-
Replus DirectON CM122448-60-VMPPT Solar Charge Controller
Intelligent Maximum Power Point Tracking technology increases
efficiency by up to 25%~30%Compatible with 12V, 24V and 48V
systemsThree-stage charging optimizes battery performanceMaximum
charging current up to 60AMaximum efficiency up to 98%Battery
temperature sensor (BTS) automatically provides temperature
compensationSupports a wide range of lead acid batteries, including
Vented, AGM and Gel batteriesMultifunction LCD displays detailed
information
www.renesola.comin NYSEFollow us
Features
INTRODUCTIONReplus DirectON CM122428-60-V is an advanced solar
charger with maximum power point tracking. By applying an
intelligent MPPT algorithm, this solar charge controller will
continuously track the maximum power point of the solar array,
thereby extracting the maximum available solar power at all
times.
-
Replus DirectON CM122448-60-V
Battery Nominal Voltage 12 V 24 V12 V 48 VElectrical
Specifications - Solar Array InputMaximum Input Power 800 W 1600 W
3200 W
Maximum Input Current
Maximum Input Voltage
PV Array MPPT Voltage Range
Electrical Specifications - MPPT OutputMaximum Output Power 800
W 1600 W 3200 W
Maximum Output Current
Battery Charging Battery Types Supported
Charging Curv e
Charging Stages
EqualisationTemperature Compensation
Temperature Compensation Range
Temperature Compensation Set Points
Battery Sense Terminals
Remote Temperature Sensor
Voltage Regulation Range 9 ~ 15 Vdc 17 ~ 30 Vdc 34 ~ 58 Vdc
EfficiencyPower Conversion
ProtectionTransient Surge Protection
Input
Output
Temperature
Common Polarity
General DataDimensions (W x H x D)
Weight
Mounting
Operating Temperature
Relative Humidity
IP Rating
Cooling
Display
Communication
Communication (Optional)
Dry Contact
Standard Warranty
315 x 165 x 128 mm
4.5 kg
Wall Mount
0~55°C
5~90% (Non condensing)
IP31
Natural
LCD Display
RS-232
USB, Modbus and SNMP
No
2 Years
-5mV / °C / cell (25 °C ref .)
0 ~ 50°C
98%
Available
High Temperature
4500 W / port
60 A @ 80°C
145 Voc
Absorbtion, Float
50 A
Programmable
3 Stage
60 ~ 115 Vdc
Lead-acid (Vented, AGM, GEL)
Bulk, Absorption, Float
Included
High voltage
High voltage
Negativ e
Technical Data Replus DirectON CM122448-60-V
For More Information, Please Contact:
Email: [email protected]
-
High efficiency series PWM charging increases the battery life
and improves the performance of the solar systemUse MOSFET as
electronic switch, without any mechanical switch LED indicators
provide indication of battery voltageThe USB provides 5Vdc for the
charging of small electronic equipmentTemperature compensation
automatically corrects charging and discharging parameters and
improves battery lifeElectronic protection is provided against
over-charging and discharging, overload and short circuitReverse
battery polarity protection
www.renesola.comin NYSEFollow us
Features
INTRODUCTIONThe Replus DirectON P2 PWM series type charge
controllers are economical, advanced digital technology controllers
that operates fully automatically. The 10A and 20A controllers
automatically recognises 12 or 24V battery systems and adjusts the
charge profile accordingly. Pulse Width Modulation (PWM) battery
charging will greatly increase battery life. It has various unique
functions which are easy to use.
Replus DirectON CP12-05-P2 / CP1224-10-P2 / CP1224-20-P2
-
Technical Data Replus DirectON CP12-05-P2
Replus DirectON CP12-05-P2
Replus DirectON CP1224-10-P2 Replus DirectON CP1224-20-P2
Replus DirectON CP1224-10-P2 Replus DirectON CP1224-20-P2
Nominal System Voltage 12VDC 12/24VDC 12/24VDC
Rated Battery Current 5A 10A 20A
Maximum PV input voltage 16V 32V 32V
Self-consumption
Charge Circuit Voltage Drop
Discharge Circuit Voltage Drop
Temp. Compensation
Equalize Charging Voltage
Boost Charging Voltage
Float Charging Voltage
Low Voltage Reconnect Voltage
Low Voltage Disconnect Voltage
USB output
Overall Dimension 109.7x65.5x20.8mm 120.3x67x21.8mm
148x85.6x34.8mm
Mounting Hole Size Φ4.5mm Φ4.5mm Φ4.5mm
Terminal 2.5mm² 4mm² 6mm²
Net weight 95g 102g 179.6g
Working temp.
Storage temp.
Humidity
Enclosure IP20
Gel / Sealed / Flooded:12.6V
Gel / Sealed / Flooded:11.1V
5VDC/1.2A
-35°C ~ +55°C
-35°C～+80°C
≤ 95% N.C.
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V
Gel / Sealed / Flooded:13.8V
≤ 6mA
≤ 0.26V
≤ 0.15V
-5mV/°C /2V (ref)
Gel: ----, Sealed: 14.6V, Flooded: 14.8V
For More Information, Please Contact:
Email: [email protected]
-
12V/24V Auto recognitionHigh efficiency PWM charging with
temperature compensationRS-485 or RS-232 bus communicationOpen
standard Modbus communication protocolField software update by
connecting to PCElectronic protection against overheating,
over-charge, over-discharge, overload and short circuitsReverse
polarity protectionReal-time energy statistics is
recordedTemperature compensation improves battery lifeAdvanced
battery SOC calculationUser defined options available for Vented,
AGM or GEL batteries
www.renesola.comin NYSEFollow us
Features
INTRODUCTIONThe Replus DirectON P1 PWM series type charge
controller is an advanced digital technology controller that
operates fully automatically. The controller automatically
recognises 12 or 24V battery systems and adjusts the charge profile
accordingly. Pulse Width Modulation (PWM) battery charging will
greatly increase battery life. If has various unique functions and
they are easy to use. The optional MT50 remote monitor allows for
visual display of all electrical parameters.
Replus DirectON CP1224-30-P1
-
Technical Data Replus DirectON CP1224-30-P1
Replus DirectON CP1224-30-P1
* Battery technical data is for a 12V system at 25°C. Multiply
by 2 for 24V systems
Nominal System Voltage 12/24VDC
Rated Battery Current 30A
Maximum PV input voltage 50V
Grounding Common Positive
Discharge Circuit Voltage Drop ≤ 0.20V
Self-consumption ≤ 8.4mA/12V; ≤ 7. 8mA/24V
Temp. Compensation -3mV/°C/2V（25°C ref）
Equalize Charging Voltage Sealed: 14.6V, Flooded: 14.8V,
User-defined: 9~17V
Boost Charging Voltage Gel: 14.2V, Sealed: 14.6V, Flooded:
14.8V, User-defined: 9~17V
Float Charging Voltage Gel /Sealed /Flooded: 13.8V,
User-defined: 9~17V
Low Voltage Reconnect Voltage Gel /Sealed /Flooded: 12.6V,
User-defined: 9~17V
Low Voltage Disconnect Voltage Gel /Sealed /Flooded: 11.1V,
User-defined: 9~17V
Dimension 200.6x101.3x57mm
Mounting holes 190x70mm
Terminal 10mm2
Net weight 0.5kg
Working temp. -35°C ~+55 °C
Storage temp. -35°C ~+80 °C
Humidity ≤ 95% (NC)
Enclosure IP30
For More Information, Please Contact:
Email: [email protected]
Replus DirectON CM122448-60-V low resReplus DirectON CP12-05-P2
& CP1224-10-P2 & CP1224-20-P2 low resReplus DirectON
CP1224-30-P1 low res.pdf
