas or LPG infeed systems,
certified according to Standards UNI 11344 and ISO 17484, and complies to AS 4176.8.
Multilayer pipe UV protected version is certified according to Standards ISO 17484 and ISO/DIS 18225.
The system consists of a complete range of multi-layer pipes in PE-Xb/AL/PE-Xb, supplied as rolls or
bars, push-in fittings and relative equipment; the offer is completed by a set of specific accessories
and components such as:
Corrugated sheath, gas manifolds, concealed gas valves, built-in boxes, ....
The equipment (calibrators, clamps, presses) is suitable for the Gerpex system for water installations.
Conformità / Conformity
I d e a s t o i n s t a l l
Heating & Plumbing
GERPEX/GASPEXSistemi multistrato per acqua e gasMulti-layer systems for water and gas IT/GB 02
EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - ItaliaTel. +39 0434 567911 - Fax +39 0434 567901 - www.emmeti.com - [email protected]
Rispetta l’ambiente!Per il corretto smaltimento, i diversi materiali devono essere separati e conferiti secondo la normativa vigente.
Respect the environment!For proper disposal, the different materials should be separated and disposed of according to the regulations in force.
Copyright EmmetiTutti i diritti sono riservati. Nessuna parte della pubblicazione può essere riprodotta o diffusa senza il permesso scritto da Emmeti.
Copyright EmmetiAll rights reserved. No part of this publication may be reproduced or disclosed to third parties without the written consent of Emmeti.
I dati contenuti in questa pubblicazione possono subire modifiche ritenute necessarie per il miglioramento del prodotto.The data contained in this publication is subject to change as deemed necessary to improve the product.
Esempio di installazione / Example of installation
Rev.
A -
06.2
016
- Uffi
cio
Pubb
licità
& Im
mag
ine
- BT
99
00
91
70
00
00
1
EMME
TI GA
SPEX
PEXb
/AL/PE
Xb 16
x2 -
11344
MOP
0.5 GA
S T=-2
0°C / 7
0°C-KQ
ISO 1
7484-1
MOP
5 GAS
GN/GL
P T=-2
0°C / 6
0°C AS
4176.
8 GAS
MOP
500kP
a - Cl
ass 5
00 Ma
de in
Italy h
h:mm
gg/m
m/aa
lotto
mtr m
/ 60°C
P=1.5
bar -
KQ/IS
O 174
84-1
- KQ I
SO/D
IS 18
225 -
UV RE
SIST/U
SE ON
LY W
ITH EM
METI
FITTIN
GS/U
SAR C
OM CO
NEXÕ
ES EM
METI
- Mad
e in I
taly
Sistema Gaspex
Gaspex è il sistema Emmeti in tubi multistrato e raccordi in ottone per la realizzazione di impianti
adduzione gas naturale o GPL, certificato secondo le norme UNI 11344 e ISO 17484, e conforme
alla norma AS 4176.8.
Il tubo multistrato versione UV protected è certificato secondo le norme ISO 17484 e ISO/DIS 18225.
ll sistema è costituito da una gamma completa di tubi multistrato in PE-Xb/AL/PE-Xb, forniti in rotoli
e in barre, di raccordi a pressare e dalle relative attrezzature; l’offerta è completata da una serie di
accessori e componenti specifici quali:
Guaina corrugata, collettori gas, valvole gas sottointonaco, scatole da incasso, ....
Le attrezzature (calibratori, pinze, pressatrici) sono in comune con il sistema Gerpex per impianti acqua.
Gaspex SystemGaspex is the Emmeti multi-layer pipe system and brass fittings for natural gas or LPG infeed systems,
certified according to Standards UNI 11344 and ISO 17484, and complies to AS 4176.8.
Multilayer pipe UV protected version is certified according to Standards ISO 17484 and ISO/DIS 18225.
The system consists of a complete range of multi-layer pipes in PE-Xb/AL/PE-Xb, supplied as rolls or
bars, push-in fittings and relative equipment; the offer is completed by a set of specific accessories
and components such as:
Corrugated sheath, gas manifolds, concealed gas valves, built-in boxes, ....
The equipment (calibrators, clamps, presses) is suitable for the Gerpex system for water installations.
Conformità / Conformity
I d e a s t o i n s t a l l
Heating & Plumbing
GERPEX/GASPEXSistemi multistrato per acqua e gasMulti-layer systems for water and gas IT/GB 02
EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - ItaliaTel. +39 0434 567911 - Fax +39 0434 567901 - www.emmeti.com - [email protected]
Rispetta l’ambiente!Per il corretto smaltimento, i diversi materiali devono essere separati e conferiti secondo la normativa vigente.
Respect the environment!For proper disposal, the different materials should be separated and disposed of according to the regulations in force.
Copyright EmmetiTutti i diritti sono riservati. Nessuna parte della pubblicazione può essere riprodotta o diffusa senza il permesso scritto da Emmeti.
Copyright EmmetiAll rights reserved. No part of this publication may be reproduced or disclosed to third parties without the written consent of Emmeti.
I dati contenuti in questa pubblicazione possono subire modifiche ritenute necessarie per il miglioramento del prodotto.The data contained in this publication is subject to change as deemed necessary to improve the product.
Esempio di installazione / Example of installation
Rev.
A -
06.2
016
- Uffi
cio
Pubb
licità
& Im
mag
ine
- BT
99
00
91
70
00
00
1
EMME
TI GA
SPEX
PEXb
/AL/PE
Xb 16
x2 -
11344
MOP
0.5 GA
S T=-2
0°C / 7
0°C-KQ
ISO 1
7484-1
MOP
5 GAS
GN/GL
P T=-2
0°C / 6
0°C AS
4176.
8 GAS
MOP
500kP
a - Cl
ass 5
00 Ma
de in
Italy h
h:mm
gg/m
m/aa
lotto
mtr m