'·- _ .. �

Solar8 Turbines RETROFIT KIT DRAWING A Caterpillar Company CATERPILLAR: CONFIDENTIAL GREEN

Replacement Backup Overspeed Monitor Kit Installation Instruction

PRODUCT : ALL

MODEL: ALL

PURPOSE

This instruction provides guidelines for installing, wiring, and checking a digital backup overspeed monitor replacement forthe obsolete analog types typically described by Solar part number series 172809-xxx.

SCOPE

Select appropriate schematic scheme to re-wire replacement backup overspeed monitor per schematic.

Remove existing connector plug and rewire the replacement backup overspeed monitor. Install relay(s) if required per schematic.

Check for functionality, operation and verify calibrated setpoints.

REFERENCE

This Retrofit Kit Drawing is associated with Retrofit Kit 1071653- (See table A)

This Retrofit Kit Drawing is associated with Service Bulletin 5.1 /138

This Retrofit Kit Drawing CANCELS AND SUPERCEDES 1054415-xxx

PROJECT DATE DCL RELEASE DRAWING NO. Colin Hemminq 12-23-05 Change Request CSAE LEAD

2 ® 1071653 Jim Bowers 12-23-05 13141 DESIGN REV. SHEET

Ed Tanabe 12-03-05 CODE

�

�

66195 DRAFT IDENT. A 1 OF 41 G. Leslie & E. Tanabe 12-08-05

This copyrighted work and the information herein is proprietary to Caterpillar Inc., Solar Turbines Incorporated, and/or subsidiaries of either. Without express, written proprietor permission, any copying, disclosure, or use except that for which it is loaned, is prohibited.