Upload
troy-contreras
View
19
Download
0
Tags:
Embed Size (px)
DESCRIPTION
ResponseCard XR Creating Tests and Homework. Navigating the Menu. Press the MENU button to bring up the main menu. Press the down arrow twice to select the Test/Homework Menu. Navigating the Menu. Press Enter to go into the Test/Homework Menu. Test/Homework Mode. - PowerPoint PPT Presentation
Citation preview
ResponseCard XRCreating Tests and Homework
ResponseCard XRCreating Tests and Homework
Navigating the Menu
Press the MENU button to bring up the
main menu.
Press the down arrow twice to
select the Test/Homework
Menu.
Navigating the Menu
Press Enter to go into the
Test/Homework Menu
Test/Homework Mode
Test/Homework Mode is
momentarily displayed
Create a New Session
Press 1 to create a new
Test/Homework session.
Enter Control Number
A control number is an
identifier just for you so that you
can identify each homework
assignment stored on the
ResponseCard.
Use the left and right arrows and the SEL button
to enter a control number of your choice.
A control number that starts with 1 cannot be edited
later.
Enter Control Number
A control number can be any
combination of one to four letters or numbers.
Here, we have identified this
session as our MATH homework.
Accept Control Number
Once you are satisfied with the control
number, press the Enter key.
Accept Control Number
The ResponseCard will
prompt you to verify you have
entered the correct control code.
Press YES to accept this code, NO to
edit it.
Answer the Questions
The first question is displayed (001)
Answers can be in any format: Multiple Choice
NumericFill-in-the-Blank
Use the Ans Mode button to toggle between
the different answer modes.
Multiple Choice
The default Ans Mode is multiple choice or single
number answers.
This is indicated by the 1 in the top bar
of the display.
The question is answered by pressing
any one of the numbered keys.
Pressing Ans Mode again will
toggle to the next mode.
Numeric Mode
The next Ans Mode is numeric
entry. This is indicated by the
123 in the top bar of the display.
Pressing Ans Mode again will
toggle to the next mode.
You can now enter numbers, decimals
and +/- but you must press Enter when you are done to complete
the answer.
Alpha-Numeric Mode
The next Ans Mode is alpha-numeric entry.
This is indicated by the 123 ABC in the top bar of the
display.
Pressing Ans Mode again will
toggle to the next mode.
You can enter letters and numbers as you did when setting up
your ResponseCard. You must Enter
when you are done to complete the
answer.
Single Letter Mode
The final Ans Mode is single
letter entry. This is indicated by the A in the top
bar of the display.
Pressing Ans Mode again will
toggle to the next mode.
The question is answered by
pressing one of the keys labeled A
through J. You do not need to press
Enter!
Answering Single Letter Mode
If the answer to a multiple choice
question is C, then make sure you are in single letter mode and press the C key.
Answering Single Letter Mode
You will see the answer, followed by the indication
that the ResponseCard is storing the data.
(The single entry mode for numbers is the
same.)
Answering Single Letter Mode
Once the answer is
stored, you are automatically
advanced to the next question.
Answering Numeric
If the next question
requires a numeric answer,
then toggle to numeric answer
mode.
Answering Numeric
If the answer to the question is
1.34, then press those keys
(press them on the image at right).
Answering Numeric
Next, you must press the
Enter key to accept this
answer.
You will momentarily see the ‘Storing…’
message and the ResponseCard will advance to
the next question.
(The alpha-numeric mode is the same.)
Finishing the Test
When you are done with the
entire assignment,
press the MENU button, also labeled
Start/End Test.
Then press YES.
Save or Send?
After finishing the test, you
can:
1. Immediately upload the test to the receiver if instructed to do so.
2. Save the data for later (if you’re doing homework and not in class).
3. Forget the whole thing and delete all of the work you just did!
Saved Test
If you have chosen to save the test, you will
receive the message that the Test was
saved successfully.