Michael Atkins

Objective Locating employment beneficial to my Employer and myself in a difficult job market

Experience

05/12 – Present: MG Construction, Inc Salt Lake City, UTProject Manager/Sales Perform project sales and management

1/11 – 12/11 Avery Enterprizes/Steed Trucking Stanley, NDOil Field Specialist Independent contractor transporting oil field materials in North Dakota, Montana Wyoming Currently hold Idaho issued CDL

05/09 – 02/10 Dan Hola Construction Salt Lake City, UTProject Lead

Manage 2 story 7000sqft commercial project from slab to completion

11/05 – 11/08 Thomas Brooke Construction Modesto, CAProject Manager/Sales

Perform outside sales, manage projects, 1.2m in gross sales

07/01 – 10/05 Atkins Construction Rohnert Park, CA

Remodel Specialist

Estimate, repair, renovate, construct residential projects

09/00 – 05/01 Confab, Inc. Layton, UTProduction Supervisor

Manage/train personnel, develop/maintain schedules, inventory & payroll

04/00 – 09/00 James Fowler Construction, Inc. Dallas, OROperations Lead

Manage structural carpenters and laborers crews. Storm/sewer drainage installation.

Site safety supervisor, draft hazard analysis. Weekly payroll crew accounting

03/99 – 01/00 Wasatch Constructors, Inc Salt Lake City, UTOperations/Equipment Foreman

Manage installation underground fiber optics/traffic management. Production of minor drainage systems. Hazmat, Environmental team member. First responder certified

03/98 – 12/98 Wasatch Constructors, Inc Salt Lake City, UTGeneral Carpenter Foreman

Managed construction of all segment minor structures. Perform daily/weekly payroll accounting. Manage 20 + union crew

12/95 – 02/98 Grover Construction, Inc Salt Lake City, UTLimited Partner

Perform all functions in residential construction. Manage payroll, equipment, crews

209-404-0483mgaca@live.com

1108 East 1150 SouthClearfield, UT84015

01/94 – 11/95 Ore-Ida Foods, Inc Burley, IDManufacturing/Packaging Supervisor

Team Leader of Packaging Waste with direct cost savings of over $75K per year

Direct supervision of 50+ hourly employees in an multi-product union environment

01/91 – 01/94 Utah Medical Products, Inc Salt Lake City, UTManufacturing Supervisor II

Manage 45+ hourly employees in high volume multi-product cleanroom environment

Member of JIT, SPC, new product process implementation and production system controls

07/86 – 05/89 Lin Data/Nashua Computer Corporation Santa Clara, CASr. Line Maintenance Technician III/Supervisor

Assnt Team Chair SOP, SPC, Quality Control and employee training systems (production)

Supervise/Train Jr. and intermediate technicians, maintain thin film processing and support equipment. Assist equip design/modification. Perform facility maintenance.

Perform Electo-Mechanical repair from system to component level on vacuum processing and support equipment

03/85 – 05/86 Phase II Automation Redwood City, CASr. Manufacturing Technician III

Elecro-Mechanical assembly from blueprints on cleanroom robotic work cells

Complete blueprint manufacturing updates

Full system testing of completed cells

06/84 – 03/85 Westinghouse Marine Division Sunnyvale, CAMechanical Assembler II

Assembly of Trident steam turbine power plants from detailed blueprints

Use of extreme precision assembly tools, measuring equipment and

Held classified security clearance

04/82 – 06/84 EM Systems, Inc Sunnyvale, CALead Sr. Electro/Mechanical Assembler III

Perform component to full mechanical system assembly of US Military Electronic Defense Systems

Assemble/stuff/solder electronic PC boards, wire harnessing, semi-rigid microwave fabrication, PC board repair to mil-spec standards

Special Elecro-Mechanical technician assignment for NATO System used during Falklands war

Issued temporary Secret security clearance

06/81 – 05/82 San Jose State University San Jose, CASr. Equipment Technician II, Mechanical

Repair/Maintain Division of Technology lab equipment. Prepare lab samples for Professors

Installation of new lab equipment

07/79 – 04/81 Ford Aerospace & Communications, Inc Palo Alto, CAMechanical Assemble Satellite Integration/Equipment Operator II

Assemble Intelsat V / Classified satellites in class 1000 cleanroom using blueprints and direction from system engineers

Operation of in-house sheet metal and machine shop manufacturing equipment from blueprints

Use of precision measurement tools and equipment

10/78 – 07/79 Watkins-Johnson Company Palo Alto, CA

Clerical Draftsman-Plant Engineering

Maintain plant engineering utility usage and floor space records. Plan department moves

Keep all site blueprints up to date

Education:West Valley College - G.E., Production Time Management

Foothill College - Business Management, Computer Science

San Jose State Univ. - Industrial Technology, Material Management, Quality Control

Many specialized seminars and vendor equipment training courses Proficient in manufacturing, construction and computer equipment

Served 2 year Religious Mission – Michigan 1976 to 1978

Eagle Scout with 2 eagle palms