7/27/2019 Research Projects in Manufacturing
1/1
Research projects in Manufacturing
1) Tool wear optimization of M2 HSS tools by cryogenic treatment
to reducing themachining cost
2) Some investigation of Electrical discharge machining on OHNS
steel with a copper andbrass electrode to increases the surface
finish and reduced the heat affected zone ,lead time
by varying machine parameter
3) Optimization of threading parameter by squeezing method with
various metals in 16mmBSW thread to increasing tensile strength
4) Experimental investigation on wear behavior of carbide insert
subjected to lowtemperature treatment to optimize tool wear
5) Experimental investigation of coated and non coated insert to
increase the surface finish ofjob at different speed and feed rate
in CNC machine
6) Analysis and evaluation in electrical wire cutting machine on
EN30 die steel to increasesthe surface finish and reduced the heat
affected zone ,lead time by varying machine
parameter
7) An experimental study on buckling and post buckling behavior
of cylindrical panels withclamped and simply supported ends
8) Experimental evaluation of Aluminum cu composite material to
increase the toughnessthermal resistance, surface finish with
different composition
9) Increasing the isothermal efficiency of the compressor by
alter the fins structure of thecylinder to maintain the constant
pressure for safety through out the system
Research project in welding
1) Some Experimental Investigation In Submerged Arc Welding
Parameter To Increase TheTensile Strength, surface finish, min HAZ
Using Various Destructive Test And FEA
2) Some Experimental Investigation In TIG Welding Parameter To
Increase The TensileStrength, surface finish, min HAZ Using Various
Destructive Test And FEA
3) Some Experimental Investigation In MIG To Increase The
Tensile Strength, surfacefinish, min HAZ Using Various Destructive
Test And FEA
4) FEA analyzing of angular distortion in universal joint of a
heavy truck while arc weldingand rectified technique by using
welding fixture for safe transmission
5) Experimental investigation in arc welding parameter to reduce
the Residual stress analysisfor avoid cold cracks
