Renault Store - Technical specifications Initiale Paris

Renault Store - Technical specifications

Initiale Paris display cabinet

© Renault Brand Stores - July 2015

2


Renault Store / Technical specifications for the Initiale Paris display cabinet / Contents

Contents

General

Introduction 4

Colours & materials 5

Layout principles 6

Technical principles

General presentation 8

General description 9

Detailed dimensions 12

Manufacturing details 17

Price display 18

Merchandising 20

General

4


Renault Store / Technical specifications for the Initiale Paris display cabinet / General

Introduction

In the Initiale Paris zone, this recto-verso display cabinet unit presents merchandising from the Ini-tiale Paris range exclusively.

The items mainly consist of fashion accessories and leather goods: handbags, cases, wallets, lap-top bags, etc.

5



RAL 9003 satin white

- White melamine veneer EGGER W1000 ST9 premium white on particle board panel

- 1 mm white PVC edges

Dark grey equivalent to RAL 7024

- Dark grey melamine finish in EGGER U963 ST15 diamond grey affixed to particle board

- Dark grey PVC edges- Lacquered steel

Clear Crystal Securit Safety Glass*

- Shelf, thk. 6 mm- Casing, thk. 8 mm- Central and side vertical

uprights, thk. 6 mm- Glass door, thk. 8 mm

Fittings

- Micro-blasted or matt chrome finish

* Glass in standard quality and not ultra white.

Colours & materials

6

Carreaux 600 x 600 mm

18 carreaux 12 carreaux

10 c

arre

aux

7 carreaux

24 carreaux 16 carreaux

13 c

arre

aux

9 carreaux



Layout principles

PrincipleThe «Initiale Paris» thematic zone allows for the display of 1, 2 or 3 vehicles.

Display cabinet installationThe Initiale Paris display window should be installed opposite the 2 x 2 m POS advertising display, itself facing the main flow.

NOTE:The Initiale Paris thematic zone is covered by its own tech-nical specification

Technical principles

8


Renault Store / Technical specifications for the Initiale Paris display cabinet / Technical principles

General presentation

DescriptionThe unit consists of a recto-verso display cabinet unit fitted with shelves.A double glass door provides access to the display items.It is secured by locks at the bottom.The rear part consists of an integral glass casing resting on glass support fittings.Large-size merchandising products are presented on bracket supports.A price/characteristics card is displayed next to each product, mentioning the name and reference of the products and any other mandatory details.

The arrangement opposite is shown by way of example.

9

1100

1960

86421 1095 73 3



General description

Front1 Flat edges and surface

Lightweight board panels, 60 mm thick, 90° cuts White melamine finish in EGGER W1000 ST9 Premium white. 1 mm PVC edges

2 Frame Particle board panels with dark grey melamine finish in EGGER U963 ST15 diamond grey 1 mm PVC edges

3 Side vertical uprights in Securit safety glass, thk. 6 mm

4 Securit safety glass shelf, thk. 8 mm UV bonded to central and side uprights

5 Securit safety glass door, thk. 8 mm Hinges fixed to the lateral wood panel

6 Chrome finish locks7 Shelves and vertical uprights in Securit safety glass,

thk. 6 mm8 Wooden doors, thk. 20 mm

Particle board panels, dark grey melamine finish in EGGER U963 ST15 diamond grey 1 mm white PVC edges, chrome locking mechanism

9 Plinth inset by 20 mm. Water-repellent particle board panel with PVC edges RAL 7024 dark grey finish

10 Rubber pad, thk. 5 mm. dia. 40 mm

10

1100

600

900

1960

60 20 20 60600

900

600

6 85421 973 3



General description

Back1 Flat edges and surface

Lightweight board panels, thick, 90° cuts Veneered with white melamine in EGGER W1000 ST9 Premium white. 1mm PVC edges

2 Frame. Particle board panels. Dark grey melamine finish in EGGER U963 ST15 diamond grey. 1 mm PVC edges

3 Side vertical uprights in Securit safety glass, thk. 6 mm

4 Securit safety glass shelf, thk. 8 mm Supported by plastic-protected chrome dowels Adjustment by shifting dowels by increments in the order of 50 mm

5 Securit safety glass case, thk. 8 mm Fastenings fixed to the lateral wood panel. UV bonded to central uprights and shelf

6 Particle board panel, thk. 20 mm Dark grey melamine finish in EGGER U963 ST15 diamond grey. 1 mm PVC edge

7 Plinth inset by 20 mm Water-repellent particle board panel with PVC edges Finish same as for attachment plate, RAL 7024 dark grey.

8 Chrome finish locks

9 Rubber pad, thk. 5 mm. dia. 40 mm

11

5 6 7 11984 14321 1310 12



General description

Schematic exploded view1 Side vertical uprights in Securit safety glass, thk. 6 mm2 Securit safety glass front door, thk. 8 mm

Lock at the base of the cabinet. Stop on the upper section. Translucent pads

3 Hinges fixed to the lateral wood panel (4)4 Plinth inset by 20 mm

Water-repellent particle board panel with PVC edges, RAL 7024 dark grey satin finish

5 Rubber pads, thk. 5 mm6 Chrome finish locks7 Central vertical upright in Securit safety glass,

thk. 6 mm8 Safety glass shelf, thk. 6 mm9 Shelf support dowels

10 Case attachment11 Securit safety glass rear window casing, thk. 8 mm12 Securit safety glass top, thk. 8 mm13 Dark grey melamine finish panels in EGGER U963

ST15 diamond grey14 Frame

Lightweight particle board panel White melamine finish in EGGER W1000 ST9 white Premium ST9. 1 mm white PVC edges

12

602060 600

1800

1960

360

20 600400 600

20 1920 2020 20360

1100

1075

717

298

6025 20

6027

820

358

358

20

20

AA

Side and font view



Detailed dimensions

13

1960

400

400

360

2020

1100

1075

20

360 2020

COUPE AA

COUPE CC

COUPE BB

CC

BB

Découpe du montant en verre au contour des charnières

Patins caoutchouc

Overhead view and cross-section



Detailed dimensions

Cut-out in glass upright to contour of hinges

AA CUT

Rubber pads

CC CUT

14

8

97

17

896

débouchant

30

1 3,5

20

15

301 2, 5

Chants plats polis

d.11 débouchant

519

713

97



Manufacturing details

Fastening of glass doorThe glass doors shall be fixed at two points to provide good support and satisfactory rigidity for manipulation.

Under all circumstances, given the weight of the glass door, the fastenings used will require drilling of the glass panel to ensure that the fastenings are properly held in place and to avoid any risk of loss of alignment.

Clamp fastenings are to be avoided.

Flat polished edges

d.11 hole

d.11 hole

15

262 3535 262 3535

332 332

MONTANT CENTRAL MONTANT LATÉRAL

1 32




Vertical glass uprightsThe vertical uprights contribute to the rigidity of the glazed assembly.

The top and the rear casing are bonded to the vertical uprights.

They are drilled through at 50 mm intervals to offer a wide range of adjustment for shelves.

The shelves are fixed in place with dowels of transparent polycarbonate or chrome-plated steel protected by silicon ends, to ensure the stability of the shelves.

The lateral uprights feature cut-outs correspon-ding to the imprint of the door hinges and the attachment fittings for the rear casing.

Key1 Standard Securit safety glass, thk. 6 mm2 Drill holes for attachment of shelves3 Cut-outs for hinges and attachment fittings

CENTRAL UPRIGHT LATERAL UPRIGHT

16

228

10

178

2,5

528

178

128

Soudure TIG

Soudure TIG

102,

5

12

90°

75

2

6

5

42 31




Arm for display of productsLarge bags are presented hung onto adjustable bracket arms mounted on attachment plates.

Key1 Adjuster, dia. 5 mm,

brushed stainless steel finish2 Stainless steel attachment plate,

thk. 2.5 mm Brushed finish

3 Stainless steel arm, thk. 2.5 mm Brushed finish Welded to inner tube

4 Rubber pads5 Sliding inner tube

10 x 10 x 1.5 mm, stainless steel Brushed finish

6 Arm stand tube 12 x 12 x 1.5 mm, stainless steel Brushed finish

TIG Welding

TIG Welding

17

1

5

2 3

4




Fittings and finishThe fittings must be discreet with a matching finish (preferably matt chrome).

Key1 Rectangular hinge, matt chrome finish2 Rectangular lock, matt chrome finish3 Shelf fastening lug, matt chrome finish or

transparent plastic trim

To be avoided:4 Glass fastening clips that are too large5 Round lock

18

1,5

10

60°

45

5

VUE DE FACE

VUE DE DESSUS

3

8

70

VUE DE CÔTÉ



Price display

SupportThe price display consists of a support fabricated using an extruded crystal PMMA plate, 8 mm thick.

The top side is grooved to allow a printed card to be inserted.

The surfaces have a polished gloss finish.

OVERHEAD VIEW

SIDE VIEWFRONT VIEW

19

70

80

VERSO RECTO

TRACÉS

9

4,5

Etalement maxi 56 mm8 6

3,6

3,62,5

3,6

9,4

9,4

32,4

6,22,4

2,5

HELVETICA NEUE CONDENSED

HELVETICA NEUE CONDENSED BOLD

A

B

C

3

4

2

1



Price display

LabelThe size of the labels is: H. 80 x W. 70 mm.

They are printed on both sides on a rigid matt white card support (min. thickness 350 g/m2).

KeyA Name of collectionB Name of itemC References, prices and mandatory information

1 Pantone grey 426 C background Decor in reverse white

2 White background3 Typography

Renault Life Bold Pantone grey 426 C Left-aligned

4 Typography Renault Life Pantone grey 426 C Left-aligned

20

1 2 343

5 6 7 8



Merchandising

Initiale Paris Premium range1 Laptop bag2 Large bag3 Handbag4 Weekend bag5 Badge/card case6 Key case7 Wallet8 Miniature

NOTE:References available from DCPA.

Documents

Renault Store - Technical specifications Initiale Paris