Embed Size (px)
Citation preview
Wavefoil delivers retractable bow foils that reduce fuel consumption and ship motions in waves. Fuel saving for suitable ships is in the range of 5-15%, while ship motions are reduced by 10-20%, and up to 30% for high-speed vessels.
Our unique and patent-pending retraction mechanism allows the foils to be retracted vertically, thus allowing the foil module to be placed far forward in the bow, where the benefit of the foils is the greatest.
Wavefoil delivers complete foil modules including hydraulic or electric motor, control system and bridge panel.
Retractable bow foils
Model tests with Havila Kystruten.
Bearings and thrust washers are made of a composite material and do not need any maintenance. All movable parts are available from a platform above the waterline for inspection when the foils are retracted.
5-15%
Our foil module, the WF3970, in an explorer cruise vessel designed by Naval Dynamics
10-20%fuel saving and emission reduction motion damping
The foils are made of a composite material to provide flexibility and robustness. Connected to the vessel through a flexible polyurethane support structure, the foil module can handle extreme loads from slamming events.
Standard foil modulesWavefoil’s range of foil modules is divided into two categories: foil modules for standard ships and foil modules for high-speed vessels. For standard ships we offer the following foil modules:
The WF1050 is a set of foil modules suitable for catamarans between 20 and 40 meters.
The WF2640 is a foil module suitable for fishing vessels, small ferries and yachts from 35 to 55 meters.
The WF3970 is a medium size foil module suitable for yachts, large fishing vessels and ferries between 55 and 90 meters.
The WF5910 is a large size foil module suitable for cruise ships, offshore vessels and cargo vessels above 90 meters.
WF2640
WF2640 in M/F Teistin
M/F Teistin with the bow foils deployed at MEST Shipyard in Tórshavn
Our very first foil module, the WF2640, was installed in M/F Teistin, a 45 meter RoPax vessel, in the Faroe Islands in September 2019.
Close-up internal view of the WF5910 foil module
M/F Teistin on her way out of Skopun Harbour in the Faroe Islands with the foils deployed.
Our foil module for high-speed vesselsHigh-speed catamarans achieve a significant motion damping by installing our WF1050 foil module in each hull. Simulations have shown up to 30% reduction of vertical motion. The WF1050 fits catamarans between 20 and 40 meters, and the relative motion damping is in the same order of magnitude for all high-speed catamarans in this range.
With the foils deployed, the crew may operate the vessel at up to 10 knots higher speed, or in up to 50% higher waves, and achieve the same comfort level as a vessel without our foils.
30% 50%reduction in vertical
motionhigher waves at a given
comfort level
The clean design, combined with NiAl-bronze, POM and aluminium ensures high strength, light weight and reliability.
The foil modules are installed from above through the tank top. They can easily be lifted up for maintenance while the vessel is docked.
WF1050 in a 40 meter passenger catamaran
* Weight per foil module
Dimensions are subject to change.
WF1050 WF2640 WF3970 WF5910
A [mm] 1050 2640 3970 5910
B [mm] 289 874 1380 1930
C [mm] 1685 3795 5195 7890
D [mm] 475 1200 1800 2400
E [mm] 460 1270 1920 2940
Weight[tonnes]
0,42* 7,2 25 75
Technical specifications
Contact info
CEOEirik Bøckmann
[email protected]+ 47 45263411
CTOAudun Yrke
[email protected]+ 47 48251432
Product DeveloperErlend N. Vastveit
[email protected]+ 47 48286069
Sales EngineerMichael N. Paulsen
[email protected]+ 47 98414075
www.wavefoil.com
Havnegata 77010 Trondheim
Org nr 917 810 508
© Wavefoil AS 2020
© Wavefoil AS 2020
