Upload
liliana-robinson
View
217
Download
1
Embed Size (px)
Citation preview
1 Reinhard Manns / PL20
JUMO CTI-500
PL20PL20
Analytical measurment systemsAnalytical measurment systems
2 Reinhard Manns / PL20
1 Target groups / Application
• General water technology
• Monitoring of coolingwater
• Cleaning baths (e.g. galvanic)
• Intake to internal waste water plants
• Monitoring of drinking water
• Bottle cleaning plants
• CIP-cleaning (up to max. 100°C; Dairies)
5 Reinhard Manns / PL20
2.1 Gerätekonzept Blockschaltbild
Block diagram JUMO CTI - 500
Signal preparation:
•Using temperature compensation at conductivity signal
output conductivity: temperature compensated conductivity signal
0(4)... 20mA 0(2)... 10V 20... 0(4)mA 10... 0(2)V
SETUP-Connection:Configuration/Parametrierung
Power supply:DC 24V (DC19..30V)
Measuring cell: inductive cell Temperature sensor
Binary inputs: 2
relay: 2 X Halbleiterschalter
AC/DC 15..50V; 200mA
output temperature: 0(4)... 20mA 0(2)... 10V 20... 0(4)mA 10... 0(2)V
Operation: LC-Grafic display 4-Keys 2-LED´s
6 Reinhard Manns / PL20
2.2 Concept applications
Features:
• cost effective devise
• compacte size
• Devices
• Head transmitter
• stand alone version
7 Reinhard Manns / PL20
2.2 Concept
Features:
• Operating / Programming
• Keyboard and Display
• Setup-program
• comfortable programming
• System documentation
• Power supply
• DC 19…31V
8 Reinhard Manns / PL20
2.3 Measuring areas
Features:
• Measuring area freely configurable
• Measuring areas
• 0 … 500µS/cm
up to
• 0 … 2000mS/cm
• up to 4 areas activated
9 Reinhard Manns / PL20
2.4 Measuring units
Features:
• Units
• µS/cm
• mS/cm
• %
• 5 signs freely editable
10 Reinhard Manns / PL20
2.4 Measuring units
Features:
• Concentration measuring
• Soda lye NaOH
• Nitric acid HNO3
• 1 X free definable graph (entering 20 pairs of variates with setup-programm)
11 Reinhard Manns / PL20
2.5 Temperature input
Features:
• Units (Temperature)
• °C
• °F
• Temperature sensor
• fast response
resp..
• Protected Fitting inside the measuring cell
12 Reinhard Manns / PL20
2.6 Compensation
Features:
• Form of temperature compensation
• linear
• natural water (EN 27888)
• own characteristic curve (Learnfunction)
• activate up to 4 values
13 Reinhard Manns / PL20
2.7 Outputs
Features:
• 2 analog continuous outputs for conductivity / resitance and parallel for temperature (electrical isolated)
• 0/4..20mA
• 0..10V
• 20..4/0mA
• 10..0V
• freely programmable in measuring areas
14 Reinhard Manns / PL20
2.7 Outputs
Features:
• 2 integrated potential free contacts (semi conductor switches)
• 0,2 A, AC 14…50V• 0,2 A, AC 14…50V
15 Reinhard Manns / PL20
2.8 General concept
Features:
• 2 binary inputs (the function is aktivated by a potential free contact)
• keyboard locking
• changing measuring areas
• changing temperature coefficent
• desalinisation function
16 Reinhard Manns / PL20
2.8 General concept
Features:
• Connections
• PVC T-part DN32
• PVC T-part DN40
• Clamp 2 ½”
• screwed pipe fitting DN50, DIN 11 851(MK DN50, milk cone)
• SMS 2”
18 Reinhard Manns / PL20
2.8 General concept
Features:
• Display
Output-ModusHAND (Hand-Mode)HOLD (Hold-Mode)
K1 K2 E1 E2 ALARM HAND
MESSUNG 10.24 18.5 °C mg/l
contactsIf visible contact is activ
Binary inputsIf visible input is activ
InformationsALARM (e.g.Overrange)KALIB flashing (kalibration timer ended)KALIB (kalibration aktiv)
Activitymeasurement (normal)
Temperature and unit value and unit
Informations
19 Reinhard Manns / PL20
2.8 General concept
Features:
• languages
• german
• english
• french
• spanish
• polish
20 Reinhard Manns / PL20
3. Application
Desalinisation in cooling towers
During the process you have to consider the following points: • water has to be refilled (by permanent evaporation water is getting lost)
• change water in sporadic intervals (Desalinisation: by permanent evaporation the liquid is going away, but the ingredients (salt) are increasing. The conductivity is getting higher; deposits in the tubes.
• You have to prevebt the growth of algae (Addition of biocide; in closed systems is a permanent growth of algae possible; that contaminated the cooling tower and could make problems in process e.g. the degree of efficiency is getting down. Therefor you have to add biocides in periodic lags. A secondary effect is the growing of the conductivity.)
21 Reinhard Manns / PL20
3. Application
Conductivity measurement on cooling towers(max. conductivity app. 2000…3000µS/cm)
JUMO CTI - 500
22 Reinhard Manns / PL20
3.1 Possible application
• General water technology
• Monitoring of cooling water
• Air conditions
• Cleaning baths (e.g. controlling of galvanic bath)
• betriebliche Endkontrollen