Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Engineered forcomfort anddurability
Respiratory Protection3M™ Reusable Respirators
XXXXXXXXXX
2
As one of the world’s leading suppliers of safety and protective equipment, 3M’s goal is to ensure that we satisfy your needs through the provision of exceptional products, expertise, quality and service excellence.
Our global technology, manufacturing and knowledge network allow us to provide superior design, cross-over compatibility, expertise, comprehensive support and a continuously evolving range of safety solutions.
We provide solutions for work situations that require basic personal protective equipment (PPE) through to environments that call for the most sophisticated and comprehensive protection. Whether the customer is a tradesman, a medium-sized business or a company employing thousands of workers, 3M has a workplace safety solution to meet your needs.
If we can make your life and that of your workforce easier, healthier, safer and more productive we are moving in the right direction.
The 3M range of solutions for worker safety includes:
• Respiratory Protection • Welding Protection • Detection & Monitoring • Hearing Protection • Spill Management • Eye Protection • Worker Visibility
3M Safety brands you can trust:
Solutions forWorker Safety
33
Contents3M™ Reusable Respirators 4Identify the Hazards 5Reusable Respirator Selection Guide 6
Understanding Respiratory Protection 7
3M™ Reusable Respirators 4000 Series Half Face Respirator 96000 Series Half Face Respirator 107500 Series Half Face Respirator 116000 Series Full Face Respirator 127800 Series Full Face Respirator 13Particulate Filters 14Gas and Vapour Filters 15Starter Kits 16
3M™ Gas Diffusion Monitors 17
3M™ Qualitative Fit Test Kits 18
3M Training and Support 19
3M Contact Details 20
xxxxxx
xxx
4
Respirators3M™ Reusable
The 3M range of Half and Full Face Reusable Respirators and Filters offer excellent value and outstanding quality.
3M™ Reusable Respirators let you change your filters to protect against particulates, gases and vapours, while using the same respirator time after time. This is made possible by the unique 3M™ Bayonet Filter Fixing System which allows filters to just be clicked into place.
3M’s wide range of respirators means there's one to suit almost every individual. The lightweight 3M™ Half and Full Face Respirator 6000 Series offers safety, comfort and ease of use, while the 3M™ Half Face Respirator 7500 Series sets the standard in wearer comfort along with outstanding durability, quality and ease of use.
The Hazard and Selection Guide on pages 5 and 6 provides suggestions for which 3M Reusable Respirator and Filter to use for various applications.
3M TechAssist, available to users of 3M products, can provide advice and guidance to help you obtain appropriate respiratory protection for the task at hand.
Australian/New Zealand Standard AS/NZS 1715:2009 'Selection, use and maintenance of respiratory protective devices' provides guidance to users on the principles and requirements for effective use of respiratory protection in the workplace.
3M™ High Performance Filter MediaHigh Performance Filter Media combines the benefits of traditional mechanical filtration with advanced technology filtration to capture particles.
3M™ Bayonet Connection SystemThis unique system allows different types of filters to simply click into place ensuring precise and secure locking of the filters and cartridges to the face piece.
3M™ Cool Flow ValveAn efficient exhalation valve minimises heat and moisture build up, particularly in hot and humid work conditions.
Face SealSoft and Secure. The face seal on the 3M Reusable Respirators provides a comfortable and secure fit to most face sizes.
Advantages of 3M Reusable Respirators
5
Identify the Hazards
Industry Application Hazard Recommended
Protection
Construction Painting, Spraying, Varnishing, Coating
Solvent-Based Paint
A1P2 Solvents, Resins, Synthetic Resins
Latex-Paint, Residual Solvents
Spray-On Glue, Foam, Varnish, Adhesive
Metal Fabrication
Welding, Metal cutting, Metal pouring, Soldering, Brazing
Metal fumes P2
Welding - TIG, MIG and otherMetal fumes, ozone gas Nuisance levels of organic vapours
GP2
Agriculture
Spraying low vapour pressure*** pesticides, herbicides or fungicides
Organic Vapour, mist, dust GP2
Mixing pesticide, herbicide or fungicide or spraying organic vapours
Organic Vapour, mist, dust A1P2
Automotive
Cleaning or using organic solvents, degreasing, paint thinners and glues
Organic Vapour A1
Hand applicaton* of 2-Pack type paints Isocyanates A1
Fibreglass
Laying up
Epoxy and polyester resin, amine & anhydride hardner Methy Ethyl Ketone Peroxide (MEKP), styrene vapour A1P2
Using a chopper gun Glass fibre, dust, resin and styrene vapour
Spray painting & Cleaning moulds Organic vapour and mist
Maintenance Disinfection, CleaningOrganic Vapour, mist, dust A1P2
Organic Vapour, formaldehyde, mist, dust ABE1P2
Other Handling:
Ammonia (NH3)** K
Bacteria, Spores, Odours GP2
Hydrochloric Acid vapour or mist** ABEP2
Petroleum Solvents A2
Sulphur Dioxide ** ABE
Sulphuric Acid (H2SO4)** P2
Hazardous goods storage/transport ABEKP3
* For protection from Isocyanates when spraying polyurethanes/2 Pack, please contact the 3M TechAssist Helpline
** Also need to consider eye/face/skin protection
*** Low vapour pressure < 1.3Pa @ 25°C
P3 protection is only achieved on a full face mask.
Application limits for Gas & Vapour respirators (AS/NZS1715): - Half masks can be used up to 10 times the relevant Exposure Standards (ES) or up to 1000 ppm, whichever limit is reached first. - Full face masks can be used up to 100 times the ES with a Class 2 filter or up to 5000 ppm, whichever limit is reached first. - A1 and A2 Filters are designed for use with organic vapours with a boiling point above 65°C. - AX Filters are used for organic vapours with a boiling point under 65°C. Note: 3M™ AX Filters are single use and can only fitted to 3M™ Full Face masks.
This selection guide is only an outline designed to focus on products which may be appropriate for typical applications - it should not be used as the only means of selecting a product. Selection of the most appropriate personal protective equipment (PPE) will depend on the particular situation and exposure levels and should be made only by a competent person knowledgeable of the assessed risks, actual working conditions and limitations of PPE. Details regarding performance and limitations are set out on the product packaging and user information. If in doubt, contact a safety professional or 3M. For respiratory training and advice please contact your local 3M representative.
6
Respirators3M™ Reusable
6035 P3 2125 P2
6051 A16055 A26054 K1
6057 ABE16059 ABEK16075 A1+Form
2135 P3
Gas & Vapour Protection only
Combined Particulate +Gas & Vapour Protection
Select the Right Respirator and Filter
6051 A16055 A26054 K1
5015925 P25935 P3
6057 ABE16059 ABEK16075 A1+Form
6096 A1HgP36098 AXP3*6099 ABEK2P3*
6038 P3(HF) 2138 GP3
ParticulateProtectiononly
2128 GP2
4251 A1P2
4277 ABE1P2
4255 A2P2
4279 ABEK1P2
Combined Particulate + Gas & Vapour Protection
Ready to use, Maintenance free
* For use with Full Face Masks only by 3M
7
Why do I need to replace my 3M™ Filters regularly?Particulate filters get clogged up and become harder to breathe through.
Gas and vapour cartridge filters start to let contaminant through once their
sorbent becomes saturated. This is called breakthrough.
How do 3M™ ParticulateFilters work?These filters are enhanced with electrostatically charged fibres to trap
particulates within the filter media.
As particulate filters load up with the contaminant, they typically become
more efficient; however, they also become harder to breathe through.
AS/NZS 1716 uses a classification system to identify the different types of
particulate protection required:
When do I replace my 3M™ Particulate Filters?+ When it becomes difficult to breathe comfortably. (this will vary from
individual to individual).
+ When the filter becomes dirty or physical damage occurs.
How do 3M™ Gas & Vapour Filters work?These filters rely on sorbent material to “soak up” the gas and vapour
molecules.
Typically the sorbent is carbon grain, which has been specifically treated.
Depending on the chemical treatment of the carbon surface, this material
will absorb different types of gases or vapours.
AS/NZS 1716 uses a classification system to identify the different types of
contaminants these treated carbon grains will capture e.g. A, B, E, K, Hg
and G.
P1Particles generated by mechanical processes e.g. grinding, sanding
P2Particles generated by mechanical and thermal processes e.g. welding
P3 All Particles including highly toxic materials
A Organic Vapours (bolling point > 65˚C)
B Inorganic Gases
E Acid Gases
K Ammonia
Hg Mercury
G Organic Compounds with low vapour pressure
8
Respirators3M™ Reusable
When do I Replace 3M™ Gas & Vapor Cartridges?The service life (i.e. how long it will last) of any gas and vapour
cartridge filter is affected by many factors, including:
concentration and identity of contaminants, breathing rates, humidity
levels, temperature, carbon type and exposure time.
Replace both the 3M™ Gas & Vapour Cartridge Filters:
+ When the expiry date stamped on the sealed packet has elapsed.
+ Once opened, maximum use time is 6 months (even if not used). The carbon will absorb contaminants from the general environment.
+ When contaminant can be detected by smell or taste.
+ In accordance with your established Filter Change Schedule.
To avoid smelling or tasting the contaminant when using 3M™ Gas & Vapour Cartridge Filters, take the following steps:
+ When you get a new pair of 3M Gas & Vapour Cartridge Filters check the expiry date on the back of the pack.
+ Record the date on the filters when first removed from the pack.
+ Use the filters on your respirator in your normal work environment.
+ If at any time you smell or taste the contaminant or irritation is detected, the filters need replacing.
+ Take note of how long the filters lasted by comparing the date recorded on the filter and the current date.
+ If work practices remain the same and the levels of vapours/gases are consistent, replace your filters on a more regular timescale:
+ Or in accordance with your established Filter Change Schedule.
Frequently AskedQuestionsHow should I store my 3M™ Reusable Respirator and
Filters?
When not in use, your 3M™ Respirator and Filters should be kept clean
and dry, and away from oil, sunlight and chemicals to avoid deterioration. A
sealable storage container or should be utilised for this purpose.
Why do I need to use a Particulate Filter with my Gas &
Vapour Cartridge Filters for some applications?
The particulate filter removes the tiny droplets or particles in the air (e.g.
mists from spray painting). The gas and vapour cartridge filters do not filter
these particles. If no particulate filter is used, they could be breathed in.
What is a Fit Test?
Because everyone’s face is different, a fit test is used to determine an
adequate match between the face piece of a respirator and the face of the
wearer. Ideally this should be done before the respirator is first issued and
then at regular intervals. See AS/NZS1715 for details on fit testing.
Can I wear a respirator with a beard?
Any facial hair has the potential to break the face seal of a respirator,
letting contaminants leak into the mask. We recommend that people
wearing respiratory protection be clean-shaven, to enable the respirator to
achieve a good seal against the face.
9
3M™ Half Face Respirator 4000 SeriesFeatures and Benefits:
Facepiece+ Low profile design for better peripheral vision+ Lightweight, well balanced design+ Soft, non-allergenic material with textured
face seal
Built In Filters+ Unique bonded carbon
Exhalation Valve+ Central position for effective removal of heat
and moisture build up within face piece
Adjustable Head Cradle and Neck Straps + Stable secure fit+ Easy to fasten neck strap
Cost Effective+ Use until damaged, particulate filters clog or
gas filters become saturated + One piece, maintenance free construction
Convenience+ Resealable bag provides convenient and clean
storage between uses
3M™ Half Face Respirator 4000 SeriesThe 4000 Series Respirators by 3M are a range of ready-to-use,
maintenance-free half masks designed for effective and comfortable
protection against a combination of many gases, vapours and particulate
hazards found throughout industry. Unique filter techno logy enables
a very low-profile design for undisturbed field of vision to make your
worklife more comfortable.
3M™ 4255 (A2P2) Organic vapour + Particulate respirator
3M™ 4251 (A1P2)Organic vapour + Particulate respirator
3M™ 4277 (A1B1E1P2) Organic vapour / Inorganic + Acid gas / Particulate respirator
3M™ 4279 (A1B1E1K1P2)Organic vapour / Inorganic + Acid gas / Ammonia / Particulate respirator
10
Respirators3M™ Reusable
The 6000 Series Reusable Half Masks by 3M are economical, low-
maintenance, simple to handle and extremely lightweight. Available
in three sizes, all masks have the 3M™ Bayonet Connection System
allowing connection to a broad range of twin filters to protect against
gases, vapours and particulates depending on your individual needs.
6000 series half masks by 3M can also be used with 3M™ Supplied
Air Systems for your increased convenience and flexibility.
3M™ Half Face Respirator 6000 Series
Features and Benefits:
Head Harness+ Cradle suspension for
comfortable fit+ Easy to fasten neck strap
Lightweight Elastomeric Face Piece+ Lightweight elastomeric
material for comfort during long periods of work
Low-Profile Design+ Minimises interference with
field of view+ More simplicity for easy handling+ A variety of spare parts available
Filter Connection+ Twin filter design provides lower
breathing resistance+ Even weight distribution and
balanced fit+ Safe and secure fit+ Optical marking of attachment point+ Flexible system for gas, vapour,
particulate filters + Optional supplied-air connection (SA-2000 or
SA-2100)
3M™ Half Face Respirator 6000 Series3M 6100 – small (light grey) 3M 6200 – medium (grey) 3M 6300 – large (dark grey)
3M™ Drop Down Half Face Respirator 6000 Series
Ideal for workers who wear a hardhat and need to frequently remove the respirator without removing the hardhat.
6200DD - medium6300DD - large
11
3M™ Half Face Respirator 7500 Series3M™ 7500 Series Reusable Half Masks have set a new standard in
comfort. The patented exhalation valve provides increased durability
and is easy to keep clean. Reduced breathing resistance helps
minimise heat build-up in the mask and increases your comfort.
Available in three sizes, all masks have the 3M™ Bayonet Attachment
System offering a broad range of twin lightweight filters to protect
against gases, vapours and particulates depending on your individual
needs and can also be used with 3M™ Supplied Air Systems.
Features and Benefits:
Head Harness+ Balanced, secure fit+ Reduced pressure and tension points+ Drop down feature for added convenience
during breaks
Face Piece+ Soft silicone material for comfort and durability+ Thin nose bridge area for more comfort+ Quick release for maintenance
Patented 3M™ Cool Flow Exhalation Valve+ Less exhalation resistance+ Easier breathing+ Less heat and sweat build-up+ Eliminates valve vibration+ Downwards flow of exhaled air+ Stays clean
Low-Profile Design+ Minimises interference with field of view+ Reduced fogging with eye protection+ Sleek look and feel+ Full range of spare parts available
Filter Connection+ Twin filter design provides lower
breathing resistance+ Even weight distribution and
more balanced fit+ Safe and secure fit+ Optical marking of attachment point+ Flexible system for gas, vapour,
particulate filters + Optional supplied-air connection (SA-2000 or
SA-2100)
3M™ Half Face Respirator 7500 Series 3M 7501 – small (light blue)3M 7502 – medium (blue) 3M 7503 – large (dark blue)
3M™ Respirator Cleaning Wipe 504Packaging: 100 wipes/box
The 504 Cleaning Wipes are alcohol-free pre-moistened towelettes for cleaning all reusable respirators without damaging them.
12
Respirators3M™ Reusable
3M™ Full Face Respirator 6000 SeriesThe 6000 Series Full Face Masks are simple to handle and comfortable
to the wearer. The exhalation port provides increased durability and is
easy to keep clean. Available in three sizes, all masks have the
3M™ Bayonet Connection System enabling connection to a broad
range of twin lightweight filters to protect against gases, vapours and
particulates depending on your individual needs.
3M™ Full Face Respirator 6000 Series3M 6700 – small (light grey)3M 6800 – medium (grey)3M 6900 – large (dark grey)
Features and Benefits:
Full Face Piece+ Soft, non-allergenic elastomeric face piece+ Extremely lightweight (400 grams)
for high comfort
Full Face Lens+ Broad field of vision+ Polycarbonate lens, molten metal and high
impact resistant to AS/NZS 1337
4 Strap Head Suspension+ Easy to put on and take off+ Well balanced
Patented 3M™ Cool Flow Exhalation Valve + Low exhalation resistance+ Reduced heat build-up+ Eliminates valve vibration+ Downwards flow of exhaled air+ Minimised dirt-traps to stay clean
Filter Connection+ Twin filter design provides lower
breathing resistance+ Even weight distribution and
balanced fit+ Safe and secure fit+ Optical marking of attachment point+ Flexible system for gas, vapour,
particulate filters + Optional supplied-air connection (SA-2000 or
SA-2100)
3M™ Anti-Fog Wipe 505Packaging: 100 wipes/box
Featuring 3M super-hydrophilic patented technology, the 3M Anti-Fog Wipe 505 is designed to provide wearers with an anti-fogging solution for eyewear, full face respirators, face shields, and powered and supplied air head tops to enable clearer field of view and increased safety for wearers.
13
The 3M™ 7800 Full Face Mask offers durability and safety for
demanding tasks that require face and respiratory protection.
The 3M™ Bayonet Connection System offers a broad range of twin
lightweight filters to protect against gases, vapours and particulates
depending on your individual needs.
The 7800 full face mask by 3M can also be used with Supplied-Air
Systems by 3M for your increased convenience and flexibility.
3M™ Full Face Respirator 7800 Series
3M™ Full Face Respirator 7800 SeriesFeatures and Benefits:
Six Strap Head Harness+ Easy and secure fit for
maximum safety+ Provides greater stability+ Easy release buckles
Full Face Lens+ Large polycarbonate lens + Spectacle kit and lens covers
available
Facepiece+ Double face seal for safe,
secure fit to most face sizes
+ Durable silicone rubber+ Highly durable+ Complete range of
consumables available+ Speech Diaphragm for
improved communication
Filter Connection+ Twin filter design provides lower
breathing resistance+ Even weight distribution and
balanced fit+ Safe and secure fit+ Optical marking of attachment point+ Flexible system for gas, vapour,
particulate filters + Optional supplied-air connection
3M 7800S(M) - medium3M 7800S(L) - large
14
Respirators3M™ Reusable
3M™ Particulate FiltersThe 3M™ Particulate Disc Filters 2000 series and the 3M™ Particle
Filters 5000 series and Retainers attach to the 3M™ Half and Full Face
Respirators to provide particulate protection.
These dual filters provides low breathing resistance and excellent field
of vision. Made from 3M™ High performance filter media, they offer
effective filtration efficiency and are light weight.
Connecting by the 3M™ Bayonet Fixing System, these filters simply
click into place to ensure precise and secure locking.
Product Code DescriptionFilter
Rating
2125 Particulate P2
2135 Particulate P2/P3
2128 Particulate, Ozone & Agricultural type Organic Vapours with low vapour pressure, Nuisance level Acid Gas (GP2)*
GP2
2138 Particulate, Ozone & Agricultural type Organic Vapours with low vapour pressure, Nuisance level Acid Gas (GP2/GP3)*
GP2/GP3
2076 Particulate & Hydrogen Fluoride P2HF
6035 Particulate P2/P3
6038 Particulate, Hydrogen Fluoride, Nuisance level Organic Vapour and Acid Gas
P2/P3HF
5925 Particulate P2
5935 Particulate P3
501 Particulate filter retainer, to hold the 5925 and 5935 filter
*Nuisance levels are those levels below the Safe Work Australia Exposure Standards.
15
3M™ Gas and Vapour FiltersThe 3M™ 6000 Series filters attach to 3M™ Half and Full Face
Respirators to provide gas and vapour protection.
These filters are lightweight and well balanced when fitted to a mask.
The unique trapezoidal shape provides excellent field of vision and the
3M™ Bayonet Fixing System ensures precise and secure locking.
Product Code DescriptionFilter
Rating
6051 Organic Vapours(boiling point > 65ºC)
A1
6055 Organic Vapours(boiling point > 65ºC)
A2
6057Organic Vapours, (boiling point > 65ºC) Inorganic & Acid Gases A1B1E1
6054 Ammonia and Methylamine K1
6075 Organic Vapours and Formaldehyde A1Form
6059Multi-Gas: Organic Vapours, (boiling point > 65ºC), Inorganic and Acid Gases, Ammonia & Methylamine
A1B1E1K1
6096Organic Vapours (boiling point > 65ºC), Metallic/Inorganic Mercury Vapours, Chlorine Gas, Particulates
A1HgP3
6099Mulit-Gas & Particulates: Organic Vapours (boiling point > 65ºC), Inorganic & Acid Gases, Ammonia, Methylamine & Particulates
A2B2E2K2P3
60926Mulit-Gas & Particulates: Organic Vapours (boiling point > 65ºC), Inorganic & Acid Gases, Ammonia, Methylamine, Formaldehyde & Particulates
A1B1E1K1 FormHF/P3
6098 Low Boiling Point Organic Vapours (boiling point < 65°C) and Particulates
AXP3
16
Respirators3M™ Reusable
3M™ Half Face Respirator Starter KitsThese Starter Kits have been designed to provide maximum comfort
and effective respiratory protection against organic vapours/solvents
and particles during spraying, mixing and cleaning applications and all
types of welding (MIG/MAG, TIG, Stick).
3M™ Half Face Respirator Starter Kit 7502SKKit includes:
+ 1 3M™ Half Face Respirator 7502, Medium
+ 1 pair of 3M™ Organic Vapour Filter Cartridges 6051, A1
+ 3 pairs of 3M™ Particulate Filters 5925, P2
+ 1 pair of 3M™ Particulate Filter Retainers, 501
+ 2 sachets of 3M™ Respirator Cleaning Wipes, 504
+ 1 pair of 3M™ Soft Foam Earplugs 1120, Class 4
3M™ Half Face Respirator Starter Kit 6200SKKit includes:
+ 1 3M™ Half Face Respirator 6200, Medium
+ 1 pair of 3M™ Organic Vapour Filter Cartridges 6051, A1
+ 3 pairs of 3M™ Particulate Filters 5925, P2
+ 1 pair of 3M™ Particulate Filters Retainers, 501
+ 1 pair of 3M™ Soft Foam Earplugs 1120, Class 4
3M™ Welder’s Respirator Starter Kit 7502WRKKit includes:
+ 1 3M™ Half Face Respirator 7502, Medium
+ 2 pairs of 3M™ Particulate Filters 2128,GP2
+ 2 sachets of 3M™ Respirator Cleaning Wipes, 504
+ 1 pair of 3M™ Soft Foam Earplugs 1120, Class 4
Product Code: 7502SK
Product Code: 6200SK
Product Code: 7502WRK
17
3M™ Gas Diffusion Monitors3M™ Gas Diffusion Monitors are simple and effective devices that
collect certain airborne contaminants using the principle of diffusion.
They assist in the assessment of exposure to workplace contaminants,
both personal and background. These monitors are easy to use and
simply clip onto the shirt, collar or pocket.
3M™ Organic Vapour MonitorUses a single wafer carbon sorbent for collecting organic vapours. The 3500 can be used for most applications, particularly suited to routine sampling of exposures to common solvents such as Toluene, Xylenes, Styrene, Naptha and White Spirits.
3M™ Organic Vapour Monitor with Backup SectionUses a dual layer carbon sorbent for collecting organic vapours. Especially suited for monitoring compounds such as vinyl chloride, acrylonitrile, methylene chloride and butadiene for which activated carbon shows limited capacity. The 3520 has 2 layers for increased sampling capacity. Increased capacity may be necessary when sampling volatile compounds (compounds with low boiling points), high or unknown concentrations, complex mixtures or when sampling in high humidity.
3M™ Ethylene Oxide MonitorDesigned for measuring exposures to Ethylene Oxide such as those in the pharmaceutical, health care and chemical industries. The 3351 utilises brominated carbon to collect and convert reactive ethylene oxide to a more stable derivative called 2-bromoethanol. They can be used for 15 minute STEL sampling.
3M™ Formaldehyde MonitorDesigned for measuring exposures to Formaldehyde such as those in the chemical, pulp and paper, foundry and textiles industries. The 3721 uses an impregnated filter to convert formaldehyde to a stable bisulfite addition product.
Product Code: 3500Packaging: 10 monitors /case
Product Code: 3500BPackaging: 50 monitors /case
Product Code: 3520Packaging: 5 monitors /case
Product Code: 3520BPackaging: 50 monitors /case
Product Code: 3551Packaging: 5 monitors /case
Product Code: 3721Packaging: 5 monitors /case
18
& Full Face Masks3M™ Reusable Respirator
Features and Benefits
+ Offers a fast and easy method for performing qualitative fit testing
+ No calibration of equipment required
+ No modification of facepiece required
+ Test operator can be self-taught/instructed
+ Each kit contains a hood and collar assembly, two nebulisers, sensitivity solution, test solution and detailed instructions
+ Replacement solutions and accessories can be purchased separately
+ Available with Sweet (FT-10) or Bitter (FT-30) solutions
3M™ Qualitative Fit Test KitsThe biggest contributor to reduced respiratory protection is poor fit.
Conducting a fit test to ensure that a respirator with a tight fitting
facepiece provides an adequate seal to the wearer’s face has long been
considered best practice as part of a general respiratory protection
program.
Reflecting this, a fit test for wearers of respiratory protection is now
required for compliance to AS/NZS1715:2009.
The 3M Qualitative Fit Test apparatus FT-10 and FT-30 are designed
for fit testing disposable and half face reusable respirators fitted with
particulate or combination gas/vapour and particulate filters.
3M™ Qualitative Fit Test Apparatus
FT-10 Qualitative Fit Test Apparatus Kit - Sweet (Saccharin)
FT-30 Qualitative Fit Test Apparatus Kit - Bitter (Bitrex)
Packaging FT-10 & FT-30: 1 kit/case
Sensitivity & Fit Test Solutions
FT-11 Sensitivity Solution (sweet)
FT-12 Fit Test Solution (sweet)
FT-31 Sensitivity Solution (bitter)
FT-32 Fit Test Solution (bitter)
Packaging for all solution:55ml bottle, 6 bottles/case
Accessories
FT-13 NebuliserPackaging: 3/case
FT-14 Test HoodPackaging: 5/pack
FT-15 CollarPackaging: 1/case
19
Training and Support3M’s team of Certified Occupational Hygienists and Technical Specialists offer support and training to meet the needs of our customers.
They can provide customers:
• Initial and ongoing technical support • Advice and training for your company, including audits for your workplace • Coordination of fit testing for respiratory and hearing protection
No matter how effective a piece of PPE is, it will offer little or no protection if it is not fitted and worn correctly. Proper inspection, cleaning and storage is vital for safety equipment that protects a worker's health and well being.
That is why 3M offers training programs that explain the correct way to fit, inspect, clean and store the PPE designed and manufactured by our company.
Our Specialist Field Representatives are trained and can provide Certificate IV style workplace training. They can provide quality onsite training and ongoing support.
3M TechAssist3M TechAssist is the ideal point of contact for your questions, especially when you require a prompt answer. Supported by trained staff, Tech Assist is an immediate link to the worldwide resources of 3M.
Customers can contact TechAssist to answer questions on product information, technical advice, guidance with product selection, Australian Standards and other important information they may need to know on a day-to-day basis.
You can contact 3M’s TechAssist service by ringing the free TechAssist Helpline on 1800 024 464 or by email at [email protected]
Nationwide Distributor Network3M distributes our wide range of workplace safety products through a distributor network which includes over 250 stores and branches throughout Australia. To find a 3M safety distributor near you, visit our website www.3m.com/au/ohs or ring 3M customer service on 1300 363 565.
Occupational Health and Environmental Safety Division3M Australia Pty LimitedABN 90 000 100 096950 Pacific HighwayPymble NSW 2073
© 3M 2010. All rights reserved.Please recycle. Printed in Australia.
E-A-R, Peltor, Speedglas, Scotchlite and Quest are trademarks of 3M
For more information about 3M Safety products or solutions please contact your 3M representative or:3M TechAssist Helpline (Mon-Fri 8.30am-4.30pm) 1800 024 464 or email [email protected] 3M Australia Customer Service 1300 363 565Website www.3m.com/au/ohs