Required Tools INSTRUCTION MANUAL J1035 J2035 … N005 X4 W008 Z285 (Only for J1000) ... Short Tall 1.75 ... 3/4” wide non-slip rubber bar guards aluminum bars (press in channels)

1

PART# DESCRIPTION J1000 J2000 ITEM

S062 5/16” DOublE SlIDER 1 3/8” ----- 2

S052 5/16” DOublE SlIDER 2” 4 4

SS-b016 5/16” X 3/4” CARRIAgE bOlT ----- 4

SS-b103 1/4” X 1” AllEN buTTON HEAD bOlT ----- 8

SS-b117 5/16” X 1” AllEN buTTON HEAD bOlT 8 8

b067 5/16” X 1 1/2” HEX bOlT (TOOl) 1 1

SS-N005 5/16” NylON NuT 8 16

N012 5/16” ANCHOR 8 8

N020 5/16” ANCHOR TOOl 1 1

SS-W001 1/4” X 1/2” WASHER ----- 8

SS-W008 5/16” X 3/4” WASHER 16 24

g004 gASkET 1.5” X 4” 4 4

A285-50/60 CROSS bAR (A285) 50”, 60” 2 2

M13 CHEvy HHR MOuNTINg bASE 4 4

A04 SIDE SuPPORT (A285) ----- 4

Z285 RubbER END CAP 4 -----

A69 800MM vElCRO STRAP ----- 2

A15 ANglED ARMS 6” ----- 2

A11 lADDER STOPPER bASE ----- 2

INSTRUCTION MANUALINSTRUCTION MANUAL

J1035 J2035 J1040 J2040CHEVY HHR

Marker

Required ToolsDrill with 7/16” Drill Bit 9/16” Allen Key 1/2” Wrench

items not drawn to scale

Packaged by Date

IbO

2

Rear

Front

* Do not fully secure

S052

N005

W008X4

Z285(Only for J1000)

EZ VElcro Strap (Not iNcludEd iN J1000 SyStEmS)

How it works

(Rear cross-bar)

Insert rear cross-bar into opening of EZ-velcro straps.

Pull EZ-velcro to secure via velcro.Slide strap around equipment the through steel ring.

(ladder)

3

ShortTall

1.75”

10”

5.5”

1.5”

Marker

Marker

7/16” drill bit

4

*Secure all hardware.

7/16” drill bit

Anchor Installation

9/16”

b067

W008

N012

N020

1/2”

Collapsing Anchor may become difficult.

keep Anchor tool stationary and tighen Hex bolt.

before screwing in the bolt apply a layer of silicon over anchor to prevent leaking.

A04

Only for J2000

(A285)b103,W001

g004

X4

5

W008

b014W008

A15

N005

N005

S062 A11X2

6

Accessories | extruded Aluminum systems

Part # Description Color MSRP

A57 Adjustable Ladder Stopper 5-7” Black or White 35.00

AdjustAble lAdder stopper

Ì Adjustable 2pcs. ladder stopper prevents ladders from sliding forward.

Ì The bottom half of the stopper is galvanized and powder coated.

Ì The top is galvanized and rubber dipped for durability.

Ì The unit is bolted onto the bottom channels of the cross bar.

Part # Description Height Color MSRP

A64 Push to Secure 6-8” Black or White 69.00

push-2-secure

Ì Secure your ladder with the Vantech Push 2 Secure.

Ì System is bolted underneath cross bar. Holds ladder 6”-8” in height.

Ì Installs onto rear cross bar

Ì Works together with Ladder Stopper

Part # Height Bar Type Color MSRP

A20 5” A285, A286 Black Rubber 39.00 (pair)

A93 5” A270, A287, A613 Black Rubber 39.00 (pair)

AdjustAble Guides with eye hooks

Ì The adjustable guide slides inside the channels of the cross bar and locks into places with turn-knob

Ì Eyehook located on top for easy tie-down and bungee.

Ì 5” in height to secure item side to side.

rubber coAted site support

Ì Includes stainless steel mounting hardware.

Ì Built in Eyehook on each support

Part # Bar Type

Color MSRP

A08 A270 Black Rubber 15 pair




Part # Weight Capacity MSRP

A67 100 lb. 119.00(each)

eZ-Velcro strAp

Ì Strap a ladder with the EZ velcro straps.

Ì Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide.

Ì Loops into cross bar.

Note: Currently does not fit 286 cross bars

Part # Height Bar Type Color MSRP

A69 10” All 75 lb. 18.00 (each)

4 pc. holder with strAps

Ì Holds Kayak, surfboards and canoes

Ì Adjustable rubber padding can conform to side or bottom of equipment

Part # Size Bar Type MSRP

A24 1”A285 A286

10.00 (pair)

A59 1.25”A285 A286

14.00 (pair)

A94 1”A270 A287 A613

10.00 (pair)

eyehook

Ì Eyehooks includes sliders to fasten into channel.

Ì Tighten eyehook to secure into place.

Part # Height Bar Type MSRP

A25 1.5” A285, A286

20.00 (pair)

A26 1.5” A270, A287, A613

20.00(pair)

AdjustAble eyehook Ì Eyehooks includes sliders to secure

into channel.

Ì Tighten knob to secure into place.

Part # Length Install Weight Capacity MSRP

A62 10’ Onto Eyehook 150 lbs 35.00 (each)

rAtchet tie-down

Ì The Vantech Ratchet tie-down attaches to eyehooks on the mounting uprights with 1/2” bolts.

Ì Sold as individuals

Part #Strap

LengthBar Type Weight Capacity MSRP

A61 7’ Channels 150 lbs 29.00 (each)

rAtchet tie-down

Ì Attach the Vantech Ratchet tie-down to the channels of the crossbar.

Ì Sold as individuals

Ì Adjustable along channels

Part # Bar Type MSRP

A47 Locking Key knob with key (sold in pairs) 39.00 (pair)

lockinG key knob

Ì Prevent theft of racks or equipment

Ì Fits all 3/8” threading on upright mounts

7

Vantech 6” conduit carrier. Ì Spring assist rear door for a water tight seal.

Ì Padlock tab for rear hatch door.

Ì Direct bolt-on system.

Ì Secures into channels of aluminum crossbars with sliders.

Ì Includes: Front cap, rear door, 2 “U” brackets and hardware.

Ì 6” PVC pipe not included.

Part # Description Bar Type MSRP

A34 6” Conduit Carrier (bolt on) All 89.00

Plastic Bar Guard

Ì 3/4" & 2" Plastic Bar Guards

Ì Adhesive on one side

Ì Extend life of crossbars.

Ì Prevents scratches on Cross Bars

Ì Can be cut to specific sizes

Ì Any excess can be cut to length

Ì Can be used on other surfaces

Part # Description Length MSRP

BG042 3/4” wide bar guards with self adhesive tape 42” 6.00






BG251 2” wide bar guards with self adhesive tape 51” 9.00





BG5483/4” wide non-slip rubber bar guards

(press in channels)48" 14.00










BG7481” wide rubber Cushion bar guards










Surfaces without Channel

Surfaces with Channel

Surfaces with Channel

ruBBer Bar Guard

Ì Rubber Bar Guards

Ì Fits into channels of extruded aluminum bars

Ì Easy press-on design

Ì Can be cut to specific sizes

Ì Any excess can be cut to length

Ì minimize rattling sound

Ì Prevents scratches on Cross Bars

ruBBer Bar Guard cushion

Ì Rubber Bar Guards (Cushioned)

Ì Fits into channels of extruded aluminum cross bars.

Ì Function and install similar to normal rubber bar guard

Ì Additional air pocked for extra cushion

Ì Great for kayaks, boards, and other materials or equipment.

Part # Size Color MSRP

A108 3.75" Black 5.00

360°adjustaBle conVex Mirror (Adhesive bAck)

Ì Sticks onto side view mirror.

Ì Adhesive backing

Ì Convex Mirror to show more

Documents

Required Tools INSTRUCTION MANUAL J1035 J2035 … N005 X4 W008 Z285 (Only for J1000) ... Short Tall 1.75 ... 3/4” wide non-slip rubber bar guards aluminum bars (press in channels)