ReleaseNotePRO v378 Win

7/30/2019 ReleaseNotePRO v378 Win

1/3

Release notes for Capture One PRO 3.7.8 for Windows

January 2008

Whats new in Capture One PRO 3.7.8

New camera support

Canon 1D Mark III, 1Ds Mark III, 40D, G9

Nikon D3, D40X, D300

Olympus E-3, E-410, E-510

The software license agreement has been updated.

Solved issues

Improved dual output calibration for P series digital backs

Enhanced pattern noise suppression

Fixed Live Preview column mapping errors for Phase One digital backs

Lens Cast Calibration improvements for preview for Phase One digital backs

Known issues

Tethered capture with a number of Canon EOS cameras is not supported

Processing to scale factors at 120-170% may present artifacts in sub pixel details

Occasional a green line through part of the image can be seen in Olympus E-500 images. Appears in thepreview and in the developed image

Using arbitrary rotation can make the preview unsharp for some images. The developed images are notaffected by this issue.

Phase One digital backs may fail to connect properly when using Phase One repeater on a laptop withbuilt-in 4-pin FireWire.

Some meta data fields are not applied correctly when outputting to jpeg format Processed images from Phase One digital backs P 21, P 30 and P 45 images, which have been rotated

arbitrarily show black edges

Images restored from trash cannot be processed

The image output dimensions can on some cameras be a little smaller than the dimensions supplied bythe camera manufacturer. This will result in a slightly smaller image when developed. An example of thiscould be the Canon EOS 300D / Rebel, when you output the full image in Capture One the dimensions are3072 x 2040 where as the Camera specification says 3072x2048. Currently no work around

RAW file support

RAW files from the following cameras are supported in Capture One PRO:

Phase One:

P 45+, P 30+, P 21+, P 25+, P 20+

P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 10, H 101, H 5, LightPhaseCanon:

Canon 1D Mark III, 1Ds Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D

5D, 40D, 30D, 20D, 10D, 400D/Rebel XTi, 350D/Rebel XT, 300D/Rebel, D60, D30

Pro 1, G9, G6, G5, G3, G2Nikon:

D3, D2Xs, D2X, D1X, D2Hs, D2H, D1H, D300, D200, D100, D80, D70s, D70, D50, D40X, D40Fuji:


2/3

S5 Pro, S3 Pro, S2 ProPentax:

K10D, K100D, *istDL2, *istDL, *istD, *istDS2, *istDS

Olympus: E-510, E-500, E-410, E-400, E-3, E-1, E-10, E-20, E-330, E-300

C-7070, C-8080Konica Minolta:

Alpha 5 D / Maxxum 5 D / Dynax 5 D

Alpha 7 D / Maxxum 7 D / Dynax 7 D

A1, A2Epson

R-D1s, R-D1Leica

M8, DIGILUX 3, Digital Module R for R8 and R9 camerasSony

(alpha) DSLR-A100, DSC-R1

Tethered camera supportCapture One PRO has tethered support for the following cameras:

Phase One:

P 45+, P 30+, P 21+, P 25+, P 20+

P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhaseCanon:

1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D

5D, 20D, 10D, 350D/Rebel XT, 300D/Rebel, D60, D30

DownloadingBefore downloading Capture One, make sure your computer meets the following system requirements:

Pentium III or faster Operating system: Windows XP or Windows 2000

512 MB of RAM or more (2 GB or more recommended when used with Phase One P-backs)

At least 2 GB of free disk space

Phase One provides Capture One in the following languages: English, German, French, Italian, Spanish,Japanese, Chinese (simplified), Chinese (traditional), Swedish, Czech, Dutch, Portuguese and Korean.

On Windows 2000 and XP the traditional Chinese version can only be run in a true traditional Chinese environment.At this time you cannot run a mixed English and Chinese environment.

To get the latest version of Capture One, visit:http://www.phaseone.com/download

InstallingBefore you install, make sure your system date and time is set correct. The Capture One trial mechanism canexpire if you move your system date backwards after installing Capture One. There is no way to re-enable your trialperiod if you change your date after installing Capture One.

If you install into an existing installation of Capture One, it is recommended that you take a backup of your settingsbefore installing the new version.

To begin the installation, unzip the downloaded package and click SetupXX.exe (where XX is either PRO, DB or


3/3

Documents

ReleaseNotePRO v378 Win