Embed Size (px)
Citation preview
Forced Convection Laboratory Incubators
www.escoglobal.com
Forced Convection Laboratory Incubators
Reliable PeRfoRmance foR UniveRsal aPPlications
Forced Convection Laboratory Incubators
Forced Convection Laboratory Incubators
intRodUction
Introducing Esco Isotherm® - world class laboratory incubators from Esco with the technologies and compliance to prove it. Ergonomic, intuitive interfaces, microprocessor PID controls with programming options, 4 zone heated air jacket, precisely tuned and tested ventilation and insulation package, all supported by Esco’s solutions - based sales and service representatives worldwide.
Isotherm® Forced Convection Laboratory Incubators available in 5 sizes,
32L, 54L, 110L, 170L, 240L.
• Innovativedesignguaranteesmaximumthermalperformance.
• Noexposedheatingelementslocatedinsidethechambertoensure maximumusersafety.
• 4zoneheatedairjacketensuresstableheatingandmaximumtemperature uniformity in the chamber.
• Standardtemprangeupto100°Cformaximumapplicationflexibility.
• Secure2pointdoorsealandeccentrichingeensuremaximumgasket compression for stable chamber temperature.
solaRistm PRe-Heat cHambeR tecHnology
Isotherm® Forced convectIon Laboratory
Incubators
Reliable Performance For Universal Applications
Key featURes
ExtremelyUniformThermalDistribution
Pre-heated air enters work
chamber
Pre-heat zone below work chamber
Air supply from outside
Secure2pointdoor seal
Gasket of outer door - for thermal decoupling
Door handle
2
Forced Convection Laboratory Incubators
Forced Convection
Laboratory Incubator
- Forced convection design produces faster temperature response rates, improveduniformity,andreducedfluctuation.
- German made ebm-papst fan, permanently lubricated, maintenance free for uniform air circulation.
- Low energy consumption for reduced operating costs.
- Fanspeedandairexchangeratesareadjustable.
- Consistent air circulation and heat uniformity.
- Low noise during operation.
- Fresh air entry from the base of the chamber, combined with the rounded cornersofthechamberinterior,andairexhaustattherearofthechamber, createsuniformaircirculationensuringmaximumtemperatureuniformity.
- Chamber fan inlet pulls air away from the user, preventing the user from beingexposedtoblastsofhotairwhenthedoorisopened.
- Electrogalvanized steel with white oven-baked epoxy-polyesterantimicrobialpowder-coated finish.
- ExternalsurfacesarepowdercoatedwithEsco to eliminate 99.9% of surface bacteriawithin24hoursofexposure.
ventiflow™ ventilation system
QUality esco constRUction
- Multilayerchamber,pre-heatchamber,insulationandexternalcarcass.
- Improveschambertemperaturestability,whilereducingexternalsurface temperatures.
- Superiorinsulationperformancereducesheatloadoutputtothelaboratory, reduces operating power consumption, and lowers operating costs.
sUPeRioR insUlation
Isotherm® Forced Convection Laboratory Incubator
3
Forced Convection Laboratory Incubators
airflow adjusterOpens/ closes rear exhaust vent to adjust airflow for varying applications.
“actual” and “set Point” displaysShow actual temperature and temperature set point at the same time.
led indicatorsIndicate condition of equipment during heating.
main Power switchConveniently accessible.function Keys
For temperature, alarm, program and other settings.
independent adjustable over-temperature thermostatProtects the equipment against overheating.
- Ergonomic door handle, operation is gravity assisted.
- Bright LED displays mounted at top (not base) of the device are easily read from across the laboratory.
- 2 shelves are included for 32L, 54L, 110L, 170L and 240L models.
Access port.
Back View
eRgonomic design imPRoves convenience
access foR temPeRatURe validation and maPPing
• Instrument-gradeprecisionplatinumtemperatureprobe.
• TunedPIDcontrolensuresfastramptime,preventsovershoot,andensures stable temperature once setpoint is achieved.
• Twintemperaturedisplaysforeasymonitoring.
• Built-inmenuisintuitive,easytooperate;leftdisplayshowsparameterbeing set, and right display shows preset value.
• Userprogrammablealarmsetpoints.
• Displayunitsselectablebetween°C/°F.
• UserprogrammablePINtopreventunauthorizeduse.
• Anywherefrom10programswith5segmentsto1programwith50 segments may be configured. Programs may be set up to repeat automatically.
• Audibleconfirmationofallsettings.
• Diagnosticfunctionsprovideaccesstochamberhistoricaltemperaturesand sensor read-outs to simplify service.
• DiagnosticLEDsonelectronicsPCBsimplifyservice.
smaRtsense™ micRoPRocessoR Pid contRol tecHnology
wide Range of PRogRam oPtions
100
80
60
40
20
00 20 40 60 80 100 120 Time (min)
Set Temp = 90 oc
Conventional Control
Fromambient
temp
temp (oc)
temp (oc)
SmartSense PID
sample Program 2Running different processes sequentially based on user’s setting of ‘start temp’, ‘arrival temp’, and running time after arrival. Different programsmaybelinkedtoextendthetotalnumber of sequences, thus creating virtually unlimited programming options.
sample Program 1Repeats of identical processes based on user’s setting of ‘start temp’, ‘arrival temp’, and running time after arrival. All settings can be done in a single program. For example,repeataprocessfrom50°Cto70°Candback.0
20
40
60
80
100
Co
0
20
40
60
80
100
Co
4
Forced Convection Laboratory Incubators
- Multiple redundant over-temperature protection systems to guarantee maximumsampleanduserprotection.
- Electronic over-temperature protection built into the microprocessor.
- Redundant mechanical over-temperature protection, adjustable from the front, independent from the microprocessor.
- OveralltemperatureprotectionmeetsDIN12880Class3.1.
- RedLEDilluminatesifexternalmechanicaltemperatureprotectionisengaged.
- Controller will control temperature at the over temperature setpoint.
- AllelectricalcomponentsULrecognized.
- ElectricalcircuitprotectioninaccordancewithULrequirements.
access foR temPeRatURe validation and maPPing
safe, sUPeRioR PRotection foR samPle, UseR and tHe enviRonment
oPtional stainless steel exteRioR foRced convection laboRatoRy incUbatoRs aPPlications
secURity featURes to PRotect samPles
Door keylock prevents unauthorized access to sensitive samples.
Door latch and inner door seal toprovideexcellenttemperatureuniformity and accuracy.
Ergonomic door handle, operation is gravity assisted.
5
aPPlication mateRial/ samPle
Bacterial research Bacteria
Microbiology Microorganisms, cells
Coliform determination Bacteria
Histology Tissue
Paraffin embedding Paraffin
Egg incubation Eggs
Heated storage Media, samples
Gene cloning Bacteria, cells
Pharmaceutical stability Various
Food and beverage testing Various
BOD / water pollution Water
Yeast growth Yeast
Hatching of insects, fish Insects
TheRS485providesserialcommunicationportforPC.It can be daisy chained from product to product and connected to PC.
Rs485 commUnication PoRt
- Corrosion resistant surface.
- Robust construction.
- Meets pharmaceutical & clinical laboratory requirements.
Forced Convection Laboratory Incubators
Wall Mount Bracket
maximized sPace efficiency
SupportStand
• “Cleanroom”designwithminimaljointsandcrevicesiseasytoclean.
• Singlepiecestainlesssteelchamberwithroundedcorners.
• Glassdoorisdismountablewithouttoolsforeasycleaning.
easy-to-clean
- Diagnostic functions in the microprocessor include historical read-out of temperatures.
- Diagnostic menu provides read-out of all sensor inputs and controller settings.
- Servicecanbecarriedoutfromthefront.
- All electronics components are isolated from the work chamber and easily accessible for replacement.
- Low service costs.
easy-to-seRvice
wall mount bracket: Available only for 32L, 54L chambers
support stand: Supportstands,fixedheight, available703mm(27.7”)
oPtions and accessoRiesFORCEDCONvECTIONLABORATORyINCUBATORS
- Wall bracket (only for 32L, 54L chambers) accommodates desired operating heights.
- Supportstands,fixedheight,available703mm(27.7”).
- Reversed door swing. (factory installed)
- Additional shelf.
- Esco Voyager software for the remote monitoring, datalogging, and programming/deviceconfigurationofEscocontrolledenvironmentlaboratory equipment.
- Optional stainless steel cabinet.
6
Forced Convection Laboratory Incubators
Volume 32 liter (1.13 cu.ft) 54 liter (1.91 cu.ft) 110liter(3.88cu.ft) 170 liter (6.00 cu.ft) 240liter(8.48cu.ft)
Temperature Range Ambient+7.5°Cto100°C
Temperature Variation Per DIN
12880 Spatial Uniformity
at37°C <=+/-0.50C <=+/-0.40C <=+/-0.40C <=+/-0.30C <=+/-0.60C
at50°C <=+/-0.60C <=+/-0.70C <=+/-0.70C <=+/-0.50C <=+/-0.60C
Temperature Fluctuation Per
DIN 12880 Control Fluctuation
at37°C <=+/-0.30C <=+/-0.30C <=+/-0.30C <=+/-0.20C <=+/-0.20C
at50°C <=+/-0.30C <=+/-0.30C <=+/-0.30C <=+/-0.30C <=+/-0.30C
Heating up timeat37°C 29 minutes 34 minutes 40 minutes 44 minutes 50 minutes
at50°C 36 minutes 50 minutes 68minutes 45 minutes 74 minutes
Recovery time after door
opened for 30 sec
at37°C 6 minutes 4 minutes 8minutes 1 minutes 4 minutes
at50°C 8minutes 10 minutes 13 minutes 2 minutes 5 minutes
Electrical data
(220-240V, AC, 50/60Hz,1Ф)
Power consumption at37°C
43 W 49 W 58W 51 W 67 W
Power consumption at50°C
77 W 83W 98W 110 W 115 W
MaximumPowerConsumption**
779W 919W 1097W 1248W 1255W
Noise level 49 dB 48dB 49 dB 51 dB 51 dB
Incubator Construction
Main Body Electrogalvanizedsteelwithwhiteoven-bakedepoxy-polyesterpowder-coatedfinish
Chamber Stainlesssteel,grade304
Number of Shelves
Standard 2 2 2 2 2
Maximum 4 5 6 7 9
Maximum Load Per Shelf 15 kg (33 lbs) 15 kg (33 lbs) 30 kg (66 lbs) 30 kg (66 lbs) 30 kg (66 lbs)
External Dimensions (W x D x H)550x437x615mm 21.7"x17.2"x24.2"
550x527x695mm 21.7”x20.7”x27.4”
710x587x785mm 28”x23.1”x30.9”
740x800x910mm 29.1”x31.5”x35.8”
800x827x1030mm 31.5”x32.6”x40.6”
Internal Dimensions (W x D x H)400x250x320mm 15.7"x9.8"x12.6"
400x340x400mm 15.7"x13.4"x15.7"
560x400x490mm 22”x15.7”x19.3”
580x500x580mm 22.8”x19.7”x22.8”
645x527x700mm 25.4”x20.8”x27.6”
Net Weight 45 kg (99 lbs) 55 kg (121 lbs) 79 kg (174 lbs) 118kg(260lbs) 144kg(318lbs)
Shipping Weight 57 kg (126 lbs) 69 kg (152 lbs) 98kg(216lbs) 140 kg (309 lbs) 166 kg (366 lbs)
Shipping Dimensions, Maximum (W x D x H)
620x530x840mm24.4”x20.9”x33.1”
630x620x920mm24.8”x24.4”x36.2”
780x680x1020mm30.7”x26.8”x40.2”
900x900x1100mm35.4”x35.4”x43.3”
900x900x1200mm35.4”x35.4”x47.2”
Shipping Volume, Maximum 0.37 m3 (13.1 cu.ft) 0.49 m3 (17.3 cu.ft) 0.61 m3 (21.5 cu.ft) 0.89m3 (31.4 cu.ft) 0.97 m3 (34.3 cu.ft)
geneRal sPecifications
NOTE:•Alltechnicalspecificationsarespecifiedforunitswithstandardequipmentatanambienttemperatureof25°Candavoltagefluctuationof±10%.•ThetemperaturedataaredeterminedinaccordancetoDIN2880standardsasperfactorytypetestcondition.•Escoreservestherighttoaltertechnicalspecificationsatalltimes.
*Stainlesssteelexterioroptionisavaiableforallsizes.**Inordertocalculatethecurrentatmaximumpowerconsumption,dividemaximumpowerconsumptionbythevoltage.
ifa-32-8 /ifa-32-8-ss*
ifa-110-8 / ifa-110-8-ss*
ifa-54-8 / ifa-54-8-ss*
ifa-170-8 / ifa-170-8-ss*
ifa-240-8 /ifa-240-8-ss*
FORCEDCONvECTIONLABORATORyINCUBATORS
standards compliance
temperature safety electrical safety
DIN12880Class3.1UL61010-1,USA;CAN/CSA-22.2,No.61010-1;EN61010-1,Europe;IEC61010-1,
Worldwide
7
Forced Convection Laboratory Incubators
PTEscoBintanIndonesiaCert.No:651333/E
Esco Micro Pte Ltd Cert.No:651076
LIVE SUPPORTescoglobal.com
BiologicalSafetyCabinets
CO2 Incubator
Compounding Pharmacy Equipment
Containment/PharmaProducts
DuctlessFumeHoods
IVF Workstations
Lab Animal Research Products
LaboratoryFumeHoods
Laboratory Incubators
Laboratory Ovens
Laminar Flow Cabinets
MicroplateShaker/Incubator
PCR Cabinets
PCRThermalCyclers
Powder Weighing Balance Enclosures
Ultra-lowTemperatureFreezers
Beijing, China
Guangzhou, China
Shanghai,China
Hanoi,vietnam
Melaka, MalaysiaSingapore
Seoul,Korea
KualaLumpur,Malaysia
Mumbai, India
Delhi, IndiaManama, Bahrain
Salisbury,UK
WORLDCLASS.WORLDWIDE.
9010054_Lab Incubators_IFA_Icebreaker_A4_vC1_03/12 Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right to alter its products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the respective companies.
Manila, Philippines
Osaka, JapanPhiladelphia,PA,USA
esco technologies, inc. 2940TurnpikeDrive,Units15-16•Hatboro,PA19040USA
Toll-FreeUSAandCanada877-479-3726
Tel2154419661•Fax2154419660
us.escoglobal.com•[email protected]
esco micro Pte. ltd. 21ChangiSouthStreet1•Singapore486777
Tel+6565420833•Fax+6565426920
[email protected]•www.escoglobal.com
Jakarta, Indonesia
Midrand,SouthAfrica
