Embed Size (px)
Citation preview
Page 1 of 6
Resume
Contact Details
Bruce Hood
0475 433 782
Career Objectives
Summary: An experienced and competent Safety, QA, and Environmental
management systems professional looking for a challenging
position that will enable me to fully utilise my skills in HSEQ
systems management.
Education/Qualifications
Certificate IV in Work Health and Safety
Pinnacle Safety and Training
Member of the National Safety Council of
Australia
Safety Leadership ABB Australia
Lead Auditor - Quality Management
Systems
PE Handley-Walker
Lead Auditor - Environmental
Management Systems
SAI Global
Occupational Health & Safety
Management
Noel Arnold & Associates Pty Ltd
Advanced Workplace Trainer
Outer Eastern TAFE
Project Management
Australian Institute of Management
Workplace Assessor
Australian Chamber of Manufacturers
Statistical Quality Control
Western Metropolitan College of TAFE
Advanced Statistical Quality Control
PQ Systems Corp.
Workplace Trainer
Northern Metropolitan College of TAFE
Supervision Certificate
Northern Metropolitan College of TAFE
Avionics Technician
Royal Australian Air Force
Page 2 of 6
Employment History
Kingston City Council May 2016 - Present
Position Title:
Safety Systems Officer
Responsibilities and Accountabilities
: Assist in developing, implementing and maintaining an effective Contractor
Management system compliant with the requirements of current OHS
legislation and Council procedures.
Ensure the continuous compliance of contractors with Council requirements by
conducting periodic review of submitted documentation.
Participate in HSE Committee meetings.
Proactively assist in the continuous improvement of the hazard identification
and risk assessment strategy.
Carry out and participate in OHS compliance audits, investigate incidents,
identify root causes, and monitor the progress of corrective and preventative
actions.
Engenco Limited Nov 2014 – May 2015
Position Title:
HSEQ Coordinator,
6 Month Contract Position
Responsibilities and Accountabilities
: Assist in developing and implementing a standard HSEQ Management system
throughout the Engenco group of companies.
Complete Job Safety Analyses (JSAs) and Safe Work Method Statements
(SWMS) for all tasks at Gemco Dynon Maintenance facility.
Train Maintenance staff to carry out JSAs and create SWMSs.
Assist Management to complete Safety Interface Agreements with customers.
Participate in workplace safety meetings.
Bring safety and quality issues to the attention of the site Manager and Group
HSEQ Manager.
Proactively assist in the continuous improvement of the hazard identification
and risk assessment strategy and product quality.
Develop, maintain and monitor compliance of HSEQ requirements and
manage site nonconformance issues, investigations and resolutions in
accordance with the HSEQ system.
Page 3 of 6
Maintain knowledge of HSE&Q compliance legislation, guidance notes, Codes
of Practice, Australian Standards, Company policies and procedures
Carry out and participate in compliance and certification HSE&Q audits,
investigate incidents and non-conformances, identify root causes, and
monitor the progress of corrective actions for the site.
Review and improve on the existing HSEQ System to ensure continued
compliance with relevant ISO standards and legislative requirements.
ABB Australia Ltd. July 2006 - May 2014
Position Title:
HSEQ Coordinator,
High Voltage Components, Power Products Division
Responsibilities and Achievements
: Promote and instil a safety culture that ensures safe working practices and
programs are developed and maintained throughout the organisation in
accordance with AUABB HSEQ system. Ensure accountability and high-level
safety performance throughout the organisation which promotes early
intervention & injury management.
Act as an information conduit to bring safety and quality issues to the
attention of the site CEO’s, BU’s, National HSE manager and National Opex &
Quality Manager to deliver safety information to the site staff, contractors and
stakeholders.
Proactively assist in the continuous improvement of the hazard identification
and risk assessment strategy and product quality.
Develop, maintain and monitor compliance of HSEQ requirements and
manage site nonconformance issues, investigations and resolutions in
accordance with the HSEQ system.
Responsible for site Health and Wellness programmes in line with HSE
business plans
Maintain knowledge of HSE&Q compliance legislation, guidance notes, Codes
of Practice, Australian Standards, Company policies and procedures
Collate, analyze and report, site HSEQ lead and lag data for management
review, compliance requirements & Group requirements.
Carry out and participate in compliance and certification HSE&Q audits,
investigate incidents and non-conformances, identify root causes, and
supervise corrective actions for the site.
Roll out HSEQ training for AUABB employees and contractors in accordance
with the site training matrix.
Maintain communication and consultation systems to promote HSEQ learning
(tool box meeting, HSE Committee meetings, SOT’s) across the sites.
Coach Management to achieve HSEQ compliance and lead a culture of zero
Page 4 of 6
harm and zero defects.
Lead and support the early return to work of injured employees.
Review and improve on the existing HSEQ System to ensure continued
compliance with relevant ISO standards and legislative requirements.
Conduct periodic internal HSEQ System audits to ensure continued compliance
to the standards.
Implement and maintain a continuous improvement program
Conduct HSEQ system audits of key suppliers.
Assist in the management and documentation of major projects.
Cleared all non-conformances issued by the certifying authority and evolved
the system to the point of having no non-conformances observed for the
period from 2008 to 2014.
Designed and implemented several database functions, using Microsoft Access
database, that include a training database, ECNs and Repair Returns.
Innovonics Ltd. Feb 1998 - June 2006
Position Title:
Responsibilities and Achievements:
Quality Assurance Manager / Project Manager
Review and improve on the existing Quality System to ensure continued certification to AS/NZS ISO9001:1994 standard.
Conduct periodic internal quality system audits to ensure continued compliance to the standard.
Implement a continuous improvement program
Conduct quality system audits of key suppliers.
Assist in the management and documentation of major projects.
Develop and implement an Occupational Health and Safety program that conforms
to the requirements of the Victorian Workcover Authority.
Cleared all non-conformances issued by the certifying authority and evolved the
system to the point of having a completely clean report at the surveillance audit in
September ’99.
Designed and implemented several database functions, using Microsoft Access
database, that include on-line entry and reporting for production administration
activities such as Works Orders, Shippers, Repair Orders and a corrective action
system.
Page 5 of 6
Developed a safety program in accordance with the requirements of the SafetyMAP
system. This involved writing procedures, designing forms, forming a Safety
Committee, writing a training manual for OH&S and implementing a training
program for all staff.
Revised the existing Quality system and successfully achieved accreditation to the ISO9001:2000 standard.
Telspec Pty. Ltd Position/Title: Quality Assurance Manager / OHS Coordinator
VDO Instruments Australia Pty Ltd. Position/Title: Production Supervisor / Production Engineer
Page 6 of 6
Computer Skill Summary
MS Access
MS Excel
MS Word
Power Point
Outlook
Photoshop
Visio
SAP Enterprose Management System
Sharepoint
iPROLIVE Contractor Management System
Rapid Contractor Management System
Referees
Catherine King
Country Health, Safety & Environment Manager
Mobile: 0466 142 388
Email: [email protected]
John Higgins
Power Products Service, HSEQ Systems Manager
Mobile: 0449 955 258
Email: [email protected]
Steve McIntosh
General Manager - HV Components
ABB Australia Pty Limited, Power Products Division
Phone: +61 3 9735 7315
Mobile: +61 417 557 005
email: [email protected]
Web: www.abb.com/powercapacitors
