You will need:

General workshop tools

Sponge

Glue provided

REPLACEMENT SEAT

COVER KIT (TD5

ONLY) ILLUSTRATED FITTING MANUAL

2

Thank you for purchasing the Replacement Seat Cover Kit. Please read these

instructions carefully before commencing work.

You can fit Masai Seat Covers to your Defender in just a few hours.

Before commencing, remove the old seat covers carefully without damaging the

foam material from the seats. Do not remove headrest covers! Try the new

seat covers on to your seats to ensure that you are happy with the shape and

fit. Turn the seat covers inside out and prepare to begin fitting.

REPLACEMENT SEAT

COVER KIT

Your kit includes:

Appropriate seat covers

Adhesive

3

1. Apply the glue at the whole length of the

existing green strips on the back of the seat

covers.

2. Leave to dry, at least 80% dry when the

glue will not stick to your hand when

touched.

5. Wrap the seat cover onto the car seat.

Press on to the glue applied area to ensure a

firm bonding and the shape would be formed

nicely.

6. Repeat the steps on the lower car seat

portion and headrest. Note that it is not nec-

essary to remove the existing cover from the

headrest before applying your new one.

3. Apply the glue on the foam of the seat

area, which is to be attached to the green

strips on the seat covers. Leave to dry as per

the seat cover portion.

4. When glue on both surfaces does not feel

sticky, carefully line both portions together as

accurately as possible and attach. The adhe-

sion should now be firm by now.

Customer Feedback

Your feedback is very important to us.

We would love to hear any suggestions or recommendations you may

have about the Masai product range. If you have any feedback you think

may help us improve the services or products we offer, then please use

the details found at the bottom of this page to contact us.

Thank you for choosing Masai.