Embed Size (px)
Citation preview
RETR ACTION N OTE
Retraction Note: Surface modification of aramid fiberswith novel chemical approach
Tie-Min Liu • Yuan-Suo Zheng • Jie Hu
Published online: 8 June 2012
� Springer-Verlag 2012
Retraction Note: Polym. Bull. (2011) 66:259–275DOI 10.1007/s00289-010-0313-y
This article has been retracted at the request of the editor because substantial parts
were previously published in Journal of Applied Polymer Science 118, 2541 (2010).
The online version of the original article can be found under doi:10.1007/s00289-010-0313-y.
T.-M. Liu (&)
School of Material Science and Engineering, Xi’an Jiao Tong University, Xi’an,
Shaanxi 710049, People’s Republic of China
e-mail: [email protected]
Y.-S. Zheng � J. Hu
School of Science, Xi’an Jiao Tong University, Xi’an, Shaanxi 710049, People’s Republic of China
123
Polym. Bull. (2012) 69:509
DOI 10.1007/s00289-012-0769-z
![State-of-the-art of fiber-reinforced polymers in additive ... · Aramid fibers were used in [25] describedin section 4.5. Vapor-grown carbon fibers (VGCF) were used in [26] mixed](https://img.dokumen.tips/doc/110x75/5e7d384e1d065218ff1397bc/state-of-the-art-of-fiber-reinforced-polymers-in-additive-aramid-fibers-were.jpg)
