Release Notes

COMPRION SIMfony LTE

COMPRION LTE CMW500 Network Simulation Controller R4.10.3

for R&SCMW500

To be used in combination with

IT Test Platform R4.10.3 or IT Prove! R4.10.3

August 2013

Release Notes for COMPRION LTE CMW500 Network Simulation Controller R4.10.23 2

Release Notes for COMPRION LTE CMW500 Network Simulation Controller R4.10.3

Information Description of the COMPRION Network Simulation Controller R4.10.3 Summary: The COMPRION LTE CMW500 Network Simulation Controller R4.10.3 is part of the COMPRION SIMfony LTE family and to be used in combination with the IT Test Platform R4.10.3 or the IT Prove R4.10.3 with the enabled module IT3 Network Simulation Services. The COMPRION LTE CMW500 Network Simulation Controller R4.10.3 has to be installed on the network emulator R&SCMW500 after the R&SCMW500 software has been in-stalled as follows for USIM/USAT tests according to 3GPP TS 31.121/ 3GPP TS 31.124/VZW LTE USAT/USIM: Updated: Software required for COMPRION SIMfony LTE CMW500, LTE only Test Cases CMW-KP500 CMW-LTE RS V29.27.2.217 CMW-KP505 CMW-LTE STACK MLAPI V29.27.1202.155 CMW-KT010 Project Explorer (MCT-Tools) V8.25.17.491 CMW-KT011 Message Analyzer (MCT-Tools) V8.25.17.491 CMW Base SW V3.0.12

CMW PTLI V3.0.31 CMW DAU Support SW V3.0.11

CMW-KA100 IP Appl Enabling IPV4 Version same as Base SW, only SW license required

CMW-KA150 IP Appl Enabling IPV6 Version same as Base SW, only SW license required

CMW-KM50 Data application measurement Version same as Base SW, only SW license required

CMW-KP080 Protocol Tester Framework, Network emulation

CMW-Documentation V29.27.2.30 CMW-UPC Stack V5.62.0.19 For operation of test cases in LTE TDD frequency bands: KP550 LTE Stack Extension: LTE TDD Stack Extensions

(Version and SW same as CMW-KP505, only SW license required)

Release Notes for COMPRION LTE CMW500 Network Simulation Controller R4.10.23 3

Additional Software required for COMPRION SIMfony LTE CMW500, USIM MRAT TC 7.2.6 and 7.2.7 CMW-KF530 LTE MLAPI WCDMA HO SCN V29.27.200.32 CMW-WCDMA STACK MLAPI V29.27.500.56 CMW-LTE/WCDMA Handover RS V29.27.2.26 CMW-KF520 LTE MLAPI GSM H/O SCN V29.27.202.28 CMW-GSM STACK MLAPI V29.27.2143.39 CMW-LTE/GSM Handover RS V29.27.2.20 Hardware requirements for the R&SCMW500 1x CMW-PS502 CMW500 Wideband Radio Communication Tester, Mainframe 2x CMW-B300A H300A Signalling Unit Wideband (SUW) 1x CMW-B570B H570B RF Converter Module (TRX) (2nd TRX, 1st TRX is already included in CMW-PS502) Further mandatory components to operate CMW PS502 are not listed here.

For GSM MRAT USIM LTE TCs: 1x CMW-B200A H200A Signaling Unit Universal (SUU) 1x CMW-B210A GSM/GPRS/EDGE Signaling Extension Module Mandatory according to R&S for protocol testing: 1x CMW-B450A Data Application Unit COMPRION LTE CMW500 Network Simulation Controller R4.10.3

is used to exchange data like synchronisation and information messages, configura-tion files, logs, etc. between the IT Platform R4.10.3/IT Prove R4.10.3 and the R&SCMW500,

allows viewing of the messages between both systems,

is used for license handling of the COMPRION control software and test cases on the R&SCMW500,

is required to execute tests of "COMPRION LTE CMW500 3GPP TS 31.121 USIM USS Set 2" R4.10.3

is required to execute tests of "COMPRION LTE CMW500 3GPP TS 31.124 USIM USS Set 3" R4.10.3

Release Notes for COMPRION LTE CMW500 Network Simulation Controller R4.10.23 4

Prerequisite: Please read the "Quick Installation Guide COMPRION SIMfony LTE" and follow the instruc-tions therein carefully before executing tests. Please make sure that the R&SCMW500 software has been installed on the R&SCMW500 system as described above. For LTE only TCS, it is recommended to check the correct working of the R&SCMW500 before by running an example test scenario of CMW-KF500 LTE SAMPLE SCN V29.27.200.260 which is provided together with LTE FDD MLAPI (CMW-LTE RS, CMW-KP500) the by R&S. For MRAT - LTE TCS, it is recommended to check the correct working of the R&SCMW500 before by running an example test scenario of CMW-KF530 LTE MLAPI WCDMA HO SCN V29.27.200.32 CMW-KF520 LTE MLAPI GSM H/O SCN V29.27.202.28 Note: installing this version of the LTE SAMPLE SCN (LTE MLAPI WCDMA HO SCN / LTE MLAPI GSM H/O SCN ) implicitly assures the correct installation of all other required SW components in the correct version on CMW500 ! Note: for use of COMPRION LTE CMW500 Network Simulation Controller R4.10.3 to execute test cases from COMPRION OTAbility, a different SW configuration on CMW500 has to be used and is described in clause 1.3 of Quick Installation Guide IT3 OTAbility. Please note: COMPRION does not provide a download of the required R&SCMW500 software. If re-quired please contact Rohde&Schwarz (http://www2.rohde-schwarz.com/) to retrieve the required R&SCMW500 software. Description of the modifications from R4.10.2 to R4.10.3. Summary:

Improvement of backwards compatibility as to be used also with COMPRION OTAbility TCs based on MLAPI 28.35.

handling of 3G parameters setting supported in line with 29.27 MLAPI

bug fix for execution of test cases in TDD frequency bands and using DEFAULT set-tings from Test Case Manager

Editorial update of version number.