Resume of Dr. V Venkata Basava Rao

Resume of Dr. V Venkata Basava Rao

1. Name Vudata Venkata Basava Rao

(Surname) (Middle Name) (First Name)

2. Do you belong to a reserved category:

Other Backward Caste BC (B) Padmashali

3. Academic Record from Undergraduate Degree

Degree Specialisation University/Institute Year of

Completion

Marks &

Division

Rank

B.Tech Chemical Engineering Andhra University 1986 68%, First

M.Tech Chemical Plant Design and Fabrication

IIT-Kharagpur 1988 74.4%, First

PhD Chemical Engineering IIT-Kharagpur 1991

4. Academic Experience (a) Teaching Experience

Duration Organisation Area(s)

May 1995 to August 1997

(2 years 3 months)

JNTU College of Engineering,

Ananthapur

Chemical Engineering

August 1997 to till date

(19 years 8 months)

University College of

Technology, Osmania

University, Hyderabad


(b) Courses Taught

Course Number & Title UG Level / PG

Level

Years of

taught

Whether course

developed by you

Mass Transfer Operations-I and II UG 15 Modifications made


Thermodynamics-I and II

UG 5 Modifications made

Process Dynamics and Control UG 2

Process Equipment Design UG 2

Chemical Engineering Fluid

Mechanics

UG 2

Fluidization Engineering UG 2

Corrosion Engineering UG 2

Separation Processes PG 16 Modifications made

Air and Water Pollution

Engineering

PG 4 Yes

Attach

p

assport size

photo

Environmental Impact and

Assessment

PG 4 YES

Design of Experiments PG 2

5. Research Experience (a) Experience after PhD (Post-Doctoral)

Organisation Period from To Duration (years)

JNTU college of Engineering,

Anathapur

May 1995 August

1997

2 years and 3 months

University College of Technology,

Osmania University, Hyderabad

August

1997

Till Date 19 Years 8 Months

(b) Sponsored Research Projects

Year of

Funding

Sponsoring

Organisation

Title of Project Amount

of

Grant

Co-Investigators

(if any)

1996 AICTE Combustion studies of

Rice Husk in Circulating

Fluidized Bed

5 lakhs No

2006 AICTE Modelling and Evaluation

of Reaction Separations

7 Lakhs No

2012 DST-PURSE Experimental

investigations on

Fluidization behavior of

Nano Powders

8 Lakhs No

2015

TEQIP, CoE

Process Intensification in

Separation Operations:

Reactive Distillation and

Reactive Extraction

Rs. 12

Lakhs

No

(c) Student Research – Masters Degrees

S.N

o.

Name of Student Year Title of Thesis

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

Mrs.N. Annapurna Devi

Mr. Shankar Naik

Mr. P. Jawahar Lal

Mr. S. Ashok Vardhan

Mr.D. Krishna Sandilya

Ms. E. Santhosha

Mr. Ch. Balakrishna

Mr. Ch. Siva Kumar

Mr. G. Srinivasa Rao

Mr. K. Bharath

Mr. V. Lakshminarayana

Mr. Md. Rayeez Ahamed

Mr. R. Gangadhar

Mr. K.Mahesh

Ms. M. Suneetha

Ms. P. Suneetha

Mr. P. Rajesh

Ms. A. Sravanthi

Mr. A. Rakesh

Ms. Shalini

Ms. Sandeepa

Mr. Majid Farajpourlar

Mr. Upendra

Mr. Sai Charan

Mr. Yellamanda

Ms. Dharanija

Mr. K. Raju

Mr. Dhileep Kumar

Ms. Mounika

Mr. Nageswara Rao

Mr. Y. Srinivasa Rao

Mr. Raju B

Ms. Youga Sree

Ms. Vijaya Kumari M

Ms. Tejaswani

Ms. Karunya

Ms. Sailaja B

Mr. Anil Kumar

1998

1999

2000

2001

2002

2003

2004

2005

2005

2006

2006

2006

2007

2008

2008

2008

2009

2010

2010

2011

2011

2012

2013

2014

2014

2015

2015

2015

2015

2015

2016

2016

2016

2016

2017

2017

2017

2017

Modelling of Circulating Fluidized bed Riser

Some Hydrodynamic Studies in Liquid-Solid Circulating Fluidized

Bed

Hydrodynamic Prediction in Liquid Solid Circulating Fluidized Bed

Adsorption Studies on Colour Removal from Textiles

Dyeing Industrial Effluents by using Different Adsorbents

Studies on Flow Structure of Liquid Solid Circulating Fluidized Bed

Modelling of Near Wall Flow Structure in Circulating Fluidized Bed

Hydrodynamics of Liquid Solid Fluidization in Tapered Beds

Studies on Reactive Distillation of Lactic Acid

Liquid Mixing Studies in Liquid Solid Circulating Fluidized Bed

Column Exhaust Studies in Adsorption of Dye from Textile

Effluents onto Low Cost Adsorption

Modeling, Simulation and Optimization of Fixed Bed Reactor for

Selective Hydrogenation of Phenol

Studies on Batch Reactive Distillation of Aqueous Acetic Acid and

Methanol System

Studies on Loop Pressure Profile in Circulating Fluidized Bed Risers

Studies on Heavy Metals Adsorption from Industrial Waste Waters

using Low Cost Adsorbents

Adsorption studies in fixed bed for Removal of Dye from Effluents

Studies on Reactive Distillation of Lactic Acid

Adsorption studies in fixed bed for Removal of Heavy metals from

Effluents

Drying studies of Mustard Seeds in Fluidized bed Dryer

Adsorption studies in Tapered bed for Removal of Dyes from

Effluents

Reactive Extraction Studies

Studies on Fluidized Bed Drying of Sorghum grains

Studies on Nitrate Removal from Aqueous effluents

Studies on Inverse Fluidization

Adsorption Studies in Tapered Bed

Adsorption Studies using Bentonite

Studies on Biosorption Characteristics of Karanja Seeds

Studies on Reactive Distillation of Propionic Acid

Studies on Reactive Extraction of Carboxylic Acid

Combustion Studies of Karanja Biomass in Fluidized Beds

Fluidization Studies in Tappered Gas-Solid Fluidized Beds

Adsorption Studies in tapered fixed Beds

Studies in Rotating Fluidized Bed with Static Geometry

Studies on Membrane Separations for Treatment of Petroleum

effluents

Studies on Gasification of Solid waste from Municipal waste

Experimental Investigation on Reverse Osmosis technique to treat

waste water

Reactive Extraction of Propionic acid from waste water

Esterification of waste oil using TPP technique

Column Exhaust Studies in Tappered Beds for removal of colour

(d) Student Research – Doctoral Degrees

S.No

.

Name of

Student

Year of

Completio

n

Title of Thesis Co-Supervisors

(if any)

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11

Mr. Md.

Hafeezuddin

Mr. T.

Balanarasaiah

Mr. S. Ram

Mohan Rao

Mr. Sharat Babu

Mrs. Akila

Swatanthra

Mr. Amar Arab

Mr. Prathap

Kumar

Mr. N. Anil

Mr. T. Mohan

Rao

Mrs. Anitha S

Mrs. Sunitha P

2009

(Awarded)

2009

(Awarded)

2010

(Awarded)

2012

(Awarded)

2012

(Awarded)

2012

(Awarded)

2012

(Awarded)

2011

(Awarded)

2016 {to be

Awarded)

2016

(Submitted)

2017

(submitted)

Biomass gasification, Pyrolysis and Combustion

Studies in Fluidized Bed

Hydrodynamics and Modelling of Circulating

Fluidized Bed

Adsorption Studies in Treatment of Waste

Water with low cost adsorbents

Experimental Studies on Batch Reactive

Distillation of Lactic Acid using Butanol

Adsorption Studies on Removal of Heavy

Metals from Aqueous effluents using low cost

Adsorbents,

Removal of Nitrates from Ground Water using

Ion Exchange Resin

Reactive Extraction Studies

Studies on Artificial Nureal Networks based

Controls

Studies on Biosorption of Congo Red Dyes

using Various Adsorption

RTD Studies in LSCFB and Tappered

Fluidized Beds

Reactive extraction of Carbolic Acids from

aqueous solutions

Prof. Pramod

Kumar (JNTU)

No

No

Prof. T.

Sankarshana

No

No

Dr.

Vishwanadham,

IICT

Dr. Ch

Venkateswarlu,

IICT

No

No

No

10. Consulting Experience Period Organisation Nature of Projects Co-Consultants

(if any)

1998-1999

2001-2005

2002-2005

2004-2005

2006-2007

APCOST,

Hyderabad

M/s. NTPC

Ramagundam

M/s. R.K. Carbons,

Hyderabad

M/S Winrock

International India,

Secunderabad-09

M/S Titan Energy

Systems Limited,

Secunderabad-15

Biomass Combustion in CFB

Boilers

Utilization of Flyash for

Adsorption of Heavy metals and

Dyes from effluents

Characterization of Activated

Carbon Adsorbent

Drying characteristics of Tomato,

curry leaves etc

Standardization of Process to

manufacture Vanadium (IV) &

Vanadium (III) Sulfate in 2M

Sulphuric Acid from Vanadium

Pentoxide

No

Mr. S. Ram Mohan Rao

Mr. S. Ram Mohan Rao

No

No

11. Industrial Experience Period Organisation Description of Work and Responsibilties

1991-1995 M/S. Bharat

Dynamics Limited,

(Ministry of

Defence), Bhanoor,

Medak, AP

Junior Manager,

Monitoring effluents treatment operations

of Electroplating plant and DM water

plant. Installation, Execution and

Supervision on electroplating operations

like Ag. Pd, Cu, Ni, Cr, Cd, Zn, Anodization

on Missile parts.

Over 20 operators were under

management. Major contribution is

establishment of Palladium, Chromium

and Hard Anodization Processes.

12. Administrative Experience Period Designation Nature of Responsibility

Dec’2016 to till

date

Head, Department of

Pharmacy

To look after the Academic programs of

Department of Pharmacy

Jan’2017 to till date Dean, Faculty of

Pharmacy

To plan the academic programs of

Faculty of Pharmacy

2015 to 2016 (1 Yr) Head, Department of

Technology

To look after the Academic programs of

Department of Technology

2013 to 2016 (3 Yrs) Dean, Faculty of

Technology

To plan the academic programs of

Faculty of Technology

2011 to 2013 (3 Yrs) Vice Principal, University

College of Technology, OU

To Look after the general administration

and assisting the Principal in general

administration

2010- 2015 (5 Yrs) Head, Department of


To look after the academic activities of

UG and PG Courses of Chemical

Engineering

1999-2007

2010 to 2011 (9Yrs)

Director, Placement and

Training Cell

To look after placement and Industrial

Training Activities

2004-2005 (1 Yr) Officer Incharge of

Examinations

To look after conduct of UG and PG

examinations

1998-2003 (5 Yrs)

Officer, Incharge, Stores

and Purchase

To monitor the equipment purchasing

activities of the college

2004-2006 (2 Yrs) Chairman, Board of

Studies, (Global)

To revise the syllabus, and preparing the

Almanac of the programs in University

2010-2012 (2 Yrs) Chairman, Board of

Studies, (Autonomous)

To revise the syllabus, and preparing the

Almanac of the programs in College

2010 to till date Coordinator, TEQIP-II To look after TEQIP activities and

coordinating among the Nodal Officers

and SPFU

13. Present Position Designation Organisation Total Emoluments (Rs.)

Professor, Chemical

Engineering

University College of Technology,

Osmania University, Hyderabad-07

Rs. 1,81,715

14. Current Areas of Research Specialisation

Circulating Fluidized Bed Technology (both gas-solid and liquid-solid)

applications to environmental related problems,

Fluidization Behaviour of Nano-Powders in Tappered Columns

Process Intensification: Rotating Fluidized Bed with Static Geometry for Drying

Applications

Reactive Separation operations for Process Intensification, Divided Wall Column

distillation

Water and Wastewaters treatment by using various Adsorbents particularly Fly

ash 15. Publications (a) Papers in International Journals (those published by agencies outside India)

Published

1. “Distribution of Voidages in Circulating Fluidized Beds”, V. V. Basava Rao, R.K.Saha and

P.Senguptha, Chem. Engg. Commun., Vol.135, 147-160, 1995.

2. “Adsorption Studies on Treatment of Textile Dyeing Industrial Effluent by Flyash”. V.V.

Basava Rao and S. Ram Mohan Rao, Chemical Engineering Journal (Elsevier), Vol 116, 77 -84,

2006. (Listed as 4th

in top 25 articles within the journal for Jan- Mar 2006 most downloaded

articles)

3. “An Experimental Study of Liquid- Particle Flow in Circulating Fluidized Bed”, V. V. Basava

Rao, Ch. Sailu and D. Krishna Sandilya, Chem. Eng. Commun. (Taylor & Francis) 194, 353-

367, 2007.

4. “Removal of Hexavalent Chromium from Electroplating Industrial Effluents by Using

Hydrothermally Treated Fly Ash”, S. Ram Mohan Rao and V. V. Basava Rao, Journal of

Applied Sciences, 7 (15): 2088-2092, 2007

5. “Experimental Investigation on Rice Husk Fluidization in Circulating Fluidized Bed”, Mohd.

Hafeezuddin, Basava Rao, V. V., Pramod Kumar, An International Research Journal of

Engineering and Technology, Vol. 1 (2), 67- 71, October- December, 2008.

6. “Reactive Extraction of Levulinic Acid from Aqueous Solutions with Tri-n-Octylamine (TOA)

in 1-Octanol: Equilibria, Kinetics, and Model Development” T. Prathap Kumar, B.

Vishwanadham, K.N. Prasanna Rani, M. Mallikarjun and V. V. Basava Rao , Volume 198,

Issue 4, pages 572-589, 2010

7. “Prediction of Falling Solids Film Thickness near the Wall in Circulating Fluidized Bed Risers”,

V.V. Basava Rao, T.Bala Narsaiah and B.V. Reddy, IJCEA 2011 Vol.2(2): 84-90 ISSN: 2010-

0221, 2011

8. “On Prediction Of Viscosity Of Nanofluids For Low Volume Fractions Of Nanoparticles”, N.

Siva Shanker,M. Chandra Shekar Reddy and V. V. Basava Rao, International Journal of

Engineering Research & Technology (IJERT), Vol. 1 Issue 8, October - 2012

9. “Studies on Fixed and Fluidized Bed Ion Exchange Column to Treat Wastewater”, Majid

Farajpourlar, S. Ram Mohan Rao, V. V. Basava Rao, IOSR Journal of Environmental Science,

Toxicology and Food Technology (IOSR-JESTFT), e-ISSN: 2319-2402,p- ISSN: 2319-

2399.Volume 6, Issue 1 (Sep. - Oct. 2013), PP 01-06, 2013.

10. “Adsorption of Chromium (VI) from aqueous solution using a solid waste (Bagasse)”, P. Akhila

Swathanthra and V. V. Basava Rao, in Journal of Emerging Trends in Engineering and

Development, Issue 3, Vol.5 (September 2013), ) ISSN 2249-6149, Page 330-336, 2013

11. “Fluidization Characteristics of Nano Particles with the Assist of Stirrer” Asadollah Kariman,

V. V. Basava Rao, Majid Farjpourlar, IOSR Journal of Applied Physics (IOSR-JAP) e-ISSN:

2278-4861.Volume 5, Issue 3 (Nov. - Dec. 2013), PP 24-27, 2013

12. “Recovery of Lactic Acid by Reactive Distillation‟, V.V. Basava Rao, P. Shiv Kumar, Ch.

Sailu and S. Ram Mohan Rao, Online, Journal of Applied Sciences, (ISSN 1812-5654), Volume

14 (12), 1289-1293, 2014

13. “Adsorption of Cadmium and Zinc ions from Aqueous solution using Low Cost Adsorbents”, P.

Rajesh Kumar, Akila Swathanthra, V.V.Basava Rao, and S. Ram Mohan Rao, on line, Journal

of Applied Sciences, (ISSN 1812-56554), Volume 14 (13), 1372-1378, 2014.

14. “Removal of Cadmium Ions by adsorption on to Saw Dust as Adsorbent form Aqueous

Solution”, P Akhila Swanthanthra and V V Basava Rao, International Journal of Emerging

Trends in Engineering and Development, Issue 4, Vol. 5, Page 291- 298, (Aug- Sept) 2014

15. “Bagasse as a Potential Adsorbent of Cadmium Removal from Aqueous Solutions”, P Akhila

Swanthanthra and V V Basava Rao, International Journal of Innovations in Engineering and

Technology, Vol. 4, Issue 1, Page 109- 115, June, 2014

http://www.tandfonline.com/loi/gcec20?open=198#vol_198

http://www.tandfonline.com/toc/gcec20/198/4

16. “Biosorption of Congo Red using Allium Sativum skin powder”, Mohan Rao Tamtam and

Basava Rao Vudata Venkata, in Res. J. Chem. Environ, vol. 19 (11), Page 35-44, November,

2015

17. “Synthesis and Characterization of Polyion Complex Membranes Made of Aminated

Polyetherimide and Sulfonated Polyethersulfone for Fuel Cell Applications” N Harsha, S.

Kalyani, V. V Basava Rao, S.Sridhar; in Journal of Fuel Science and Technology, Transactions

of ASME, Vol. 12, Page 2, Dec, 2015

18. “Kinetic Studies congo Red Adsorption on to Modified Bentonite”, Mohan Rao T and V V

Basava Rao, in Journal of Chemical and Pharmaceutical Sciences, special Issue 10, page 254,

July 2015

19. “Thermodynamic and Isothermal Studies of Congo Red Adsorption on to Modified Bentonite”,

Basava Rao V V and Mohan Rao T, in Korean Chem. Eng. Res, 53(6), 1-6, 2015

20. “Thermodynamic Parameter Evaluation and Reaction Studies for Butanol Esterification Process

in Presence of Sodium-Bentonite Catalyst”, B.Rajam, Ch.Venumadhav, P.S.Saiprasad, Ch.Sailu

& V.V.Basava Rao, Journal of Engineering and Technology (JET), Vol. 3, Issue 1, 1-10, Jun

2015

21. “Experimental studies on lactose biodegradation of dairy effluent by K.lactis”, Sumithra, AVN

Swamy and V V Basava Rao, International Journal of Advanced Research, Volume 4, Issue 7,

2196-2200, 2016

22. “Enhanced Fluidization of Nanoparticle TiSiO4with the Assist of Stirrer”, H Upender and V V

Basava Rao, International Journal of Scientific Progress and Research (IJSPR), Volume-24,

Page, 94, Number - 02, 2016

23. “Biosorption of Congo Red from Aqueous Solution by Crab Shell Residue: a Comprehensive

Study”, Tamtam Mohan Rao and Vudata Venkata Basava Rao, Springer Plus (Open Access),

5:537, 2016

24. “New biosorbent based on deoiled karanja seed cake in biosorption studies of Zr(IV):

Optimization using Box–Behnken method in response surface methodology with

desirability approach”, Sayanasree Varala, Banala Dharanija, B. Satyavathi , V.V. Basava

Rao, R. Parthasarathy, Chemical Engineering Journal 302, 786–800, 2016

25. “Performance evaluation of sodium alginate–Pebax polyion complex membranes for application

in direct methanol fuel cells”, Harsha Nagar, C. Sumana, V. V. Basava Rao, S. Sridhar, J. Appl.

Polym. Sci. Volume 134, Issue 7, February 15, 2017 (Version of Record online: 8 Oct, 2016)

26. “Aerobic Biodegradation of dairy wastewater by fluidized bed bio reactor”, Sumithra Salla,

AVN Swamy, V V Basava Rao, Int. J. Adv. Res. 4(12), 2703-2706, Dec, 2016.

27. Synthesis and characterization of Torlon-based polyion complex for direct methanol and

polymer electrolyte membrane fuel cells, Nagar, H., Basava Rao, V.V. & Sridhar, S. J Mater

Sci (2017)

(b) Papers in Indian Journals

Published

1. “Distribution of axial Voidages in the riser of a Circulating Fluidized Bed” V. V. B. Rao, S.

Mandal, D.K. Acharjee & P.Senguptha, Indian Journal of Chemical Technology, Vol 2, 1-5,

January 1995.

2. "Prediction of Loop Profile in a Circulating Fluidized Bed", K.Nag, S.Das, Basava Rao V. V.

R.K. Saha & P.SenGupta, Indian Chemical Engineers, Vol.38(A) No.3, 1996.

3. "On the Prediction of Bed Voidages in a Fast Fluidized Bed System", Basava Rao V.V. R.K.

Saha & P.SenGupta, Indian Chemical Engineers, Vol.38(A) No.3, 1996.

4. "Radial solid Mass Flux Variations in Fast Fluidized Bed", Basava Rao V.V. R.K. Saha &

P.SenGupta, Indian Chemical Engineers, Vol.39 (A) No., 1997.

5. "Gas-Solid Flow Structure in Fast Fluidized Bed System", Basava Rao V.V. R.K. Saha &

P.SenGupta, Indian Chemical Engineers, Vol.40 (A) No., 1998.

6. " Estimation of Axial Voidage Profile in Circulating Fluidized Bed Riser", Basava Rao, V.V. &

R.K. Saha, Institution of Engineers (India) Journal-CH, Vol.80, PP 38-43, March 2000

7. "Evaluation of Solids Decay Factor in Circulating Fluidized Bed Riser”, V.V.Basava Rao & R.

Gangadhar, Institution of Engineers (India) Journal- CH, Vol. 81, P.P 25-28, March 2001

8. "Transition Velocities For Fast Fluidization In Circulating Fluidized Bed Riser", V.V. Basava

Rao, Indian Chemical Engineers, Section A, Vol.44, No.1, 33-36, Jan-Mar, 2002.

9. “Thermogravimetric Studies on the kinetics of Rice Husk Pyrolysis” V. V. Basava Rao,

Engineering Today, pp. 5-8, May 2002.

10. "Hydrodynamic Predictions in Liquid-Solid Circulating Fluidized Bed", V.V. B. Rao, Institution

of Engineers (India) Journal, p.p 64, March- 2005.

11. “Modeling of Flow Structure near Wall in Circulating Fluidized Bed”, E. Santhosha, T. Bala

Narasaiah and V. V. Basava Rao, Indian Chemical Engineers, Vol. 49 No.1 pp 38-44, Jan-

March, 2007

(c) Papers in International Conferences (those held outside India)

1. “Hydrodynamic Studies in Fast Fluidization of Particulate Solids”, V. V. B. Rao, R.K.Saha & P.

Sengupta, in CHEMCON-89 held at Trivandrum in Dec‟ 1989. and Published in Proceedings

(pp 13 to 18).

2. :Construction Materials from Circulating Fluidized Bed Boiler Solid Waste”, V. V. Basava

Rao, P. Vinay Sekhar & G. Ram Prakash, in National Conference on „Cost Effective Materials

and Techniques for Mass Housing‟ held at Anantapur, in June‟ 1997 and published in

Proceedings (pp 196 -210).

3. “Building Materials from Circulating Fluidized Bed Boiler Solid Waste”, V. V. B. Rao & P.

Vinay Sekhar, in National Seminar on „Role of Building Chemicals in Construction Industry‟

held at Allahabad in July‟ 1997. (got Best Paper Award) and published in Proceedings (pp 1-

17).

4. “Loop Pressure Profile in Circulating Fluidized Bed System”, K. Nag, S. Das, V. V. Basava

Rao, R.K. Saha and P. Sengupta, First International Conference on Combined Cycle Power

Generation, held at Calcutta in January, 1994. and published in Proceedings (pp 1- 8).

5. “Treatment of Textiles Effluents by Flyash: Adsorption Studies” A.V.Srikanth, S.V.R. Reddy,

Ch. Sailu and V.V.B. Rao, in CHEMCON- 2000 held at Calcutta in Dec‟ 2000 and published in

Proceedings (pp TP75-78).(got Best Presentation Award)

6. “Hydrodynamic Predictions in Liquid Solid Circulating Fluidized Bed”, P. Jawaharlal S.,

Shankar Naik and V. V. B. Rao, in CHEMCON-2000, held at Calcutta, in Dec‟ 2000. and

published in Proceedings (pp TP 59- 62).

7. “Thermogravimetric Studies on the Kinetics of Rice Husk Pyrolysis”, V.V.Basava Rao and Ch.

Sailu, in CHEMCON – 2000, held at Calcutta in Dec‟ 2000 and published in Proceedings (pp

REC 1- 4).

8. “Flow Properties Prediction of Fine Powders” A. Ramakanth, V.V.Durga Praveen and V.V.B.

Rao, in CHEMCON- 2000 held at Calcutta in Dec‟ 2000 and published in Proceedings (pp

TP75-78).

9. “Studies on Flash Pyrolysis of Rice Husk”, Ch Sailu, V.V.Basava Rao & P. Laxminarayana, in

International Congress on Renewable Energy (ICORE)- 2006, held at Hyderabad, during 8-11

Feb‟ 2006 and published in proceedings (PP 447- 413).

10. “Phenol Adsorption on Flyash and Biomass Chars”, V.V.Basava Rao and S. Ram Mohan Rao,

in International Conference on Cleaner Technologies and Environmental Management, held at

PEC, Pondicherry, India, during January 4-6, 2007 and published in Proceedings (pp 377-381)

11. “Removal of Cadmium and Zinc from Metal Finishing Industrial Effluents by Low Cost

Adsorbents”, V.V Basava Rao, K. Mahesh, D.Jaya Prakash and S. Ram Mohan Rao, in

International Conference on Cleaner Technologies and Environmental Management, held at

PEC, Pondicherry, India, during January 4-6, 2007 and published in Proceedings (pp 185-190)

12. “Non Bacterial SYNTHESIS of Biofuel from Cellulose”, Praveen Kumar Gorakavi, Venkata

Basava rao V, Sailu Ch and Laxminarayana P , 2008 AIChE Annual Meeting

13. “HYDRODYNAMIC CHARACTERISTICS OF LIQUID-SOLID FLUIDIZATION OF

BINARY MIXTURES IN TAPERED BEDS” J. S. N. Murthy, S. Nandana, Phani Kiran S. V.

G. R., V Ramesh, V. V. Basava Rao, T. Sankarshana, Fluidization XIII: New Paradigm in

Fluidization Engineering May 16-21, 2010 Hotel Hyundai, Gyeong-ju, Korea

14. “Removal of Nitrate from Water using a Fluidized Bed Ion Exchange Column” Ammar Arab

Beddai, V.V.Basava Rao and S. Ram Mohan Rao, in 3rd International Conference on

Chemistry and Chemical Engineering IPCBEE vol.38 (2012) © (2012)IACSIT Press, Singapore,

2012

15. “Equilibrium Studies on Reactive Extraction of Lactic Acid using Tri- butyl amine in

Chloroform” , Shalini Basetty and Basava Rao V. V in 3rd International Conference on

Chemistry and Chemical Engineering IPCBEE vol.38 (2012) © (2012)IACSIT Press, Singapore

16. “Studies on Drying of Sorghum Seeds in a Fluidized Bed Dryer”, K. Sandeepa, V.V. Basava

Rao, and S. Ram Mohan Rao”, in "The 14th International Conference on Fluidization – From

Fundamentals to Products", Eds, ECI Symposium Series, Volume (2013).

(d) Papers in Indian Conferences

1. “Loop Pressure Profile in Circulating Fluidized Bed System”, K. Nag, S. Das, V.V.Basava Rao,

R.K. Saha and P. Sengupta, First International Conference on Combined Cycle Power

Generation, held at Calcutta in January, 1994. and published in Proceedings (pp 1- 8).

2. “Studies on Flash Pyrolysis of Rice Husk”, Ch Sailu, V.V.Basava Rao & P. Laxminarayana, in

International Congress on Renewable Energy (ICORE)- 2006, held at Hyderabad, during 8-

11 Feb‟ 2006 and published in proceedings (PP 447- 413).

3. “Phenol Adsorption on Flyash and Biomass Chars”, V.V.Basava Rao and S. Ram Mohan Rao,

in International Conference on Cleaner Technologies and Environmental Management,

held at PEC, Pondicherry, India, during January 4-6, 2007 and published in Proceedings (pp

377-381)

4. “Hydrodynamic Studies in Fast Fluidization of Particulate Solids”, V.V.B.Rao, R.K.Saha & P.

Sengupta, in CHEMCON-89 held at Trivandrum in Dec‟ 1989. and Published in Proceedings

(pp 13 to 18).

5. “Effect of Solid Circulation Rate on the Hydrodynamics and Fast Fluidized Bed”, V.V.B.Rao,

R.K.Saha & P. Sengupta, in CHEMCON-90 held at Varanasi in Dec‟ 1990. (got Best Paper

and Presentation Award) 6. “On Solid Flux (Radial and Axial) Variations in Fast Fluidized Bed”, R.K. Saha, V.V.B. Rao &

P. Sengupta, in CHEMCON-91 held at Madras in Dec‟ 1991.

7. “Studies on Hydrodynamics of Circulating Fluidized Bed”, V.V.B.Rao, R.K.Saha &

P.Sengupta, in CHEMCON-92, held at Mangalore in Dec‟1992.

8. “Critical Velocities in Fluid-Particle Systems”, S.Das, V.V.B.Rao, R.K.Saha & P.Sengupta in

CHEMCON- 93 held at Bombay in Dec‟ 1993.

9. “Prediction of Reduced Radial Solids Flux and Core Diameter in a Circulating Fluidized Bed

System”, K. Nag, V.V.B.Rao, R.K.Saha & P.Sengupta, in CHEMCON-94, held at Kharagpur,

in Dec‟ 1994. (got Best Paper and Presentation Award).

10. “Energy Conservation vis-avis Chemical Process Industry”, V.V.Basava Rao & K. Vijaya

Kumar Reddy in National Seminar on „Energy Conservation in Fertilizer & Other Chemical

Industries‟, held at REC Warangal, in Apr‟ 19, 1997.

11. “Efficient Removal of Air Pollution Emissions in CFB Boiler”, V.V.Basava Rao, in National

Symposium on „Technology and Management of Industrial Wastes and Pollution‟ held at

Waltair in June 1997.

12. :Construction Materials from Circulating Fluidized Bed Boiler Solid Waste”, V.V.Basava Rao,

P. Vinay Sekhar & G. Ram Prakash, in National Conference on „Cost Effective Materials and

Techniques for Mass Housing‟ held at Anantapur, in June‟ 1997 and published in Proceedings

(pp 196 -210).

13. “Building Materials from Circulating Fluidized Bed Boiler Solid Waste”, V.V.B.Rao & P.

Vinay Sekhar, in National Seminar on „Role of Building Chemicals in Construction Industry‟

held at Allahabad in July‟ 1997. (got Best Paper Award) and published in Proceedings (pp 1-

17).

14. “Prediction of Solid Holdup Decay Constant in a Fast Fluidized Bed Regime”, Basava Rao V.

V., R.K. Saha & P. Sengupta, in CHEMCON-97 held at New Delhi in Dec‟ 1997.

15. :”Transition Velocities for Fast Fluidization in CFB”, V.V.Basava Rao, in CHEMCON-98 held

at Visakhapatnam, in Dec‟ 1998.

16. “Hydrodynamic Predictions in Liquid Solid Circulating Fluidized Bed”, P. Jawaharlal S.,

Shankar Naik and V.V.B.Rao, in CHEMCON-2000, held at Calcutta, in Dec‟ 2000. and

published in Proceedings (pp TP 59- 62).

17. “Thermogravimetric Studies on the Kinetics of Rice Husk Pyrolysis”, V.V.Basava Rao and Ch.

Sailu, in CHEMCON – 2000, held at Calcutta in Dec‟ 2000 and published in Proceedings (pp

REC 1- 4).

18. “Clustering Phenomena in Fast Fluidization: A Review”, E. Santhosha, T. Bala Narasaiah &

V.V.Basava Rao in All India Seminar on “Advances in Fluidization Engineering”, held at

Tirupathi in Feb‟ 2004.

19. “Liquid Solid Circulating Fluidization and its Applications”, D. Krishna Sandilya, T. Bala

Narasaiah & V.V.Basava Rao in All India Seminar on “Advances in Fluidization Engineering”,

held at Tirupathi in Feb‟ 2004.

20. “Flow Structure of Liquid Solid Circulating Fluidized Bed”, K. Sandilya Durbha, T.

Balanarasaiah and V.V.Basava Rao, in CHEMCON -2004 held at Mumbai in Dec‟ 2004. (got

Best paper and Presentation Award).

21. Anil, N., V.V. Basava Rao & Ch.Venkateswarlu, State Estimation of A Multistage

Multicomponent Batch Separation Process With Optimal Sensor Configuration, Presented at the

Technical Session of 58 th Annual Session of Indian Chemical Engineering Congress Organized

by Indian Institute of Chemical Engineers in Association with International partners, Delhi, 14th

-17th

, December 2005

22. “Removal of Hexavalent Chromium from Electroplating Industrial Effluents by using

Hydrothermally Treated Flyash”, S. Ram Mohan Rao & V.V.Basava Rao, in National Seminar

on „Solid Waste Management in Chemical and Allied Industries‟ held at Guntur during Aug 18-

19, 2006.

23. Anil, N., V.V. Basava Rao and Ch.Venkateswarlu, Data Driven Model Based Composition

Estimation Scheme for Batch Distillation. National Symposium on Advances in Chemical

Engineering, held at University College of Technology, Osmania University, Hyderabad, India,

22-24, November 2007.

(e) Books

Published

S.No

.

Name of Book Year of

Publication

Name of Publisher Co-authors

(if any)

1 Reminiscences of Chemical

Engineering

2002 OU Press No

16. Awards, Honours and Recognitions Best outstanding Chemical Engineer of the Year 2009 (for less than 45 years age) by M/S.

Hindustan Lever India Limited given at Indian National Congress of Indian Institute of

Chemical Engineers (CHEMCON 2009) held in Visakhapatnam during Dec 2009

Best Professor Award (6th

position in the top Ten in AP) for the year 2008 by M/s.24/7

Customer Care in Education, AP

„Young Scientist‟ Award by Andhra Pradesh State Council for Science and Technology

(APCOST) for the year 1998

Best Paper and Best Presentation Awards: 04

17. Research Plan for the next 5 years

General

Priority areas are;

1. Gas-Solid Fluidization characterization in HiGee equipment

2. Reactive Separations of carboxylic acids which are difficult to separate by conventional

distillation methods

3. Divided wall distillation columns for multicomponent mixture separation

4. Micro-channels for reactive separations

Establishing a laboratory for process intensification thereby interacting with industries and

Research & Development to work on collaborative Research projects (minor and major), apply

for funding and Joint Research Publications.

Specific

In proposed plan for next 5 years, complete hydrodynamics study of novel fluidized reactors

such as internally circulating fluidized bed (ICFB), Tapered fluidized bed (TFB) and Rotating

fluidized bed (RFB) will be pursued. The main goal of this research proposal is to develop and

adapt an intensification method of multi-phase systems and modeling approaches to

aforementioned novel fluidized bed reactors. An experimental test matrix by using a full

factorial design is proposed to study the true flow characteristics of particles in these kinds of

fluidized beds

18. Teaching Plan for the next 3 years

Courses to take

Mass Transfer Operations

Chemical Engineering Thermodynamics

Advanced Separation Processes

Equipment Design and Fabrication

Specific Plan

Curriculum modification by including industry demand driven concepts in the above courses

Adopting the ICT methods to supplement the chalk and talk methods for better teaching

Preparation of online course materials

19. Any Other Relevant Information supporting this application for a faculty position

Conferences & Seminars Conducted

Major: (i) 55th

Annual Session of Indian Institute of Chemical Engineers,

“CHEMCON-2002” during 19-22, December, 2002 as Joint Organizing

Secretary

(ii) Advances in Chemical Engineering (AChemE) during 22-24, Nov,

2007 as Convener

Minor: 15

INVITED LECTURES

1. A Lecture delivered on “Hydrodynamic Aspects of Gas Solid & Liquid-Solid Circulating

Fluidized Beds” in the Workshop on Advances in Fluidized Bed Technologies and Applications,

during 13- 15, July 2001, at Vellore Institute of Technology, Vellore- 632 014, Tamil Nadu,

India.

2. A Lecture delivered on “Turbulent and Circulating Fluidized Bed Reactors” in All India

Seminar on Advances in Fluidization Engineering, during 26-27, February 2004, at Department

of Chemical Engineering, S.V. University, Tirupathi, Andhra Pradesh, India.

3. A Lecture delivered on “Circulating Fluidized Bed Technology”, on 01-9-2004 at Department of

Chemical Engineering, Swami Ramananda Tirtha Institute of Science & Technology, Nalgonda.

Andhra Pradesh.

4. A Lecture delivered on “Fluidization and its Industrial Applications” on 8th

March 2007 at

Department of Chemical Engineering, Sri Venkateswara Engineering College, Suryapet-

508213, Nalgonda (Dist), Andhra Pradesh.

5. A Lecture delivered on “Flyash Utilization for Treating Effluents” on 10th

March 2007 at

Department of Chemical Engineering, JNTU College of Engineering, Anantapur-515 002,

Andhra Pradesh

6. A Guest Lecture delivered on “Batch Reactive Distillation” on 15th

Sept‟ 2008 at Department of

Chemical Engineering, CBIT, Hyderabad

7. An Invited Lecture is delivered on “Waste Water Treatment using Low cost Adsorbents” on

March‟ 2010, at Department of Chemical Engineering, GMRIT, Rajam, Srikakulam (Dist)

8. A Guest Lecture delivered on “Fluidization- Applications and Challenges” on 23rd

October‟

2011 at Department of Chemical Engineering, Andhra University, Visakhapatnam.

9. A Guest Lecture is delivered on “Circulating Fluidized Bed and Geldart‟s C Particles” on 15th

September 2012, at, Institute of Science and Technology, JUNTU Hyderabad

10. An Invited Speech delivered on “Pollution and its Abatement” on 15th

September, 2013 at

Department of Chemical Engineering, BVRIT, Narsapur, Medak (dist).

11. A Guest Lecture is delivered on Separation “Reactive Separations” on 25th

September, 2014 at

Institute of Science and Technology, JNTU Hyderabad

12. An Invited Speech is delivered on “Fluidization: an Overview” on 23rd

September, 2015 at RVR

JC College of Engineering, Guntur

13. An Invited Speech is delivered on “Novel Distillation Methods” on 25th

Jan, 2016 at RGUKT,

Nuzvid

14. An Invited Lecture is delivered on “Process Intensification approaches” on 12th

Sept‟2016 at

BVRIT, Narsapur, Medak (dist)

SHORT-TERM COURSES ATTENDED

1. Work shop on “Computational Techniques- I” conducted by Dr.N.K.Mitra, Institut fur Thermo

und Fluiddynamik, Ruhr Universitat, Bochum, West Germany during 7-11 August 1989 held at

Chemical Engineering Department, IIT- Kharagpur.

2. Short Term (Three Months) Course on “Guided Missiles Course” conducted by Institute of

Armament Technology, Defence Research & Development Organization Government of India,

Ministry of Defence from 16 June 1994 to 14 September 1994 at Girinagar, Pune.

3. Short Term Course on “Optimization Techniques for Engineering Design” conducted by

Department of Mechanical Engineering, IIT- Kanpur from 20 May 1996 to 25 May 1996 at IIT

Kanpur.

4. Short Term Course on “Design and Analysis of Experiments” conducted by University College

of Technology, Osmania University, Hyderabad on 2-3 March, 2001 at OUCT, Hyderabad.

5. Short Term Course on “Modelling, Simulation and Analysis of Enhanced Distillation Processes”

conducted by Department of Chemical Engineering, IIT Madras, from May 12, 2003 to May 16,

2003 at IIT Madras, Chennai.

6. DST-SERC School on “Modelling of Industrial Reactore” conducted by Department of

Chemical Engineering, IIT-Kanpur, from May 12 to May 17 2004. at IIT-Kanpur.

7. Short-term Course on “Tracer Studies of the Graduates of Engineering Colleges under TEQIP”

conducted by NITTTR, Chennai, from 06-11-2006 to 10-11-2006 at NITTTR, Chennai.

8. Workshop & Training on “Computational Fluid Dynamics” conducted by C-DAC, Pune from

December 11- 15, 2006 at C-DAC, Pune.

9. DST-SERC School on “Advanced Separation Processes in Chemical & Bio-chemical Process

Industries” held from 21st to 24

th March, 2007 at University Institute of Chemical Technology,

Mumbai.

SEMINARS PARTICIPATED AS RESOURCE PERSON 1. Participated as Quiz Master for Technical Quiz in Chemical Engineering in the following

Seminars

Student Seminar of Techno quest 1999 and 2000 at O.U.

Student seminar of FUSION 2001 at JNTU College of Engineering Anantapur

Student Seminar of CHEMPODIUM at SRTIST, Nalgonda

Student Seminar of TEKNOQUEST 2002 at UCT, Hyderabd, O.U.

2. Participated in 53rd ANNUAL SESSION OF INDINA INSTITUTE OF CHEMICAL

ENGINEERS, CHEMCON‟2000 held at Calcutta during 18-21, Dec‟2000 and Chaired the

Technical Session 3. Participated in FUSION-2000 held at JNTU College of Engineering, Anantapur, during April

2000 and Chaired a Technical Session.

4. Participated in 57th

ANNUAL SESSION OF INDINA INSTITUTE OF CHEMICAL

ENGINEERS, CHEMCON‟2004 held at Mumbai during Dec‟2004 and Chaired the Technical

Session 5. Participated in 58

th ANNUAL SESSION OF INDINA INSTITUTE OF CHEMICAL

ENGINEERS, CHEMCON‟2005 held at New Delhi during Dec‟2005 and Chaired the

Technical Session



ENGINEERS, CHEMCON‟2007 held at Kolkata during Dec‟2007 and Chaired the Technical

Session



ENGINEERS, CHEMCON‟2011 held at Jalandhar, Punjab during Dec‟2011 and Chaired the

Technical Session



ENGINEERS, CHEMCON‟2012 held at Bangalore during Dec‟2012 and Chaired the

Technical Session



ENGINEERS, CHEMCON‟2013 held at Mumbai during Dec‟2013 and Chaired the Technical

Session



ENGINEERS, CHEMCON‟2014 held at Chandigarh during Dec‟2014 and Chaired the

Technical Session


ANNUAL SESSION OF INDIAN INSTITUTE OF CHEMICAL

ENGINEERS, CHEMCON 2015 held at IIT- Guwahati during Dec‟ 2015 and Chaired the

Technical Session of Advanced Separations

SPECIAL CLASSES TAKEN AS A RESOURCE PERSON

1. Orientation Classes for Non-Chemical Engineering Junior Officers belongs to M/s. Nuclear Fuel

Complex in "Introduction to Various Unit Operations of Chemical Engineering” for the Batches

2005, 2004, 2003, 2002, and 2001

2. Orientation classes for Chemical Engineering Junior Officers belonging to M/S Nuclear Fuel

Complex in “Advaned Mass Transfer” for the Batch of 2016.

3. Classes in “Heat and Mass Transfer” for Bio-Medical Engineering Students belong to

Department of Bio-Medical Engineering, University College of Engineering, Osmania

University for the Batches 2001, 2000, 1999 and 1998.

4. Classes in “Fluid Mechanics, Mass Transfer and Chemical Engineering Thermodynamics” for

Chemical Engineering Students belong to Dr.B.V.Raju College of Engineering and Technology,

for the Batch 1998.

5. Classes in “Chemical Engineering Thermodynamics” for the Chemical Engineering Students

belong to Bhoj Reddy College of Engineering and Technology for Women for the batch 1999.

6. Classes in “Chemical Engineering Thermodynamics” for the Chemical Engineering Students

belong to D.V.R. College of Engineering for the batch 2000.

7. Classes in “Mass and Separation Processes” for the Bio-Technology Students belong to Malla

Reddy Engineering College for the batch of 2003.

8. Classes in “Bio Transport Processes” for the ME (Bio Medical Engg) students belong to

Department of Bio Medical Engineering, University College of Engineering , Osmania

University Hyderabad-07

PROFESSIONAL SERVICE ACTIVITIES

1. Vice President, IIChE, Head Office for the Year 2015-2016

2. Hon. Joint Secretary of IIChE, Head Office for the year 2014-2015

3. Nominated as Hon. Registrar of IIChE, Head office for the year 2013-2014

4. Reelected as IIChE Council Member for the period 2013-2016

5. Nominated as Hon. Controller of Examinations, IIChE for the period 2008-09

6. Elected Council Member of IIChE, Kolkata for the period 2005-2008

7. Co-opted Council Member of IIChE, Kolkata for the year 2001-2002

8. Honorary Editor for Bulletin of IIChE, Hyderabad Regional Centre

9. Honorary Secretary of IIChE, Hyderabad Regional Centre

10. Honorary Treasurer of IIChE Hyderabad Regional Centre

SERVICE TO SOCIETY: 1. „Best Group Leader‟ in the Janmabhoomi Programme Consisting of Prajalavaddaku

Paalana, Sramadanam and Microlevel Planning held from 1-1-1997 to 8-1-1997 in the

District of Anantapur Award by Government of Andhra Pradesh

2. Participated in Blood Donation Camps

3. Participated in Environmental Awareness Programes

4. Participated in Energy Run

EDITOR and REVIEWING THE TECHNICAL ARTICLES FOR REFERRED JOURNALS

1. Editorial Board Member of Research Journal of Engineering and Technology (ISSN 0974-2824)

2. Editorial Board Member of International Journal of Chemical Engineering and Processing

(eISSN : 2455-5576)

3. Editorial Board Member of International Journal of Chemical Separation Technology

4. Editorial Board Member of Editorial Board : International Journal of Prevention and Control of

Industrial Pollution

5. Editorial Board Member of Indian Chemical Engineers Journal

6. Indian Chemical Technology Journal

7. Journal of Hazardous Materials (Elsevier)

8. Institution of Engineers (India) Journal

FOREIGN VISITS

1. Visited University of New Brunswick, Fredericton, CANADA during the period May 15, 2006

to June 28, 2006 under Short Term Fellowship Program and worked with Prof. Ying Zheng and

Dr. B.V.Reddy in the field of Gasification, Combustion and pyrolysis of Bio mass. The funding

is provided under Technical Education Quality Improvement Program (TEQIP).

2. Visited University of Louisville, USA during the period of 27th

August to 10th

September, 2007

under Faculty Development Program and worked with Prof. M. Sunkara in the field of

Characterization of Fly ash and other adsorbents using SEM and TEM in at Advanced Material

Synthesis and Characterization Laboratory, Department of Chemical Engineering, University of

Louisville, Louisville, Kentucky-40292, USA. The funding is provided under Technical

Education Quality Improvement Program (TEQIP).

3. Visited University of Hamburg- Harburg, Germany to attend Nineth International Conference on

Circulating Fluidized Beds, held at Hamburg, Germany during the period of 13 th to 16th

May,

2008. The funding is provided under Technical Education Quality Improvement Program

(TEQIP).

4. Visited University of Western Ontario, Canada during 15th

March 2009 to 28th

March 2009 and

participated in interactive research program with research team of Prof. J. Zhu in the area of

Circulating Fluidized Bed Technology.

5. Visited National University of Singapore, Singapore during 15th

June 2009 to 20th

June 2009 and

participated in joint research program with Prof. Panduranga in the area of Molecular

Thermodynamics.

6. Visited West Virginia University, Morgantown, USA during 22ns Sept‟ 2016 to 10th

Oct‟2016

and delivered departmental Seminar in Department of Chemical and Biomedical Engineering,

WVU, USA on 30th

Sept‟2016.

20. Contact Information of Three Referees 1. Prof. S. Ramachandram, Hon. Vice Chancellor, Osmania University, Hyderabad

Contact No; 9491382932

2. Dr. K V Raghavan, Former Director, IICT, Habsiguda, Hyderabad

Contact No: 9000102773

3. Prof. Ch. Sailu, Former Principal and Member, TSPSC, Hyderabad

Contact No: 9849636589

---xxx---

Documents

Resume of Dr. V Venkata Basava Rao